Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Waveforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Optimal space communications techniques

Digital multiplication of two waveforms using delta modulation (DM) is discussed. It is shown that while conventional multiplication of two N bit words requires N2 complexity, multiplication using DM requires complexity which increases linearly with N. Bounds on the signal-to-quantization noise ratio (SNR) resulting from this multiplication are determined and compared with the SNR obtained using standard multiplication techniques. The phase locked loop (PLL) system, consisting of a phase detector, voltage controlled oscillator, and a linear loop filter, is discussed in terms of its design and system advantages. Areas requiring further research are identified.

Schilling, D. L.↗

Design of FIR digital filters for pulse shaping and channel equalization using time-domain optimization

Three algorithms are developed for designing finite impulse response digital filters to be used for pulse shaping and channel equalization. The first is the Minimax algorithm which uses linear programming to design a frequency-sampling filter with a pulse shape that approximates the specification in a minimax sense. Design examples are included which accurately approximate a specified impulse response with a maximum error of 0.03 using only six resonators. The second algorithm is an extension of the Minimax algorithm to design preset equalizers for channels with known impulse responses. Both transversal and frequency-sampling equalizer structures are designed to produce a minimax approximation of a specified channel output waveform. Examples of these designs are compared as to the accuracy of the approximation, the resultant intersymbol interference (ISI), and the required transmitted energy. While the transversal designs are slightly more accurate, the frequency-sampling designs using six resonators have smaller ISI and energy values.

Houts, R. C.↗

Engineering studies related to the GEOS-C radar altimeter

Experiment requirements, technical characteristics, and GEOS-C radar altimeter related analyses are discussed along with results of a study on engineering test data requirements. Statistical analyses related to determination of wave height resolution achievable as a function of system characteristics and averaging period are described, in addition to a discussion on the desirability of using computer procedures to compensate for altitude tracker time-jitter. Data processing considerations for the GEOS-C system are examined. An extensive analysis of the spatial filter effect is given and results of a computation of geoidal power spectral density, based on Skylab altimeter data, is displayed and interpreted in terms of projected GEOS-C random errors. This information is then used in deriving minimum-mean-square filter procedures for both geoid undulation and slope data. The characteristics of mean received waveforms as a function of off-nadir angle are used to obtain tracker bias as a function of sea state and pointing angle. The angle estimation process proposed by the GEOS-C hardware contractor is also investigated from a standpoint of achievable angular resolution.

Miller, L. S.↗

Analysis of satellite altimeter signal characteristics and investigation of sea-truth data requirements

Results are presented of analysis of satellite signal characteristics as influenced by ocean surface roughness and an investigation of sea truth data requirements. The first subject treated is that of postflight waveform reconstruction for the Skylab S-193 radar altimeter. Sea state estimation accuracies are derived based on analytical and hybrid computer simulation techniques. An analysis of near-normal incidence, microwave backscattering from the ocean's surface is accomplished in order to obtain the minimum sea truth data necessary for good agreement between theoretical and experimental scattering results. Sea state bias is examined from the point of view of designing an experiment which will lead to a resolution of the problem. A discussion is given of some deficiencies which were found in the theory underlying the Stilwell technique for spectral measurements.

Source record↗

Engineering studies related to Skylab program

The relationship between the S-193 Automatic Gain Control data and the magnitude of received signal power was studied in order to characterize performance parameters for Skylab equipment. The r-factor was used for the assessment and is defined to be less than unity, and a function of off-nadir angle, ocean surface roughness, and receiver signal to noise ratio. A digital computer simulation was also used to assess to additive receiver, or white noise. The system model for the digital simulation is described, along with intermediate frequency and video impulse response functions used, details of the input waveforms, and results to date. Specific discussion of the digital computer programs used is also provided.

Hayne, G. S.↗

Gust alleviation for a STOL transport by using elevator, spoilers, and flaps

Control laws were developed to investigate methods of alleviating the response of a STOL transport to gusty air. The transport considered in the study had triple-slotted, externally blown jet flaps and a large T-tail. The control devices used were the elevator, spoilers, and flaps. A hybrid computing system was used to simulate linearized longitudinal dynamics of the aircraft and to implement a conjugate gradient optimal search algorithm. The aircraft was simulated in the low-speed approach condition only. Feedback control matrices were found which minimized the average of a quadratic functional involving passenger compartment accelerations, pitch angle and rate, flight path angle and speed variations. The optimization was performed for artificially designed gust inputs in the form of predetermined rectangular waveforms. Results were obtained for elevator, spoilers, and flaps acting singly and in combination. Additional results were obtained for unit sinusoidal gust inputs by using the gain matrices computed for the artificial test gusts. Various sensor configurations were also investigated.

Lallman, F. J.↗

Experimental investigation of aeronautical and maritime communications and surveillance using satellites

The experimental program described included an evaluation of every significant factor affecting the accuracy of position fixing by range measurements from geostationary satellites. The tone-code ranging technique was found to provide a precision of roughly 0.1 n mi at mid-lattitudes with one range measurement at L-band and one at VHF. The factors which introduce bias errors were studied analytically and experimentally, and means of rectifying the bias errors were developed. An operational system at L-band may be expected to provide position fix accuracy of 0.1 n mi over large regions of the earth. The ranging technique developed within this program is digital, and uses a single signalling waveform and a single modem for communications and ranging.

Anderson, R. E.↗

Effect of channel errors on delta modulation transmission

We have considered the response of a variable step size delta modulator communication system, to errors caused by a noisy channel. For the particular adaptive delta modulation scheme proposed by Song, Garodnick, and Schilling (1971), we have a simple analytic formulation of the output error propagation due to a single channel error. It is shown that single channel errors cause a change in the amplitude and dc level of the output, but do not otherwise affect the shape of the output waveform. At low channel error rates, these effects do not cause any degradation in audio transmission. Higher channel error rates cause overflow or saturation of the step size register. We present relationships between channel error rate, register size, and the probability of register overflow.

Rosenberg, W. J.↗

Geophysical properties of the ionospheric irregularities responsible for radio scintillation

The properties of F-region ionospheric irregularities are described based on in-situ measurements of the actual waveforms of ion concentration. The spectral properties of the irregularities are discussed. In high, middle and low latitudes most of the irregularities observed fall into a single 'noiselike' category having power spectra which can be approximated by f to the negative n-th power and S to the n-th power, where S is the irregularity scale size and n is approximately 2. Thus the spectral components have a maximum gradient which is almost independent of their size. Other categories of irregularities are also observed occasionally.

Mcclure, J. P.↗

The S-193 radar altimeter experiment

The Skylab S-193 altimeter experiment utilizes a 10- and 100-ns pulse length, 13.9-GHz earth-pointed radar system to obtain earth-surface backscatter measurements from the Skylab spacecraft. Objectives of the experiment are to obtain precision measurements of surface profile for uses in geodesy, oceanography, and earth physics, and to measure radar-signal characteristics from an earth-orbit geometry to provide design information for future radar remote-sensors. The technical approach is that of measuring the power impulse response of the scattering surface. The hardware is designed to operate in five modes: waveform or impulse-response measurement and altitude determination; radar cross-section experiment; signal correlation experiment; 10-nsec pulse-compression evaluation; and nadir-seeker experiment.

Mcgoogan, J. T.↗

Automated data acquisition and reduction system for torsional braid analyzer

Automated Data Acquisition and Reduction System (ADAR) evaluates damping coefficient and relative rigidity by storing four successive peaks of waveform and time period between two successive peaks. Damping coefficient and relative rigidity are then calculated and plotted against temperature or time in real time.

Carl, G. L.↗

Techniques for decoding speech phonemes and sounds: A concept

Techniques studied involve conversion of speech sounds into machine-compatible pulse trains. (1) Voltage-level quantizer produces number of output pulses proportional to amplitude characteristics of vowel-type phoneme waveforms. (2) Pulses produced by quantizer of first speech formants are compared with pulses produced by second formants.

Lokerson, D. C.↗

Computer modeling of arc drivers

Model is generated from description of element connections involved in complete arc network, list of corresponding circuit element values, description of circuit current excitation, and list of out-puts desired. Waveform of current is determined by structure of capacitor storage system, driver geometry, and preset driver conditions.

Dannenberg, R. E.↗

Engineering studies related to the Skylab program

The problem of analysis and interpretation of the waveform related data from the radar altimeter experiment is presented. The computer programs developed or modified for the realignment processes are briefly discussed.

Hayne, G. S.↗

Spoke wavenumbers and mode transitions in the NASA Lewis bumpy torus

Waveforms of fluctuations of plasma potential, resulting from rotating electron and ion charge concentrations, were observed in a bumpy torus. Since these fluctuations were thought to be spoke rotations in the direction of the ExB drift, measuring the direction of spoke rotation should determine the direction of the electric fields over much of the plasma surface. A Langmuir probe was inserted into the plasma to measure the floating potential of the plasma, hence the direction of the electric field could be checked another way.

Gerdin, G. A.↗

Finite difference methods for transient signal propagation in stratified dispersive media

Explicit difference equations are presented for the solution of a signal of arbitrary waveform propagating in an ohmic dielectric, a cold plasma, a Debye model dielectric, and a Lorentz model dielectric. These difference equations are derived from the governing time-dependent integro-differential equations for the electric fields by a finite difference method. A special difference equation is derived for the grid point at the boundary of two different media. Employing this difference equation, transient signal propagation in an inhomogeneous media can be solved provided that the medium is approximated in a step-wise fashion. The solutions are generated simply by marching on in time. It is concluded that while the classical transform methods will remain useful in certain cases, with the development of the finite difference methods described, an extensive class of problems of transient signal propagating in stratified dispersive media can be effectively solved by numerical methods.

Lam, D. H.↗

Suppression of nonlinear oscillations in combustors with partial length acoustic liners

An analytical model is formulated for a three-dimensional nonlinear stability problem in a rocket motor combustion chamber. The chamber is modeled as a right circular cylinder with a short (multi-orifice) nozzle, and an acoustic linear covering an arbitrary portion of the cylindrical periphery. The combustion is concentrated at the injector and the gas flow field is characterized by a mean Mach number. The unsteady combustion processes are formulated using the Crocco time lag model. The resulting equations are solved using a Green's function method combined with numerical evaluation techniques. The influence of acoustic liners on the nonlinear waveforms is predicted. Nonlinear stability limits and regions where triggering is possible are also predicted for both lined and unlined combustors in terms of the combustion parameters.

Espander, W. R.↗

TDRSS telecommunications study, phase 2

Providing an extension to parametric analysis of the telecommunications support capability of the Tracking and Data Relay Satellite System (TDRSS), this phase considers candidate modulation waveforms which could meet the shuttle telecommunications requirements and also be compatible with the TDRSS single access S-band service. In addition, it considers the feasibility of modifying a single access S-band user transponder for operation with conventional STDN signals emanating from remotely located ground stations.

Cahn, C. R.↗