SEARCH · Engineering Papers

Results for “Transversity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1983

An endochronic model for the response of unidirectional composites under off-axis tensile load

A methodology of modelling both nonlinear elastic and dissipative response of transversely isotropic fibrous composites is developed and illustrated with the aid of the observed response of graphite-polyimide off-axis coupons. The methodology is based on the internal variable formalism employed within the text of classical irreversible thermodynamics and entails extension of Valanis' endochronic theory to transversely isotropic media. Applicability of the theory to prediction of various response characteristics of fibrous composites is illustrated by accurately modelling such often observed phenomena as: stiffening reversible behavior along fiber direction; dissipative response in shear and transverse tension characterized by power-laws with different hardening exponents; permanent strain accumulation; nonlinear unloading and reloading; and stress-interaction effects.

Pindera, M. J.↗

NASA NTRS1984

The Chemical Nature of the Fiber/resin Interface in Composite Materials

Carbon fiber/epoxy resin composites are considered. The nature of the fiber structure and the interaction that occurs at the interface between fiber and matrix are emphasized. Composite toughness can be improved by increased axial tensile and compressive strengths in the fibers. The structure of carbon fibers indicates that the fiber itself can fail transversely, and different transverse microstructures could provide better transverse strengths. The higher surface roughness of lower modulus and surface-treated carbon fibers provides better mechanical interlocking between the fiber and matrix. The chemical nature of the fiber surface was determined, and adsorption of species on this surface can be used to promote wetting and adhesion. Finally, the magnitude of the interfacial bond strength should be controlled such that a range of composites can be made with properties varying from relatively brittle and high interlaminar shear strength to tougher but lower interlaminar shear strength.

Diefendorf, R. J.↗

NASA NTRS1985

Diagnosis of ageostrophic circulations in a two-dimensional primitive equation model of frontogenesis

A two-dimensional primitive equation frontogenesis model is applied to the identification of dynamical mechanisms which contribute to transverse ageostrophic circulation in warm and cold advection situations. Attention is focused on conditions conducive to significant alongfront ageostrophic flow with divergence confined to the transverse plane. The circulation is partitioned as a function of forcing mechanisms accompanied by confluence, horizontal shear and the alongfront component of the ageostrophic wind. A series of diagnostic equations is defined for the transverse geostrophic circulation and instantaneous contribution from each partitioned component of the circulation are quantified. In the cold advection case, results are obtained which are consistent with positive feedback between the subsidence pattern and forcing by horizontal shear.

Keyser, D.↗

NASA NTRS1985

p(2 x 2) and c(2 x 2) coverages of Cl and F on Ni(100), a comparison with O and S on Ni(100)

The rigid lattice adsorbate vibrational frequency normal to the surface, omega(e,r) and height above the surface, R(transverse), are computed for p(2 x 2) (0.25 ML) and c(2 x 2) (0.5 ML) coverages of Cl and F. These calculations show a small change in omega(e,r) and a small increase in R(transverse) with increased coverage. The bonding of Cl and F is compared to that found for O and S, both of which show a decrease in R(transverse) and O which shows a larger shift in omega(e,r).

Bauschlicher, C. W., Jr.↗

NASA NTRS1986

Creep properties of PWC-11 base metal and weldments as affected by heat treatment

In a preliminary study using single specimens for each condition, PWC-11 (a niobium-base alloy with a nominal composition of Nb-1%Zr-0.1%C) was creep tested at 1350 K and 40 MPa. Base metal specimens and specimens with transverse electron beam welds were tested with and without a 1000 hr, 1350 K aging treatment prior to testing. In the annealed condition (1 hr at 1755 K + 2 hr at 1475 K), the base metal exhibited superior creep strength compared to the nonaged condition, reaching 1 percent strain in 3480 hr. A 1000 hr, 1350 K aging treatment prior to creep testing had a severe detrimental effect on creep strength of the base metal and transverse electron beam weldments, reducing the time to attain 1 percent strain by an order of magnitude. Extrapolated temperature compensated creep rates indicate that the present heat of PWC-11 may be four times as creep resistant as similarly tested Nb-1%Zr. The extrapolated stress to achieve 1 percent creep strain in 7 yr at 1350 K is 2.7 MPa for annealed Nb-1%Zr and 12 MPa for annealed and aged PWC-11 base metal with and without a transverse electron beam weld.

Titran, R. H.↗

NASA NTRS1985

Mean-flow measurements in a supersonic three-dimensional turbulent boundary layer

Measurements are presented of the mean flow in a supersonic turbulent boundary layer subjected to a constant weak transverse pressure gradient. The temperature and longitudinal velocity and the axial shear stress were only slightly affected by the three-dimensionality but a clearly defined crossflow component appeared, in the manner suggested by theory and confirmed in earlier experiments. The flow deflection angle and transverse-velocity component achieved a self-preserving form so long as the transverse-pressure gradient remained constant, and both achieved a maximum at the sublayer edge; the deflection angle seemed to decrease again between the latter and the surface. An empirical relation was found between the pressure-gradient strength and the maximum in the crossflow, and the dependence of the latter on distance from the surface was used to test analytical crossflow predictions. The data are in general agreement with Van Den Berg's law of the wall. The data also support the so-called parabolic law following a relaxation distance, especially if inviscid gradients are accounted for, and if the normal coordinate is contracted by the compressibility transformation.

Demetriades, A.↗

NASA NTRS1986

Diagnosis of the role of vertical deformation in a two-dimensional primitive equation model of upper-level frontogenesis

In the present equations for the temporal rates of change of the magnitudes of potential temperature and absolute momentum vector gradients that are projected onto vertical planes transverse to straight frontal zones, the terms involving the transverse ageostrophic circulation are of the same mathematical form, and in a kinematic sense are also analogous to, the divergence and deformation terms that involve the horizontal wind field in Pettersen's (1936) classic equation for frontogenesis in the potential temperature field. The proposed frontogenesis equation form for the magnitude of the potential temperature gradient in the transverse plane is illustrated with the results of two simulations from an idealized, two-dimensional primitive equation model in which upper level frontogenesis proceeds by very different mechanisms.

Keyser, D.↗

NASA NTRS1985

Coherent and incoherent lidar - An overview

Characteristics of coherent and incoherent lidars are described. The carrier-to-noise ratio (CNR), SNR relationship, coherence diameter, speckle averaging, multiple pulse averaging, and the possibility of single-frequency pulse generation from the laser transmitter for the two lidar types are compared. Diagrams of the incoherent lidar's direct detection system and the coherent lidar's heterodyne detection system are presented. The transverse coherence diameter is discussed and equations for backscatter from a distributed medium, transverse coherence length, and return path refractive index variations are provided. The importance of transverse coherence length in the coherence lidar system design is considered. The effectiveness of the lidar systems is evaluated in terms of CNR and SNR. The differences in generation of noise-equivalent power are studied and it is observed that the coherent lidar system achieves higher CNR values. The relation between signal fluctuation due to speckle effects and SNR is analyzed; equations for SNR in coherent and incoherent lidar systems are given.

Menzies, R. T.↗

NASA NTRS1986

Parameterized materials and dynamic response characterizations in unidirectional composites

The values of phase velocities of ultrasonic waves in transversely isotropic media are presented in terms of the fiber volume fraction of a unidirectional fiberglass epoxy composite with constant matrix properties and the ratio between extensional moduli in the longitudinal and transverse directions of the composite when the properties of the fibers are changed, at a constant fiber volume fraction. The model of a homogeneous transversely isotropic medium is adopted to describe the relations between elastic properties and velocities. The displacements due to an oscillatory point source in an infinite medium are used as one measure of comparison of the behavior of the unidirectional composite according to the variations of the parameters, as described above. Values of phase velocities, elastic moduli, Poisson's ratios and displacements due to a point source can be read from the parameterized plots for a known fiber volume fraction or a known ratio between extensional moduli of the composite. Alternatively fiber volume fraction and the ratio between extensional moduli can be inferred from the plots when the values of the phase velocities are known; for example from experimental measurements. Therefore, such parameterized curves may be useful in nondestructive mechanical property and material degradation characterizations.

Williams, J. H., Jr.↗

NASA NTRS1986

On mixed and displacement finite element models of a refined shear deformation theory for laminated anisotropic plates

An improved plate theory that accounts for the transverse shear deformation is presented, and mixed and displacement finite element models of the theory are developed. The theory is based on an assumed displacement field in which the inplane displacements are expanded in terms of the thickness coordinate up to the cubic term and the transverse deflection is assumed to be independent of the thickness coordinate. The governing equations of motion for the theory are derived from the Hamilton's principle. The theory eliminates the need for shear correction factors because the transverse shear stresses are represented parabolically. A mixed finite element model that uses independent approximations of the displacements and moments, and a displacement model that uses only displacements as degrees of freedom are developed. A comparison of the numerical results for bending with the exact solutions of the new theory and the three-dimensional elasticity theory shows that the present theory (and hence the finite element models) is more accurate than other plate-theories of the same order.

Reddy, J. N.↗

NASA NTRS1986

Effect of fiber anisotropy on thermal stresses in fibrous composites

An elasticity solution is utilized to analyze an orthotropic fiber in an isotropic matrix under uniform thermal load. The analysis reveals that stress distributions in the fiber are singular in the radial coordinate when the radial fiber stiffness (C-rr) is greater than the hoop stiffness (C-theta-theta). Conversely, if C-rr is less than C-theta-theta the maximum stress in the composite is finite and occurs at the fiber-matrix interface. In both cases the stress distributions are radically different than those predicted assuming the fiber to be transversely isotropic (C-rr = C-theta-theta). It is also shown that fiber volume fraction greatly influences the stress distribution for transversely isotropic fibers, but has little effect on the distribution if the fibers are transversely orthotropic.

Avery, W. B.↗

NASA NTRS1987

Impact-induced fracture in a quasi-isotropic laminate

A systematic study of impact-induced fracture in a quasi-isotropic laminated composite is carried out. The main focus of the study is to understand damage initiation when a laminate is subjected to the impact of a foreign object. The total incipient damage of a laminate subjected to impact at higher than threshold velocity is also presented. The incipient damage is restricted to small growth from the initiation of the damage. The experimentally collected data are interpreted using a two-dimensional plane-strain finite-element analysis. The qualitative comparison suggests that the skew cracks in the proximal layers are primarily due to transverse shear stress. Skew cracks in the middle layers are also due to transverse shear stress. Vertical cracks in the distal layer are due to flexural stress transverse to the fiber orientation of the layer.

Joshi, S. P.↗

NASA NTRS1986

Sample band spreading phenomena in ground and space-based electrophoretic separators

Sample stream spreading in the transverse direction (direction perpendicular to the chamber center plane) is calculated for two ground-based and one space-based continuous flow electrophoresis chambers. The magnitude of transverse sample stream spreading is shown to be a function of the difference in electrical conductivity between the sample and curtain buffer. Sample/buffer conductivity mismatch distorts the normally uniform electrical field in the vicinity of the sample to produce transverse field components which, in turn, deflect sample material toward the chamber walls. These results indicate that nongravity effects are important and must be resolved in order for space-based continuous flow electrophoresis to achieve its maximum potential.

Rhodes, Percy H.↗

NASA NTRS1988

Laser Anemometer For Turbine Research

Three velocity components measured through one port. Laser anemometer combines conventional interference-fringe anemometer configuration with Fabry-Perot interferometer to enable simultaneous measurement of radial and transverse velocities. Transverse-velocity axis rotated, enabling measurement of both transverse-velocity components. Does not require large optical-access port for measurement of radial velocity.

Seasholtz, Richard G.↗

NASA NTRS1987

On the wave excitation in the turbulent meteor trace

The solution to the problem of excitation of longitudinal and transverse electromagnetic waves in randomly inhomogeneous media is reduced to the derivation of a complex effective dielectric constant (EDC) tensor which nonlocally connects together the average macroscopic electromagnetic fields in continuous media, it is implied that the field values which are rapidly fluctuating on a microscopic scale in space and time become smoothed out in a specified way due to the inhomogeneous mixing of diffusion. Proceedings from the derived general expression for the EDC tensor new modes of longitudinal and transverse electromagnetic wave generation due to fluctuation in the parameters of the medium was predicted. In this connection, it is of interest to investigate the peculiarities of electromagnetic longitudinal and transverse wave propagation in such randomly inhomogeneous media where, apart from the charged particle concentration change, the random spatial and temporal changes of natural frequency of closely located oscillators take place.

Jandieri, G. V.↗

NASA NTRS1988

Input-output characterization of fiber composites by SH waves

Input-output characterization of fiber composites is studied theoretically by tracing SH waves in the media. A fiberglass epoxy composite is modeled as a homogeneous transversely isotropic continuum plate. The reflection of an SH wave at a stress-free plane boundary in a semi-infinite transversely isotropic medium is considered first. It is found that an incident SH wave reflects only a similar SH wave back into the medium. It is also established that the angle of reflection of the reflected wave is equal to the angle of incidence of the incident wave. The phase velocity of the SH waves and the delay time of the SH waves in reaching the receiving transducer are computed as functions of a reflection index, defined as the number of reflections of the SH waves from the bottom face of the continuum plate. The directivity function corresponding to the shear stress associated with the SH waves in the continuum plate is also derived as a function of the reflection index. A theoretical output voltage from the receiving transducer is calculated for a tone burst (a periodic input voltage of finite duration). The output voltage is shown for tone bursts of duration 60 microseconds and center frequencies of 0.75, 1.00, and 1.25 MHz. The study enhances the quantitative and qualitative understanding of the nondestructive evaluation (NDE) of fiber composites which can be modeled as transversely isotropic media.

Renneisen, John D.↗

NASA NTRS1988

Linear instabilities in multicomponent plasmas and their consequences for the auroral zone

Ion conics are commonly observed along auroral-zone field lines and involve all major terrestrial ion species, including H, He, and O. It is believed that low-frequency plasma waves, driven unstable by field-aligned currents, transversely heat the ion distributions via wave-particles interactions, creating the ion conics. Considered here are low-frequency oblique electrostatic instabilities found in a mixed plasma that includes an electron beam streaming through a background of electrons, H and O. The addition of O not only modifies the lower hybird frequency, but allows the existence of an ion-ion (Buchsbaum) hybrid mode with a frequency between the H and O gyrofrequencies. Because of its low frequency, the ion-ion hybrid instability can be effective in transversely heating heavy ions. When the electron beam drift speed is greater than 3 times the background electron thermal velocity and the electron gyrofrequency to plasma frequency ratio is less than 10, the lower hybrid instability dominates. However, for ratios greater than 20, which is a condition commonly found in the auroral-zone nightside region, the ion-ion instability has the largest growth rates; in these regions, heavy ion transverse heating can occur. When the ratio is between 10 and 20, the H to O density ratio determines which instability dominates.

Schriver, David↗

NASA NTRS1988

Hygrothermal and strain-rate effects on properties of graphite/epoxy composites

The combined effects of moisture (M), temperature (T), and strain rate (SR) on the properties of the unidirectional graphite/epoxy composite AS4/3501-6 are investigated experimentally. Longitudinal tensile, in-plane shear, and transverse tensile specimens with moisture content 0 or 1 percent were characterized using standard mechanical tests and the techniques described by Yaniv et al. (1987) at temperatures 23-128 C and strain rates from 5 x 10 to the -6th/sec to 5/sec. The results are presented in graphs and discussed in detail. The longitudinal properties of the composite were found to be generally unaffected by changes in the parameters, whereas transverse and interlaminar properties decreased with increasing T and M at constant SR and the transverse and in-plane shear moduli increased with SR. A time-T-M equivalence principle is used to derive master curves for all the matrix-dominated properties, expressed in terms of a two-variable shift function.

Daniel, I. M.↗