Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRAJECTORIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Contingency Trajectory Design for a Lunar Orbit Insertion Maneuver Failure by the LADEE Spacecraft

This paper presents results from a contingency trajectory analysis performed for the Lunar Atmosphere Dust Environment Explorer (LADEE) mission in the event of a missed lunar-orbit insertion (LOI) maneuver by the LADEE spacecraft. The effects of varying solar perturbations in the vicinity of the weak stability boundary (WSB) in the Sun-Earth system on the trajectory design are analyzed and discussed. It is shown that geocentric recovery trajectory options existed for the LADEE spacecraft, depending on the spacecrafts recovery time to perform an Earth escape-prevention maneuver after the hypothetical LOI maneuver failure and subsequent path traveled through the Sun-Earth WSB. If Earth-escape occurred, a heliocentric recovery option existed, but with reduced science capability for the spacecraft in an eccentric, not circular near-equatorial retrograde lunar orbit.

Genova, Anthony L.↗
NASA NTRS2019

Mars Phoenix EDL Trajectory and Atmosphere Reconstruction Using NewSTEP

This document describes the trajectory and atmosphere reconstruction of the Mars Phoenix Entry, Descent, and Landing using the New Statistical Trajectory Estimation Program. The approach utilizes a Kalman filter to blend inertial measurement unit data with initial conditions and radar altimetry to obtain the inertial trajectory of the entry vehicle. The nominal aerodynamic database is then used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state. The reconstructed atmosphere pro le is then blended with pre-flight models to construct an estimate of the as-flown atmosphere.

Karlgaard, Christopher D.↗
NASA NTRS2015

Integration of Uncertain Ramp Area Aircraft Trajectories and Generation of Optimal Taxiway Schedules at Charlotte Douglas (CLT) Airport

The integration of aircraft maneuver characteristics into an optimal taxiway scheduling solution is challenging due to the uncertainties that are intrinsic to ramp area aircraft trajectories. To address the challenge, we build a stochastic model of ramp area aircraft trajectories that is used to generate a probabilistic measure of conflict within the Charlotte Douglas International Airport (CLT) ramp area. Parameters of the conflict distributions are estimated and passed to a Mixed Integer Linear Program that solves for an optimal taxiway schedule constrained to be conflict free in the presence of trajectory uncertainties. Here we extend our previous research by accounting for departing and arriving aircraft whereas our prior formulation only accounted for departing aircraft.

taxiway schedule↗
NASA NTRS2019

Accrued Delay Application in Trajectory-Based Operations

The air traffic management system lacks integration among its elements often due to using inconsistent information, models, and metrics about the traffic. Transitioning to trajectory-based operations, whereby flights are managed by full trajectories in space and time, will enable more integration, with the help of increased automation. Building on trajectory-based operations, an "accrued delay" metric is proposed, which continuously measures the amount of delay that a flight has accumulated up to the current time, including delays incurred during the current flight and inherited from previous flights through the turnaround process. Through a time-based metering and scheduling example, we show how using accrued delay as a metric can help integrate the decision-making across multiple decision horizons, leading to more efficient and balanced access to airspace services. We show that when prioritizing flights that have already accrued high delay because of a constrained runway resource, significant gains are achieved in terms of reducing total delay and its variance. We studied the sensitivity of these gains to numerous factors, such as time-based versus distance-based horizons, horizon size, and errors in conformance to scheduled times.

Idris, Husni↗
NASA NTRS2019

Low-Thrust Trajectory Design for a Cislunar CubeSat Leveraging Structures from the Bicircular Restricted Four-Body Problem

The upcoming Lunar IceCube (LIC) mission will deliver a 6U CubeSat to a low lunar orbit via a ride-share opportunity during NASAs Artemis 1 mission. This presents a challenging trajectory design scenario, as the vast change in energy required to transfer from the initial deployment state to the destination orbit is compounded by the limitations of the LICs low-thrust engine. This investigation addresses these challenges by developing a trajectory design framework that utilizes dynamical structures available in the Bicircular Restricted Four-Body Problem (BCR4BP) along with a robust direct collocation algorithm. Maps are created that expedite the selection of invariant manifold paths from a periodic staging orbit in the BCR4BP that offer favorable connections between the LIC transfer phases. Initial guesses assembled from these maps are passed to a direct collocation algorithm that corrects them in the BCR4BP while including the variable low-thrust acceleration of the spacecraft engine. Results indicate that the ordered motion provided by the BCR4BP and the robustness of direct collocation combine to offer an efficient and adaptable framework for designing a baseline trajectory for the LIC mission.

Pritchett, Robert↗
NASA NTRS2019

Low-Thrust Trajectory Design for A Cislunar CubeSat Leveraging Structures from the Bicircular Restricted Four-Body Problem

The upcoming Lunar IceCube (LIC) mission will deliver a 6U CubeSat to a low lunar orbit via a ride-share opportunity during NASAs Artemis 1 mission. This presents a challenging trajectory design scenario, as the vast change in energy required to transfer from the initial deployment state to the destination orbit is compounded by the limitations of the LICs low-thrust engine. This investigation addresses these challenges by developing a trajectory design framework that utilizes dynamical structures available in the Bicircular Restricted Four-Body Problem (BCR4BP) along with a robust direct collocation algorithm. Maps are created that expedite the selection of invariant manifold paths from a periodic staging orbit in the BCR4BP that offer favorable connections between the LIC transfer phases. Initial guesses assembled from these maps are passed to a direct collocation algorithm that corrects them in the BCR4BP while including the variable low-thrust acceleration of the spacecraft engine. Results indicate that the ordered motion provided by the BCR4BP and the robustness of direct collocation combine to offer an efficient and adaptable framework for designing a baseline trajectory for the LIC mission.

Pritchett, Robert↗
NASA NTRS2018

Integrated Optimization of Mars Hybrid Solar-Electric/Chemical Propulsion Trajectories

NASA’s Human Exploration and Operation Mission Directorate is developing a reusable hybrid transportation architecture in which both chemical and solar-electric propulsion systems are used to deliver crew and cargo to the Martian sphere of influence. By combining chemical and solar-electric propulsions into a single spacecraft and applying each where it is the most effective, the hybrid architecture enables a series of Mars trajectories that are more fuel efficient than an all chemical propulsion architecture without significant increase to trip time. Solving the complex problem of low-thrust trajectory optimization coupled with the vehicle sizing requires development of an integrated trajectory analysis frame- work. Previous studies have utilized a more segmented optimization framework due to the limitation of the tools available. A new integrated optimization framework was recently developed to address the deficiencies of the previous methods that enables higher fidelity analysis to be performed and increases the efficiency of large design space explorations.

Chai, Patrick R.↗
NASA NTRS2019

Hybrid Transportation System Integrated Trajectory Design and Optimization for Mars Landing Site Accessibility

NASA’s Mars Study Capability Team continues the agency’s efforts to study and refine the nation’s plan to field a sustainable human Mars campaign. One of the primary open issues left unanswered during previous analysis cycles was the uncertainty of the impact to the vehicle performance requirement to deliver crew and cargo to the same landing site across multiple mission opportunities. The Mars Study Capability Team has recently developed an integrated trajectory optimization and system closure model to solve the complex interplanetary trajectory optimization using both low-thrust and high-thrust maneuvers. This paper demonstrates the capability of this new integrated trajectory design and optimization method as it applies to the landing site accessibility problem for the Hybrid transportation architecture. The results showed that the current vehicle is capable of reaching up to +20 degree latitude and down to -20 degree latitude in every mission opportunity from 2033 to 2052. However, reaching latitudes beyond +/- 20 required more propellant than the spacecraft is currently designed to carry for many of the mission opportunities.

Chai, Patrick R.↗
NASA NTRS2020

Trajectory Generation for Noise-Constrained Autonomous Flight Operations

One of the major factors in acceptance of aircraft operating in urban areas is noise. In this work, we build on a framework for trajectory generation in order to account for limits on acousticmetrics at one ormore observer locations. The spatial trajectories are generated using Bézier polynomials and satisfy dynamic, acoustic, and mission constraints. The trajectories also guarantee spatial or temporal separation between vehicles for multi-vehicle operations. A simulation example is provided that demonstrates the reduction in noise levels at a set of measurement locations.

Ackerman, Kasey A.↗
NASA NTRSDate not supplied

A Rapid Target-Search Technique for KBO Exploration Trajectories

A rapid, grid-based, target-search algorithm is presented to find candidate se-quences of small-body encounters for mission design. The algorithm is especially relevant for cases with large combinatorial spaces. In this paper, the al-gorithm is used to identify candidate flyby sequences of multiple Kuiper-Belt Ob-jects (KBOs). Before reaching the first KBO in the sequence, the trajectories in this paper first use gravity assists at one or more of the giant planets to pump-uptheir orbital energy—reducing launch C3. The target-search algorithm consists offour sequential steps: (1) parameter definition, (2) fine-tuned Lambert-based gridsearch of ballistic trajectories visiting one KBO, (3) rapid, ∆V-based proximitysearch for additional KBOs using the state transition matrices (STMs), and (4) tra-jectory optimization of the most promising KBO sequences using the EvolutionaryMission Trajectory Generator (EMTG). The paper also defines an empirical-basedprocess to characterize the maximum step size for the target arrival dates in theLambert grid search. Lastly, a candidate mission to two KBOs is presented. Theresults indicate that the ∆V computed from the STM propagations is not repre-sentative of the final ∆V computed in EMTG; however, it does serve as a useful‘reachability’ metric to identify nearby KBOs.

Miguel Benayas Penas↗
NASA NTRS1993

Cassini 1997 VVEJGA Trajectory Launch/Arrival Space Analysis

The baseline trajectory for the Cassini mission to Saturn is an Oct. 1997 VVEJGA (Venus-Venus-Earth-Jupiter-Gravity-Assist) trajectory. The current choice for an arrival date, June 25, 2004, provides a rare Phoebe flyby opportunity. The goal of this analysis is to determine the optimal feasible trajectory for any launch/arrival date combination.

Cassini↗
NASA NTRS2011

Trajectory design considerations for small-body touch-and-go

"Touch-and-Go," or TAG, is an approach to small-body surface interrogation missions in which the spacecraft descends to the surface, remains in contact for a short time, and then ascends without coming to rest. Appropriate trajectory design solutions to support TAG missions vary widely based on the spacecraft dynamics, small-body environment, spacecraft and ground systems capabilities, and mission objectives. This paper discusses various factors that are considered during the process of developing a TAG mission trajectory and presents a few case study examples to demonstrate how TAG trajectories may vary from mission to mission.

Cangahuala, Alberto↗
NASA NTRS2018

Poincare: A Multi-Body, Multi-System Trajectory Design Tool

Poincare is a modular trajectory design tool based on a catalog of three-body science orbits and a differential corrector to compute connecting transfer arcs between orbits in multibody systems. Poincare attempts to offer a unified approach, i.e.,an“all-in-one”integrated search within one interface and setup in MONTE (JPL’s signature astrodynamic computing platform.) The Science Orbit Design Tool facilitates rapid and well-informed decisions regarding the selection of periodic orbits for a particular mission and enables the simultaneous study of various orbit alternatives. The Reference Trajectory Design Tool allows the user to calculate optimal transfer paths from a departure orbit to a science orbit via dynamical systems structures (invariant manifolds and Poincare maps), resulting in an end-to-end reference trajectory.

Senent, Juan↗
NASA NTRS2018

Low-Thrust Trajectory Design via Direct Transcription Leveraging Structure from the Low-Thrust Restricted Problem

A primary challenge of low-thrust mission design is the development of an initial guess for the state and control history of a trajectory. To address this challenge, one technique assembles dynamical structures, such as periodic orbits and their associated manifolds, into discontinuous chains that are corrected to locally optimal transfer solutions via direct transcription. In this investigation, dynamical structures that leverage low-thrust in a multi-body regime are incorporated into the orbit chain approach to expand the options available for construction of an initial guess and to guide the direct transcription algorithm toward different categories of locally optimal solutions. The properties and structures of the low-thrust model which facilitate orbit chain construction are demonstrated in representative transfer scenarios. Direct transcription is applied to converge upon locally optimal transfer trajectories in both simplified and ephemeris models. Results indicate that low-thrust dynamical structures offer a promising new catalog of options for use in the orbit chain approach to designing optimal low-thrust trajectories.

Grebow, Daniel↗
NASA NTRSDate not supplied

Lunar Regolith Trajectories as a Result of Plume Surface Interactions

Lunar regolith is ejected from the impingement points of descent engine plumes. Such particles pose potential risks to surface operations, sites of scientific and historical interest, and orbiting spacecraft. Consequently, determining the resultant trajectories of these particles is necessary in order to estimate and mitigate risk. Here we present the ranges, impact latitudes, times of flight, and maximum altitudes for particles accelerated by a plume surface interaction at the lunar south pole. Using launch angles determined from observations and simulations, and for velocities <1:6 km/s, particles pose little risk. However, above 1:6 km/s the risks increase, and the results become highly sensitive to the initial angle. In addition, gravitational and non-gravitational processes will introduce perturbations to high-velocity trajectories resulting in a reduction in precision. Therefore, while local topography or artificial berms may mitigate trajectories with low initial angles, it remains important to place tight constraints on the potential launch angles of particles accelerated by plume surface interactions through simulations and experimentation. If these angles are indeed constrained to within a few degrees of the horizon, the risks posed by accelerated regolith particles at any velocity will be minimal.

Daniel Batcheldor↗
NASA NTRSDate not supplied

An Automated Refinement Process for Particle Trajectory Methods in GlennICE

Computational methods for ice accretion can simulate the impact of water drops and ice crystals on an aircraft surface in a Lagrangian reference frame or in the Eulerian reference frame. In the Eulerian reference frame, particles are considered a continuous fluid while in the Lagrangian frame individual particle trajectories are calculated. Methods that use the Eulerian reference frame are typically easier to develop as established modules used for continuum mechanics can be leveraged. The Eulerian systems can also be faster since the user does not have to simulate millions of particles in order to achieve good results. It is imperative therefore that a Lagrangian method optimize the release points of trajectories such that accurate solutions can be obtained while minimizing as much as possible the number of trajectories computed. This paper will present a methodology for this refinement process and demonstrate its effectiveness on sample three dimensional test cases.

William B Wright↗
NASA NTRSDate not supplied

An Automated Refinement Process for Particle Trajectory Methods in GlennICE

Computational methods for ice accretion can simulate the impact of water drops and ice crystals on an aircraft surface in a Lagrangian reference frame or in the Eulerian reference frame. In the Eulerian reference frame, particles are considered a continuous fluid while in the Lagrangian frame individual particle trajectories are calculated. Methods that use the Eulerian reference frame are typically easier to develop as established modules used for continuum mechanics can be leveraged. The Eulerian systems can also be faster since the user does not have to simulate millions of particles in order to achieve good results. It is imperative therefore that a Lagrangian method optimize the release points of trajectories such that accurate solutions can be obtained while minimizing as much as possible the number of trajectories computed. This paper will present a methodology for this refinement process and demonstrate its effectiveness on sample three dimensional test cases.

William Wright↗
NASA NTRSDate not supplied

Power Measurements to Excavate Lunar Soil Simulant GRC-3B Using Arc Backhoe Trajectories

Understanding, mitigating, and minimizing power and mass requirements are crucial to developing the next generation excavation technologies for lunar and planetary in-situ resource utilization (ISRU). Towards this end, electrical power to the Advanced Planetary Excavator (APEX) was measured while excavating granular lunar soil simulant GRC-3B. Using a 21.6-cm wide bucket having a 30° leading edge, arc-shaped backhoe trajectories were dug to depths of 5, 10, and 20 cm with rake angles of 10, 20, and 30 degrees. Maximum net power, net energy, net energy per mass excavated, rate of mass excavated, horizontal distance from soil entry to exit (at bucket tip), and the trajectory to bucket volume percentage are presented to inform the scientific community as trajectories and designs are planned for future missions. Using APEX’s capability to evaluate power and energy consumption of excavation tools and processes gives guidance to developing power requirements and efficient methods for lunar excavation.

Excavation↗