Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Laser-driven proton fast ignition of inertial fusion: concepts, issues and prospects

Fast ignition (FI) is a novel approach to inertial confinement fusion, which has the potential for higher energy gain at lower overall driver energy and cost. This paper is a brief review of basic FI concepts and issues, with a particular emphasis on FI with laser-generated proton beams. General requirements for the DT fuel and the ignitor (particle beam) as well as for the laser drivers are discussed. Key issues related to proton FI are considered and selected results of experimental and numerical studies are described. A progress in development of laser facilities for FI research and prospects for FI experiments are outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Avoidance of tearing mode locking with electro-magnetic torque introduced by feedback-based mode rotation control in DIII-D and RFX-mod

Disruptions caused by tearing modes (TMs) are considered to be one of the most critical roadblocks to achieving reliable, steady-state operation of tokamak fusion reactors. We have demonstrated a promising scheme to avoid mode locking by utilizing the electro-magnetic (EM) torque produced with 3D coils that are available in many tokamaks. In this scheme, the EM torque is delivered to the modes by a toroidal phase shift between the externally applied field and the excited TM fields, compensating for the mode momentum loss through the interaction with the resistive wall and uncorrected error fields. Fine control of torque balance is provided by a feedback scheme. We have explored this approach in two widely different devices and plasma conditions: DIII-D and RFX-mod operated in tokamak mode. In DIII-D, the plasma target was high β N in a non-circular divertor tokamak. We define β N as β N = β/(I p /aB t ) (%Tm/MA), where β, I p , a, B t are the total stored plasma pressure normalized by the magnetic pressure, plasma current, plasma minor radius and toroidal magnetic field at the plasma center, respectively. The RFX-mod plasma was ohmically-heated with ultra-low safety factor in a circular limiter discharge with active feedback coils outside the thick resistive shell. The DIII-D and RFX-mod experiments showed remarkable consistency with theoretical predictions of torque balance. The application to ignition-oriented devices such as the International Thermonuclear Experimental Reactor (ITER) would expand the horizon of its operational regime. Finally, the internal 3D coil set currently under consideration for edge localized mode suppression in ITER would be well suited for this purpose.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthetic Diagnostics Platform for Fusion Plasma and a Two-Dimensional Synthetic Electron Cyclotron Emission Imaging Code

Magnetic confinement fusion is one of the most promising approaches to achieve fusion energy. With the rapid increase of the computational power over the past decades, numerical simulation have become an important tool to study the fusion plasmas. Eventually, the numerical models will be used to predict the performance of future devices, such as the International Thermonuclear Experiment Reactor (ITER) or DEMO. However, the reliability of these models needs to be carefully validated against experiments before the results can be trusted. The validation between simulations and measurements is hard particularly because the quantities directly available from both sides are different. While the simulations have the information of the plasma quantities calculated explicitly, the measurements are usually in forms of diagnostic signals. The traditional way of making the comparison relies on the diagnosticians to interpret the measured signals as plasma quantities. The interpretation is in general very complicated and sometimes not even unique. In contrast, given the plasma quantities from the plasma simulations, we can unambiguously calculate the generation and propagation of the diagnostic signals. These calculations are called synthetic diagnostics, and they enable an alternate way to compare the simulation results with the measurements. In this dissertation, we present a platform for developing and applying synthetic diagnostic codes. Three diagnostics on the platform are introduced. The reflectometry and beam emission spectroscopy diagnostics measure the electron density, and the electron cyclotron emission diagnostic measures the electron temperature. The theoretical derivation and numerical implementation of a new two dimensional Electron cyclotron Emission Imaging code is discussed in detail. This new code has shown the potential to address many challenging aspects of the present ECE measurements, such as runaway electron effects, and detection of the cross phase between the electron temperature and density fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-vessel visible inspection system on KSTAR

To monitor the global formation of the initial plasma and damage to the internal structures of the vacuum vessel, an in-vessel visible inspection system has been installed and operated on the Korean superconducting tokamak advanced research (KSTAR) device. It consists of four inspection illuminators and two visible/H-alpha TV cameras. Each illuminator uses four 150 W metal-halide lamps with separate lamp controllers, and programmable progressive scan charge-coupled device cameras with 1004x1004 resolution at 48 frames/s and a resolution of 640x480 at 210 frames/s are used to capture images. In order to provide vessel inspection capability under any operation condition, the lamps and cameras are fully controlled from the main control room and protected by shutters from deposits during plasma operation. In this paper, we describe the design and operation results of the visible inspection system with the images of the KSTAR Ohmic discharges during the first plasma campaign.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Integrated Data Analysis for Fusion: A Bayesian Tutorial for Fusion Diagnosticians

Integrated Data Analysis (IDA) offers a unified way of combining information relevant to fusion experiments. Thereby, IDA meets with typical issues arising in fusion data analysis. In IDA, all information is consistently formulated as probability density functions quantifying uncertainties in the analysis within the Bayesian probability theory. For a single diagnostic, IDA allows the identification of faulty measurements and improvements in the setup. For a set of diagnostics, IDA gives joint error distributions allowing the comparison and integration of different diagnostics results. Validation of physics models can be performed by model comparison techniques. Typical data analysis applications benefit from IDA capabilities of nonlinear error propagation, the inclusion of systematic effects and the comparison of different physics models. Applications range from outlier detection, background discrimination, model assessment and design of diagnostics. In order to cope with next step fusion device requirements, appropriate techniques are explored for fast analysis applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Applications and Progress of Dust Injection to Fusion Energy

Three regimes of dust injection are proposed for different applications to fusion energy. In the 'low-speed' regime (<5 km/s), basic dust transport study, edge plasma diagnostics, edge-localized-mode (ELM) pacing in magnetic fusion devices can be realized by injecting dust of known properties into today's fusion experiments. ELM pacing, as an alternative to mini-pellet injection, is a promising scheme to prevent disruptions and type I ELM's that can cause catastrophic damage to fusion devices. Different schemes are available to inject dust. In the 'intermediate-speed' regime (10-200 km/s), possible applications of dust injection include fueling of the next-step fusion devices, core-diagnostics of the next-step fusion devices, and compression of plasma and solid targets to aid fusion energy production. Promising laboratory results of dust moving at 10-50 km/s do exist. Significant advance in this regime may be expected in the near term to achieve higher dust speeds. In the 'high-speed' regime (>500 km/s), dust injection can potentially be used to directly produce fusion energy through impact. Ideas on how to achieve these extremely high speeds are mostly on paper. No plan exists today to realize them in laboratory. Some experimental results, including electrostatic, electromagnetic, gas-dragged, plasma-dragged, and laser-ablation-based acceleration, are summarized and compared. Some features and limitations of the different acceleration methods will be discussed. A necessary component of all dust injectors is the dust dropper (also known as dust dispenser). A computer-controlled piezoelectric crystals has been developed to dropped dust in a systematic and reproducible manner. Particle fluxes ranges from a few tens of particles per second up to thousands of particles per second by this simple device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Microwave-Heated Bumpy Torus: A Concept for Fusion Energy

In the last 3 decades, giant steps in technology and simulations capability have been made for the benefit of all magnetic fusion concepts. This is especially true for virtually a one-of-a-kind device, a microwave-driven bumpy-torus magnetic-fusion-energy system. In the 1980s, the prototype experiment was technology limited, and it was judged based on unrealistic expectations from an incomplete understanding of the machine performance. For those experiments, the machine did not achieve the theoretical stability threshold to demonstrate good plasma confinement. This paper examines the premise that the experimental platform was underpowered, which prevented acceptance of its value for fusion. In this paper, the experimental plasma scaling data with power are reviewed. If, with the advancements of technology and simulations capability of the last 30 years, stable operation can be proven, a much improved device competitive with tokamak and stellarator performance may be possible. The advantages of this concept include steady-state operation, gentle shut down, modular construction for fabrication and maintenance, and the natural diversion of impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance Issues Related to Web Service Usage for Remote Data Access

Web services are starting to be widely used in applications for remotely accessing data. This is of special interest for research based on small and medium scale fusion devices, since scientists participating remotely to experiments are accessing large amounts of data over the Internet. Recent tests were conducted to see how the new network traffic, generated by the use of web services, can be integrated in the existing infrastructure and what would be the impact over existing applications, especially those used in a remote participation scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Concept of DT fuel cycle for a fusion neutron source

A concept of DT-fusion neutron source (FNS) with the neutron yield higher than 10{sup 18} neutrons per second is under design in Russia. Such a FNS is of interest for many applications: 1) basic and applied research (neutron scattering, etc); 2) testing the structural materials for fusion reactors; 3) control of sub-critical nuclear systems and 4) nuclear waste processing (including transmutation of minor actinides). This paper describes the fuel cycle concept of a compact fusion neutron source based on a small spherical tokamak (FNS-ST) with a MW range of DT fusion power and considers the key physics issues of this device. The major and minor radii are ∼0.5 and ∼0.3 m, magnetic field ∼1.5 T, heating power less than 15 MW and plasma current 1-2 MA. The system provides the fuel mixture with equal fractions of D and T (D:T = 1:1) for all FNS technology systems. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Perspectives of Use of Diagnostic Mirrors with Transparent Protection Layer in Burning Plasma Experiments

We evaluate using of metal mirrors over-coated with transparent protection layer for the in-vessel diagnostic systems in reactor-grade fusion devices. Ideally, these should satisfy the contradictory demands of high reflectivity and small rate degradation when being bombarded by CX atoms. The serious threat to the performance of diagnostic mirrors is surface contamination with carbon-based material eroded from carbon tiles. Via coupling the protective layer to a bulk mirror we can mitigate the deposit infiuence on the reflectance spectra. The regards are given to survivability in plasma environment of protected coated metallic mirrors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic and X-ray Diagnostics for Plasma Position Measurements in the Ignition Experiment Ignitor

The ignition experiment Ignitor will produce high performance plasma regimes with neutron fluxes at the first wall comparable to those expected in power generating reactors (10{sup 15} n/ cm{sup 2}/ s at the first wall). An appreciable degradation of the inorganic insulators surrounding the conductors is expected and the measurement of basic plasma parameters, such as plasma current and position, by electromagnetic diagnostics can become problematic. Thus an R and D program, aimed at the development of effective and affordable devices for electromagnetic diagnostics with higher damage threshold, is being carried out. Prototype diagnostic coils of different shapes have been manufactured, in collaboration with SALENTEC and Universita di Lecce. At the same time, an alternative plasma position control method is being explored, based on the diffraction and detection of the soft X-ray radiation emitted, mostly by Molybdenum impurities, near the top or bottom of the plasma column, where the distance of the plasma last closed magnetic surface from the wall is only few millimeters. The underlying principles and general layout of the new system is essentially an adaptation of a 2-dimensional curved crystal spectrometer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall

High-resolution active and passive kink mode studies are conducted in a tokamak with an adjustable ferromagnetic wall near the plasma surface. Ferritic tiles made from 5.6 mm thick Hiperco{sup ®} 50 alloy have been mounted on the plasma-facing side of half of the in-vessel movable wall segments in the High Beta Tokamak-Extended Pulse device [D. A. Maurer et al., Plasma Phys. Controlled Fusion 53, 074016 (2011)] in order to explore ferritic resistive wall mode stability. Low-activation ferritic steels are a candidate for structural components of a fusion reactor, and these experiments examine MHD stability of plasmas with nearby ferromagnetic material. Plasma-wall separation for alternating ferritic and non-ferritic wall segments is adjusted between discharges without opening the vacuum vessel. Amplification of applied resonant magnetic perturbations and plasma disruptivity are observed to increase when the ferromagnetic wall is close to plasma surface instead of the standard stainless steel wall. Rapidly rotating m/n=3/1 external kink modes have higher growth rates with the nearby ferritic wall. Feedback suppression of kinks is still as effective as before the installation of ferritic material in vessel, in spite of increased mode growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of particle pinch on the fusion performance and profile features of an international thermonuclear experimental reactor-like fusion reactor

The evolution of the plasma temperature and density in an international thermonuclear experimental reactor (ITER)-like fusion device has been studied by numerically solving the energy transport equation coupled with the particle transport equation. The effect of particle pinch, which depends on the magnetic curvature and the safety factor, has been taken into account. The plasma is primarily heated by the alpha particles which are produced by the deuterium-tritium fusion reactions. A semi-empirical method, which adopts the ITERH-98P(y,2) scaling law, has been used to evaluate the transport coefficients. The fusion performances (the fusion energy gain factor, Q) similar to the ITER inductive scenario and non-inductive scenario (with reversed magnetic shear) are obtained. It is shown that the particle pinch has significant effects on the fusion performance and profiles of a fusion reactor. When the volume-averaged density is fixed, particle pinch can lower the pedestal density by ∼30%, with the Q value and the central pressure almost unchanged. When the particle source or the pedestal density is fixed, the particle pinch can significantly enhance the Q value by 60%, with the central pressure also significantly raised.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of plasma bolometers using fiber-optic temperature sensors

Measurements of radiated power in magnetically confined plasmas are important for exhaust studies in present experiments and expected to be a critical diagnostic for future fusion reactors. Resistive bolometer sensors have long been utilized in tokamaks and helical devices but suffer from electromagnetic interference (EMI). Results are shown from initial testing of a new bolometer concept based on fiber-optic temperature sensor technology. A small, 80 μm diameter, 200 μm long silicon pillar attached to the end of a single mode fiber-optic cable acts as a Fabry–Pérot cavity when broadband light, λ{sub o} ∼ 1550 nm, is transmitted along the fiber. Changes in temperature alter the optical path length of the cavity primarily through the thermo-optic effect, resulting in a shift of fringes reflected from the pillar detected using an I-MON 512 OEM spectrometer. While initially designed for use in liquids, this sensor has ideal properties for use as a plasma bolometer: a time constant, in air, of ∼150 ms, strong absorption in the spectral range of plasma emission, immunity to local EMI, and the ability to measure changes in temperature remotely. Its compact design offers unique opportunities for integration into the vacuum environment in places unsuitable for a resistive bolometer. Using a variable focus 5 mW, 405 nm, modulating laser, the signal to noise ratio versus power density of various bolometer technologies are directly compared, estimating the noise equivalent power density (NEPD). Present tests show the fiber-optic bolometer to have NEPD of 5-10 W/m{sup 2} when compared to those of the resistive bolometer which can achieve <0.5 W/m{sup 2} in the laboratory, but this can degrade to 1-2 W/m{sup 2} or worse when installed on a tokamak. Concepts are discussed to improve the signal to noise ratio of this new fiber-optic bolometer by reducing the pillar height and adding thin metallic coatings, along with improving the spectral resolution of the interrogator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Implementation of the full viscoresistive magnetohydrodynamic equations in a nonlinear finite element code

Numerical simulations form an indispensable tool to understand the behavior of a hot plasma that is created inside a tokamak for providing nuclear fusion energy. Various aspects of tokamak plasmas have been successfully studied through the reduced magnetohydrodynamic (MHD) model. The need for more complete modeling through the full MHD equations is addressed here. Our computational method is presented along with measures against possible problems regarding pollution, stability, and regularity. The problem of ensuring continuity of solutions in the center of a polar grid is addressed in the context of a finite element discretization of the full MHD equations. A rigorous and generally applicable solution is proposed here. Useful analytical test cases are devised to verify the correct implementation of the momentum and induction equation, the hyperdiffusive terms, and the accuracy with which highly anisotropic diffusion can be simulated. A striking observation is that highly anisotropic diffusion can be treated with the same order of accuracy as isotropic diffusion, even on non-aligned grids, as long as these grids are generated with sufficient care. This property is shown to be associated with our use of a magnetic vector potential to describe the magnetic field. Several well-known instabilities are simulated to demonstrate the capabilities of the new method. The linear growth rate of an internal kink mode and a tearing mode are benchmarked against the results of a linear MHD code. The evolution of a tearing mode and the resulting magnetic islands are simulated well into the nonlinear regime. The results are compared with predictions from the reduced MHD model. Finally, a simulation of a ballooning mode illustrates the possibility to use our method as an ideal MHD method without the need to add any physical dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A practical globalization of one-shot optimization for optimal design of tokamak divertors

In past studies, nested optimization methods were successfully applied to design of the magnetic divertor configuration in nuclear fusion reactors. In this paper, so-called one-shot optimization methods are pursued. Due to convergence issues, a globalization strategy for the one-shot solver is sought. Whereas Griewank introduced a globalization strategy using a doubly augmented Lagrangian function that includes primal and adjoint residuals, its practical usability is limited by the necessity of second order derivatives and expensive line search iterations. In this paper, a practical alternative is offered that avoids these drawbacks by using a regular augmented Lagrangian merit function that penalizes only state residuals. Additionally, robust rank-two Hessian estimation is achieved by adaptation of Powell's damped BFGS update rule. The application of the novel one-shot approach to magnetic divertor design is considered in detail. For this purpose, the approach is adapted to be complementary with practical in parts adjoint sensitivities. Using the globalization strategy, stable convergence of the one-shot approach is achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in modeling and numerical simulation of negative hydrogen ion sources (invited)

Recent progress in numerical modeling of H{sup -} ion sources has been reviewed. The following two topics are mainly the focus: (1) the origin of the nonuniformity of H{sup -} production and H{sup -} beam in large H{sup -} sources and (2) extraction physics, especially the role of the 'weak' transverse magnetic field on H{sup -} extraction. The present understanding of the origin of H{sup -} beam nonuniformity is reviewed and discussed with the results by a series of Monte Carlo transport modeling of electrons, neutrals, and H{sup -} ions. Also, the physical mechanism of the large enhancement of H{sup -} extraction due to the weak transverse magnetic field is discussed with the particle in cell modeling. In addition, some new results on the effect of surface H{sup -} production on the electric potential structure near the extraction aperture are presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostics Challenges for Burning Plasma Experiments

Many challenges are encountered in the design of diagnostics for a burning plasma experiment commencing with the definition of the measurement requirements in a coherent way. The specific hostile environment of the burning plasma experiment gives rise to many phenomena that are new to the diagnostics design (radiation-induced effects, long pulses, high particle fluxes, strong relativistic effects, etc.). This presents an overview of the main diagnostics challenges and briefly outlines some of the solutions being developed to meet them.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗