Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

99.996 %{sup 12}C films isotopically enriched and deposited in situ

Ionizing natural abundance carbon dioxide gas, we extract and mass select the ions, depositing thin films isotopically enriched to 99.9961(4) %{sup 12}C as measured by secondary ion mass spectrometry (SIMS). In solid state quantum information, coherence times of nitrogen-vacancy (NV) centers in {sup 12}C enriched diamond exceeding milliseconds demonstrate the viability of NV centers as qubits, motivating improved isotopic enrichment. NV centers in diamond are particularly attractive qubit candidates due to the optical accessibility of the spin states. We present SIMS analysis and cross-sectional scanning electron microscopy of {sup 12}C enriched thin film samples grown with this method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly c-axis oriented growth of GaN film on sapphire (0001) by laser molecular beam epitaxy using HVPE grown GaN bulk target

Growth temperature dependant surface morphology and crystalline properties of the epitaxial GaN layers grown on pre-nitridated sapphire (0001) substrates by laser molecular beam epitaxy (LMBE) were investigated in the range of 500–750 °C. The grown GaN films were characterized using high resolution x-ray diffraction, atomic force microscopy (AFM), micro-Raman spectroscopy, and secondary ion mass spectroscopy (SIMS). The x-ray rocking curve full width at a half maximum (FWHM) value for (0002) reflection dramatically decreased from 1582 arc sec to 153 arc sec when the growth temperature was increased from 500 °C to 600 °C and the value further decreased with increase of growth temperature up to 720 °C. A highly c-axis oriented GaN epitaxial film was obtained at 720 °C with a (0002) plane rocking curve FWHM value as low as 102 arc sec. From AFM studies, it is observed that the GaN grain size also increased with increasing growth temperature and flat, large lateral grains of size 200-300 nm was obtained for the film grown at 720 °C. The micro-Raman spectroscopy studies also exhibited the high-quality wurtzite nature of GaN film grown on sapphire at 720 °C. The SIMS measurements revealed a non-traceable amount of background oxygen impurity in the grown GaN films. The results show that the growth temperature strongly influences the surface morphology and crystalline quality of the epitaxial GaN films on sapphire grown by LMBE.

36 MATERIALS SCIENCE↗

Self-assembly of compositionally modulated Ga{sub 1−x}Mn{sub x}As multilayers during molecular beam epitaxy

GaMnAs structures were grown on GaAs(100) substrates by molecular beam epitaxy employing different growth parameters. We studied manganese incorporation employing secondary ion mass spectrometry (SIMS). At a growth temperature of 300 °C, we observed a self-assembled modulation of the manganese concentration. SIMS depth profiles were analyzed employing a depth resolution function taking into account sputtering-induced broadening of the original distribution and segregation. We found a Mn segregation length along the growth direction of ∼4 nm. The presence of GaMnAs multilayers was corroborated by high-resolution x-ray diffraction. Spinodal decomposition is a possible mechanism for the spontaneous formation of the multilayer structure.

36 MATERIALS SCIENCE↗

Titanium in silicon: Lattice positions and electronic properties

Secondary ion mass spectroscopy (SIMS) and deep level transient spectroscopy measurements were carried out on Czochralski (Cz)- and float-zone-grown (FZ) Si crystals, which were implanted with Ti ions and annealed in the temperature range 600–900 °C. The electrical behavior of Ti atoms is found to be different in Cz- and FZ-Si annealed at 650 °C, although the Ti SIMS profiles are similar. It is argued that interstitial Ti atoms (Ti{sub i}) in FZ-Si crystals interact with implantation-induced vacancies and take a substitutional position (Ti{sub s}). No energy levels which can be assigned to Ti{sub s} have been detected in this work or in previous experimental literature. However, previous calculations suggest that Ti{sub s} is a deep acceptor in Si. We show from density functional calculations that by taking proper account of interactions within the d-shell of the Ti impurity the electronic structure of Ti{sub s} has no levels in the band gap. The calculations show that Ti{sub i} is more energetically favorable than Ti{sub s} and that Ti{sub i} binds more strongly to the silicon vacancy than interstitial oxygen does, explaining the observed differences between FZ- and Cz-irradiated materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence of radicals created by plasma in bacteria in water

Heavy water (D{sub 2}O) was introduced into a non-thermal plasma-jet (NTPJ) device to generate deuterium monoxide (OD) radicals at room temperature. Owing to the similar reactivity and low prevalence of deuterium in nature, OD radicals can be utilized to visualize the OH radical interactions with water and living cells. Escherichia coli in water were treated with OD radicals, and D atom incorporation into cells was visualized using time-of-flight SIMS and Nano-SIMS. The results show that D atoms from NTPJ reach the cytoplasm of E. coli in H{sub 2}O, indicating the usefulness of this OD-tracking method for the study of radical interactions with living cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive secondary ion mass spectrometry analysis of ZnO nanowalls: Correlation to photocatalytic responses

We report on the visible light induced photocatalytic responses of zinc oxide (ZnO) nanostructures in the form of nanowires and nanowalls grown on aluminum substrates. Morphological and microstructural characteristics of these nanostructures have been analyzed using scanning electron microscopy (SEM) and high resolution electron microscopy (HRTEM). The presence of surface-adsorbed H{sup +}, O{sub 2}{sup −}, and OH{sup −} species on ZnO nanostructures has been established through secondary ion mass spectrometry (SIMS). The relative change in substrate coverage under varying reaction time has also been evidenced through SIMS and is in agreement with SEM observation. Compared to nanowires, oxygen adsorption on ZnO surfaces and subsequent oxygen in-diffusion are found to be prominent for the nanowall-like structures and are seen to be highest for nanowalls grown in lower reaction time. In contrast to nanowires, nanowalls are found to exhibit higher photocatalytic activity and this can be attributed to higher adsorption of oxygen. The photocatalytic activity of the samples under visible light is originated from the native defect-states and the photocatalytic efficiency is largely influenced by the surface-adsorbants. Control of surface adsorption characteristics of the nanowalls upon tuning wall thicknesses can lead to the development of futuristic efficient photocatalytic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical activation and electron spin resonance measurements of arsenic implanted in silicon

The electrical activation of arsenic (As) implanted in Si is investigated with electron spin resonance (ESR), spreading resistance (SR), and secondary ion mass spectroscopy (SIMS). The As ions were implanted with a dose of 1 × 10{sup 12 }cm{sup −2} and subsequently annealed at various temperatures in the range of 500–1100 °C. The ESR measurements at 10 K show that the density of the As donor electrons for all the annealing temperatures is less than 10% of the As atom concentration measured by SIMS. The SR data indicate that the density of conduction band electrons is several times larger than that of the As donor electrons. These results strongly suggest that most of the As donor electrons are ESR inactive at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of implanted phosphorus on the diffusivity of boron and its applicability to silicon solar cells

Boron diffusivity reduction in extrinsically doped silicon was investigated in the context of a process combination consisting of BBr{sub 3} furnace diffusion and preceding Phosphorus ion implantation. The implantation of Phosphorus leads to a substantial blocking of Boron during the subsequent Boron diffusion. First, the influences of ion implantation induced point defects as well as the initial P doping on B diffusivity were studied independently. Here, it was found that not the defects created during ion implantation but the P doping itself results in the observed B diffusion retardation. The influence of the initial P concentration was investigated in more detail by varying the P implantation dose. A secondary ion mass spectrometry (SIMS) analysis of the BSG layer after the B diffusion revealed that the B diffusion retardation is not due to potential P content in the BSG layer but rather caused by the n-type doping of the crystalline silicon itself. Based on the observations the B diffusion retardation was classified into three groups: (i) no reduction of B diffusivity, (ii) reduced B diffusivity, and (iii) blocking of the B diffusion. The retardation of B diffusion can well be explained by the phosphorus doping level resulting in a Fermi level shift and pairing of B and P ions, both reducing the B diffusivity. Besides these main influences, there are probably additional transient phenomena responsible for the blocking of boron. Those might be an interstitial transport mechanism caused by P diffusion that reduces interstitial concentration at the surface or the silicon/BSG interface shift due to oxidation during the BBr{sub 3} diffusion process. Lifetime measurements revealed that the residual (non-blocked) B leads to an increased dark saturation current density in the P doped region. Nevertheless, electrical quality is on a high level and was further increased by reducing the B dose as well as by removing the first few nanometers of the silicon surface after the BBr{sub 3} diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of Wien filter for small ion gun of surface analysis

The gas cluster ion beam (GCIB) and liquid metal ion beam have been studied in the context of ion beam usage for analytical equipment in applications such as X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). In particular, small ion sources are used for the secondary ion generation and ion etching. To set the context to this study, the SIMS project has been launched to develop ion-gun based analytical equipment for the Korea Basic Science Institute. The objective of the first stage of the project is the generation of argon beams with a GCIB system [A. Kirkpatrick, Nucl. Instrum. Methods Phys. Res., Sect. B 206, 830–837 (2003)] that consists of a nozzle, skimmer, ionizer, acceleration tube, separation system, transport system, and target. The Wien filter directs the selected cluster beam to the target system by exploiting the velocity difference of the generated particles from GCIB. In this paper, we present the theoretical modeling and three-dimensional electromagnetic analysis of the Wien filter, which can separate Ar{sup +}{sub 2500} clusters from Ar{sup +}{sub 2400} to Ar{sup +}{sub 2600} clusters with a 1-mm collimator.

43 PARTICLE ACCELERATORS↗

Observation of two-photon photoemission from cesium telluride photocathodes excited by a near-infrared laser

We explore nonlinear photoemission in cesium telluride (Cs$_2$Te) photocathodes where an ultrashort ($\sim 100$ fs full width at half max) 800-nm infrared laser is used as the drive-laser in lieu of the typical $\sim 266$-nm ultraviolet laser. An important figure of merit for photocathodes, the quantum efficiency, we define here for nonlinear photoemission processes in order to compare with linear photoemission. The charge against drive-laser (infrared) energy is studied for different laser energy and intensity values and cross-compared with previously performed similar studies on copper [P. Musumeci et al., \emph{Phys. Rev. Lett.}, \textbf{104}, 084801 (2010)], a metallic photocathode. We particularly observe two-photon photoemission in Cs$_2$Te using the infrared laser in contrast to the anticipated three-photon process as observed for metallic photocathodes.

43 PARTICLE ACCELERATORS↗

Critical Interface: Poly-Silicon to Tunneling SiO2 for Passivated Contact Performance

Environmental exposure of our thin tunneling SiO2 layer on nCz wafer samples prior to poly-Silicon (poly-Si) deposition critically impacts the resulting contact passivation. We present ToF-SIMS evidence of SiO2 oxide storage-induced degradation, presumably by surface contaminants such as carbon, in symmetric and device poly-Si/SiO2 lifetime samples as well as in finished cells. We also present methods to resurrect a contaminated SiO2 layer, including UV-O3 treatment prior to passivated contact formation to produce >21% TCO-free solar cells.

14 SOLAR ENERGY↗

Identification and characterization of deep nitrogen acceptors in β-Ga 2 O 3 using defect spectroscopies

The ability to achieve highly resistive beta-phase gallium oxide (β-Ga 2 O 3 ) layers and substrates is critical for β-Ga 2 O 3 high voltage and RF devices. To date, the most common approach involves doping with iron (Fe), which generates a moderately deep acceptor-like defect state located at E C -0.8 eV in the β-Ga 2 O 3 bandgap. Recently, there has been growing interest in alternative acceptors, such as magnesium (Mg) and nitrogen (N), due to their predicted deeper energy levels, which could avoid inadvertent charge modulation during device operation. In this work, a systematic study that makes direct correlations between the introduction of N using ion implantation and the observation of a newly observed deep level at E C -2.9 eV detected by deep-level optical spectroscopy (DLOS) is presented. The concentration of this state displayed a monotonic dependence with N concentration over a range of implant conditions, as confirmed by secondary ion mass spectrometry (SIMS). With a near 1:1 match in absolute N and E C -2.9 eV trap concentrations from SIMS and DLOS, respectively, which also matched the measured removal of free electrons from capacitance-voltage studies, this indicates that N contributes a very efficiently incorporated compensating defect. Density functional theory calculations confirm the assignment of this state to be an N (0/-1) acceptor with a configuration of N occupying the oxygen site III [N O(III) ]. The near ideal efficiency for this state to compensate free electrons and its location toward the midgap region of the β-Ga 2 O 3 bandgap demonstrates the potential of N doping as a promising approach for producing semi-insulating β-Ga 2 O 3 .

36 MATERIALS SCIENCE↗

Multi-microscopy characterization of threading dislocations in CVD-grown diamond films

We present site-coincident imaging of a high dislocation density boron-doped chemical vapor deposition-grown homoepitaxial (001) diamond film using electron channeling contrast imaging (ECCI), cathodoluminescence, transmission electron microscopy (TEM), and scanning secondary ion mass spectroscopy (SIMS). With growing interest in large area heteroepitaxial substrates, we show that ECCI is a promising technique to accurately evaluate dislocations in diamond films. We find the electron backscatter yield is sufficient to distinguish individual threading dislocations in ECCI despite the low atomic number of carbon, and we have generally good agreement between dislocations observed in ECCI and TEM of the same region. Importantly, relying on luminescence in the 430 nm dislocation-related A-band alone results in an underestimation of the defect density as we find only 20%–40% of the threading dislocations luminesce. Here, we further show that dislocations do not perturb the spatial uniformity of boron doping measured by SIMS, even when the dislocations are clustered with high density, and we can tentatively rule out strong segregation effects at the dislocations. Our results establish the complementary use of microscopy and microanalysis methods to rapidly characterize and understand the impact of dislocations in diamond thin films.

36 MATERIALS SCIENCE↗

Thermal annealing behavior of hydrogen and surface topography of H 2 + ion implanted tungsten

Tungsten (W) has been proposed as a plasma-facing material (PFM) in fusion reactors due to its outstanding properties. Degradation of the material properties is expected to occur as a result of hydrogen (H) isotope permeation and trapping in W. In this study, two polycrystalline W plates were implanted with 80 keV H 2 + ions to a fluence of 2E21 H+/m2 at room temperature (RT). Time-of-flight secondary ion mass spectrometry (ToF-SIMS), focused ion beam (FIB) and scanning electron microscopy (SEM) were used for sample characterization. The SIMS data shows that H atoms are distributed well beyond the ion projected range. Isochronal annealing appears to suggest two H release stages that might be associated with the reported activation energies. H release at RT was observed between days 10 and 70 following ion implantation, and the level was maintained over the next 60 days. In addition, FIB/SEM results exhibit H2 blister formation near the surface of the as-implanted W. The blister distribution remains unchanged after thermal annealing up to 600 °C.

H diffusion and release↗

Using Machine Learning Methods to Predict Bias in Nuclear Criticality Safety

The manuscript provides a description of the application of machine-learning (ML) tools to the prediction of bias in criticality safety analysis. In particular, a set of over 1000 experiments included in the Whisper package were fed into a variety of ML algorithms (notably Random Forest and AdaBoost) implemented in SciKit-Learn using k-eigenvalue sensitivities (with and without energy dependence) for individual nuclides, and optionally, the simulated k eff as the training features. Ultimately, the ML model was used to predict the bias (k sim - k exp ). The results indicate that use of energy-integrated sensitivity profiles with k sim as training features led to the best predictions as quantified by root-mean square and mean absolute errors. In particular, the best-case estimates came from AdaBoost, with a mean absolute error of 0.00174, which is less than the mean experimental uncertainty of 0.00328 for the experiments included.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A TRANSMISSION ELECTRON MICROSCOPY STUDY OF PRESOLAR HIBONITE

We report isotopic and microstructural data on five presolar hibonite grains (KH1, KH2, KH6, KH15, and KH21) identified in an acid residue of the Krymka LL3.1 ordinary chondrite. Isotopic measurements by secondary ion mass spectrometry (SIMS) verified a presolar circumstellar origin for the grains. Transmission electron microscopy (TEM) examination of the crystal structure and chemistry of the grains was enabled by in situ sectioning and lift-out with a focused-ion-beam scanning-electron microscope (FIB-SEM). Comparisons of isotopic compositions with models indicate that four of the five grains formed in low-mass stars that evolved through the red giant/asymptotic giant branches (RGBs/AGBs), whereas one grain formed in the ejecta of a Type II supernova. Selected-area electron-diffraction patterns show that all grains are single crystals of hibonite. Some grains contain minor structural perturbations (stacking faults) and small spreads in orientation that can be attributed to a combination of growth defects and mechanical processing by grain-grain collisions. The similar structure of the supernova grain to those from RGB/AGB stars indicates a similarity in the formation conditions. Radiation damage (e.g., point defects), if present, occurs below our detection limit. Of the five grains we studied, only one has the pure hibonite composition of CaAl{sub 12}O{sub 19}. All others contain minor amounts of Mg, Si, Ti, and Fe. The microstructural data are generally consistent with theoretical predictions, which constrain the circumstellar condensation temperature to a range of 1480-1743 K, assuming a corresponding total gas pressure between 1 x 10{sup -6} and 1 x 10{sup -3} atm. The TEM data were also used to develop a calibration for SIMS determination of Ti contents in oxide grains. Grains with extreme {sup 18}O depletions, indicating deep mixing has occurred in their parent AGB stars, are slightly Ti enriched compared with grains from stars without deep mixing, most likely reflecting differences in grain condensation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Sloan Digital Sky Survey COADD: 275 deg{sup 2} of deep Sloan Digital Sky Survey imaging on stripe 82

We present details of the construction and characterization of the coaddition of the Sloan Digital Sky Survey (SDSS) Stripe 82 ugriz imaging data. This survey consists of 275 deg{sup 2} of repeated scanning by the SDSS camera over –50° ≤ α ≤ 60° and –1.°25 ≤ δ ≤ +1.°25 centered on the Celestial Equator. Each piece of sky has ∼20 runs contributing and thus reaches ∼2 mag fainter than the SDSS single pass data, i.e., to r ∼ 23.5 for galaxies. We discuss the image processing of the coaddition, the modeling of the point-spread function (PSF), the calibration, and the production of standard SDSS catalogs. The data have an r-band median seeing of 1.''1 and are calibrated to ≤1%. Star color-color, number counts, and PSF size versus modeled size plots show that the modeling of the PSF is good enough for precision five-band photometry. Structure in the PSF model versus magnitude plot indicates minor PSF modeling errors, leading to misclassification of stars as galaxies, as verified using VVDS spectroscopy. There are a variety of uses for this wide-angle deep imaging data, including galactic structure, photometric redshift computation, cluster finding and cross wavelength measurements, weak lensing cluster mass calibrations, and cosmic shear measurements.

79 ASTRONOMY AND ASTROPHYSICS↗