Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Shock noise features using the SCIPVIS code

The numerical computational supersonic jet plume model SCIPVIS was analyzed in order to determine its effectiveness for predicting the complicated flow structure associated with supersonic shock containing jet plumes. The analysis focused on assessing the applicability of using this code for predicting the broadband shock noise radiation. The analysis was carried out for several exit Mach number cases (including 1.00, 1.41, and 1.99) covering both underexpanded and overexpanded flow conditions. The three primary turbulence closure models incorporated in the SCIPVIS code were utilized for comparisons to measured plume static pressure distributions. Among other results, the prediction of plume static pressures for all three nozzle exit Mach numbers was found to perform exceptionally well when compared with experimental data for both underexpanded and overexpanded cases. Computations performed using this code for calculating the average shock wavelength for the 1.99 exit Mach number case were shown to provide an excellent prediction of the peak frequency for broadband shock noise. The spatial variation of the turbulent kinetic energy was found to be in qualitative agreement with wedge hot-film measurements.

Seiner, J. M.↗
NASA NTRS2013

Comparison of Noise Source Localization Data with Flow Field Data Obtained in Cold Supersonic Jets and Implications Regarding Broadband Shock Noise

Phased array noise source localization have been compared with 2 types of flow field data (BOS and PIV). The data show that: 1) the higher frequency noise in a BBSN hump is generated further downstream than the lower frequency noise. This is due to a) the shock spacing decreasing and b) the turbulent structure size increasing with distance downstream. 2) BBSN can be created by very weak shocks. 3) BBSN is not created by the strong shocks just downstream of the nozzle because the turbulent structures have not grown large enough to match the shock spacing. 4) The point in the flow where the shock spacing equals the average size of the turbulent structures is a hot spot for shock noise. 5) Some of the shocks responsible for producing the first hump also produce the second hump.

Podboy, Gary↗
NASA NTRS1990

Properties of large scale plasma flow during the early stage of the plasmaspheric refilling

The objective is to better characterize the macroscopic properties of the interhemisphere plasma flow by solving a more complete set of hydrodynamic equations than that solved previously. Specifically, the ion continuity, momentum and energy equations were solved for the plasma flow along the closed magnetic field lines. During the initial stage of the supersonic outflow in the equatorial region, the ions cool substantially. Using the hydrodynamic model for the large-scale plasma flow, the dynamics of shocks was examined which form in the geomagnetic flux tubes during the early stages of refilling. These shocks are more like those forming in neutral gases than the electrostatic shocks driven by microinstabilities involving ion-ion interaction. Therefore, the shocks seen in the hydrodynamic model are termed as hydrodynamic shocks. Such shocks are generally unsteady and therefore the usual shock jump conditions given by Rankine-Hugoniot relations are not strictly applicable to them. The density, flow velocity and temperature structures associated with the shocks are examined for both asymmetrical and symmetrical flows. In the asymmetrical flow the outflow from one of two conjugate ionospheres is dominant. On the other hand, in the symmetrical case outflows from the two ionospheric sources are identical. Both cases are treated by a two-stream model. In the late type of flow, the early-time refilling shows a relaxation type of oscillation, which is driven by the large-scale interactions between the two identical streams. After this early stage, the resulting temperature structure shows some interesting features. In the equatorial region the streams are isothermal, but in the off-equatorial regions the streams have quite different temperatures, and also densities and flow velocities. The dense and slow stream is found to be warmer than the low-density fast stream. In the late stage of refilling, the temperature is found to steadily increase from the conjugate ionospheres towards the equator; the equatorial temperature is found to be as high as about 8000 K compared to the ionospheric temperature of 3600 K.

Singh, Nagendra↗
NASA NTRS1975

Shock-induced subsolidus reduction-decomposition of orthopyroxene and shock-induced melting in norite 78235

Lunar rock 78235 is a coarse-grained igneous rock which was chipped from the top of a boulder about 1/2 m in size at Station 8 at the base of the Sculptured Hills, Taurus-Littrow Valley. The rock is a shocked coarse-grained norite with a relict subophitic texture; it is composed of about equal proportions of chromian bronzite and anorthite. Evidence is presented for the shock history of the rock. It is concluded that 78235 is a deep-seated norite of cumulate origin which has been intensely shocked. Although it may be possible to account for the observed shock-induced features by invoking a single shock event, the evidence is best explained by a history which includes at least two discrete shock events. In the first identifiable shock event much of the plagioclase was transformed to maskelynite and the associated bronzite was deformed and acquired a mosaic structure. In a later shock event, localized melting of both plagioclase pyroxene occurred.

Sclar, C. B.↗
NASA NTRS1989

Shock-generated X-ray emission in radiatively driven winds - A model for Tau Scorpii

A one-dimensional radiation-hydrodynamics code is used to numerically investigate the structure and evolution of shocks in the winds of hot stars. Results are presented for the specific case of Tau Sco, a well-studied main-sequence B star for which there are X-ray data from the Einstien satellite's Solid State Spectrometer. A phenomenological radiative acceleration term and a mass-loss rate consistent with UV observations, are used to determine the time dependence of the temperatures within and X-ray emission from an isolated shock region. The driving acceleration leads to the formation of a two-component shock zone with 'forward' and 'reverse' shocks, each with their own characteristic temperature. A denser cold region forms between the two shocks, which could potentially account for the presence of narrow absorption features that are observed in the UV P Cygni profiles of many hot stars. The X-ray emission spectra from the shocks in the calculations are in good general agreement with two-temperature model fits to Einstein X-ray observations.

Macfarlane, Joseph J.↗
NASA NTRS1975

A shock spectra and impedance method to determine a bound for spacecraft structural loads

This paper proposes a method for the determination of design loads of a spacecraft mounted on a launch vehicle when the significant frequency ranges of the two structures overlap. The derived loads are realistic upper bounds of the flight loads. The method utilizes shock spectra of the spacecraft/launch vehicle interface directional accelerations for each event separately and introduces a reduction factor for the shock spectra which is based on the relative impedance of the spacecraft and launch vehicle. The main advantages of the method are low cost of analysis and timeliness in the design. These advantages are attained with only a slight expense of structural weight compared to the more exact transient analysis method.

Bamford, R.↗
NASA NTRS1999

Analysis of Unsteady Flow Phenomena: Shock - Vortex and Shock - Boundary Layer Interactions

The interaction of shock waves with vortices has received much attention in the past, mainly because shock-vortex interaction closely models the interaction of a shock wave with the coherent structures of a turbulent flow-field, and is a key feature in the broad-band shock noise for supersonic jets in off-project conditions. Chu and Kovasznay have shown that a weak disturbance in a viscous heat conducting fluid can be decomposed as the sum of three basic modes, namely acoustic, vortical and entropy mode; the interaction of any of these modes with a shock wave gives rise to all three disturbance modes downstream of the shock. The vortical mode is important since it constitutes the basis of the coherent structures that have been observed to dominate turbulence for low- to moderate-flow speed. Hollingsworth et al. have experimentally investigated the interaction of a cylindrical shock-induced starting vortex with a plane normal shock, and have shown that the interaction generates a cylindrical acoustic pulse that exhibits a quadrupolar structure consisting of four alternate compression and expansion regions centered around the transmitted vortex. The investigations of Hollingsworth and Richards have been extended by Dosanjh and Weeks that have analyzed the interaction of a columnar spiral vortex with a normal shock wave, thus obtaining quantitative measurements and confirming the generation of a progressive cylindrical wavefront of alternate compression-expansion nature. Naumann and Hermanns' have experimentally addressed the non-linear aspects of shock-vortex interaction, and have shown that the interaction causes both a diffraction and a reflection of the shock with a pattern consisting of either a regular-or a Mach-reflection depending on the shock and the vortex strengths. An attempt to theoretically explain the production of sound from the shock-vortex interaction was carried out by Ribner. Pao and Salas have numerically studied two-dimensional shock-vortex interactions.

Grasso, Francesco↗
NASA NTRS1977

Shatter cones - An outstanding problem in shock mechanics

Shatter cone characteristics are surveyed. Shatter cones, a form of rock fracture in impact structures, apparently form as a shock front interacts with inhomogeneities or discontinuities in the rock. Topics discussed include morphology, conditions of formation, shock pressure of formation, and theories of formation. It is thought that shatter cones are produced within a limited range of shock pressures extending from about 20 to perhaps 250 kbar. Apical angles range from less than 70 deg to over 120 deg. Tentative hypotheses concerning the physical process of shock coning are considered. The range in shock pressures which produce shatter cones might correspond to the range in which shock waves decompose into elastic and deformational fronts.

Milton, D. J.↗
NASA NTRS1985

Numerical simulation of transient inviscid gas flows in a shock tube

Time-dependent upwind high resolution schemes for solving the Euler equations were developed and applied to simulate 1-D and 2-D transient inviscid gas flows in a shock tube. Using obstacles of different geometries, a series of calculations were carried out to investigate the transient complex shock-wave diffraction phenomena. Shock-wave and objects interactions with shock Mach-number Ms ranging from 2 to 20 were considered. Comparison with analytical and available experimental results indicate good agreement. Display of detailed flow structures including multiple Mach shocks, slip surfaces, and vortex are also given.

Yang, J. Y.↗
NASA NTRS1979

Solar energetic particles - From the corona to the magnetotail

Some new results concerning coronal and interplanetary propagation of energetic particles are discussed in the context of previous and current observations and interpretations. Evidence is presented that the bulk of protons of approximately 1 MeV can be preferentially injected onto interplanetary field lines at coronal longitudes and latitudes well-removed (approximately 60 deg) from the site of the associated active region. For these protons, interplanetary propagation parallel and transverse to the interplanetary field evidently involves little scattering near 1 AU, so that parallel propagation is approximately 'scatter free' and transverse propagation is primarily that due to the E x B drift. Upstream of the earth's bow shock, both intensities and anisotropies of approximately 1-MeV protons and electrons are significantly modified by the magnetosphere, and these effects may provide a probe of the structure of the bow shock and magnetosheath in regions not readily accessible to spacecraft.

Roelof, E. C.↗
NASA NTRS2015

Late-Time Evolution of Composite Supernova Remnants: Deep Chandra Observations and Hydrodynamical Modeling of a Crushed Pulsar Wind Nebula in SNR G327.1-1.1

In an effort to better understand the evolution of composite supernova remnants (SNRs) and the eventual fate of relativistic particles injected by their pulsars, we present a multifaceted investigation of the interaction between a pulsar wind nebula (PWN) and its host SNR G327.1-1.1. Our 350 ks Chandra X-ray observations of SNR G327.1-1.1 reveal a highly complex morphology; a cometary structure resembling a bow shock, prong-like features extending into large arcs in the SNR interior, and thermal emission from the SNR shell. Spectral analysis of the non-thermal emission offers clues about the origin of the PWN structures, while enhanced abundances in the PWN region provide evidence for mixing of supernova ejecta with PWN material. The overall morphology and spectral properties of the SNR suggest that the PWN has undergone an asymmetric interaction with the SNR reverse shock(RS) that can occur as a result of a density gradient in the ambient medium and or a moving pulsar that displaces the PWN from the center of the remnant. We present hydrodynamical simulations of G327.1-1.1 that show that its morphology and evolution can be described by a approx. 17,000 yr old composite SNR that expanded into a density gradient with an orientation perpendicular to the pulsar's motion. We also show that the RSPWN interaction scenario can reproduce the broadband spectrum of the PWN from radio to gamma-ray wavelengths. The analysis and modeling presented in this work have important implications for our general understanding of the structure and evolution of composite SNRs.

Evolution↗
NASA NTRS1973

Statistics of bow shock nonuniformity.

The statistical occurrence of pulsation or oblique structure about the earth's generally nonuniform bow shock is estimated at selected points by combining a three-dimensional distribution of interplanetary field directions obtained for a six-day solar wind sector with an index of local pulsation geometry. The result, obtained with a pulsation index of 1.6, is a set of distribution patterns showing the dependence of the pulsation index on the field orientation at the selected shock loci for this value of the index.

Greenstadt, E. W.↗
NASA NTRS1992

Bow shocks and magnetotails of Venus and Mars - A comparison

Observations of the bow shock location and the structure of the magnetotail of Mars by the Phobos spacecraft and of Venus by the Pioneer Venus Orbiter reveal the solar wind interactions with these two planets to be quite similar. The subsolar bow shocks of both Venus and Mars lie at 1.47 planetary radii while at the terminator they are at 2.40 and 2.65 planetary radii, respectively. Both bow shocks have oval cross sections when viewed from the sun whose major axes are controlled by the orientation of the interplanetary magnetic field. The tail lobes of both planets are similarly controlled by the IMF orientation. The strength of the solar/antisolar component of the magnetic field is 17 nT at Venus and 14 nT at Mars. The component perpendicular to the tail axis is about 1/2 the corresponding IMF component at Venus and 2 times this component at Mars. However, when these measurements are compared in terms of the distance down the tail at which each were taken, the data from the two planets are quite consistent. Hence both Venus and Mars have principally induced magnetospheres and magnetotails which stand off the solar wind flow.

Russell, C. T.↗
NASA NTRS2023

Multi-Spacecraft Observations of Shocklets at an Interplanetary Shock

Interplanetary (IP) shocks are fundamental building blocks of the heliosphere, and the possibility to observe them in situ is crucial to address important aspects of energy conversion for a variety of astrophysical systems. Steepened waves known as shocklets are known to be important structures of planetary bow shocks, but they are very rarely observed related to IP shocks. We present here the first multi-spacecraft observations of shocklets observed by upstream of an unusually strong IP shock observed on 3 No v ember 2021 by several spacecraft at L1 and near-Earth solar wind. The same shock was detected also by radially aligned Solar Orbiter at 0.8 AU from the Sun, but no shocklets were identified from its data, introducing the possibility to study the environment in which shocklets developed. The Wind spacecraft has been used to characterize the shocklets, associated with pre-conditioning of the shock upstream by decelerating incoming plasma in the shock normal direction. Finally, using the Wind observations together with ACE and DSCOVR spacecraft at L1, as well as THEMIS B and THEMIS C in the near-Earth solar wind, the portion of interplanetary space filled with shocklets is addressed, and a lower limit for its extent is estimated to be of about 110 R E in the shock normal direction and 25 R E in the directions transverse to the shock normal. Using multiple spacecraft also reveals that for this strong IP shock, shocklets are observed for a large range of local obliquity estimates (9° –64°).

plasmas↗
NASA NTRS1993

Active control of nonlinear-nonstationary response and radiation of a panel-stringer structure near a supersonic jet

This paper is on the control of nonlinear-nonstationary vibration of an aircraft-type frame-stringer structure and the acoustic radiation resulting from high levels of excitation by a nearby supersonic model jet exhaust. The objective of the control is to reduce the acoustic fatigue and the interior noise in a high-speed aircraft. Control of the structural response is achieved by actively forcing the structure with an actuator at the shock oscillation frequency whose amplitude is locked into a self-control cycle. This controller follows the amplitude modulation that results from the rotation and counter-rotation of the jet column. Results show that the peak level of the power in the structural response due to shock impingement is reduced by a factor of 63, corresponding to a power level reduction of 18 dB. As a result, new broadband components emerge with at least four harmonics contributing to the broadening of the response spectrum. At accelerating and decelerating supersonic speeds, the exhaust from the jet induces higher transient loading on the nearby flexible structure due to the occurrence of multiple shocks from the jet.

Maestrello, Lucio↗
NASA NTRS1983

Plasma boundaries and shocks

Work conducted over the past four years on the plasma and magnetic field boundaries in the earth's magnetosphere and interplanetary space is reviewed. Studies of the structure and dynamics of bow shocks based largely on ISEE-1 and -2 measurments are discussed, together with intensive investigations of the particles and waves of the foreshock region, marked by various distributions of return ions reflected from the bow shock. Attention is briefly given to interplanetary shocks and the magnetosheath region, while research on the location, motion and structure and flux transfer events in the magnetopause and on the magnetospheric boundary layer is considered in detail. Evidence of reconnection in the magnetosphere is discussed, and studies of processes in the plasma sheet and neutral sheet in the magnetotail, the polar cusp and the injection of plasma into the inner magnetosphere are noted.

Russell, C. T.↗