Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SYSTEMS MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An Assessment of Nonhydrostatic and Hydrostatic Dynamical Cores at Seasonal Time Scales in the Energy Exascale Earth System Model (E3SM)

Abstract In global atmospheric modeling, the differences between nonhydrostatic (NH) and hydrostatic (H) dynamical cores are negligible in dry simulations when grid spacing is larger than 10 km. However, recent studies suggest that those differences can be significant at far coarser resolution when moisture is included. To better understand how NH and H differences manifest in global fields, we perform and analyze an ensemble of 28 and 13 km seasonal simulations with the NH and H dynamical cores in the Energy Exascale Earth System Model global atmosphere model, where the differences between H and NH configurations are minimized. A set of idealized rising bubble experiments is also conducted to further investigate the differences. Although NH and H differences are not significant in global statistics and zonal averages, significant differences in precipitation amount and patterns are observed in parts of the tropics. The most prominent differences emerge near India and the Western Pacific in the boreal summer, and the central‐southern Indian Ocean and Pacific in the boreal winter. Tropical differences influence surrounding regions through modification of the regional circulation and can propagate to the extratropics, leading to significant temperature and geopotential differences over the middle to high latitudes. While the dry bubble experiments show negligible deviation between H and NH dynamics until grid spacing is below 6.25 km, precipitation amount and vertical velocity are different in the moist case even at 25 km resolution.

58 GEOSCIENCES↗
DOE OSTI2022

Meteorological Influences on Anthropogenic PM 2.5 in Future Climates: Species Level Analysis in the Community Earth System Model v2

Abstract Biomass and fossil fuel burning impact air quality by injecting fine particulate matter (PM 2.5 ) and its precursors into the atmosphere, which poses serious threats to human health. However, the surface concentration of PM 2.5 depends not only on the magnitude of emissions, but also secondary production, transport, and removal. For example, in response to greenhouse gas driven warming, meteorological conditions that govern aerosol removal, primarily through rainfall and wet deposition, could shift in pattern, frequency, and intensity. This climate change driven process can impact air quality even without changes in aerosol emissions. In this experiment, we conduct new simulations by fixing aerosol emissions at present‐day levels in the Community Earth System Model Version 2, but increasing greenhouse gases through the 21st century. In our results, the changes in patterns and intensity of PM 2.5 are found to be associated with precipitation (via aerosol removal), temperature (via secondary organic aerosol (SOA) formation), and moisture and clouds (via sulfate production). A decrease in wet day frequency (∼1.2% global mean) contributes to increases in the surface concentrations of black carbon, primary organic matter, and sulfate in many regions. This is offset in some regions by an upward vertical shift in the level where SOA forms, which contributes to higher column burden but lower surface concentration. These results highlight a need, using a variety of modeling tools, to continually reassess aerosol emissions regulations in response to anticipated climate changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dynamical Study of Adsorbate-Induced Restructuring Kinetics in Bimetallic Catalysts Using the PdAu(111) Model System

The dynamic restructuring of bimetallic catalysts plays a crucial role in their catalytic activity and selectivity. In particular, catalyst pretreatment with species such as carbon monoxide and oxygen has been shown to be an effective strategy for tuning the surface composition and morphology. Mechanistic and kinetic understanding of such restructuring are fundamental to the chemistry and engineering of surface active sites but have remained challenging due to the large structural, chemical, and temporal degrees of freedom. Here, we combine time-resolved temperature-programmed infrared reflection absorption spectroscopy, ab initio thermodynamics, and machine-learning molecular dynamics to uncover previously unidentified timescale and kinetic parameters of in situ restructuring in Pd/Au(111), a highly relevant model system for dilute Pd-in-Au nanoparticle catalysts. The key innovation lies in utilizing CO not only as a chemically sensitive probe of surface Pd, but also as an agent that induces restructuring of the surface. Upon annealing in vacuum, as-deposited Pd islands became encapsulated by Au and partially dissolved into the subsurface, leaving behind isolated Pd monomers on the surface. Subsequent exposure to 0.1 mbar CO enabled Pd monomers to repopulate the surface up to 373 K, above which complete Pd dissolution occurred by 473 K, with apparent activation energies of 0.14 and 0.48 eV, respectively. Furthermore, these restructuring processes occurred over the span of ~1000 s at a given temperature. Such a minute-timescale dynamics not only elucidates the fluxional nature of alloy catalysts but also presents an opportunity to fine-tune the surface at moderate temperature and pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Represent precipitation-induced geological hazards in Earth system models using artificial intelligence

Precipitation-induced geological hazards, such as debris flow, landslides, mudflow and rockfalls (hereafter referred to as landslides), pose serious threats to public safety in many areas through the world. As residential properties and infrastructure in the US have increasingly expanded into landslide-prone areas and the drivers of landslides (e.g., wildfires and hurricanes) are predicted to intensify under climate warming, losses and fatalities from landslides are likely to increase in the future. Although our understanding of geoenvironmental factors and mechanisms contributing to landslides has greatly improved, only moderate progress has been made in predicting landslides out of well-studied watersheds. Furthermore, explicitly representing various landslide-related processes in Earth system models (ESMs), from the buckling of local bearing elements in granular materials, to frictional sliding between grains, formation of microcracks in the soil matrix, rupture of capillary bridges, or breakage of plant roots3 is still very unlikely within the next decade, even with the help of exascale computers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Variability of fire emissions on interannual to multi-decadal timescales in two Earth System models

Connections between wildfires and modes of variability in climate are sought as a means for predicting fire activity on interannual to multi-decadal timescales. Several fire drivers, such as temperature and local drought index, have been shown to vary on these timescales, and analysis of tree-ring data suggests covariance between fires and climate oscillation indices in some regions. HBut, the shortness of the satellite record of global fire events limits investigations on larger spatial scales. Here we explore the interplay between climate variability and wildfire emissions with the preindustrial long control numerical experiments and historical ensembles of CESM1 and the NOAA/GFDL ESM2Mb. We find that interannual variability in fires is underpredicted in both Earth System models (ESMs) compared to present day fire emission inventories. Modeled fire emissions respond to the El Niño/southern oscillation (ENSO) and Pacific decadal oscillation (PDO) with increases in southeast Asia and boreal North America emissions, and decreases in southern North America and Sahel emissions, during the ENSO warm phase in both ESMs, and the PDO warm phase in CESM1. In addition, CESM1 produces decreases in boreal northern hemisphere fire emissions for the warm phase of the Atlantic Meridional Oscillation. Through analysis of the long control simulations, we show that the 20th century trends in both ESMs are statistically significant, meaning that the signal of anthropogenic activity on fire emissions over this time period is detectable above the annual to decadal timescale noise. However, the trends simulated by the two ESMs are of opposite sign (CESM1 decreasing, ESM2Mb increasing), highlighting the need for improved understanding, proxy observations, and modeling to resolve this discrepancy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Quantitative Characterization of a Desalination Membrane Model System by X-ray Photoelectron Spectroscopy

Aromatic polyamide films form the active layer in reverse osmosis desalination membranes. Despite widespread use of this technology, it suffers from low rejection rates for certain water contaminants and from membrane fouling. Through a better understanding of the fundamental surface chemical processes during reverse osmosis desalination, advances in membrane and material design are expected. The recent invention of a molecular layer-by-layer (mLbL) preparation technique yields films that are sufficiently smooth to warrant investigation with high-resolution microscopy and spectroscopy methods. In this study, we present high-resolution, quantitative X-ray photoelectron spectroscopy (XPS) data on the surface chemistry of ultrathin polyamide films that can serve as a model system for desalination membranes. We show that a quantitative analysis of the XPS spectra gives information about the functional groups of the film as well as other compounds present due to the synthesis under ambient conditions. Unpolymerized functional groups are identified and aid in understanding the degree of cross-linking. Investigation of polymers with synchrotron-based XPS requires taking beam-induced changes into account. We quantify X-ray beam damage and show that beam damage to the polyamide is limited, allowing long-term investigation of thin polyamide films. Characterizing mLbL-grown films via high-resolution XPS is the basis for a better understanding of the chemical interplay of polyamide surface functional groups with the major components of desalination systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Hubble Space Telescope electrical power system model

This paper describes one of the most comprehensive models ever developed for a spacecraft electrical power system (EPS). The model was developed for the Hubble Space Telescope (HST) to evaluate vehicle power system performance and to assist in scheduling maintenance and refurbishment missions by providing data needed to forecast EPS power and energy margins for the mission phases being planned. The EPS model requires a specific mission phase description as the input driver and uses a high granularity database to produce a multi-orbit power system performance report. The EPS model accurately predicts the power system response to various mission timelines over the entire operational life of the spacecraft.

Baggett, Randy↗
NASA NTRS1995

The Development and Use of a Flight Optimization System Model of a C-130E Transport Aircraft

The Systems Analysis Branch at NASA Langley Research Center conducts a variety of aircraft design and analyses studies. These studies include the prediction of characteristics of a particular conceptual design, analyses of designs that already exist, and assessments of the impact of technology on current and future aircraft. The FLight OPtimization System (FLOPS) is a tool used for aircraft systems analysis and design. A baseline input model of a Lockheed C-130E was generated for the Flight Optimization System. This FLOPS model can be used to conduct design-trade studies and technology impact assessments. The input model was generated using standard input data such as basic geometries and mission specifications. All of the other data needed to determine the airplane performance is computed internally by FLOPS. The model was then calibrated to reproduce the actual airplane performance from flight test data. This allows a systems analyzer to change a specific item of geometry or mission definition in the FLOPS input file and evaluate the resulting change in performance from the output file. The baseline model of the C-130E was used to analyze the effects of implementing upper wing surface blowing on the airplane. This involved removing the turboprop engines that were on the C-130E and replacing them with turbofan engines. An investigation of the improvements in airplane performance with the new engines could be conducted within the Flight Optimization System. Although a thorough analysis was not completed, the impact of this change on basic mission performance was investigated.

Desch, Jeremy D.↗
DOE OSTI2016

Evaluating the strength of the land$-$atmosphere moisture feedback in Earth system models using satellite observations

The relationship between terrestrial water storage (TWS) and atmospheric processes has important implications for predictability of climatic extremes and projection of future climate change. In places where moisture availability limits evapotranspiration (ET), variability in TWS has the potential to influence surface energy fluxes and atmospheric conditions. Where atmospheric conditions, in turn, influence moisture availability, a full feedback loop exists. Here we developed a novel approach for measuring the strength of both components of this feedback loop, i.e., the forcing of the atmosphere by variability in TWS and the response of TWS to atmospheric variability, using satellite observations of TWS, precipitation, solar radiation, and vapor pressure deficit during 2002–2014. Our approach defines metrics to quantify the relationship between TWS anomalies and climate globally on a seasonal to interannual timescale. Metrics derived from the satellite data were used to evaluate the strength of the feedback loop in 38 members of the Community Earth System Model (CESM) Large Ensemble (LENS) and in six models that contributed simulations to phase 5 of the Coupled Model Intercomparison Project (CMIP5). We found that both forcing and response limbs of the feedback loop in LENS were stronger than in the satellite observations in tropical and temperate regions. Feedbacks in the selected CMIP5 models were not as strong as those found in LENS, but were still generally stronger than those estimated from the satellite measurements. Consistent with previous studies conducted across different spatial and temporal scales, our analysis suggests that models may overestimate the strength of the feedbacks between the land surface and the atmosphere. Lastly, we describe several possible mechanisms that may contribute to this bias, and discuss pathways through which models may overestimate ET or overestimate the sensitivity of ET to TWS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Facilitating better and faster simulations of aerosol-cloud interactions in Earth system models

Focal Area(s): 1. Predictive modeling through the use of AI techniques and AI-derived model components; the use of AI and other tools to design a prediction system comprising a hierarchy of models. 2. Insight gleaned from complex data (both observed and simulated) using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge-guided AI. Science Challenge: One major challenge that Earth system models (ESMs) face in providing credible prediction of the Earth system and its water cycle characteristics (e.g., mean state, variability, and extreme events) is to accurately simulate aerosol-cloud interactions (ACI). The physical, chemical, and dynamical processes affecting ACI are extremely complex and they range from nanoscale to planetary scale. In each model development cycle, scientists spend significant efforts investigating model deficiencies and uncertainties associated with aerosols (e.g., emissions, chemical processes, aerosol microphysics, and transport) and clouds (e.g., macrophysics, microphysics, turbulence, and large-scale circulation) in order to develop improved treatments. However, despite decades of active research, ACI is still a major source of uncertainty in climate projections, even though great progress has been made. Specific scientific challenges include: (i) Parameterizations are developed based on limited data; (ii) The complexity of a parameterization required for accurate predictions is not understood; (iii) Incomplete and unknown physics leads to errors in the fully coupled Earth system; and (iv) Complex physics is computationally too expensive to employ in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

A Transparent Translation from Legacy System Model into Common Information Model

Advances in the smart grid are forcing utilities toward better monitoring, control, and analysis of distribution systems, and require extensive cyber-based, intelligent systems and applications to realize various functionalities. The ability of systems, or components within systems, to interact and exchange services or information with each other is the key to the success of smart grid technologies, and it requires efficient information exchanging and data sharing infrastructure. The Common Information Model (CIM) is a standard that allows different applications to exchange information about an electrical system, and it has become a widely accepted solution for information exchange among different platforms and applications. However, most existing legacy systems were developed using their own languages rather than CIM. Integrating such legacy systems is a challenge for utilities, and the appropriate use of the integrated legacy systems is even more intricate. Thus, this paper describes an approach and open-source tool developed to translate legacy system models into CIM format. The developed tool was tested for a commercial distribution management system and simulation results have proved its effectiveness.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2018

A Transparent Translation from Legacy System Model into Common Information Model: Preprint

Advance in smart grid is forcing utilities towards better monitoring, control and analysis of distribution systems, and requires extensive cyber-based intelligent systems and applications to realize various functionalities. The ability of systems, or components within systems, to interact and exchange services or information with each other is the key to the success of smart grid technologies, and it requires efficient information exchanging and data sharing infrastructure. The Common Information Model (CIM) is a standard that allows different applications to exchange information about an electrical system, and it has become a widely accepted solution for information exchange among different platforms and applications. However, most existing legacy systems are not developed using CIM, but using their own languages. Integrating such legacy systems is a challenge for utilities, and the appropriate utilization of the integrated legacy systems is even more intricate. Thus, this paper has developed an approach and open-source tool in order to translate legacy system models into CIM format. The developed tool is tested for a commercial distribution management system and simulation results have proved its effectiveness.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Bovine Rectoanal Junction In Vitro Organ Culture Model System to Study Shiga Toxin-Producing Escherichia coli Adherence

Studies evaluating the interactions between Shiga toxin-producing Escherichia coli O157:H7 (O157) and the bovine recto–anal junction (RAJ) have been limited to either in vitro analyses of bacteria, cells, or nucleic acids at the RAJ, providing limited information. Alternatively, expensive in vivo studies in animals have been conducted. Therefore, our objective was to develop a comprehensive in vitro organ culture system of the RAJ (RAJ-IVOC) that accurately represents all cell types present in the RAJ. This system would enable studies that yield results similar to those observed in vivo. Pieces of RAJ tissue, obtained from unrelated cattle necropsies, were assembled and subjected to various tests in order to determine the optimal conditions for assaying bacterial adherence in a viable IVOC. O157 strain EDL933 and E. coli K12 with known adherence differences were used to standardize the RAJ-IVOC adherence assay. Tissue integrity was assessed using cell viability, structural cell markers, and histopathology, while the adherence of bacteria was evaluated via microscopy and culture methods. DNA fingerprinting verified the recovered bacteria against the inoculum. When the RAJ-IVOC was assembled in Dulbecco’s Modified Eagle Medium, maintained at a temperature of 39 °C with 5% CO 2 and gentle shaking for a duration of 3–4 h, it successfully preserved tissue integrity and reproduced the expected adherence phenotype of the bacteria being tested. The RAJ-IVOC model system provides a convenient method to pre-screen multiple bacteria-RAJ interactions prior to in vivo experiments, thereby reducing animal usage.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Solar System Modeling at NREL

This workshop walked through a description and demonstration of solar modeling data and tools available from the US National Renewable Energy Laboratory (NREL). The topics included: The National Solar Radiation Database (NSRDB) - updates and ways to access this sub-hourly gridded resource data; PVWatts - recent updates to include the NSRDB - opening up much of North and South America for analysis; System Advisor Model (SAM) - SAM is now open source, includes PV + batteries, bifacial panels, and much more; REOpt Lite - an online tool for quick PV and battery sizing for commercial buildings; PV Component LCOE Calculator - Allows for module costing based on components; A detailed demonstration of the SAM model for modeling a PV system with a battery and some of the questions that can be answered.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1992

System model development for nuclear thermal propulsion

A critical enabling technology in the evolutionary development of nuclear thermal propulsion (NTP) is the ability to predict the system performance under a variety of operating conditions. This is crucial for mission analysis and for control subsystem testing as well as for the modeling of various failure modes. Performance must be accurately predicted during steady-state and transient operation, including startup, shutdown, and post operation cooling. The development and application of verified and validated system models has the potential to reduce the design, testing, and cost and time required for the technology to reach flight-ready status. Since Oct. 1991, the U.S. Department of Energy (DOE), Department of Defense (DOD), and NASA have initiated critical technology development efforts for NTP systems to be used on Space Exploration Initiative (SEI) missions to the Moon and Mars. This paper presents the strategy and progress of an interagency NASA/DOE/DOD team for NTP system modeling. It is the intent of the interagency team to develop several levels of computer programs to simulate various NTP systems. The first level will provide rapid, parameterized calculations of overall system performance. Succeeding computer programs will provide analysis of each component in sufficient detail to guide the design teams and experimental efforts. The computer programs will allow simulation of the entire system to allow prediction of the integrated performance. An interagency team was formed for this task to use the best capabilities available and to assure appropriate peer review.

Walton, James T.↗
NASA NTRS1977

Experimental and analytical dynamic flow characteristics of an axial-flow fan from an air cushion landing system model

An investigation was conducted to compare the steady-state and dynamic flow characteristics of an axial-flow fan which had been used previously as the air supply fan for some model air cushion landing system studies. Steady-state flow characteristics were determined in the standard manner by using differential orifice pressures for the flow regime from free flow to zero flow. In this same regime, a correlative technique was established so that fan inlet and outlet pressures could be used to measure dynamic flow as created by a rotating damper. Dynamic tests at damper frequencies up to 5 Hz showed very different flow characteristics when compared with steady-state flow, particularly with respect to peak pressures and the pressure-flow relationship at fan stall and unstall. A generalized, rational mathematical fan model was developed based on physical fan parameters and a steady-state flow characteristic. The model showed good correlation with experimental tests at damper frequencies up to 5 Hz.

Thompson, W. C.↗
NASA NTRS2009

A Multiscale Modeling System: Developments, Applications, and Critical Issues

The foremost challenge in parameterizing convective clouds and cloud systems in large-scale models are the many coupled dynamical and physical processes that interact over a wide range of scales, from microphysical scales to the synoptic and planetary scales. This makes the comprehension and representation of convective clouds and cloud systems one of the most complex scientific problems in Earth science. During the past decade, the Global Energy and Water Cycle Experiment (GEWEX) Cloud System Study (GCSS) has pioneered the use of single-column models (SCMs) and cloud-resolving models (CRMs) for the evaluation of the cloud and radiation parameterizations in general circulation models (GCMs; e.g., GEWEX Cloud System Science Team 1993). These activities have uncovered many systematic biases in the radiation, cloud and convection parameterizations of GCMs and have led to the development of new schemes (e.g., Zhang 2002; Pincus et al, 2003; Zhang and Wu 2003; Wu et al. 2003; Liang and Wu 2005; Wu and Liang 2005, and others). Comparisons between SCMs and CRMs using the same large-scale forcing derived from field campaigns have demonstrated that CRMs are superior to SCMs in the prediction of temperature and moisture tendencies (e.g., Das et al. 1999; Randall et al 2003b; Xie et al. 2005).

Tao, Wei-Kuo↗