Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACECRAFT MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Analytical investigations in aircraft and spacecraft trajectory optimization and optimal guidance

A collection of analytical studies is presented related to unconstrained and constrained aircraft (a/c) energy-state modeling and to spacecraft (s/c) motion under continuous thrust. With regard to a/c unconstrained energy-state modeling, the physical origin of the singular perturbation parameter that accounts for the observed 2-time-scale behavior of a/c during energy climbs is identified and explained. With regard to the constrained energy-state modeling, optimal control problems are studied involving active state-variable inequality constraints. Departing from the practical deficiencies of the control programs for such problems that result from the traditional formulations, a complete reformulation is proposed for these problems which, in contrast to the old formulation, will presumably lead to practically useful controllers that can track an inequality constraint boundary asymptotically, and even in the presence of 2-sided perturbations about it. Finally, with regard to s/c motion under continuous thrust, a thrust program is proposed for which the equations of 2-dimensional motion of a space vehicle in orbit, viewed as a point mass, afford an exact analytic solution. The thrust program arises under the assumption of tangential thrust from the costate system corresponding to minimum-fuel, power-limited, coplanar transfers between two arbitrary conics. The thrust program can be used not only with power-limited propulsion systems, but also with any propulsion system capable of generating continuous thrust of controllable magnitude, and, for propulsion types and classes of transfers for which it is sufficiently optimal the results of this report suggest a method of maneuvering during planetocentric or heliocentric orbital operations, requiring a minimum amount of computation; thus uniquely suitable for real-time feedback guidance implementations.

Markopoulos, Nikos↗

Dynamic Model Investigation of a 1/20 Scale Gemini Spacecraft in the Langley Spin Tunnel

The investigation was conducted in the Langley spin tunnel. The tunnel is an atmospheric wind tunnel with a vertically rising airstream in the test section and a maximum airspeed of approximately 90 feet per second. For this investigation, the model was hand launched into the vertically rising airstream. At times the model, both with and without a drogue parachute, was launched gently with as little disturbance as possible to determine what motions of the spacecraft were self-excited. At other times, the spacecraft with pre-deployed drogue parachute was launched into various spinning motions to determine the effectiveness of the drogue parachute in terminating these spinning motions. During drogue-parachute deployment tests, the spacecraft was launched into various spinning and tumbling motions and the drogue parachute was deployed. The motions of the model were photographed with a motion-picture camera, and some of the film records were read to obtain typical time histories of the model motion. The angles of attack indicated in the time histories presented are believed to be accurate within +/-1 degree. The mass and dimensional characteristics of the dynamic model are believed to be measured to an accuracy of: +/-1 percent for the weight, +/-1 percent for z(sub cg)/d, +/-15 percent for x (sub cg), and +/-5 percent for the moments of inertia. The towline and bridle-line lengths were simulated to an accuracy of +/-1 foot full scale.

Lee, Henry A.↗

The influence of spacecraft flexibility on system controllability and observability

Literal criteria are developed for the controllability and observability of general models of flexible spacecraft. Results are interpreted in special cases and in physical terms, permitting in some cases the identification of uncontrollable and unobservable states simply by examination of scalars composed of modal parameters and location matrices for sensors and actuators. A procedure is established for isolation of uncontrollable states, whereby sensor and actuator configuration assure that uncontrollable flexible mode states are also unobservable; in many applications such states can then be removed by coordinate truncation.

Ohkami, Y.↗

A multi-spacecraft study of the coronal and interplanetary transport of solar cosmic rays. I, II

The analysis and interpretation of the multiple-spacecraft observations of a collection of flare events in six energy bands between 3 and 60 MeV/nucleon are presented. The longitudinal and radial dependence of the times of maximum flux, the relative maximum fluxes, and the decay constants, are determined; and the propagation model is compared with a simplified single-spacecraft model. The analytical model developed accounts for the effects of diffusion, convection, adiabatic deceleration, and corotation. The intensity time profiles are calculated for hypothetical spacecraft spaced at 60-deg longitude intervals between -120 and 120 deg. It is concluded that the large value of k(IP) (greater than or equal to 6 x 10 to the 21st sq cm/s) indicates the nonnegligibility of focused diffusion in the interplanetary modeling of these events.

Mcguire, R. E.↗

Simple Statistical Model to Quantify Maximum Expected EMC in Spacecraft and Avionics Boxes

This study shows cumulative distribution function (CDF) comparisons of composite a fairing electromagnetic field data obtained by computational electromagnetic 3D full wave modeling and laboratory testing. Test and model data correlation is shown. In addition, this presentation shows application of the power balance and extention of this method to predict the variance and maximum exptected mean of the E-field data. This is valuable for large scale evaluations of transmission inside cavities.

Models↗

SEQ-GEN: A comprehensive multimission sequencing system

SEQ-GEN is a user-interactive computer program used to plan and generate a sequence of commands for spacecraft. Desired activities are specified by the user of SEQ-GEN; SEQ-GEN in turn expands these activities, deriving the spacecraft commands necessary to accomplish the desired activities. SEQ-GEN models the effects on the spacecraft of the commands, predicting the state as a function of time, flagging any conflicts and rule violations. These states, conflicts, and violations are viewable both graphically and textually at the user's request. SEQ-GEN also displays the entire sequence graphically, showing each requested activity as a bar on its graphical timeline. SEQ-GEN immediately revalidates the sequence, updating its models and calculations along with its displays based on these changes. Because it has the ability to recalculate spacecraft states immediately, the user is able to perform 'what-if' sessions easily. SEQ-GEN, a multimission tool, is adaptable to any flight project. A flight project writes its adaptation files containing project unique information including in its simplest form, only spacecraft commands. For more involved projects the adaptation files may also contain flight and mission rules, description of the spacecraft and ground models, and the definition of activities. SEQ-GEN operates at whatever level of detail the adaptation files imply. Simple adaptations are straight forward to do. There is, however, no limit to the complexity of activity definitions or of spacecraft models: both may involve unlimited logical decision points. Commands and activities may involve any number of parameters of a wide variety of data types, including integer, float, time, boolean, and character strings. SEQ-GEN will be used by the Mars Pathfinder, Cassini, and VIM (Voyager Interstellar Mission) project in an effort to speed up adaptation time and to keep sequence generation costs down. SEQ-GEN is hosted on UNIX workstations. It uses MOTIF and X for windowing, and was designed and coded in an object-oriented style in the language C++.

Salcedo, Jose↗

A modal model for SCOLE structural dynamics

Information on a modal model for the Spacecraft Control Laboratory (SCOLE) is given in viewgraph form. A partial differential equation model covering roll bending, pitch bending, torsion, shear forces, and bending moments is given.

Joshi, Suresh M.↗

Magnetospheric plasma modeling (0-100 keV)

Spacecraft surface charging, which is primarily a current balance phenomenon, is in general a function of the dominant currents to and from the vehicle's surface. Within the near-earth magnetosphere the dominant currents to the surface are the ambient space plasma fluxes between approximately 0 and 100 keV. A major effort to understand the near-earth environment was initiated when spacecraft charging became a major issue. The present paper has the objective to summarize the basic features of the models which have resulted from this effort. A description is given of four categories of models, based primarily on the degree of empirical and theoretical input. Types of quantitative models are discussed, taking into account definitions, statistical models, analytic models, static models, and time-dependent models. Engineering models are also considered, giving attention to baseline models and 'worst-case' models.

Garrett, H. B.↗

A thermal scale modeling study for Apollo and Apollo applications, volume 1

The program is reported for developing and demonstrating the capabilities of thermal scale modeling as a thermal design and verification tool for Apollo and Apollo Applications Projects. The work performed for thermal scale modeling of STB; cabin atmosphere/spacecraft cabin wall thermal interface; closed loop heat rejection radiator; and docked module/spacecraft thermal interface are discussed along with the test facility requirements for thermal scale model testing of AAP spacecraft. It is concluded that thermal scale modeling can be used as an effective thermal design and verification tool to provide data early in a spacecraft development program.

Shannon, R. L.↗

Prediction of spacecraft potentials at geosynchronous orbit

Two relatively straightforward techniques are outlined for determining spacecraft potentials in the limit of a 'thick sheath' surrounding the spacecraft. A statistical model of the various features of the geosynchronous environment based on ATS-5 and ATS-6 data and an analytic model capable of detailed simulation of the low energy geosynchronous environment are also discussed. The results from these two environmental models are then combined with the charging models in order to provide estimates of the relationships between the geomagnetic index and spacecraft potential. The results are compared with actual potential measurements from ATS-5 and ATS-6.

Garrett, H. B.↗

On-board emergent scheduling of autonomous spacecraft payload operations

This paper describes a behavioral competency level concerned with emergent scheduling of spacecraft payload operations. The level is part of a multi-level subsumption architecture model for autonomous spacecraft, and it functions as an action selection system for processing a spacecraft commands that can be considered as 'plans-as-communication'. Several versions of the selection mechanism are described, and their robustness is qualitatively compared.

Lindley, Craig A.↗

The Use of Pro/Engineer CAD Software and Fishbowl Tool Kit in Ray-tracing Analysis

This document is designed as a manual for a user who wants to operate the Pro/ENGINEER (ProE) Wildfire 3.0 with the NASA Space Radiation Program's (SRP) custom-designed Toolkit, called 'Fishbowl', for the ray tracing of complex spacecraft geometries given by a ProE CAD model. The analysis of spacecraft geometry through ray tracing is a vital part in the calculation of health risks from space radiation. Space radiation poses severe risks of cancer, degenerative diseases and acute radiation sickness during long-term exploration missions, and shielding optimization is an important component in the application of radiation risk models. Ray tracing is a technique in which 3-dimensional (3D) vehicle geometry can be represented as the input for the space radiation transport code and subsequent risk calculations. In ray tracing a certain number of rays (on the order of 1000) are used to calculate the equivalent thickness, say of aluminum, of the spacecraft geometry seen at a point of interest called the dose point. The rays originate at the dose point and terminate at a homogenously distributed set of points lying on a sphere that circumscribes the spacecraft and that has its center at the dose point. The distance a ray traverses in each material is converted to aluminum or other user-selected equivalent thickness. Then all equivalent thicknesses are summed up for each ray. Since each ray points to a direction, the aluminum equivalent of each ray represents the shielding that the geometry provides to the dose point from that particular direction. This manual will first list for the user the contact information for help in installing ProE and Fishbowl in addition to notes on the platform support and system requirements information. Second, the document will show the user how to use the software to ray trace a Pro/E-designed 3-D assembly and will serve later as a reference for troubleshooting. The user is assumed to have previous knowledge of ProE and CAD modeling.

Nounu, Hatem N.↗

Failure rate analysis of Goddard Space Flight Center spacecraft performance during orbital life

Space life performance data on 57 Goddard Space Flight Center spacecraft are analyzed from the standpoint of determining an appropriate reliability model and the associated reliability parameters. Data from published NASA reports, which cover the space performance of GSFC spacecraft launched in the 1960-1970 decade, form the basis of the analyses. The results of the analyses show that the time distribution of 449 malfunctions, of which 248 were classified as failures (not necessarily catastrophic), follow a reliability growth pattern that can be described with either the Duane model or a Weibull distribution. The advantages of both mathematical models are used in order to: identify space failure rates, observe chronological trends, and compare failure rates with those experienced during the prelaunch environmental tests of the flight model spacecraft.

Norris, H. P.↗

Vehicle/Atmosphere Interaction Glows: Far Ultraviolet, Visible, and Infrared

Spacecraft glow information has been gathered from a number of spacecraft including Atmospheric and Dynamic satellites, and Space Shuttles (numerous flights) with dedicated pallet flow observations on STS-39 (DOD) and STS-62 (NASA). In addition, a larger number of laboratory experiments with low energy oxygen beam studies have made important contributions to glow understanding. The following report provides information on three engineering models developed for spacecraft glow including the far ultraviolet to ultraviolet (1400-4000 A), and infrared (0.9-40 microns) spectral regions. The models include effects resulting from atmospheric density/altitude, spacecraft temperature, spacecraft material, and ram angle. Glow brightness would be predicted as a function of distance from surfaces for all wavelengths.

Swenson, G.↗

Development of an SE(3)-based Rigid Body Pose Estimation Scheme for Unknown Moments of Inertia in a Spacecraft

In real-world applications, the consideration of state and parameter uncertainties is an important part of any navigation and control system. Uncertainties can arise because of the instruments, communication systems, or external disturbances. Parameter uncertainty can be due to uncertainties in the data or the calibration process used. The objective of this research is to develop a rigid body pose estimation scheme on nonlinear manifolds of rigid body motion groups for unknown mass properties moments of inertia with application in space launch. An unscented Kalman filter is developed on special Euclidean space and their tangent bundle to address uncertainties in the states and inertia properties. This estimator accounts for uncertainties, while considering rotational-translational coupling, and avoids singularity or non-uniqueness issues. Since this estimator is based on the nonlinear manifolds on which rigid body motion evolves, it is reliable and is expected to result in high level of accuracy. The estimators are validated on a generic model of Logistic Module (LM) and a cuboid spacecraft model. The algorithms can then be tested on Dragon XL, HTV-X, and possibly other spacecraft.

Moments of Inertia↗