Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHELL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Compton scattering of an X-ray photon by an open-shell atom

A nonrelativistic quantum theory for the nonresonant Compton scattering of an X-ray photon by a free many-electron atom with an open shell in the ground state has been constructed in the single-configuration Hartree-Fock approximation outside the impulse approximation widely used in the literature. The transition to an atom with closed shells reproduces the results obtained previously in [6, 7]. The results of a test calculation for atoms with open (Ti, Fe) and closed (Zn) 3d core shells are presented. The effects of the radial relaxation of one-electron states in the field of core vacancies have been taken into account. The results of the calculation agree well with the experimental results [15, 16]. It has been established that the results of the impulse approximation in the investigated X-ray photon energy ranges disagree with those of our theory not only quantitatively but also qualitatively. In particular, the impulse approximation near the elastic (Thomson and Rayleigh) scattering line leads to a gross overestimation of the contributions from the deep atomic shells involved in the inelastic photon scattering only virtually to the scattering probability. The presented theory is general in character and its applicability to a particular element of the Mendeleev table with an open core shell or to a many-electron atomic ion is limited only by the requirement that the nonrelativistic Hartree-Fock approximation be properly used in describing the scattering-state wave functions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Predicting the Optical Properties of Matrix Composites Containing Spherical Inclusions with Metal Shells

Individual small particles consisting of an insulating core and a metal shell exhibit more intricate behavior when exposed to electromagnetic radiation than continuous metal particles. A composite medium containing a large number of such particles is therefore bound to have new optical properties. If the inclusions are small relative to the wavelength of electromagnetic radiation, the optical characteristics of an inhomogeneous medium can be estimated from its effective permittivity. On the basis of the generalized effective field approximation, a formula is derived to calculate the effective dielectric characteristics of a matrix composite containing spherical inclusions with shells. The formula can be considered a generalization of the classical Maxwell–Garnett formula for a matrix medium with inhomogeneous inclusions consisting of anisotropic cores and isotropic shells. Using the formula, the frequency dependences of the real and imaginary parts of the effective permittivity in the 0.282–0.855 μm range of wavelengths are calculated for a composite consisting of an α-quartz matrix and spherical nanoinclusions with α-quartz cores and silver shells. The dependences are obtained for different relative volume fractions of cores in the inclusions and of inclusions in the composite. The frequency dependences of the refractive index, the extinction coefficient of the composite, and the transmittance and reflectance of a thin composite film are calculated for the range of wavelengths indicated above. It is shown that inclusions with metal shells in a matrix composite result in an additional plasmon resonance, compared to a composite containing all-metal inclusions. With a matrix composite, the additional plasmon resonance is observed at a wavelength of 0.33–0.34 μm in the ultraviolet range and is much less intense than the principal plasmon resonance. The additional plasmon resonance is responsible for the very low transmittance of a composite film in the ultraviolet region. At a constant volume fraction of inclusions in the composite, an increase in the volume fraction of the cores in them shifts the principal plasmon resonance to longer wavelengths and lowers its intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Jump-Off Velocity of an Impulsively Loaded Spherical Shell

We consider a constant temperature spherical shell of isotropic, homogeneous, linearly elastic material with density ρ and Lamé coefficients λ and μ. The inner and outer radii of the shell are r i and r o , respectively. We assume that the inside of the shell is a void. On the outside of the shell, we apply a uniform, time-varying pressure p(t). We also assume that the shell is initially at rest. We want to compute the jump-off time and velocity of the pressure wave, which are the first time after t = 0 at which the pressure wave from the outer surface reaches the inner surface. This analysis computes the jump-off velocity and time for both compressible and incompressible materials. This differs substantially from [3], where only incompressible materials are considered. We will consider the behavior of an impulsively loaded, exponentially decaying pressure wave p(t) = P 0 e -αt , where α ≥ 0. We notice that a constant pressure wave P(t) = P 0 is a special case (α = 0) of a decaying pressure wave. Both of these boundary conditions are considered in [3].

36 MATERIALS SCIENCE↗

Symmetry requirements for double shell capsules with aluminum ablators

Double shell targets present a promising avenue to obtain robust neutron yield on current laser facilities. The nature of the target, like current single shell designs, requires a symmetric implosion of an outer ablator to obtain a symmetric fuel volume that will lead to alpha heating and thermonuclear burn. Due to using aluminum as an ablator material and requiring different convergence than single shell symmetry studies at various energies are required. This paper moves forward from previous experiments conducted at 1MJ to show implosion symmetry at 1.25 and 1.5MJ. Symmetry in these experiments is sufficient to merit experiments using double shells to study the platform further. Additional studies are carried out on the outer shell symmetry impacts, showing that mitigating mode growth on the outer ablator is of great importance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SUPERNOVAE FROM DIRECT COLLISIONS OF WHITE DWARFS AND THE ROLE OF HELIUM SHELL IGNITION

Models for supernovae (SNe) arising from thermonuclear explosions of white dwarfs (WDs) have been studied extensively over the past few decades, mostly focusing on the single-degenerate (accretion of material by a WD) and double-degenerate (WD–WD merger) scenarios. In recent years it was suggested that direct WD–WD collisions provide an additional channel for such explosions. Here we extend the studies of such explosions and explore the role of helium shells in affecting the thermonuclear explosions. We study the impact of both low-mass (∼0.01 M {sub ⊙}) and high-mass (≥0.1 M {sub ⊙}) helium shells. We find that detonation of the massive helium layers precedes the detonation of the WD carbon–oxygen (CO) bulk during the collision and can change the evolution of the explosion and the outcomes for the cases of high-mass He shells. In particular, the He shell detonation propagates on the WD surface and inefficiently burns material prior to the CO detonation that later follows in the central parts of the WD. Such evolution leads to greater production of intermediate elements, producing larger yields of {sup 44}Ti and {sup 48}Cr relative to the pure CO–CO WD collisions. Collisions of WDs with a low-mass He shell do not give rise to helium detonation, but helium burning does precede the CO bulk detonation. Such collisions eject at high velocity a low mass of burned material enriched with intermediate elements and produce smaller changes in the overall explosion outcomes. The various effects arising from the contribution of low-/high-mass He layers change the kinematics and the morphological structure of collision-induced SNe and may thereby provide unique observational signatures for such SNe and play a role in the chemical enrichment of galaxies and the production of intermediate elements and positrons from their longer-term decay.

79 ASTRONOMY AND ASTROPHYSICS↗

Chromium Nucleosynthesis and Silicon–Carbon Shell Mergers in Massive Stars

In this work, we analyze the production of the element Cr in galactic chemical evolution (GCE) models using the NuGrid nucleosynthesis yields set. We show that the unusually large [Cr/Fe] abundance at [Fe/H] ≈ 0 reported by previous studies using those yields and predicted by our Milky Way model originates from the merging of convective Si-burning and C-burning shells in a 20 ${M}_{\odot }$ model at metallicity Z = 0.01, about an hour before the star explodes. This merger mixes the incomplete burning material in the Si shell, including 51 V and 52 Cr, out to the edge of the carbon/oxygen (CO) core. The adopted supernova model ejects the outer 2 ${M}_{\odot }$ of the CO core, which includes a significant fraction of the Cr-rich material. When including this 20 M⊙ model at Z = 0.01 in the yields interpolation scheme of our GCE model for stars between 15 and 25 ${M}_{\odot }$, we overestimate [Cr/Fe] by an order of magnitude at [Fe/H] ≈ 0 relative to observations in the Galactic disk. This raises a number of questions regarding the occurrence of Si–C shell mergers in nature, the accuracy of different simulation approaches, and the impact of such mergers on the presupernova structure and explosion dynamics. According to the conditions in this 1D stellar model, the substantial penetration of C-shell material into the Si shell could launch a convective–reactive global oscillation if a merger does take place. In any case, GCE provides stringent constraints on the outcome of this stellar evolution phase.

79 ASTRONOMY AND ASTROPHYSICS↗

Multidimensional Parameter Study of Double Detonation Type Ia Supernovae Originating from Thin Helium Shell White Dwarfs

Despite the importance of Type Ia supernovae (SNe Ia) throughout astronomy, the precise progenitor systems and explosion mechanisms that drive SNe Ia are still unknown. An explosion scenario that has gained traction recently is double detonation, in which an accreted shell of He detonates and triggers a secondary detonation in the underlying white dwarf. Our research presents a number of high-resolution, multidimensional, full-star simulations of thin-He-shell, sub-Chandrasekhar-mass white dwarf progenitors that undergo a double detonation. This suite of thin-shell progenitors incorporates He shells that are thinner than those in previous multidimensional studies. We confirm the viability of the double detonation across a range of He-shell parameter space, as well as present bulk yields and ejecta profiles for each progenitor. The yields obtained are generally consistent with previous works and indicate the likelihood of producing observables that resemble SNe Ia. The dimensionality of our simulations allow us to examine features of the double detonation more closely, including the details of the off-center secondary ignition and asymmetric ejecta. We find considerable differences in the high-velocity extent of postdetonation products across different lines of sight. The data from this work will be used to generate predicted observables and may further support the viability of the double detonation scenario as an SN Ia channel, as well as show how the properties of the progenitor or viewing angle may influence trends in observable characteristics.

79 ASTRONOMY AND ASTROPHYSICS↗

Presupernova O–C Shell Mergers Could Produce More 44 Ti than the Explosion

The formation of 44 Ti in massive stars is thought to occur during explosive nucleosynthesis; however, recent studies have shown it can be produced during O–C shell mergers prior to core collapse. We investigate how mixing according to 3D macrophysics derived from hydrodynamic simulations impacts presupernova O–C shell merger nucleosynthesis and if it can dominate explosive supernova production of 44 Ti and other radioactive isotopes. We compare a range of observations and models of explosive 44 Ti yields to preexplosive multizone mixing–burning nucleosynthesis simulations of an O–C shell merger in a 15 M ⊙ Z = 0.02 stellar model with mixing conditions corresponding to different 3D hydrodynamic mixing scenarios. Radioactive species produced in the O shell have a multidex spread in preexplosive yield predictions across different 3D mixing scenarios of 1.54 and 2.14 dex on average, depending on mass cut. 44 Ti has the largest spread of 4.78 and 4.81 dex depending on mass cut. Further, we show that the preexplosive production of 44 Ti can be larger than the explosive production of models and can match observations. Our results also show that 3D mixing physics enhances 44 Ti in 1D models without modifying 56 Ni yields. We conclude that quantitative predictions of 44 Ti and other radioactive species more broadly require an understanding of the 3D hydrodynamic mixing conditions present during the O–C shell merger.

Issa, Joshua [University of Victoria, BC (Canada);↗

Experimental Observation of Thin-shell Instability in a Collisionless Plasma

We report on the experimental observation of the instability of a plasma shell, which formed during the expansion of a laser-ablated plasma into a rarefied ambient medium. By means of a proton radiography technique, the evolution of the instability is temporally and spatially resolved on a timescale much shorter than the hydrodynamic one. The density of the thin shell exceeds that of the surrounding plasma, which lets electrons diffuse outward. An ambipolar electric field grows on both sides of the thin shell that is antiparallel to the density gradient. Ripples in the thin shell result in a spatially varying balance between the thermal pressure force mediated by this field and the ram pressure force that is exerted on it by the inflowing plasma. This mismatch amplifies the ripples by the same mechanism that drives the hydrodynamic nonlinear thin-shell instability (NTSI). Our results thus constitute the first experimental verification that the NTSI can develop in colliding flows.

79 ASTRONOMY AND ASTROPHYSICS↗

Production of Heavy α -Elements and 44 Ti in Cas A: Comparison to Abundances from 1D Core-collapse Supernova Models and Evidence for Carbon–Oxygen Shell Mergers

The merger between the carbon (C) and oxygen (O) shells hours to days before the collapse of a massive star significantly changes its nucleosynthesis, which is reflected in the elemental ratios observed in supernova remnants (SNRs). We present a nucleosynthesis study of 44 Ti production in core-collapse supernovae (CCSNe), highlighting large silicon (Si), sulfur (S), calcium (Ca), and, most importantly, argon (Ar) to neon (Ne) ratios as diagnostics for carbon–oxygen (C–O) shell mergers. We compare yields from eight different sets of CCSNe models to observations of Cassiopeia A (Cas A), and show that C–O shell mergers are consistently the models that best match X-ray and infrared observations. These models produce high Ar/Ne ratios (≳0.1), due to 20 Ne depletion and production of 36 Ar and 38 Ar, while lower ratios are obtained from nonmerger cases. Based on the Ar/Ne diagnostic, we compare the range of expected 44 Ti produced by C–O shell mergers, which is up to ∼20%–30% of the overall 44 Ti, but expected to be located outside the reverse shock. Based on the sets of models considered, the photon flux expected from the 44 Ti synthesized in the C–O shell merger in Cas A is below the NuSTAR and COSI detection limits, compatible with current limits locating most of the 44 Ti interior to the reverse shock, but might be detectable from proposed missions like ASCENT. Finally, for the SNR of 1987A, a dominant C–O merger origin of the observed 44 Ti is unlikely based on the observed redshift in its 44 Ti line.

79 ASTRONOMY AND ASTROPHYSICS↗

Automated shell theory for rotating structures (ASTROS)

A computer program for analyzing axisymmetric shells with inertial forces caused by rotation about the shell axis is developed by revising the STARS II shell program. The basic capabilities of the STARS II shell program, such as the treatment of the branched shells, stiffened wall construction, and thermal gradients, are retained.

Foster, B. J.↗

Constituency and origins of cyclic growth layers in pelecypod shells, part 1

Growth layers occurring in shells of 98 species of pelecypods were examined microscopically in thin section and as natural and etched surfaces. Study began with shells of eleven species known from life history investigations to have annual cycles of growth. Internal microstructural features of the annual layers in these shells provided criteria for recognition of similar, apparently annual shell increments in eighty-six of eighty-seven other species. All of the specimens feature growth laminae, commonly on the order of 50 microns in thickness. The specimens from shallow marine environments show either a clustering of growth laminae related to the formation of concentric ridges or minor growth bands on the external shell surface. Based on observations of the number of growth laminae and clusters per annual-growth layer, it was hypothesised that the subannual increments may be related to daily and fortnightly (and in some cases monthly) cycles in the environment. Possible applications of the paleogrowth method in the fields of paleoecology and paleoclimatology are discussed.

Berry, W. B. N.↗

Stress concentration in a cylindrical shell containing a circular hole.

The state of stress in a cylindrical shell containing a circular cutout was determined for axial tension, torsion, and internal pressure loading. The solution was obtained for the shallow shell equations by a variational method. The results were expressed in terms of a nondimensional curvature parameter which was a function of shell radius, shell thickness, and hole radius. The function chosen for the solution was such that when the radius of the cylindrical shell approaches infinity, the flat-plate solution was obtained. The results are compared with solutions obtained by more rigorous analytical methods, and with some experimental results. For small values of the curvature parameter, the agreement is good. For higher values of the curvature parameter, the present solutions indicate a limiting value of stress concentration, which is in contrast to previous results.

Adams, N. J. I.↗

Buckling of unstiffened and ring stiffened cylindrical shells under axial compression.

Bifurcation stresses and initial postbuckling behavior of both unstiffened and outside ring stiffened circular cylindrical shells under axial compression are analyzed. The shells are assumed to have axisymmetric sinusoidal imperfections with arbitrary wavelengths and amplitudes. It is found that for large imperfection amplitudes and wavelengths both the unstiffened and the stiffened shells have extremely small bifurcation loads. The postbuckling analysis shows that for small imperfection amplitudes the bifurcations from the axisymmetric state are initially unstable and collapse is associated with the bifurcation points. However, for larger values of the imperfection amplitudes the bifurcations are stable. For unstiffened shells the transition from unstable to stable bifurcations can take place at very small values of the load. On the other hand, for stiffened shells it is found that bifurcations at load levels less than about 40% of the classical buckling load have stable initial postbuckling behavior.

Pedersen, P. T.↗

The finite element method in shell stability analysis.

A development of the finite element method for thin shell instability analysis is presented, covering three principal aspects: (1) representation of shell geometry, (2) representation of element behavior, and (3) algorithmic tools for solution of the large-order systems of nonlinear algebraic equations which characterize various phases of shell instability. Two shell elements are described, an arbitrary quadrilateral and a triangle, and numerical results are presented for two widely-employed comparison problems for linear (stable) analysis. Two shell problems which include instability effects are also solved.-

Gallagher, R. H.↗

Interactive design of large end rings on stiffened conical shells using composites

Design study methods and results for a composite reinforced base ring for the conical aeroshell structure of the planetary lander vehicle for Project Viking, an unmanned mission to Mars, are presented. The aeroshell is a ring and stringer-stiffened conical shell structure having a half angle of 70 degrees with a large base ring mounted at the outer edge of the cone and a large pay-load ring in the interior with many smaller rings spaced along the inside shell surface. The purpose of the structure is to develop the aerodynamic drag required to decelerate the lander in the Mars atmosphere to facilitiate a soft landing. The design of a shell structure of this complexity requires the use of the latest technology available in a large general-purpose shell buckling program. The large general-purpose non-linear shell buckling program (BOSOR 2) which was used for this purpose is described.

Davis, R. C.↗

Note on the electric splitting of drift shells

A nonrelativistic analysis is presented for the deviation of a particle from its dipole magnetic drift shell in the presence of an electric field. An alternative definition of weak shell splitting is introduced in which the corotation drift velocity need not be small with respect to the azimuthal magnetic drift velocity. Approximate explicit solutions are obtained for the asymmetry of drift shells in the strong shell splitting case, i.e., for the case where the cross-magnetosphere potential drop is not small compared to particle kinetic energy. Upper limits to drift shell asymmetry are obtained from considerations of the Alfven layer.

Kivelson, M. G.↗

Observations of the circumstellar gas shells around Betelgeuse and Antares

Results are presented on the direct observations of the circumstellar shell around alpha-Ori, along with new observations of the Ca II infrared triplet lines which provide lower limits for the Ca(+) shell radii for alpha-Ori and alpha-Sco (Antares). The 8542-A line in alpha-Ori does not show a circumstellar absorption core, and the shell radius limit is estimated to be at least 31 times stellar radius. A 108-mA circumstellar core is observed in the 8542-A line in Antares for which a shell radius equal to 4.0 times stellar radius is suggested. The discovery of circumstellar emission through resonance line scattering will provide valuable additional information on the physical conditions in the shell.

Bernat, A. P.↗