Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Emittance characterization of a hot-cavity laser ion source at Holifield Radioactive Ion Beam Facility

The first investigation of the transverse emittance of a hot-cavity laser ion source based on all-solid-state Ti:sapphire lasers is presented. The emittances of {sup 63}Cu ion beams generated by three-photon resonant ionization are measured and compared with that of the {sup 69}Ga and {sup 39}K ion beams resulting from surface ionization in the same ion source. A self-consistent unbiased elliptical exclusion method is adapted for noise reduction and emittance analysis. Typical values of the rms and 90% fractional emittances of the Cu ion beams at 20 keV energy are found to be about 2 and 8 {pi} mm mrad, respectively, for the ion currents of 2-40 nA investigated. The emittances of the laser-produced Cu ion beams are smaller than those of the surface-ionized Ga and K ion beams.

43 PARTICLE ACCELERATORS↗

Growth and Characterization of Cobalt Doped Titanium Dioxide Thin Films by Pulsed Laser Deposition

Highly oriented rutile and anatase TiO{sub 2}:Co films have been grown on sapphire and SrTiO{sub 3} substrates by pulsed laser deposition with Co concentrations of 3% and 12%. All films are transparent with optical gaps >3 eV and show ferromagnetic behavior where the moment per Co ranges from 0.27 mu{sub B} to 1.2 mu{sub B}. The resistivity shows activated behavior where the activation energy ranges from 67 meV to 79 meV. Our results are consistent with other reports on dilute ferromagnetic TiO{sub 2}:Co films prepared under similar growth conditions.

36 MATERIALS SCIENCE↗

Combinatorial investigation of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC

We have synthesized thin films of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC by combinatorial method on TiC (111) seed layers grown on c-axis sapphire (Al{sub 2}O{sub 3}) substrates at 900 deg. C using magnetron sputter. X-ray diffraction showed the films to be c-axis oriented and epitaxial, and films contained a minor secondary phase of (Ti,Nb)C, irrespective of stoichiometry. Most notably, Raman spectroscopy suggest a sizable increase in the elastic modulus in the Nb-rich region as compared to either of the end members.

36 MATERIALS SCIENCE↗

Calorimetric low temperature detectors for low-energetic heavy ions and their application in accelerator mass spectrometry

The energy-sensitive detection of heavy ions with calorimetric low temperature detectors was investigated in the energy range of E=0.1-1 MeV/amu, commonly used for accelerator mass spectrometry (AMS). The detectors used consist of sapphire absorbers and superconducting aluminum transition edge thermometers operated at T{approx}1.5 K. They were irradiated with various ion beams ({sup 13}C,{sup 197}Au,{sup 238}U) provided by the VERA tandem accelerator in Vienna, Austria. The relative energy resolution obtained was {Delta}E/E=(5-9)x10{sup -3}, even for the heaviest ions such as {sup 238}U. In addition, no evidence for a pulse height defect was observed. This performance allowed for the first time to apply a calorimetric low temperature detector in an AMS experiment. The aim was to precisely determine the isotope ratio of {sup 236}U/{sup 238}U for several samples of natural uranium, {sup 236}U being known as a sensitive monitor for neutron fluxes. Replacing a conventionally used detection system at VERA by the calorimetric detector enabled to substantially reduce background from neighboring isotopes and to increase the detection efficiency. Due to the high sensitivity achieved, a value of {sup 236}U/{sup 238}U=6.1x10{sup -12} could be obtained, representing the smallest {sup 236}U/{sup 238}U ratio measured at the time. In addition, we contributed to establishing an improved material standard of {sup 236}U/{sup 238}U, which can be used as a reference for future AMS measurements.

43 PARTICLE ACCELERATORS↗

Electron transport properties of antimony doped SnO{sub 2} single crystalline thin films grown by plasma-assisted molecular beam epitaxy

By antimony doping tin oxide, SnO{sub 2}:Sb (ATO), below 1.0% Sb concentration, controllable n-type doping was realized. Plasma-assisted molecular beam epitaxy has been used to grow high quality single crystalline epitaxial thin films of unintentionally doped (UID) and Sb-doped SnO{sub 2} on r-plane sapphire substrates. A UID thickness series showed an electron concentration of 7.9x10{sup 18} cm{sup -3} for a 26 nm film, which decreased to 2.7x10{sup 17} cm{sup -3} for a 1570 nm film, whereas the mobility increased from 15 to 103 cm{sup 2}/V s, respectively. This series illustrated the importance of a buffer layer to separate unintentional heterointerface effects from the effect of low Sb doping. Unambiguous bulk electron doping was established by keeping the Sb concentration constant but changing the Sb-doped layer thickness. A separate doping series correlated Sb concentration and bulk electron doping. Films containing between 9.8x10{sup 17} and 2.8x10{sup 20} Sb atoms/cm{sup 3} generated an electron concentration of 1.1x10{sup 18}-2.6x10{sup 20} cm{sup -3}. As the atomic Sb concentration increased, the mobility and resistivity decreased from 110 to 36 cm{sup 2}/V s and 5.1x10{sup -2} to 6.7x10{sup -4} OMEGA cm, respectively. The Sb concentration was determined by secondary ion mass spectrometry. X-ray diffraction and atomic force microscopy measurements showed no detrimental effects arising from the highest levels of Sb incorporation. Temperature dependent Hall measurements established a lower limit for the Sb electron activation energy of 13.2 meV and found that films with greater than 4.9x10{sup 19} electrons/cm{sup 3} were degenerately doped. Within experimental uncertainties, 100% donor efficiency was determined for Sb-doped SnO{sub 2} in the range studied.

36 MATERIALS SCIENCE↗

X-ray absorption spectroscopy study of the local structures of crystalline Zn-In-Sn oxide thin films

The local structure of a Zn, Sn codoped In 2 O 3 thin film grown on c-plane sapphire by pulsed-laser deposition was examined by polarization-dependent x-ray absorption spectroscopy. The bixbyite film structure is both out-of-plane and in-plane oriented, and the structural results show that both Zn and Sn dopants occupy In sites. The In-O bond length is comparable to that in powder In 2 O 3 . However, both Sn-O and Zn-O bonds have two distinct distances in the first shell. Some of the Zn dopants are undercoordinated and, accordingly, some isovalent Sn dopants are overcoordinated for charge balance. In addition, the results suggest that the aliovalent Sn dopants form Frank-Koestlin clusters, (2Sn In ∙ O i " ) x , which provide enough charge carriers to explain the Hall measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LINE-IMAGING ORVIS MEASUREMENTS OF INTERFEROMETRIC WINDOWS UNDER QUASI-ISENTROPIC COMPRESSION

A line-imaging optically recording velocity interferometer system (ORVIS) has been implemented on the Veloce pulsed power generator to enable measurement of spatially resolved velocity histories of materials under dynamic compression. Interferometric windows are regularly used to maintain the high-pressure state of shock and ramp (quasi-isentropic) loaded materials. Although imaging through a shock or fast ramp (<=10 ns) loaded window material has been reasonably successful, for slower ramp loading (approx440 ns) experiments, the elastic-plastic yielding of the window has an adverse effect on return light to the line-imaging ORVIS. The results of quasi-isentropic loading experiments with various interferometric windows such as LiF, PMMA, NaCl, quartz and sapphire are presented.

36 MATERIALS SCIENCE↗

High Rate Plasticity under Pressure using a Windowed Pressure-Shear Impact Experiment

An experimental technique has been developed to study the strength of materials under conditions of moderate pressures and high shear strain rates. The technique is similar to the traditional pressure-shear plate-impact experiments except that window interferometry is used to measure both the normal and transverse particle velocities at a sample-window interface. Experimental and simulation results on vanadium samples backed with a sapphire window show the utility of the technique to measure the flow strength under dynamic loading conditions. The results show that the strength of the vanadium is 600 MPa at a pressure of 4.5 GPa and a plastic strain of 1.7%.

36 MATERIALS SCIENCE↗

Optimal composition of europium gallium oxide thin films for device applications

Europium gallium oxide (Eu{sub x}Ga{sub 1-x}){sub 2}O{sub 3} thin films were deposited on sapphire substrates by pulsed laser deposition with varying Eu content from x=2.4 to 20 mol %. The optical and physical effects of high europium concentration on these thin films were studied using photoluminescence (PL) spectroscopy, x-ray diffraction (XRD), and Rutherford backscattering spectrometry. PL spectra demonstrate that emission due to the {sup 5}D{sub 0} to {sup 7}F{sub J} transitions in Eu{sup 3+} grows linearly with Eu content up to 10 mol %. Time-resolved PL indicates decay parameters remain similar for films with up to 10 mol % Eu. At 20 mol %, however, PL intensity decreases substantially and PL decay accelerates, indicative of parasitic energy transfer processes. XRD shows films to be polycrystalline and beta-phase for low Eu compositions. Increasing Eu content beyond 5 mol % does not continue to modify the film structure and thus, changes in PL spectra and decay cannot be attributed to structural changes in the host. These data indicate the optimal doping for optoelectronic devices based on (Eu{sub x}Ga{sub 1-x}){sub 2}O{sub 3} thin films is between 5 and 10 mol %.

36 MATERIALS SCIENCE↗

Chirped pulse shadowgraphy for single shot time resolved plasma expansion measurements

The dynamics of ultrashort laser plasmas demand single shot temporal measurements on fast time scales. We describe a method to record the plasma expansion on picosecond (ps) timescales continuously over hundreds of ps, in single shot. The method uses the chirp of a Ti:sapphire laser as a time-resolved optical diagnostic tool. Using this technique, the evolution of the plasma expansion had been recorded with ps time resolutions, by probing with a chirped laser pulse of 200 ps duration. A peak expansion velocity of 1.8x10{sup 7} cm/s is observed and its evolution in time is obtained for approx300 ps.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: New design of a cryogenic linear radio frequency multipole trap

A new design of a cryogenic linear 22-pole ion trap has been constructed and tested. It is essentially a copper housing to which opposite inner walls two electrode sets are attached via sapphire insulators. These stainless steel electrodes are electroformed in one piece to guarantee good heat conduction. Connected to an external coil, they form an LC-circuit of about 19 MHz resonance frequency. This circuit is excited with a rf power supply made of a commercial digital synthesizer followed by a 10 W amplifier. Buffer gas-cooled H{sub 2}D{sup +} ions have been stored in this trap at a nominal trap temperature of 14 K. Spectroscopy of the ions confirmed that the kinetic (Doppler) temperature is in reasonable agreement with this value.

43 PARTICLE ACCELERATORS↗

Determining time resolution of microchannel plate detectors for electron time-of-flight spectrometers

The temporal resolution of a 40 mm diameter chevron microchannel plate (MCP) detector followed by a constant fraction discriminator and a time-to-digital converter was determined by using the third order harmonic of 25 fs Ti:sapphire laser pulses. The resolution was found to deteriorate from 200 to 300 ps as the total voltage applied on the two MCPs increased from 1600 to 2000 V. This was likely due to a partial saturation of the MCP and/or the constant fraction discriminator working with signals beyond its optimum range of pulse width and shape.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron spin resonance of Zn{sub 1-x}Mg{sub x}O thin films grown by plasma-assisted molecular beam epitaxy

Zn{sub 1-x}Mg{sub x}O thin films with a Mg content x between 0 and 0.42 grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates were investigated by electron spin resonance at 5 K. Above band gap illumination induces a persistent resonance signal, which is attributed to free conduction band electrons. The g-factors of the Zn{sub 1-x}Mg{sub x}O epitaxial layers and their anisotropy were determined experimentally and an increase from g{sub ||}=1.957 for x=0 to g{sub ||}=1.970 for x=0.42 was found, accompanied by a decrease in anisotropy. A comparison with g-factors of the Al{sub x}Ga{sub 1-x}N system is also given.

36 MATERIALS SCIENCE↗

Benefits of homoepitaxy on the properties of nonpolar (Zn,Mg)O/ZnO quantum wells on a-plane ZnO substrates

We report on the properties of nonpolar (Zn,Mg)O/ZnO quantum wells (QW) homoepitaxially grown by molecular beam epitaxy on a-plane ZnO substrates. We demonstrate a drastic improvement of the structural properties. We compare the photoluminescence properties of nonpolar homoepitaxial QWs and nonpolar heteroepitaxial QWs grown on sapphire and show that the reduction in structural defects and the improvement of surface morphology are correlated with a strong enhancement of the photoluminescence properties: reduction in full width at half maximum, strong increase in the luminescence intensities and their thermal stability. The comparison convincingly demonstrates the interest of homoepitaxial nonpolar QWs for bright UV emission applications.

36 MATERIALS SCIENCE↗

Homobuffer thickness effect on the background electron carrier concentration of epitaxial ZnO thin films

Epitaxial ZnO thin films were grown on r-plane sapphire substrates using plasma-assisted molecular-beam epitaxy. ZnO homobuffer layers grown at a lower temperature were introduced to improve the crystallinity of the top ZnO thin films. Thicker homobuffer layers lead to better crystallinity of the subsequent epitaxial ZnO thin films due to the strain relaxation effect. Residual background electron carrier concentration in these undoped ZnO thin films first decreases, then increases as the buffer layer thickness increases from {approx}1 to 30 nm, with a minimum electron concentration of {approx}1x10{sup 17} cm{sup -3} occurring in ZnO homobuffer of {approx}5 nm. These results demonstrate that the optimized ZnO homobuffer thickness to achieve both good ZnO crystallinity and low residual electron concentration is determined by the relative electron carrier concentration ratios and mobility ratios between the buffer and epi-ZnO layers.

36 MATERIALS SCIENCE↗

High resolution, low h{nu} photoelectron spectroscopy with the use of a microwave excited rare gas lamp and ionic crystal filters

The need for not only bulk sensitive but also extremely high resolution photoelectron spectroscopy for studying detailed electronic structures of strongly correlated electron systems is growing rapidly. Moreover, easy access to such a capability in one's own laboratory is desirable. Demonstrated here is the performance of a microwave excited rare gas (Xe, Kr, and Ar) lamp combined with ionic crystal filters (sapphire, CaF{sub 2}, and LiF), which can supply three strong lines near the photon energy of hnyu h{nu}=8.4, 10.0, and 11.6 eV, with the h{nu} resolution of better than 600 {mu}eV for photoelectron spectroscopy. Its performance is demonstrated on some materials by means of both angle-integrated and angle-resolved measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dislocation reduction via selective-area growth of InN accompanied by lateral growth by rf-plasma-assisted molecular-beam epitaxy

We investigated the selective-area growth (SAG) of InN by rf-plasma-assisted molecular-beam epitaxy using molybdenum (Mo)-mask-patterned sapphire (0001) substrates, which resulted in the formation of regularly arranged N-polar InN microcrystals. Transmission electron microscopy observation confirmed that the laterally grown side areas were nearly dislocation-free, although many threading dislocations (10{sup 9}-10{sup 10} cm{sup -2}) were generated at the InN/sapphire interface and propagated into the center of the InN microcrystals along the crystal c-axis. The laterally grown InN microcrystals exhibited narrow near-IR emission spectra with a peak photon energy of 0.627 eV and a linewidth of 39 meV at room temperature.

36 MATERIALS SCIENCE↗