Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiative properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Assessed Using Satellite Data and Ground Based Sun/Sky Radiometers

The short aerosol lifetime and the variety of sources and atmospheric processes that affect the aerosol concentration and properties, generate a very heterogeneous aerosol field. Satellite data are needed to assess the daily global distribution of aerosol loading, properties and radiative forcing of climate. The Moderate Resolution Imaging Spectroradiometer (MODIS) instrument launched in July 1999 measures the aerosol properties and backscattered radiation in 7 spectral channels across the solar channel with spatial resolution of 500 m. Novel inversion techniques are used to derive the aerosol forcing at the top of the atmosphere in these 7 spectral bands with even higher accuracy than the derivation of the aerosol loading or microphysical properties. But satellites cannot sense the aerosol attenuation of radiation reaching the Earth surface. A network of 100 sun/sky radiometers, members of the AErosol RObotic NEtwork (AERONET) is used to assess, simultaneously, the radiative forcing of aerosol at the surface level. The relevance of MODIS and AERONET to assess the global aerosol forcing, and the inversion techniques will be presented and discussed.

Kaufman, Yoram J.↗
NASA NTRS2010

Meeting Radiation Protection Requirements and Reducing Spacecraft Mass - A Multifunctional Materials Approach

Both crew and radio-sensitive systems, especially electronics must be protected from the effects of the space radiation environment. One method of mitigating this radiation exposure is to use passive-shielding materials. In previous vehicle designs such as the International Space Station (ISS), materials such as aluminum and polyethylene have been used as parasitic shielding to protect crew and electronics from exposure, but these designs add mass and decrease the amount of usable volume inside the vehicle. Thus, it is of interest to understand whether structural materials can also be designed to provide the radiation shielding capability needed for crew and electronics, while still providing weight savings and increased useable volume when compared against previous vehicle shielding designs. In this paper, we present calculations and analysis using the HZETRN (deterministic) and FLUKA (Monte Carlo) codes to investigate the radiation mitigation properties of these structural shielding materials, which includes graded-Z and composite materials. This work is also a follow-on to an earlier paper, that compared computational results for three radiation transport codes, HZETRN, HETC, and FLUKA, using the Feb. 1956 solar particle event (SPE) spectrum. In the following analysis, we consider the October 1989 Ground Level Enhanced (GLE) SPE as the input source term based on the Band function fitting method. Using HZETRN and FLUKA, parametric absorbed doses at the center of a hemispherical structure on the lunar surface are calculated for various thicknesses of graded-Z layups and an all-aluminum structure. HZETRN and FLUKA calculations are compared and are in reasonable (18% to 27%) agreement. Both codes are in agreement with respect to the predicted shielding material performance trends. The results from both HZETRN and FLUKA are analyzed and the radiation protection properties and potential weight savings of various materials and materials lay-ups are compared.

Atwell, William↗
NASA NTRS2003

Benchmark studies of the effectiveness of structural and internal materials as radiation shielding for the international space station

Accelerator-based measurements and model calculations have been used to study the heavy-ion radiation transport properties of materials in use on the International Space Station (ISS). Samples of the ISS aluminum outer hull were augmented with various configurations of internal wall material and polyethylene. The materials were bombarded with high-energy iron ions characteristic of a significant part of the galactic cosmic-ray (GCR) heavy-ion spectrum. Transmitted primary ions and charged fragments produced in nuclear collisions in the materials were measured near the beam axis, and a model was used to extrapolate from the data to lower beam energies and to a lighter ion. For the materials and ions studied, at incident particle energies from 1037 MeV/nucleon down to at least 600 MeV/nucleon, nuclear fragmentation reduces the average dose and dose equivalent per incident ion. At energies below 400 MeV/nucleon, the calculation predicts that as material is added, increased ionization energy loss produces increases in some dosimetric quantities. These limited results suggest that the addition of modest amounts of polyethylene or similar material to the interior of the ISS will reduce the dose to ISS crews from space radiation; however, the radiation transport properties of ISS materials should be evaluated with a realistic space radiation field. Copyright 2003 by Radiation Research Society.

NASA Discipline Radiation Health↗
DOE OSTI2024

MORPHOLOGICAL AND RADIATION DAMAGE INFORMED THERMAL PROPERTY PREDICTION IN SCALED GEOMETRIC DOMAINS

This proposed work has the potential to rewrite the way the nuclear industry investigates new fuel and nuclear material designs. The current rubric of nuclear material design has myriad steps in the process, and while certain physics are modeled accurately, each step must be connected in order to obtain an entire description of the process. At present, neutronic, thermal, microstructural, fission product chemistry and migration, and radiation defect analysis (hereafter referred to together as “combined analysis”) are performed, albeit separately. There is no existing method which combines these physics in an attempt to understand the natural interactions between these phenomena. Consequently, the timeline for design, fabrication, experiment, validation, and licensing can take years. A disruptive approach is required to accelerate the development of new technology. This proposed undertaking creates a validated computational framework, generating a new microscopic-to-macroscopic methodology yielding thermal property predictions for nuclear fuels and materials at an engineering spatial scale.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2014

TPSAS-NF1676L-19238-DND

The 24-hour cycle of solar insolation drives diurnal cycles in Earth system processes critical to climate: radiation, convection, turbulence, and cloud processes. Cloud properties, temperature, radiative fluxes, and precipitation exhibit robust diurnal cycles as a result. The presence of these robust diurnal cycles fundamentally changes the time mean and variability of the TOA energy budget. Therefore, there is a need to understand the diurnal cycle contributions to the TOA energy budget in both observations and climate models. The first objective of this study is to quantify the diurnal cycle impact on the time mean and variability of the TOA energy budget in observations defined as the difference between TOA fluxes computed with diurnally uniform and diurnally varying cloud properties. The required observational input is observed from the combined Terra+Aqua Cloud and Earth's Radiant Energy System (CERES) data products ranging from June 2002 through October 2012. The second objective of this study is to evaluate the impact of known errors in the model diurnal cycle simulation on the time mean and variability of the TOA energy budget. The results indicate that (1) the diurnal cycle impacts on the regional time mean Tropical longwave and shortwave fluxes range from 1-3 W m 2 and 5 25 W m 2, respectively; (2) the diurnal cycle contributions to TOA flux variability exceeds 50% in land convective regions (e.g., central South America and central Africa);(3) the diurnal cycle contributions to the TOA shortwave and longwave flux time mean and variability in the CanAM4 GCM are too small in land convective regions due to errors in the diurnal distribution of convective clouds grid box errors exceed 100%.

Patrick C Taylor↗
NASA NTRSDate not supplied

Examining the Feasibility of Detailed Decomposition of Radiative Flux Anomalies to Cloud Changes

This presentation will explore the degree to which radiative flux anomalies in the last two decades seen by CERES can be interpreted as the result of changes in particular cloud types. A study of this kind is potentially enabled by the new CERES FlxByCldTyp (FBCT) product which provides combined Terra and Aqua daytime 1°-regional gridded daily and monthly top-of-the-atmosphere radiative fluxes and associated MODIS-derived cloud properties stratified by Cloud Top Pressure (CTP) and Cloud Optical Thickness (TAU), i.e., arrays of cloud properties and radiative fluxes resolved in CTP-TAU bins. It has been shown (Sun et al. 2022) that the FBCT time series of global flux anomalies tracks closely its SSF1deg and EBAF counterparts, indicating that these three products provide fluxes of consistent stability for interannual variability studies. We are thus in position to examine whether CERES regional or global radiative fluxes anomalies and trends are driven by changes in certain elements of FBCT flux arrays corresponding to particular cloud types. Anomalies in flux array elements will in turn be investigated in terms of cloud property variations within the CTP-TAU bins where the biggest flux anomalies are encountered. We will essentially seek to obtain the relative contributions to the anomalies of binned all-sky fluxes of changes in cloud fraction within cloud types and of changes in their overcast fluxes modulated by other cloud properties. Such an analysis holds great promise of unveiling the root causes of cloud-driven changes in the planetary radiation budget of the last two decades.

cloud↗
NASA NTRSDate not supplied

Shock-Layer Radiation Insights Available Through Flowfield Property Binning

This paper introduces a method for assessing similarity between available shock-layer radiation measurements and the radiative heating to a vehicle of interest. This method will be referred to as the flowfield property binning (FPB) approach. The challenge in developing this approach is that radiometer measurements from a surface normal line of sight, observed radiation measurements of the entire shock-layer from a distance, or measured shock-tube nonequilibrium profiles are notably different geometrically than the radiative flux to a vehicle surface. Therefore, the relative contributions of various regions of the shock-layer to the measurement, and how these relative contributions compare with the radiative heating to a vehicle of interest, are unclear. By tracking the radiation contribution from each flowfield location, and then grouping this contribution based on two local flowfield properties, these geometric differences are removed. This provide a two dimensional group, or bin, distribution that represents the radiation environment in the same format for various types of radiation simulations, such as observed radiation or radiative flux to a vehicle surface. In the limits of optically-thin radiation transport and thermochemical equilibrium flow, the choice of pressure and temperature as the binning flowfield properties is shown to provide a bin distribution that uniquely defines the radiation simulation. This concept is found to be sufficient for establishing similarity between two cases even when the optically-thin radiation transport and thermochemical equilibrium assumptions are not satisfied. A simple metric of comparison between bin distributions from different cases is provided by the histogram intersection algorithm. This algorithm results in a histogram intersection factor (H) between 0 and 1, which represents the fraction of the radiation that is similar between the two cases. Therefore, if H evaluated between bin distributions for two completely different radiation problems is near 1, then they represent essentially the same radiation problem. This means that they depend on the same weighting of various radiation modeling parameters evaluated at the same pressure and temperature. If one of these cases agrees well with a radiation measurement, then the matching bin distributions provide justification for applying this experimental validation to the other case. Even for H values as low as 0.2, the measurement case could be considered relevant if there are no other useful measurements. This approach allows observed radiation measurements to directly inform radiative heating simulations, which allows NASA’s past and future investments in observed radiation measurements to directly inform the radiative heating uncertainty or margins for future vehicle design. This FPB approach is also used to determine shock-tube conditions for informing backshell radiative heating simulations, where the normal shock velocity and Lagrangian time from the shock is used for the binning variables instead of pressure and temperature.

Shock Layer Radiation↗
NASA NTRS1989

Radiative shock oscillations in AM Her cataclysmic binaries

The stability properties of radiative shocks in spherically symmetric accretion flows onto white dwarfs is discussed. Accretion rates that result in shock thicknesses ranging from thin to settling solutions are investigated. Models for white dwarf masses from 0.3 to 1.2 of the solar mass are presented. The effects of unequal ion and electron temperatures, electron thermal conduction, bremsstrahlung, and Compton cooling are included. It is shown that thick two-temperature shocks are unstable to oscillations in the fundamental mode for white dwarf mass up to and including 1.0 of the solar mass. The possibility that the 0.3 to 1.0 Hz optical Quasi-Periodic Oscillations (QPOs) observed in four AM Her type cataclysmic binaries are due to the first overtone instability. Low accretion rate shock instabilities may be responsible for the tens of seconds to several minute X-ray QPOs observed in some AM Her objects.

Wolff, M. T.↗
NASA NTRS2011

Uncertainty Analysis in Space Radiation Protection

Space radiation is comprised of high energy and charge (HZE) nuclei, protons, and secondary radiation including neutrons. The uncertainties in estimating the health risks from galactic cosmic rays (GCR) are a major limitation to the length of space missions, the evaluation of potential risk mitigation approaches, and application of the As Low As Reasonably Achievable (ALARA) principle. For long duration space missio ns, risks may approach radiation exposure limits, therefore the uncertainties in risk projections become a major safety concern and methodologies used for ground-based works are not deemed to be sufficient. NASA limits astronaut exposures to a 3% risk of exposure induced death (REID) and protects against uncertainties in risks projections using an assessment of 95% confidence intervals in the projection model. We discuss NASA s approach to space radiation uncertainty assessments and applications for the International Space Station (ISS) program and design studies of future missions to Mars and other destinations. Several features of NASA s approach will be discussed. Radiation quality descriptions are based on the properties of radiation tracks rather than LET with probability distribution functions (PDF) for uncertainties derived from radiobiology experiments at particle accelerators. The application of age and gender specific models for individual astronauts is described. Because more than 90% of astronauts are never-smokers, an alternative risk calculation for never-smokers is used and will be compared to estimates for an average U.S. population. Because of the high energies of the GCR limits the benefits of shielding and the limited role expected for pharmaceutical countermeasures, uncertainty reduction continues to be the optimal approach to improve radiation safety for space missions.

Cucinotta, Francis A.↗
NASA NTRS2015

Spacecraft Charging Sensitivity to Material Properties

Evaluating spacecraft charging behavior of a vehicle in the space environment requires knowledge of the material properties relevant to the charging process. Implementing surface and internal charging models requires a user to specify a number of material electrical properties including electrical resistivity parameters (dark and radiation induced), dielectric constant, secondary electron yields, photoemission yields, and breakdown strength in order to correctly evaluate the electric discharge threat posed by the increasing electric fields generated by the accumulating charge density. In addition, bulk material mass density and/or chemical composition must be known in order to analyze radiation shielding properties when evaluating internal charging. We will first describe the physics of spacecraft charging and show how uncertainties in material properties propagate through spacecraft charging algorithms to impact the results obtained from charging models. We then provide examples using spacecraft charging codes to demonstrate their sensitivity to material properties. The goal of this presentation is to emphasize the importance in having good information on relevant material properties in order to best characterize on orbit charging threats.

Minow, Joseph I.↗
NASA NTRS1987

Effects of high energy radiation on the mechanical properties of epoxy/graphite fiber reinforced composites

Publications and theses generated on composite research are listed. Surface energy changes of an epoxy based on tetraglycidyl diaminodiphenyl methane (TGDDM)/diaminodiphenyl sulfone (DDS), T-300 graphite fiber and T-300/5208 (graphite fiber/epoxy) composites were investigated after irradiation with 0.5 MeV electrons. Electron spin resonance (ESR) investigations of line shapes and the radical decay behavior were made of an epoxy based on tetraglycidyl diaminodiphenyl methane (TGDDM)/diaminodiphenyl sulfone (DDS), T-300 graphite fiber, and T-300/5208 (graphite fiber/epoxy) composites after irradiation with Co(60) gamma-radiation or 0.5 MeV electrons. The results of the experiments are discussed.

Fornes, R. E.↗
DOE OSTI2021

Radiation GRMHD simulations of M87: funnel properties and prospects for gap acceleration

Here, we use the public code EBHLIGHT to carry out 3D radiative general relativistic magnetohydrodynamics (GRMHD) simulations of accretion on to the supermassive black hole in M87. The simulations self-consistently evolve a frequency-dependent Monte Carlo description of the radiation field produced by the accretion flow. We explore two limits of accumulated magnetic flux at the black hole (SANE and MAD), each coupled to several subgrid prescriptions for electron heating that are motivated by models of turbulence and magnetic reconnection. We present convergence studies for the radiation field and study its properties. We find that the near-horizon photon energy density is an order of magnitude higher than is predicted by simple isotropic estimates from the observed luminosity. The radially dependent photon momentum distribution is anisotropic and can be modeled by a set of point-sources near the equatorial plane. We draw properties of the radiation and magnetic field from the simulation and feed them into an analytic model of gap acceleration to estimate the very high energy (VHE) γ-ray luminosity from the magnetized jet funnel, assuming that a gap is able to form. We find luminosities of $\rm \sim 10^{41} \, erg \, s^{-1}$ for MAD models and $\rm \sim 2\times 10^{40} \, erg \, s^{-1}$ for SANE models, which are comparable to measurements of M87’s VHE flares. The time-dependence seen in our calculations is insufficient to explain the flaring behaviour. Our results provide a step towards bridging theoretical models of near-horizon properties seen in black hole images with the VHE activity of M87.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2003

Correlation of Radiation Dosage With Mechanical Properties of Thin Films

The objective of this investigation was to examine the relationship between irradiation level (proton dose), microstructure, and stress levels in chemical vapor deposited diamond and polysilicon film using crosssectioned specimens. However, the emphasis was placed on the diamond specimen because diamond holds much promise for use in advanced technologies. The use of protons allows not only the study of the charged particle that may cause the most microstructural damage in Earth-orbit microelectromechanical systems (MEMS) devices, but also allows the study of relatively deeply buried damage inside the diamond material. Using protons allows these studies without having to resort to megaelectronvolt implant energies that may create extensive damage due to the high energy that is needed for the implantation process. Since 1 MEMS devices operating in space will not have an opportunity to reverse radiation damage via annealing, only nonannealed specimens were investigated. The following three high spatial resolution techniques were used to examine these relationships: (I) Scanning electron microscopy, (2) micro-Raman spectroscopy, and (3) micro x-ray diffraction.

Newton, R. L.↗
NASA NTRS1921

Properties of Special Types of Radiators

This report discusses the general performance characteristics of three special classes of radiators: those with flat plate water tubes, fin and tube types, and types that whistle in an air stream. Curves and tables show the performance of representative radiators of each class and compare the flat plate and whistling types. Empirical equations are given for estimating the performance of flat plate radiators of various dimensions. This report also contains a brief discussion, with curves, showing the effect of yawing on the properties of a radiator.

Parsons, S R↗
NASA NTRS2024

Modeling Atmospheric Brown Carbon in the GISS ModelE Earth System Model

Brown carbon (BrC) is an absorbing organic aerosol (OA), primarily emitted through biomass burning (BB), which exhibits light absorption unique to both black carbon (BC) and other organic aerosols. Despite many field and laboratory studies seeking to constrain BrC properties, the radiative forcing (RF) of BrC is still highly uncertain. To better understand its climate impact, we introduced BrC to the One-Moment Aerosol (OMA) module of the GISS ModelE Earth system model (ESM). We assessed ModelE sensitivity to primary BrC processed through a novel chemical aging scheme and to secondary BrC formed from biogenic volatile organic compounds (BVOCs). Initial results show that BrC typically contributes a top-of-the-atmosphere (TOA) radiative effect of 0.04 W m −2 . Sensitivity tests indicate that explicitly simulating BrC (separating it from other OAs), including secondary BrC, and simulating chemical bleaching of BrC contribute distinguishable radiative effects and should be accounted for in BrC schemes. This addition of prognostic BrC to ModelE allows greater physical and chemical complexity in OA representation with no apparent trade-off in model performance, as the evaluation of ModelE aerosol optical depth against Aerosol Robotic Network (AERONET) and Moderate Resolution Imaging Spectroradiometer (MODIS) retrieval data, with and without the BrC scheme, reveals similar skill in both cases. Thus, BrC should be explicitly simulated to allow more physically based chemical composition, which is crucial for more detailed OA studies like comparisons to in situ measurement campaigns. We include a summary of best practices for BrC representation within ModelE at the end of this paper.

brown carbon aerosols↗