Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REENTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Study of the decay and recovery of orbiting artificial space objects

The reentry of earth-orbiting space objects unconsumed in the atmosphere represents a potential hazard to populated areas of the earth. The Smithsonian Astrophysical Observatory has conducted a program called Moonwatch, whose purposes were to observe orbiting artificial satellites and reentries of space objects and, if possible, to recover and analyze reentered pieces. In addition, through observations of low-perigee objects, data obtained by Moonwatchers have been instrumental in defining some of the factors affecting satellite decay. The objectives of the program are presented, and the problems that enter into satellite-orbit and decay predictions are addressed. Moonwatchers contributed substantially to increasing an overall prediction capability, and some of the specific achievements over the 6-year period are cited.

Source record↗

The total hemispherical emittance of silicon-carbide coated reinforced carbon composites in the temperature range 100 K to 450 K

This paper deals with the measurement of the total hemispherical emittance of a silicon carbide coated carbon composite which is the thermal control material of the nose cone and leading edges of the Space Shuttle. In order to effect the thermal design of the spacecraft, it is desirable to have emittance data available for the temperature range 100 K to 2000 K to encompass the thermal extremes associated with orbiting and reentry conditions. Since the multiple thermal cycling associated with fifty to one hundred missions might result in substantial property changes, the data to be presented are for the low temperature regime 100 K to 450 K for both virgin material and material which was thermally treated to simulate multiple reentries. The discussion emphasizes the identification of possible sources of error in the measurement of equilibrium temperatures and the extent to which these measurement errors or uncertainties would alter the derived emittance values.

Mcgrath, J. J.↗

Ablative performance of carbon-carbon nosetips in simulated re-entry environments

A summary is presented of ablation performance data for carbon-carbon nosetip models obtained over a range of pressures from 10 to 168 atm. Two classes of tests are reviewed: (1) steady state, in which a constant environment is imposed on the model, and (2) ramp, in which the pressure is increased from 10 to 80 atmospheres to simulate re-entry pressure history. Comparison of arc test parameters with typical reentry vehicle parameters is included, to assess the adequacy of the test simulation. Based on this comparison, recommendations are made for facility developments which would yield improved simulation capability for reentry vehicle nosetip ablative performance.

Nestler, D. E.↗

Reentering space objects - Facts and fiction

The problem of unprogrammed reentry is discussed with particular reference to the case of Cosmos 954. A brief explanation of the mechanics of reentry is provided and relevant statistical data are examined. The uncertainty involved in predicting the landing site of such objects is emphasized.

Doyle, S. E.↗

Monte Carlo analysis of satellite debris footprint dispersion

A comprehensive study is performed to investigate satellite debris impact point dispersion using a combination of Monte Carlo statistical analysis and parametric methods. The Monte Carlo technique accounts for nonlinearities in the entry point dispersion, which is represented by a covariance matrix of position and velocity errors. Because downrange distance of impact is a monotonic function of debris ballistic coefficient, a parametric method is useful for determining dispersion boundaries. The scheme is applied in the present analysis to estimate the Skylab footprint dispersions for a controlled reentry. A significant increase in the footprint dispersion is noticed for satellite breakup above a 200,000-ft altitude. A general discussion of the method used for analysis is presented together with some typical results obtained for the Skylab deboost mission, which was designed before NASA abandoned plans for a Skylab controlled reentry.

Rao, P. P.↗

Long-term risk analysis associated with nuclear waste disposal in space

An assessment and verification of previous analytic results on the long term risk of earth reentry for hazardous payloads is presented. The two areas were studied: (1) stability of nominal, near-circular storage orbits in the regions between Venus and earth and between earth and Mars, and (2) probability of earth reentry for off-nominal planet-crossing orbits resulting from deployment system failures. In the first area, numerical integrations of the equations of motion are compared with stability predications based on secular perturbation theory. The agreement is good in terms of the heliocentric distances covered and the general behavior of the orbital history, although certain near-resonance situations can lead to difficulty. In the second area, a Monte Carlo simulation of orbital evolution is used and the results compared with Opik's analytic theory of planetary encounters and collision statistics, with data verified to within a close order-of-magnitude.

Friedlander, A. L.↗

Three-dimensional optimum maneuvers of a hypervelocity vehicle

In this paper the optimum three-dimensional maneuver in lift and bank control of a reentry vehicle is investigated. The use of the modified Chapman's variables and a normalized lift coefficient allows a general discussion of the optimum control of an arbitrary vehicle reentering any planetary atmosphere. Several planar problems are solved. Using the condition of equilibrium glide, the maximum cross range and the footprint of a reentry vehicle from circular speed are computed in terms of the maximum lift-to-drag ratio.

Vinh, N. X.↗

Press conference on Skylab

A discussion on the Skylab reentry date and its predicted effects is presented. The plans for a coordination center and its activities to monitor the reentry of Skylab are discussed.

Source record↗

Orbiter door closure tools

Safe reentry of the shuttle orbiter requires that the payload bay doors be closed and securely latched. Since a malfunction in the door drive or bulkhead latch systems could make safe reentry impossible, the requirement to provide tools to manually close and secure the doors was implemented. The tools would disconnect a disabled door or latch closure system and close and secure the doors if the normal system failed. The tools required to perform these tasks have evolved into a set that consists of a tubing cutter, a winch, a latching tool, and a bolt extractor. The design, fabrication, and performance tests of each tool are described.

Acres, W. R.↗

Analytic theory of orbit contraction and ballistic entry into planetary atmospheres

A space object traveling through an atmosphere is governed by two forces: aerodynamic and gravitational. On this premise, equations of motion are derived to provide a set of universal entry equations applicable to all regimes of atmospheric flight from orbital motion under the dissipate force of drag through the dynamic phase of reentry, and finally to the point of contact with the planetary surface. Rigorous mathematical techniques such as averaging, Poincare's method of small parameters, and Lagrange's expansion, applied to obtain a highly accurate, purely analytic theory for orbit contraction and ballistic entry into planetary atmospheres. The theory has a wide range of applications to modern problems including orbit decay of artificial satellites, atmospheric capture of planetary probes, atmospheric grazing, and ballistic reentry of manned and unmanned space vehicles.

Longuski, J. M.↗

Simulated spaceflight effects on mating and pregnancy of rats

The mating of rats was studied to determine the effects of: simulated reentry stresses at known stages of pregnancy, and full flight simulation, consisting of sequential launch stresses, group housing, mating opportunity, diet, simulated reentry, and postreentry isolation of male and female rats. Uterine contents, adrenal mass and abdominal fat as a proportion of body mass, duration of pregnancy, and number and sex of offspring were studied. It is found that: (1) parturition following full flight simulation was delayed relative to that of controls; (2) litter size was reduced and resorptions increased compared with previous matings in the same group of animals; and (3) abdominal fat was highly elevated in animals that were fed the Soviet paste diet. It is suggested that the combined effects of diet, stress, spacecraft environment, and weightlessness decreased the probability of mating or of viable pregnancies in the Cosmos 1129 flight and control animals.

Sabelman, E. E.↗

Space Shuttle STS-1 SRB damage investigation

The physical damage incurred by the solid rocket boosters during reentry on the initial space shuttle flight raised the question of whether the hardware, as designed, would yield the low cost per flight desired. The damage was quantified, the cause determined and specific design changes recommended which would preclude recurrence. Flight data, postflight analyses, and laboratory hardware examinations were used. The resultant findings pointed to two principal causes: failure of the aft skirt thermal curtain at the onset of reentry aerodynamic heating, and overloading of the aft shirt stiffening rings during water impact. Design changes were recommended on both the thermal curtain and the aft skirt structural members to prevent similar damage on future missions.

Nevins, C. D.↗

Environmental effects of SPS: The middle atmosphere

The heavy lift launch vehicle associated with the solar power satellite (SPS) would deposit in the upper atmosphere exhaust and reentry products which could modify the composition of the stratosphere, mesosphere, and lower ionosphere. In order to assess such effects, atmospheric model simulations were performed, especially considering a geographic zone centered at the launch and reentry latitudes.

Whitten, R. C.↗

Centerline latch tool for contingency orbiter door closure

The centerline latch tool was designed and developed as an EVA manual backup device for latching the Space Shuttle Orbiter's payload bay doors for reentry in case of a failure of the existing centerline latches to operate properly. The tool was designed to satisfy a wide variety of structural, mechanical, and EVA requirements. It provides a load path for forces on the payload bay doors during reentry. Since the tool would be used by an EVA crewmember, control, handgrips, operating forces, and procedures must be within the capabilities of a partially restrained, suited crewmember in a zero-gravity environment. The centerline latch tool described was designed, developed, and tested to meet these requirements.

Trevino, R. C.↗

Solid rocket booster sting interference wind tunnel test analysis, appendix D

Additional analyses of wind tunnel test results from SRB sting interference test TWT 660 and HRWT 042 were conducted to evaluate the sting interference that may be present in the Space Shuttle SRB reentry aerodynamic math model. Additional wind tunnel data was obtained at higher angles of attack from test program TWT 660 and test program HRWT 042. The additional data were analyzed to evaluate the procedures used to fair the data in the development of the SRB reentry aerodynamic data Tape no. 5.

Conine, B.↗

Catalytic recombination and Space Shuttle heating

The measurement of surface temperatures on the thermal protection materials of the Space Shuttle Orbiter during reentry provides the basis for an important test of the prediction techniques developed over the past 10 years for reacting flows over reentry vehicles. The present investigation is concerned with comparisons of calculated temperatures with those measured during the second and third Space Shuttle missions. The general trends of the calculations compared favorably with the measurements. However, the calculations overpredicted the temperatures on the forward part of the windward centerline. Agreement was better farther aft, especially at the later times in the entry. The investigation has pointed out the significance of surface chemical reactions on the heat flux to the surface of the Orbiter and the need for further understanding.

Scott, C. D.↗

Explanation of the hypersonic longitudinal stability problem: Lessons learned

Inviscid and viscous CFD codes have been applied to a modified Space Shuttle orbiter geometry to investigate differences between preflight aerodynamic predictions and aerodynamic data from hypersonic reentry flight. Flow field solutions were obtained for wind tunnel conditions and flight conditions to assess Mach number, real-gas, and viscous effects on the reentry aerodynamics of the orbiter. Based on the CFD studies, a methodology model has been developed to (1) extrapolate wind tunnel data to flight conditions and (2) calculate a DCM for use with the Aerodynamic Design Data Book. Comparisons are made with selected flight data. Results of the study indicate that the differences between flight and pre-STS-1 predictions of hypersonic pitching moment are primarily due the to Mach number and real-gas effects.

Griffith, B. J.↗

Orbiter Entry Heating Lessons Learned from Development Flight Test Program

The Space Shuttle orbiter's thermal protection system (TPS), designed mainly on the basis of wind tunnel test data, has successfully completed its design, development, and flight test program. The flight test data provide an exceptional opportunity to evaluate the use of wind tunnel test data for the design of TPS for reentry vehicles. Comparisons of flight test data against wind tunnel data used to design the orbiter's TPS were developed. These flight data, though still in the preliminary analysis phases, generally support the use of wind tunnel test data in the design of TPS for hypersonic reentry vehicles.

Haney, J. W., Jr.↗