Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Real-time {sup 90}Sr Counter

Radioisotopes have been emitted around Japan due to a nuclear accident at the Fukushima Daiichi nuclear power station in March 2011. A problem is the contaminated water including the atomic nucleus which relatively has a long half- life time and soluble such as {sup 90}Sr, {sup 137}Cs. Internal exposures by {sup 90}Sr are more dangerous than {sup 137}Cs's because Sr has effective half-life time of 18 years and property of accumulation in a born. We have developed real-time {sup 90}Sr counter which is sensitive beta-ray of maximum kinematic energy of 2.28 MeV from {sup 90}Sr and insensitive of beta-ray of maximum kinematic energy of 1.17 MeV and gamma-ray from {sup 90}Sr by Cherenkov detection. This counter composes of Cerenkov counter, trigger scintillation counter and veto counter. Silica aerogel for Cherenkov counter can obtain refractive index between 1.017 and 1.049 easily. And wavelength shifting fiber (WLSF) is used as a light guide for extending effective area and producing lower cost. A mechanism of the identification of {sup 90}Sr is explained in following. In case of {sup 90}Sr, when the trigger counter reacts on the beta-ray from {sup 90}Sr, aerogel emits the Cherenkov light and WLSF reacts and read the Cherenkov light. On the other hand, in case of {sup 137}Cs, the trigger counter reacts on the beta-ray, aerogel stops the beta- ray and Cherenkov light is not emitted. Therefore, aerogel has a function as a radiator and shielding material. the gamma-ray is not reacted on the lower density detector. Cosmic rays would be also reacted by the veto counter. A prototype counter whose the effective area is 30 cm x 10 cm was obtained (2.0±1.2){sup 3} of mis-identification as {sup 137}Cs/{sup 90}Sr. Detection limit in the surface contamination inspection depends on measurement time and effective area mainly. The sensitivity of wide range, 10{sup -2} - 10{sup 4} Bq/cm{sup 2}, is obtained by adjustment of detection level in circuit of this counter. A lower radioactive sample (< 10{sup -2} Bq/cm{sup 2}) allows be detected significantly by heating treatment to evaporate water shielding the beta-rays. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improving NO x Entitlement with Axial Staging

Manufacturers are constantly under pressure to increase the efficiency of air breathing gas turbines for the next generation of ground based combined cycle power plants without a significant increase in NO x emissions. Axially staging some of the fuel and air is one method manufacturers are exploring to increase the firing temperature with a minimal NO x increase. This project used a high-pressure combustion facility to systematically explore the axial stage design space at conditions relevant to engine manufacturers. Chemiluminescence and PIV images of the reacting jets were obtained as well as exit emissions. This data was used to create correlations for reacting jets-in-crossflow, analogous to what currently exists for non-reacting jets-in-crossflow. Two CFD programs were used to model these results to quantifying the accuracy of the codes and help elucidate the underlying physics that governs the high-pressure reacting jet in crossflow. This report indicates a change in flame/flow-field behavior, and emissions characteristics with increasing pressure from 1-5.5 atm. Additionally, the effects of preheating and premixing the axial jet are explored at various conditions and show increased jet liftoff leads to a decrease in NO x emissions.

03 NATURAL GAS↗

On Which Microphysical Time Scales to Use in Studies of Entrainment-Mixing Mechanisms in Clouds

The commonly used time scales in entrainment-mixing studies are examined in this paper to seek the most appropriate one, based on aircraft observations of cumulus clouds from the RACORO campaign and numerical simulations with the Explicit Mixing Parcel Model. The time scales include: τ evap , the time for droplet complete evaporation; τ phase , the time for saturation ratio deficit (S) to reach 1/e of its initial value; τ satu , the time for S to reach -0.5%; τ react , the time for complete droplet evaporation or S to reach -0.5%. It is found that the proper time scale to use depends on the specific objectives of entrainment-mixing studies. First, if the focus is on the variations of liquid water content (LWC) and S, then τ react for saturation, τ satu and τ phase are almost equivalently appropriate, because they all represent the rate of dry air reaching saturation or of LWC decrease. Second, if one focuses on the variations of droplet size and number concentration, τ react for complete evaporation and τ evap are proper because they characterize how fast droplets evaporate and whether number concentration decreases. Moreover, τ react for complete evaporation and τ evap are always positively correlated with homogeneous mixing degree (ψ), thus the two time scales, especially τ evap , are recommended for developing parameterizations. However, ψ and the other time scales can be negatively, positively, or not correlated, depending on the dominant factors of the entrained air (i.e., relative humidity or aerosols). Third and finally, all time scales are proportional to each other under certain microphysical and thermodynamic conditions.

54 ENVIRONMENTAL SCIENCES↗

Intramolecular 1,2 C-H Addition of o -Methyl Groups to Form Unique Ruthenium Pincer Tuck-in Complexes

New RPN H P ligands containing 2,4-xylyl (4mXPN H P) and mesityl (MesPN H P) groups on the phosphorus atoms were synthesized. 4mXPN H P reacts with [(cymene)RuCl 2 ] 2 followed by PMe 3 to produce κ 3 -4mXPN H PRu(PMe 3 )Cl 2 . MesPN H P reacts with [(cymene)RuCl 2 ] 2 to produce monomeric κ 3 -MesPN H PRuCl 2 that reacts with CO forming κ 3 -MesPN H PRu(CO)Cl 2 . Surprisingly, dehydrohalogenation of these complexes results in the activation of ortho methyl groups of the pincer ligands, rather than formation of κ 3 -RPNPRuLCl complexes. This results from transient κ 3 -RPNPRuLCl formation followed by 1,2-addition of an ortho C-H bond across the Ru-amide bond. The transient amide complex of κ 4 -4mXPN H PRu(PMe 3 )Cl was trapped with CO forming κ 3 -4mXPNPRu(PMe 3 )(CO)Cl. In contrast, κ 4 -MesPNHPRu(CO)Cl does not react with ligands to trap the expected amide complex of reverse C-H addition. Instead, CO and PMe 3 displace the chloride ligand forming cationic complexes. In both cases, hemi-lability of the pincer ligand was observed spectroscopically. In conclusion, the new complexes serve as precursors to moderately active catalysts for the acceptorless dehydrogenative coupling of n-butanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavelet-based algorithm for correction of beam-steering artefacts in turbulent flow imaging at elevated pressures

Beam steering by index-of-refraction gradients poses a significant challenge for laser-based imaging measurements in turbulent reacting and non-reacting flows, particularly at elevated pressures. High fidelity imaging and quantitative data interpretation in turbulent flows can be considerably impeded by artefacts generated from beam steering. A wavelet-based filtering scheme has been developed to recover the underlying turbulent flow structures from imaging measurements containing severe beam-steering artefacts. This analysis technique is equally applicable to imaging measurements in reacting and non-reacting flows. It is demonstrated using mixture fraction measurements in a transient turbulent jet flow at 8 bar using Rayleigh scattering imaging at a repetition rate of 100 kHz. In this paper, the corrected images reveal the temporal evolution of flow structures with negligible residual beam-steering artefacts. Tests of the sensitivity of the wavelet-based filtering scheme to noise and spatial resolution indicate that it is a robust analytic tool for correcting severe beam-steering artefacts commonly encountered in laser-based imaging measurements at elevated pressures.

47 OTHER INSTRUMENTATION↗

A monoclonal antibody IMab-1 specifically recognizes IDH1{sup R132H}, the most common glioma-derived mutation

IDH1 (isocitrate dehydrogenase 1) mutations have been identified as early and frequent genetic alterations in astrocytomas, oligodendrogliomas, and oligoastrocytomas as well as secondary glioblastomas. In contrast, primary glioblastomas very rarely contain IDH1 mutations, although primary and secondary glioblastomas are histologically indistinguishable. The IDH1 mutations are remarkably specific to a single codon in the conserved and functionally important Arg132 in IDH1. In gliomas, the most frequent IDH1 mutations (>90%) were G395A (R132H). In this study, we immunized mice with R132H-containing IDH1 (IDH1{sup R132H}) peptide. After cell fusion using Sendai virus envelope, the monoclonal antibodies (mAbs), which specifically reacted with IDH1{sup R132H}, were screened in ELISA. One of the mAbs, IMab-1 reacted with the IDH1{sup R132H} peptide, but not with wild type IDH1 (IDH1{sup wt}) peptide in ELISA. In Western-blot analysis, IMab-1 reacted with only the IDH1{sup R132H} protein, not IDH1{sup wt} protein or the other IDH1 mutants, indicating that IMab-1 is IDH1{sup R132H}-specific. Furthermore, IMab-1 specifically stained the IDH1{sup R132H}-expressing cells in astrocytomas in immunohistochemistry, whereas it did not react with IDH1{sup R132H}-negative primary glioblastoma sections. In conclusion, we established an anti-IDH1{sup R132H}-specific monoclonal antibody IMab-1, which should be significantly useful for diagnosis and biological evaluation of mutation-bearing gliomas.

60 APPLIED LIFE SCIENCES↗

Establishment of a novel monoclonal antibody SMab-1 specific for IDH1-R132S mutation

Research highlights: {yields} IDH1 mutations are early and frequent genetic alterations in gliomas. {yields} We newly established an anti-IDH1-R132S-specific mAb SMab-1. {yields} SMab-1 reacted with the IDH1-R132S peptide, but not with other IDH1 mutants. {yields} SMab-1 specifically stained the IDH1-R132S-expressing glioblastoma cells in immunocytochemistry and immunohistochemistry. {yields} SMab-1 should be useful in diagnosis of mutation-bearing gliomas. -- Abstract: Isocitrate dehydrogenase 1 (IDH1) mutations, which are early and frequent genetic alterations in gliomas, are specific to a single codon in the conserved and functionally important Arginine 132 (R132) in IDH1. We earlier established a monoclonal antibody (mAb), IMab-1, which is specific for R132H-containing IDH1 (IDH1-R132H), the most frequent IDH1 mutation in gliomas. To establish IDH1-R132S-specific mAb, we immunized mice with R132S-containing IDH1 (IDH1-R132S) peptide. After cell fusion using Sendai virus envelope, IDH1-R132S-specific mAbs were screened in ELISA. One mAb, SMab-1, reacted with the IDH1-R132S peptide, but not with other IDH1 mutants. Western-blot analysis showed that SMab-1 reacted only with the IDH1-R132S protein, not with IDH1-WT protein or IDH1 mutants, indicating that SMab-1 is IDH1-R132S-specific. Furthermore, SMab-1 specifically stained the IDH1-R132S-expressing glioblastoma cells in immunocytochemistry and immunohistochemistry, but did not react with IDH1-WT or IDH1-R132H-containing glioblastoma cells. We newly established an anti-IDH1-R132S-specific mAb SMab-1 for use in diagnosis of mutation-bearing gliomas.

60 APPLIED LIFE SCIENCES↗

Through a glass darkly: In-situ x-ray computed tomography imaging of feed melting in continuously fed laboratory-scale glass melter

his study describes the first direct in-situ 3-D observation of a steady-state melting process by imaging a laboratory-scale slurry-fed glass melter in operation by x-ray computed tomography. Features of the reacting glass-feed, the foam layer underneath, and cavities in the glass melt pool are reconstructed in three-dimensional images. A slurry pool formed in a deep central caldera of dense dried feed, which penetrated into the glass melt. Slurry overflow from the caldera led to fast-dried and highly porous feed structure. A thin layer of foam separated the caldera from the melt. Bubbles ?5-15 mm in diameter were seen to grow beneath the reacting feed and move through the melt to escape at the edge. Pore morphology is benchmarked against computed tomography scans of a pellet of reacting simulated waste glass feed, and evolved gas analysis describes the gases generated as a function of temperature. Cooling artifacts are imaged and compared to previous studies of quenched cold caps. Detailed understanding of processes occurring during the conversion process in and below the reacting feed layer is necessary for the development of representative models of the melting process.

36 MATERIALS SCIENCE↗

Element mobilization and immobilization from carbonate rocks between CO 2 storage reservoirs and the overlying aquifers during a potential CO 2 leakage

Despite the numerous studies on changes within the reservoir following CO2 injection and the effects of CO2 release into overlying aquifers, little or no literature is available on the effect of CO2 release on rock between the storage reservoirs and subsurface. To address this knowledge gap, relevant rock materials, temperatures and pressures were used to study mineralogical and elemental changes in this intermediate zone. After rocks reacted with CO2, liquid analysis showed an increase of major elements (e.g., Ca, and Mg) and variable concentrations of potential contaminants (e.g., Sr and Ba); lower concentrations were observed in N2 controls. In experiments with As/Cd and/or organic spikes, representing potential contaminants in the CO2 plume originating in the storage reservoir, most or all of these contaminants were removed from the aqueous phase. SEM and Mössbauer spectroscopy results showed the formation of new minerals and Fe oxides in some CO2-reacted samples, indicating potential for contaminant removal through mineral incorporation or adsorption onto Fe oxides. These experiments show the interactions between the CO2-laden plume and the rock between storage reservoirs and overlying aquifers have the potential to affect the level of risk to overlying groundwater, and should be considered during site selection and risk evaluation.

Environmental Molecular Sciences Laboratory↗

Reactivity deterioration of NiO/Al{sub 2}O{sub 3} oxygen carrier for chemical looping combustion of coal in a 10 kW{sub th} reactor

A relatively long-term experiment for chemical looping combustion of coal with NiO/Al{sub 2}O{sub 3} oxygen carrier was carried out in a 10 kW{sub th} continuous reactor of interconnected fluidized beds, and 100 h of operation was reached with the same batch of the oxygen carrier. The reactivity deterioration of the oxygen carriers was present during the experimental period. The reactivity deterioration of reacted oxygen carriers at different experimental stages was evaluated using X-ray diffraction (XRD), scanning electron microscope (SEM), and X-ray fluorescence spectrometer. SEM analysis showed no significant change in the morphology of the nickel-based oxygen carrier at the fuel reactor temperature {<=}940 C, but loss of surface area and porosity of reacted oxygen carriers was observed when the fuel reactor temperature exceeded 960 C. The results show that the sintering effect have mainly contributed to the reactivity deterioration of reacted oxygen carriers in the CLC process for coal, while the effects of coal ash and sulfur can be ignored. The oxidization of reduced oxygen carrier with air was an intensive exothermic process, and the high temperature of oxygen carrier particles led to sintering on the surface of oxygen carrier particles in the air reactor. Attention must be paid to control the external circulation of oxygen carrier particles in the interconnected fluidized beds in order to efficiently transport heat from the air reactor to the fuel reactor, and reduce the temperature of oxygen carrier particles in the air reactor. Improvement of reactivity deterioration of reacted oxygen carriers was achieved by the supplement of steam into the fuel reactor. Nevertheless, NiO/Al{sub 2}O{sub 3} is still one of the optimal oxygen carriers for chemical looping combustion of coal if the sintering of oxygen carrier is minimized at the suitable reactor temperature. (author)

01 COAL, LIGNITE, AND PEAT↗

Synthesis and characterization of hybrid materials based on 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and Dawson-type tungstophosphate K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O and K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O

In this study, we synthesized hybrid materials using well-Dawson polyoxometalates (POMs), K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O or K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF{sub 4}]). K, W, P and CHN elemental analysis showed that one mole of [H{sub 4}PW{sub 18}O{sub 62}]{sup 7-} reacts with 6 moles of BMIM{sup +} and one mole of [P{sub 2}W{sub 18}O{sub 62}]{sup 6-} reacts with 4 moles of BMIM{sup +} to form, respectively, K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. X-ray diffraction illustrated amorphous structure of the hybrid materials. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid materials compared to the parents Dawson POMs. Cyclic voltammetry showed that the reduction peak potentials of the Dawson anion in the hybrid materials shift towards negative values and the shift is more pronounced for K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} compared to K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. This was attributed to a decrease in the acidity of the Dawson POM anion in the hybrid material. -- Graphical abstract: Powder XRD patterns of (a) PW{sub 18}, (b) K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}, (c) P{sub 2}W{sub 18}, and (d) K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. Display Omitted Research highlights: {yields} 1-butyl-3-methylimidazolium tetrafluoroborate([BMIM][BF{sub 4}]) reacts with K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O to form K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}. {yields} [BMIM][BF{sub 4}] reacts with K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O to form K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} displayed amorphous structures. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} illustrated low water content. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} showed improved thermal stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study of vorticity-strain interactions in turbulent premixed counterflow flames

Here, the effects of heat release on interactions between vorticity (ω) and strain rate (s) in turbulent premixed CH 4 /O 2 /N 2 counterflow flames are investigated using simultaneous OH laser-induced fluorescence (LIF) and tomographic particle image velocimetry (TPIV) measurements. A comparison between the flames and a corresponding turbulent non-reacting variable density N 2 -vs-products counterflow reveals the impact of heat release on vorticity-strain rate alignment statistics. Vorticity and strain rate statistics in the flames and non-reacting flow are conditioned on distance from the local flame front and gas mixing layer interface (GMLI) contours, respectively. The magnitude, alignment, and spatial distribution of the vorticity and principal strain rates (s 1 , s 2 , s 3 ) are rather different when heat release is present. Density variations without heat release enhance the ω-s 2 alignment while significantly reducing the ω-s 3 alignment and modestly reducing the ω-s 1 alignment. In contrast, heat release at the flame front further reduces the ω-s 1 alignment but increases the ω-s 3 alignment and suppresses the preferential ω-s 2 alignment. Furthermore, increasing turbulence diminishes the effect of heat release on this preferential alignment. In regions with the largest vorticities, both the reacting and non-reacting counterflows show an increase in the probability of ω-s 2 alignment. All counterflow cases have a net positive vortex-stretching contribution to the enstrophy production with a peak production rate at the flame front or GMLI, but the peak values depend on the density variation, heat release, and turbulence level. Elucidation of the complex interplay between these factors contributes to the understanding of the dynamics of turbulence-flame interactions.

42 ENGINEERING↗

Liquid Structure of CO 2 –Reactive Aprotic Heterocyclic Anion Ionic Liquids from X-ray Scattering and Molecular Dynamics

A combination of X-ray scattering experiments and molecular dynamics simulations were conducted to investigate the structure of ionic liquids (ILs) which chemically bind CO 2 . The structure functions were measured and computed for four different ILs consisting of two different phosphonium cations, triethyloctylphosphonium ([P 2228 ] + ) and trihexyltetradecylphosphonium ([P 66614 ] + ), paired with two different aprotic heterocyclic anions which chemically react with CO 2 , 2-cyanopyrrolide, and 1,2,4-triazolide. Simulations were able to reproduce the experimental structure functions, and by deconstructing the simulated structure functions, further information on the liquid structure was obtained. All structure functions of the ILs studied had three primary features which have been seen before in other ILs: a prepeak near 0.3–0.4 Å–1 corresponding to polar/nonpolar domain alternation, a charge alternation peak near 0.8 Å–1, and a peak near 1.5 Å–1 due to interactions of adjacent molecules. The liquid structure functions were only mildly sensitive to the specific anion and whether or not they were reacted with CO 2 . Upon reacting with CO 2 , small changes were observed in the structure functions of the [P 2228 ] + ILs, whereas virtually no change was observed upon reacting with CO 2 in the corresponding [P 66614 ] + ILs. When the [P 2228 ] + cation was replaced with the [P 66614 ] + cation, there was a significant increase in the intensities of the prepeak and adjacency interaction peak. While many of the liquid structure functions are similar, the actual liquid structures differ as demonstrated by computed spatial distribution functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Alternating trans - A - alt - B Copolymers through Ring-Opening Metathesis Polymerization Initiated by Molybdenum Imido Alkylidene Complexes

Ring-opening metathesis polymerization (ROMP) is enabled to prepare trans-poly(A-alt-B) polymers from a 1:1 mixture of A and B where A is a cyclic olefin such as cyclooctene (A 1 ) or cycloheptene (A 2 ) and B is a large norbornadiene or norbornene derivative such as 2,3-dicarbomethoxy-7-isopropylidenenorbornadiene (B 1 ) or dimethylspirobicyclo[2.2.1]hepta-2,5-diene-2,3-dicarboxylate-7,1'-cyclopropane (B 2 ). The most successful initiators that were examined are of the type Mo(NR)(CHCMe 2 Ph)[OCMe(CF 3 ) 2 ] 2 (R = 2,6-Me 2 C 6 H 3 (1) or 2,6-i-Pr 2 C 6 H 3 (2)). The trans configuration of the AB linkages is proposed to result from the steric demand of B. Both anti-MB and syn-MB alkylidenes are observed during the copolymerization, where B was last inserted into a Mo=C bond, although anti-MB dominates as the reaction proceeds. anti-MB is lower in energy than syn-MB, does not react readily with eitherA or B, and interconverts slowly with syn-MB through rotation about the Mo=C bond. Syn-MB does not readily react with B, but it does react slowly with A (rate constant ~1 M –1 s –1 ) to give anti-MA and one trans-AB linkage. anti-MA then reacts with B (rate constant ~300 M –1 s –1 or larger) to give syn-MB and the second trans-AB linkage. The reaction has been modeled using experimental data in order to obtain the estimated rate constants above. The reaction between anti-MA and A is presented to give rise to AA linkages, but AA dyads can amount to <5%. Several other A and B monomers, initiators, and conditions were researched.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale Interfacial Smoothing and Dissolution during Unconventional Reservoir Stimulation Implications for Hydrocarbon Mobilization and Transport

Hydraulic fracturing of low-permeability rocks significantly enhances hydrocarbon production from unconventional reservoirs. However, fluid transport through low-permeability rocks, and the influence of geochemical transformations on pore networks, are poorly constrained. Mineral reactivity during interactions with injected water may alter the physical nature of the rock, which may affect hydrocarbon mobility. To assess alteration to the rock, we previously conducted a hydrothermal experiment that reacted cubed rock samples (1 cm3) with synthetic hydraulic fracturing fluid to simulate physicochemical reactivity during hydraulic fracturing. We analyzed unreacted and reacted rocks by small-angle neutron scattering and high-pressure mercury intrusion to determine how nanoscale (~1-1400 nm) pore networks of unconventional reservoir rocks are influenced by reaction with hydraulic fracturing injectates. We show that fluid-rock interactions have a two-fold influence on hydrocarbon recovery, promoting both hydrocarbon mobilization and transport. Pore-matrix interfaces smooth via removal of clay mineral surface asperities, reducing available surface area for hydrocarbon adsorption by ca. 12-75%. Additionally, hydraulic fracturing fluid-induced dissolution creates new pores with diameters ranging in size from 800-1400 nm, increasing the permeability of the rocks by a factor of 5-10. These two consequences of mineral dissolution act in concert to release hydrocarbons from the host rock and facilitate transport through the rock during unconventional reservoir production.

Herz-Thyhsen, Ryan↗

A Closer Look at Fe(II) Passivation of Goethite

Our understanding of how Fe(II) reacts with Fe(III) oxides has evolved significantly based on evidence for electron transfer at the oxide-water interface and Fe(II)-catalyzed recrystallization. Recent experiments, as well as computational calculations, further suggest that defects at oxide surfaces can facilitate electron transfer. There is, however, some evidence that these processes cease after continued contact with Fe(II). Here, we explore the sustainability of these processes over longer time frames by measuring whether exposure to Fe(II) inhibits Fe(II)-goethite electron transfer, and whether this inhibition is reversible. To quantify the extent of electron transfer, we used selective isotope labeling with 57Fe Mössbauer spectroscopy. The results revealed that pre-reacting goethite with Fe(II) decreases the extent of electron transfer during subsequent exposures, and that less electron transfer occurs with increasing reaction time. Similarly, X-ray absorption spectroscopy and magnetic circular dichroism suggest that reaction with Fe(II) consumes surface defects and forms a passivation layer, making goethite less susceptible to electron transfer. When Fe(II) is removed by either wet chemical extraction or oxidation, electron transfer is mostly restored, suggesting that inhibition of electron transfer is reversible. Our results show that in environmental systems, which are commonly subjected to transient geochemical fluctuations, electron transfer between Fe(II) and Fe oxides, and processes linked to it, are likely to be relevant beyond just short time scales.

Andrade de Notini, Luiza↗

Mechanism of Methane Chemical Looping Combustion with Hematite Promoted with CeO 2

Chemical looping combustion (CLC) is a promising technology for fossil fuel combustion that produces sequestration-ready CO{sub 2} stream, reducing the energy penalty of CO{sub 2} separation from flue gases. An effective oxygen carrier for CLC will readily react with the fuel gas and will be reoxidized upon contact with oxygen. This study investigated the development of a CeO{sub 2}-promoted Fe{sub 2}O{sub 3}-hematite oxygen carrier suitable for the methane CLC process. Composition of CeO{sub 2} is between 5 and 25 wt % and is lower than what is generally used for supports in Fe{sub 2}O{sub 3} carrier preparations. The incorporation of CeO{sub 2} to the natural ore hematite strongly modifies the reduction behavior in comparison to that of CeO{sub 2} and hematite alone. Temperature-programmed reaction studies revealed that the addition of even 5 wt % CeO{sub 2} enhances the reaction capacity of the Fe{sub 2}O{sub 3} oxygen carrier by promoting the decomposition and partial oxidation of methane. Fixed-bed reactor data showed that the 5 wt % cerium oxides with 95 wt % iron oxide produce 2 times as much carbon dioxide in comparison to the sum of carbon dioxide produced when the oxides were tested separately. This effect is likely due to the reaction of CeO{sub 2} with methane forming intermediates, which are reactive for extracting oxygen from Fe{sub 2}O{sub 3} at a considerably faster rate than the rate of the direct reaction of Fe{sub 2}O{sub 3} with methane. These studies reveal that 5 wt % CeO{sub 2}/Fe{sub 2}O{sub 3} gives stable conversions over 15 reduction/oxidation cycles. Lab-scale reactor studies (pulsed mode) suggest the methane reacts initially with CeO{sub 2} lattice oxygen to form partial oxidation products (CO + H{sub 2}), which continue to react with oxygen from neighboring Fe{sub 2}O{sub 3}, leading to its complete oxidation to form CO{sub 2}. The reduced cerium oxide promotes the methane decomposition reaction to form C + H{sub 2}, which continue to react with Fe{sub 2}O{sub 3}/Fe{sub 3}O{sub 4} to form CO/CO{sub 2} and H{sub 2}O. This mechanism is supported by the characterization studies, which also suggest that the formation of carbonaceous intermediates may affect the reaction rate and selectivity of the oxygen carrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗