Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Further Investigations of the Effect of Replacing Lithium by Sodium on Lithium Silicate Scintillating Glass Efficiency

Ce3+ doped lithium (6Li) silicate glasses are thermal neutron detectors. Prior work showed that when sodium (Na) is substituted for Li the scintillation efficiency, under beta particle stimulation, increased and then decreased as the sodium (Na) content was increased [1]. When all the 6Li was replaced by Na no scintillation was observed. Raman spectra, acquired using a visible excitation source provided no evidence of anomalous behavior. SEM microscopy did show some phase separation, but there was no obvious correlation with the scintillation efficiency. We have reexamined these glass samples using deep UV Raman excitation which reduces fluorescence interference. The newly acquired spectra show evidence of phase separation in the glasses. Specifically we see a peak at 800 cm-1 Raman shift which can be assigned to a vitreous silica moiety that results from phase separation. There is a strong correlation between this peak's area, the scintillation efficiency, and the Na content. The observed trend suggests that phase separation enhances scintillation and addition of Na reduces the amount of phase separation. We also see evidence of at least two defect structures that can be tentatively assigned to a three-membered ring structure and an oxygen vacancy. The latter is fairly strongly correlated with enhanced scintillation efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-Beam Synthesis of the Crystalline Ge Phase in SiO{sub x}N{sub y} Films upon Annealing under High Pressure

The nucleation of the crystalline Ge phase in SiO{sub x}N{sub y} films implanted with Ge{sup +} ions with the energy 55 keV to doses of 2.1 × 10{sup 15}–1.7 × 10{sup 16} cm{sup –2} and then annealed at a temperature of T{sub a} = 800–1300°C under pressures of 1 bar and 1–12 kbar is studied. From analysis of the Raman spectra, it is concluded that amorphous Ge precipitates increase in size upon hydrostatic compression at a temperature of 1000°C. Raman scattering at optical phonons localized in Ge nanocrystals is observed only after annealing of the samples with the highest content of implanted atoms at a temperature of 1300°C. In the photoluminescence spectra, a peak is observed at the wavelength ∼730 nm. The peak is considered to be the manifestation of the quantum-confinement effect in nanocrystals ∼3 nm in size.

36 MATERIALS SCIENCE↗

Dicarboxylate assisted synthesis of the monoclinic heterometallic tetrathiocyanato bridged copper(II) and mercury(II) coordination polymer {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n}: Synthesis, structural, vibration, luminescence, EPR studies and DFT calculations

The synthesis of the monoclinic polymorph of {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The compound, as determined by X-ray diffraction of a twinned crystal, consists of mercury and copper atoms linked by {mu}{sub 1,3}-SCN bridges. The crystal packing shows a highly porous infinite 3D structure. Diagnostic resonances for the SCN{sup -} ligand and metal-ligand bonds in the IR, far-IR and Raman spectra are assigned and discussed. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. The DFT calculations show that the observed luminescence of the compound arises mainly from an excited LLCT state with small MLCT contributions (from the copper to unoccupied {pi}{sup *} orbital of the thiocyanate groups). The X-band EPR spectrum of the powdered sample at room temperature reveals an axial signal with anisotropic g factors consistent with the unpaired electron of Cu(II) ion in the d{sub x}{sup 2}{sub -y}{sup 2} orbital. -- Graphical abstract: Synthesis and X-ray structure determination of the monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The IR, far-IR, Raman, photoluminescence as well as EPR spectra of the compound is discussed. Also, the emission and semiconducting behavior of the compound is illustrated through the density functional theory calculation of electronic band structure along with density of states. Display Omitted Research highlights: > The monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} has been prepared. > The structure of the compound is determined by XRD of a twinned crystal. > The IR, far-IR, Raman, EPR and emission spectra of the compound is investigated. > As shown by DFT calculations, the emission bands of the compound are mainly LLCT. > Small MLCT from the copper to the thiocyanate groups contributes to these bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation of structure and ion conduction in La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) oxygen ion conductors

Correlation of structure and ion conduction of La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) has been investigated. The cubic symmetry with space group P2{sub 1}3 and other structural parameters are obtained from Rietveld refinement of X-ray diffraction patterns of Y doped samples. The average lanthanum-oxygen and molybdenum-oxygen distances are obtained from the electron density contour plot. The transmission electron microscopic study confirms the cubic nature of the samples and also provides an estimate of thickness of the grain boundary. The scanning transmission electron microscope energy dispersive spectrometer mapping confirms the different orientations of grains. The composition dependence of the ionic conductivity has been correlated with that of O2 and O3 site occupancies in the [O1La{sub 3}Mo] antitetrahedral unit. The different vibrational modes in the low frequency region due to vibration of Mo-O bands are confirmed from the analysis of FTIR and Raman spectra. The full widths at half maximum of most of the Mo-O bands are found to be independent of Y doping. Additionally, the shifts in the position of Raman bands are correlated with unit cell parameter using Grüneisen constant.

36 MATERIALS SCIENCE↗

Distinct spin–lattice and spin–phonon interactions in monolayer magnetic CrI 3

In this study, we apply the density-functional theory to study various phases (including non-magnetic (NM), anti-ferromagnetic (AFM), and ferromagnetic (FM)) in monolayer magnetic chromium triiodide (CrI 3 ), a recently fabricated 2D magnetic material. It is found that: (1) the introduction of magnetism in monolayer CrI 3 gives rise to metal-to-semiconductor transition; (2) the electronic band topologies as well as the nature of direct and indirect band gaps in either AFM or FM phases exhibit delicate dependence on the magnetic ordering and spin–orbit coupling; and (3) the phonon modes involving Cr atoms are particularly sensitive to the magnetic ordering, highlighting distinct spin–lattice and spin–phonon coupling in this magnet. First-principles simulations of the Raman spectra demonstrate that both frequencies and intensities of the Raman peaks strongly depend on the magnetic ordering. The polarization dependent A 1g modes at 77 cm -1 and 130 cm -1 along with the E g mode at about 50 cm -1 in the FM phase may offer a useful fingerprint to characterize this material. Lastly, our results not only provide a detailed guiding map for experimental characterization of CrI 3 , but also reveal how the evolution of magnetism can be tracked by its lattice dynamics and Raman response.

36 MATERIALS SCIENCE↗

Photoluminescence and Raman spectroscopy of wide bandgap semiconductors damaged by deep-UV laser irradiation

The effects of a pulsed, focused, deep-UV (4.66 eV) laser on wide and ultra-wide bandgap semiconductors were investigated with photoluminescence (PL) and Raman spectroscopy. Three semiconductor single crystals were studied: silicon carbide (6H-SiC), gallium nitride (GaN), and gallium oxide (β-Ga 2 O 3 ). Atomic emission lines from neutral Ga or Si were observed during the laser-damage process. For all three semiconductors, PL mapping (3.49 eV laser excitation) of the damaged material revealed visible emission bands in the 2.6–2.8 eV range, attributed to point defects. Raman spectra (2.33 eV excitation) showed a reduction in the Raman peak intensities in the damaged region, along with weak PL bands around 1.9–2.1 eV.

36 MATERIALS SCIENCE↗

Structural dependence of crystallization in glasses along the nepheline (NaAlSiO 4 ) ‐ eucryptite (LiAlSiO 4 ) join

Abstract Lithium and sodium aluminosilicates are important glass‐forming systems for commercial glass‐ceramics, as well as being important model systems for ion transport in battery studies. In addition, uncontrolled crystallization of LiAlSiO 4 (eucryptite) in high‐Li 2 O compositions, analogous to the more well‐known problem of NaAlSiO 4 (nepheline) crystallization, can cause concerns for long‐term chemical durability in nuclear waste glasses. To study the relationships between glass structure and crystallization, nine glasses were synthesized in the Li x Na 1‐ x AlSiO 4 series, from x = 0 to x = 1. Raman spectra, nuclear magnetic resonance ( NMR ) spectroscopy (Li‐7, Na‐23, Al‐27, Si‐29), and X‐ray diffraction were used to study the quenched and heat‐treated glasses. It was found that different LiAlSiO 4 and NaAlSiO 4 crystal phases crystallize from the glass depending on the Li/Na ratio. Raman and NMR spectra of quenched glasses suggest similar structures regardless of alkali substitution. Li‐7 and Na‐23 NMR spectra of the glass‐ceramics near the endmember compositions show evidence of several differentiable sites distinct from known Li x Na 1‐ x AlSiO 4 crystalline phases, suggesting that these measurements can reveal subtle chemical environment differences in mixed‐alkali systems, similar to what has been observed for zeolites.

Marcial, José↗

Decomposition of W(CO)[subscript 6] at high pressures and temperatures

The decomposition of hexacarbonyltungsten, W(CO){sub 6}, has been studied. The decomposition was induced by heating W(CO){sub 6} in an autoclave at 523 K and pressures up to 1.8 MPa, and by laser heating in a diamond anvil cell at pressures between 5 and 18 GPa. The products have been characterized using synchrotron X-ray diffraction, pair distribution function analysis, Raman spectroscopy and scanning electron microscopy. Decomposition in the autoclave at the lower pressures resulted in the formation of a metastable tungsten carbide, W{sub 2}C, with an average particle size of 1-2 nm, and an unidentified nanocrystalline tungsten oxide and nanocrystalline graphite with average particle sizes of 1-2 and 11 nm, respectively. The existence of nanocrystalline graphite was deduced from micro-Raman spectra and the graphite particle size was extracted from the intensities of the Raman modes. The high-pressure decomposition products obtained in the diamond anvil cell are the monoclinic tungsten oxide phase WO{sub 2} and the high-pressure phase W{sub 3}O{sub 8}(I). The approximate average size of the graphite particles formed here was 6-8 nm. The bulk modulus of W(CO){sub 6} is B{sub 0} {approx_equal} 13 GPa.

36 MATERIALS SCIENCE↗

Effect of pressure on heterocyclic compounds: Pyrimidine and s-triazine

We have examined the high-pressure behaviors of six-membered heterocyclic compounds of pyrimidine and s-triazine up to 26 and 26.5 GPa, respectively. Pyrimidine crystallizes in Pna2{sub 1} symmetry (phase I) with the freezing pressure of 0.3 GPa, and transforms to another phase (phase II) at 1.1 GPa. Raman spectra of several compression-decompression cycles demonstrate there is a critical pressure of 15.5 GPa for pyrimidine. Pyrimidine returns back to its original liquid state as long as the highest pressure is below 15.1 GPa. Rupture of the aromatic ring is observed once pressure exceeds 15.5 GPa during a compression-decompression cycle, evidenced by the amorphous characteristics of the recovered sample. As for s-triazine, the phase transition from R-3c to C2/c is well reproduced at 0.6 GPa, in comparison with previous Raman data. Detailed Raman scattering experiments corroborate the critical pressure for s-triazine may locate at 14.5 GPa. That is, the compression is reversible below 14.3 GPa, whereas chemical reaction with ring opening is detected when the final pressure is above 14.5 GPa. During compression, the complete amorphization pressure for pyrimidine and s-triazine is identified as 22.4 and 15.2 GPa, respectively, based on disappearance of Raman lattice modes. Synchrotron X-ray diffraction patterns and Fourier transform infrared spectra of recovered samples indicate the products in two cases comprise of extended nitrogen-rich amorphous hydrogenated carbon (a-C:H:N)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpretable machine learning models classify minerals via spectroscopy

Developing methods to identify mineral species confidently and rapidly from Raman spectral analysis is critical to numerous fields. Traditionally, analysis relies on pattern matching the Raman spectrum of an unknown dataset with a supporting library of well-characterized spectral data, which may prove difficult for environmental samples that are poorly crystalline or phase mixtures. Here, we developed interpretable machine learning models that can classify uranium minerals by secondary oxyanion chemistry and other physicochemical properties based solely on Raman spectra. This new ML method produces a mineral profile of physical and chemical properties for an unknown sample and can rapidly classify or identify unknown minerals from Raman data, without the need for an exact pattern match in a spectral library. Training models are validated by 1. Strong correlation of high confidence model regions with published spectroscopic assignments and 2. Correct classification of a mineral not present in training data. Training data are from the Compendium of Uranium Raman and Infrared Experimental Spectra and available crystallographic information files within the open-source Smart Spectral Matching scientific framework. Physically meaningful classifier models can rapidly identify key structural and chemical information about unknown uranium minerals and the overall methodology is broadly applicable for mineral phases.

Machine learning↗

The Temperature and Structure Dependence of Surface Tension of CaO-SiO{sub 2}-Na{sub 2}O-CaF{sub 2} Mold Fluxes

The surface tension of mold flux is one of the most important properties and varies with the temperature from the top to the bottom of the mold, which influences the adhesion and lubrication between the liquid mold flux and the solidified shell, further influencing the quality of the continuous billet. In the present paper, the effect of temperature on the surface tension of CaO-SiO{sub 2}-Na{sub 2}O-CaF{sub 2} mold-flux melts with different CaO/SiO{sub 2} mass ratios was investigated using the maximum-pull method. Furthermore, the microstructure of mold fluxes was analyzed using FT-IR and Raman spectra to discuss the change mechanism of surface tension. The results indicated that the temperature dependence of surface tension was different with different CaO/SiO{sub 2} mass ratios, and agreed with the modification of melt structure. When the CaO/SiO{sub 2} mass ratio was 0.67 and 0.85, the change of surface tension with temperature was relatively stable, and the influence of temperature on the structure was small. When the CaO/SiO{sub 2} mass ratio was 1.03 and 1.16, with an increase of temperature, the surface tension decreased linearly and the changing amplitude was large; the degree of polymerization of melts and average radii of silicon-oxygen anions also decreased, which intensified the molecular thermal motion and weakened the intermolecular interaction, resulting in a decrease of surface tension of melts.

36 MATERIALS SCIENCE↗

The Raman spectrum of CaCO{sub 3} polymorphs calcite and aragonite: A combined experimental and computational study

Powder and single crystal Raman spectra of the two most common phases of calcium carbonate are calculated with ab initio techniques (using a “hybrid” functional and a Gaussian-type basis set) and measured both at 80 K and room temperature. Frequencies of the Raman modes are in very good agreement between calculations and experiments: the mean absolute deviation at 80 K is 4 and 8 cm{sup −1} for calcite and aragonite, respectively. As regards intensities, the agreement is in general good, although the computed values overestimate the measured ones in many cases. The combined analysis permits to identify almost all the fundamental experimental Raman peaks of the two compounds, with the exception of either modes with zero computed intensity or modes overlapping with more intense peaks. Additional peaks have been identified in both calcite and aragonite, which have been assigned to {sup 18}O satellite modes or overtones. The agreement between the computed and measured spectra is quite satisfactory; in particular, simulation permits to clearly distinguish between calcite and aragonite in the case of powder spectra, and among different polarization directions of each compound in the case of single crystal spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Raman spectroscopy: A tool to investigate alpha decay damage in a PuO 2 crystal lattice and determining sample age since calcination

Raman microspectroscopy can be used to measure local physical properties of materials, such as the lattice parameter. Alpha decay induced lattice damage of plutonium dioxide (PuO 2 ) results in the growth of new bands and broadening of the T 2g band. A relationship between the change in the lattice parameter and storage time has been established in the literature using X-ray diffraction (XRD). In this work, our measured time-dependent Raman spectra of PuO 2 particulates matches the XRD results. This new Raman spectroscopic technique can provide dating information on the time elapsed since the last calcination of PuO 2 using a single >5 μm particulate in contrast to 50 mg of 10–50 μm particles required by XRD.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effect of XC functionals and dispersion corrections on the DFT‐computed structural and vibrational properties of SrCl 2 –NaCl and ZrF 4 –LiF

Density functional theory (DFT) calculations were performed to examine the impact of exchange–correlation (XC) functionals and van der Waals corrections (specifically the D3 method) on the structural and vibrational properties of the SrCl 2 –NaCl and ZrF 4 –LiF salt systems. Multiple XC functionals, including the local density approximation (LDA), the generalized gradient approximation using the Perdew–Burke–Ernzerhof (PBE) model, and its modified form suitable for solids (PBEsol), the dispersion-corrected PBE-D3 and PBEsol-D3, were considered. Of these functionals, LDA was found to exhibit the highest degree of error, while PBEsol and PBE-D3 displayed the least error. Underestimated lattice parameters compared with experimental values were observed to result in higher force constants, leading to an overprediction of vibrational frequencies. Conversely, an overestimation of lattice parameters was associated with lower vibrational frequencies. The methodology presented in this study yielded results that are in good agreement with experiment, irrespective of the method (finite differences vs. density functional perturbation theory) employed for calculating infrared and Raman spectra. It was further demonstrated that for alkali halides with weak Raman scattering, utilizing a supercell constructed from primitive cells better predicts Raman features than does the use of conventional cells.

Raman↗

Rovibrationally resolved Rayleigh and Raman scattering cross sections for molecular hydrogen

Accurate Rayleigh and Raman scattering cross sections, tensor components, depolarization ratios, and reversal coefficients for all rovibrational transitions within the X1Σg+ ground electronic state of H2 have been calculated. Raman spectra have been generated using these data. A method for calculating Raman scattering cross sections is formulated that is valid below the ionization threshold and in the region containing resonances, which explicitly accounts for all bound and dissociative vibrational levels of the bound intermediate electronic states and approximately accounts for the ionization continuum. A representative set of cross sections is presented for incident photon energies below 15 eV and compared with existing results in the literature where possible. Convergence of our results with an increasing number of bound intermediate electronic states is demonstrated. The accuracy of the Placzek–Teller approximation is discussed. The effect of accounting for the intermediate ionization continuum is investigated. Local thermal equilibrium cross sections are calculated for Rayleigh and Raman scattering. This work represents the most accurate and complete treatment of Raman scattering for molecular hydrogen to date. A total of 9582 Rayleigh and Raman scattering cross sections have been generated and are openly available on Zenodo under an open-source Creative Commons Attribution license at https://zenodo.org/doi/10.5281/zenodo.13441471.

74 ATOMIC AND MOLECULAR PHYSICS↗

Raman Spectroscopy as a Probe of Surface Oxides and Hydrides on Niobium

Raman microscopy/spectroscopy has been used in conjunction with AFM, tunneling and magnetic susceptibility to identify surface oxides and hydrides on annealed, recrystallized foils of high purity Nb and on single crystals of cavity grade Nb. Cold worked regions of the Nb foil as well as rough regions near grain boundaries showed clear evidence of ordered hydride phases which were identified by VASP phonon calculations. Cold worked regions also displayed enhanced surface paramagnetism. Surface enhanced Raman spectra have also been obtained using 1.0 nm Au depositon. The SERS spectra reveal hydride molecular species which are not observable by conventional Raman. These results indicate that Raman is a useful probe of Nb surfaces relevant for cavity performance

36 MATERIALS SCIENCE↗

Raman scattering in organic semiconductors based on erbium biphthalocyanine molecules and chlorine-containing europium-lutetium triphthalocyanine molecules

The Raman spectra of semiconductor structures based on erbium biphthalocyanine molecules and chlorine-substituted europium-lutetium triphthalocyanine molecules are studied on excitation with Ar{sup +} laser radiation at the wavelength 514 nm. The data on the spectral position of Raman intensity peaks related to vibronic states of the basic molecular groups forming the semiconductor are obtained. Raman lines irrelevant to the known vibronic states of the basic phthalocyanine molecular groups are observed in the ranges 100-500 and 500-900 cm{sup -1}. It is shown that, in the spectra of triphthalocyanine, some lines are structurally complex and shifted with respect to the characteristic lines of molecular groups by several inverse centimeters.

36 MATERIALS SCIENCE↗

Multipolar Raman Scattering vs Interfacial Nanochemistry: Case of 4-Mercaptopyridine on Gold

Caution needs to be exercised in associating changes in plasmon-enhanced Raman spectra with chemical transformations. This is demonstrated through a detailed analysis of tip-enhanced Raman (TER) scattering from 4-mercaptopyridine (MPY) on gold. The substrate used consists of gold nanoplates atop a gold surface featuring heterogeneous grooves, all coated with a monolayer of MPY. The brightest spectra across the substrate exhibit features that can only be recovered by considering the generalized polarizability of oriented MPY molecules. Finally, the complex TER spectra we observe do not mark interfacial chemistry, but rather, multipolar TER scattering driven by local field gradients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗