Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Procurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Enrichment Assay Methods Development for the Integrated Cylinder Verification System

International Atomic Energy Agency (IAEA) inspectors currently perform periodic inspections at uranium enrichment plants to verify UF 6 cylinder enrichment declarations. Measurements are typically performed with handheld high-resolution sensors on a sampling of cylinders taken to be representative of the facility's entire product-cylinder inventory. Pacific Northwest National Laboratory (PNNL) is developing a concept to automate the verification of enrichment plant cylinders to enable 100 percent product-cylinder verification and potentially, mass-balance calculations on the facility as a whole (by also measuring feed and tails cylinders). The Integrated Cylinder Verification System (ICVS) could be located at key measurement points to positively identify each cylinder, measure its mass and enrichment, store the collected data in a secure database, and maintain continuity of knowledge on measured cylinders until IAEA inspector arrival. The three main objectives of this FY09 project are summarized here and described in more detail in the report: (1) Develop a preliminary design for a prototype NDA system, (2) Refine PNNL's MCNP models of the NDA system, and (3) Procure and test key pulse-processing components. Progress against these tasks to date, and next steps, are discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

New York Canyon Stimulation

The New York Canyon Stimulation Project was to demonstrate the commercial application of Enhanced Geothermal System techniques in Buena Vista Valley area of Pershing County, Nevada. From October 2009 to early 2012, TGP Development Company aggressively implemented Phase I of Pre-Stimulation and Site/Wellbore readiness. This included: geological studies; water studies and analyses and procurement of initial permits for drilling. Oversubscription of water rights and lack of water needed for implementation of EGS were identified and remained primary obstacles. Despite extended efforts to find alternative solutions, the water supply circumstances could not be overcome and led TGP to determine a "No Go" decision and initiate project termination in April 2012.

15 GEOTHERMAL ENERGY↗

EDS V25 Containment Vessel Explosive Qualification Test Report

The V25 containment vessel was procured by the Project Manager, Non-Stockpile Chemical Materiel (PMNSCM) as a replacement vessel for use on the P2 Explosive Destruction Systems. It is the first EDS vessel to be fabricated under Code Case 2564 of the ASME Boiler and Pressure Vessel Code, which provides rules for the design of impulsively loaded vessels. The explosive rating for the vessel based on the Code Case is nine (9) pounds TNT-equivalent for up to 637 detonations. This limit is an increase from the 4.8 pounds TNT-equivalency rating for previous vessels. This report describes the explosive qualification tests that were performed in the vessel as part of the process for qualifying the vessel for explosive use. The tests consisted of a 11.25 pound TNT equivalent bare charge detonation followed by a 9 pound TNT equivalent detonation.

36 MATERIALS SCIENCE↗

New York State 2009 NHTS Comparison Report

The U.S. Department of Transportation (USDOT) initiated an effort in 1969 to collect detailed data on personal travel, with the most recent surveys being the 1995 Nationwide Personal Transportation Survey (NPTS) and the 2001 and 2009 National Household Travel Surveys (NHTS). The primary objective of these surveys is to collect trip-based data on the nature and characteristics of personal travel so that the relationships between the characteristics of personal travel and the socio-economic and demographic characteristics of the traveler and his/her household can be established. In addition to the number of sample households that the national NPTS/NHTS survey allotted to New York State, NYDOT procured an additional sample of households in the 1995, 2001, and 2009 surveys. The comparisons drawn in this report compare the results from these NYS sampled households to the results from households drawn for the rest of the nation. Many of the differences between NYC counties and others in the state result from the striking differences in private vehicle ownership levels, with less than one in two NYC drivers and only 64% of NYC households owning a vehicle in 2009: versus 9 out of 10 drivers owning a vehicle, and between 1.5 and 2 vehicles owned per household, on the average, in the state's other metro areas. And this situation has changed very little over the past fourteen years covered by the three latest NPTS/NHTS surveys. While households in metro areas outside NYC do not own a vehicle largely due to income constraints, many households in NYC/Manhattan do not own a vehicle by choice. However, the statistics suggest that the mobility of zero-vehicle households in NYC/Manhattan is by no means deterred by the lack of a vehicle. While the private vehicle tripmaking rate of NYC residents was between one half and one third that in the state's other metro areas, and their daily VMT about half that of other metro areas, most of their daily travel needs were met by walking or by public transit. As a result, their daily trip-making rates remain consistent with those of vehicle-owning households when all modes of travel are considered. This again indicates that owning a vehicle or being a driver in NYC was less important for meeting a household's mobility needs than anywhere else in NYS. The high levels of public transit usage within NYC replace a great deal of automobile use, and this plus greater use of walk trips results in significantly lower travel generated carbon dioxide emissions per household in NYC than elsewhere in the state. In contrast, the comparatively limited level of public transit ridership in the state's smaller and medium sized metro areas places a much greater reliance on the privately owned vehicle, be it an automobile or the increasingly popular SUV.

99 GENERAL AND MISCELLANEOUS↗

Mill Seat Landfill Bioreactor Renewable Green Power (NY)

The project was implemented at the Mill Seat landfill located in the Town of Bergen, Monroe County, New York. The landfill was previously equipped with a landfill gas collection system to collect methane gas produced by the bioreactor landfill and transport it to a central location for end use. A landfill gas to energy facility was also previously constructed at the site, which utilized generator engines, designed to be powered with landfill methane gas, to produce electricity, to be utilized on site and to be sold to the utility grid. The landfill gas generation rate at the site had exceeded the capacity of the existing generators, and the excess landfill gas was therefore being burned at a candlestick flare for destruction. The funded project consisted of the procurement and installation of two (2) additional 800 KW Caterpillar 3516 generator engines, generator sets, switchgear and ancillary equipment.

09 BIOMASS FUELS↗

Biowaste to Bioenergy Center - Part 1/5 (DOE SUNY Cobleskill Final Report)

This research evaluated a rotary kiln gasification system utilizing agricultural wastes to generate syn gas. The goal of the project was to develop an efficient methodology for harnessing energy from agricultural waste. Objectives included: installation and cold testing of the gasification system; hot testing the gasification system with two agricultural wastes; development of an operations plan, including a data procurement and analysis plan; development of a predictive model and validation of the model; developing process improvement recommendations; and construction of two deployment pathway models (e.g., institutional and farm).

09 BIOMASS FUELS↗

Biowaste to Bioenergy Center - Part 2/5 (DOE SUNY Cobleskill Final Report)

This research evaluated a rotary kiln gasification system utilizing agricultural wastes to generate syn gas. The goal of the project was to develop an efficient methodology for harnessing energy from agricultural waste. Objectives included: installation and cold testing of the gasification system; hot testing the gasification system with two agricultural wastes; development of an operations plan, including a data procurement and analysis plan; development of a predictive model and validation of the model; developing process improvement recommendations; and construction of two deployment pathway models (e.g., institutional and farm).

09 BIOMASS FUELS↗

Biowaste to Bioenergy Center - Part 3/5 (DOE SUNY Cobleskill Final Report)

This research evaluated a rotary kiln gasification system utilizing agricultural wastes to generate syn gas. The goal of the project was to develop an efficient methodology for harnessing energy from agricultural waste. Objectives included: installation and cold testing of the gasification system; hot testing the gasification system with two agricultural wastes; development of an operations plan, including a data procurement and analysis plan; development of a predictive model and validation of the model; developing process improvement recommendations; and construction of two deployment pathway models (e.g., institutional and farm).

01 COAL, LIGNITE, AND PEAT↗

Biowaste to Bioenergy Center - Part 4/5 (DOE SUNY Cobleskill Final Report)

This research evaluated a rotary kiln gasification system utilizing agricultural wastes to generate syn gas. The goal of the project was to develop an efficient methodology for harnessing energy from agricultural waste. Objectives included: installation and cold testing of the gasification system; hot testing the gasification system with two agricultural wastes; development of an operations plan, including a data procurement and analysis plan; development of a predictive model and validation of the model; developing process improvement recommendations; and construction of two deployment pathway models (e.g., institutional and farm).

09 BIOMASS FUELS↗

Biowaste to Bioenergy Center - Part 5/5 (DOE SUNY Cobleskill Final Report)

This research evaluated a rotary kiln gasification system utilizing agricultural wastes to generate syn gas. The goal of the project was to develop an efficient methodology for harnessing energy from agricultural waste. Objectives included: installation and cold testing of the gasification system; hot testing the gasification system with two agricultural wastes; development of an operations plan, including a data procurement and analysis plan; development of a predictive model and validation of the model; developing process improvement recommendations; and construction of two deployment pathway models (e.g., institutional and farm).

09 BIOMASS FUELS↗

Improved Ion Resistance for III-V Photocathodes in High Current Guns

The two photocathode test systems were modified, baked and recommissioned. The first system was dedicated to ion studies and the second to electron stimulated recovery (ESR) work. The demonstration system for the electron beam rejuvenation was set up, tested and demonstrated to one of the SSRL team (Dr. Kirby) during a site visit. The requisite subsystems were transferred to SSRL, installed and photoemission studies conducted on activated surfaces following electron beam exposure. Little surface chemistry change was detected in the photoemission spectra following the ESR process. The yield mapping system for the ion (and later, the electron beam rejuvenation) studies was implemented and use made routine. Ion species and flux measurements were performed for H, He, Ne, Ar, Kr and Xe ions at energies of 0.5, 1.0 and 2.0 kV. Gas induced photoyield measurements followed each ion exposure measurement. These data permit the extraction of photoyield induced change per ion (by species) at the measured energies. Electron beam induced rejuvenation was first demonstrated in the second chamber with primary electron beam energy and dependency investigations following. A Hiden quadrupole mass spectrometer for the electron stimulated desorption (ESD) measurements was procured. The UHV test systems needed for subsequent measurements were configured, baked, commissioned and utilized for their intended purposes. Measurements characterizing the desorption products from the ESD process and secondary electron (SE) yield at the surfaces of negative electron affinity GaAs photocathodes have been performed. One US Utility Patent was granted covering the ESR process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance Comparison of Luna and Typhoon

Luna is LANL’s latest TLCC2 capacity cluster, and initial reports from users have been extremely positive. In particular, users see Luna as enabling them to be more productive than they are on Typhoon, a previous large, capacity cluster. This report investigates the reasons why Luna outperforms Typhoon on LANL applications, as this information can help ensure that future TLCC procurements emphasize the features that most benefit our users.

Mathematics & Computing(97)↗

Project report: a survey of operating reserve markets in U.S. ISO/RTO-managed electric energy regions

This survey was undertaken as part of the initial phase of a larger market design project. The goal of the project is to design a wholesale electric power market such that electric energy storage (EES) resources are permitted to participate and receive compensation that is commensurate with the benefits they provide to the grid. This survey compares and contrasts operating reserve markets in the seven U.S. ISO/RTO-managed electric energy regions. The reserve market categories employed in each energy region are placed into a common frame work. The terminology used for reserve markets in each region, as well as the characteristics of these markets, is discussed. Finally, the market procedures currently in place in the seven energy regions for the procurement, settlement, and allocation of costs for reserves are examined.

Ellison, James F.↗

NASA COR

This report fulfills the NASA statement of work, (request number NNL10AA061) as amended by Lorie R. Grimes-Ledesma via a post-visit e-mail dated July 13, 2012. The statement of work and subsequent e-mail are included in this report, which includes: • Parts list spreadsheet for load frames by account code. • Available information regarding procurement of elevated temperature ovens. • Grip and strand information. • Copy of the presentation made at Cobham, (December 2010). • Review comments to strand and grip installation procedure as provided by NASA. The shipping plan and shipment determinations were developed and shared with Lorie R. Grimes-Ledesma shortly after receiving her e-mail, July 13, 2012.

36 MATERIALS SCIENCE↗

REPORT FOR COMMERCIAL GRADE NICKEL CHARACTERIZATION AND BENCHMARKING

Oak Ridge Associated Universities (ORAU), under the Oak Ridge Institute for Science and Education (ORISE) contract, has completed the collection, sample analysis, and review of analytical results to benchmark the concentrations of gross alpha-emitting radionuclides, gross beta-emitting radionuclides, and technetium-99 in commercial grade nickel. This report presents methods, change management, observations, and statistical analysis of materials procured from sellers representing nine countries on four continents. The data suggest there is a low probability of detecting alpha- and beta-emitting radionuclides in commercial nickel. Technetium-99 was not detected in any samples, thus suggesting it is not present in commercial nickel.

36 MATERIALS SCIENCE↗

Report on Sustainability Program Peer Reviews at NNSA Laboratories

In FY 2012 peer reviews were conducted at three of the National Nuclear Security Administration (NNSA) Laboratories on the implementation of sustainability programs to achieve the DOE Strategic Sustainability Performance Plan goals. The three Laboratories selected include Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratory (SNL). These reviews were initiated by the LANS/LLNS Board of Governors Business & Operations Committee and were joined by Sandia National Laboratories to get a broad understanding of the challenges and successes experienced at the three Labs. Each review used a common approach and process for inquiry. The peer review process provided a beneficial benchmarking opportunity for each of the Laboratories. The purpose of this report summary is to bring together the mutual challenges faced across the three NNSA national labs to deepen the conversations between the sites and NNSA as the customer to work constructively toward achieving progress on the sustainability goals. The team identified many noteworthy practices and common challenges faced at each of the three sites. At each site the review team also saw a strong connection between the Environmental Management System (EMS) and the implementation of the site’s sustainability program. One common challenge was that in spite of the linkage to the EMS program the implementation efforts to achieve the sustainability goals were perceived as being the sole responsibility of the facilities and infrastructure management organizations vice an expectation for strong employee engagement. Another common challenge was perceived within the procurement organizations and demonstrated effort toward meeting the sustainable acquisition requirements throughout the organization and the various contract instruments used at each site.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Integral and Separate Effects Tests for Thermal Hydraulics Code Validation for Liquid-Salt Cooled Nuclear Reactors

The objective of the 3-year project was to collect integral effects test (IET) data to validate the RELAP5-3D code and other thermal hydraulics codes for use in predicting the transient thermal hydraulics response of liquid salt cooled reactor systems, including integral transient response for forced and natural circulation operation. The reference system for the project is a modular, 900-MWth Pebble Bed Advanced High Temperature Reactor (PB-AHTR), a specific type of Fluoride salt-cooled High temperature Reactor (FHR). Two experimental facilities were developed for thermal-hydraulic integral effects tests (IETs) and separate effects tests (SETs). The facilities use simulant fluids for the liquid fluoride salts, with very little distortion to the heat transfer and fluid dynamics behavior. The CIET Test Bay facility was designed, built, and operated. IET data for steady state and transient natural circulation was collected. SET data for convective heat transfer in pebble beds and straight channel geometries was collected. The facility continues to be operational and will be used for future experiments, and for component development. The CIET 2 facility is larger in scope, and its construction and operation has a longer timeline than the duration of this grant. The design for the CIET 2 facility has drawn heavily on the experience and data collected on the CIET Test Bay, and it was completed in parallel with operation of the CIET Test Bay. CIET 2 will demonstrate start-up and shut-down transients and control logic, in addition to LOFC and LOHS transients, and buoyant shut down rod operation during transients. Design of the CIET 2 Facility is complete, and engineering drawings have been submitted to an external vendor for outsourced quality controlled construction. CIET 2 construction and operation continue under another NEUP grant. IET data from both CIET facilities is to be used for validation of system codes used for FHR modeling, such as RELAP5-3D. A set of numerical models were developed in parallel to the experimental work. RELAP5-3D models were developed for the salt-cooled PB-AHTR, and for the simulat fluid CIET natural circulation experimental loop. These models are to be validated by the data collected from CIET. COMSOL finite element models were used to predict the temperature and fluid flow distribution in the annular pebble bed core; they were instrumental for design of SETs, and they can be used for code-to-code comparisons with RELAP5-3D. A number of other small SETs, and numerical models were constructed, as needed, in support of this work. The experiments were designed, constructed and performed to meet CAES quality assurance requirements for test planning, implementation, and documentation; equipment calibration and documentation, procurement document control; training and personnel qualification; analysis/modeling software verification and validation; data acquisition/collection and analysis; and peer review.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Impact Of The MCU Life Extension Solvent On Sludge Batch 8 Projected Operating Windows

As a part of the Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) Life Extension Project, a next generation solvent (NGS) and a new strip acid will be deployed. The strip acid will be changed from dilute nitric acid to dilute boric acid (0.01 M). Because of these changes, experimental testing or evaluations with the next generation solvent are required to determine the impact of these changes (if any) to Chemical Process Cell (CPC) activities, glass formulation strategies, and melter operations at the Defense Waste Processing Facility (DWPF). The introduction of the dilute (0.01 M) boric acid stream into the DWPF flowsheet has a potential impact on glass formulation and frit development efforts since B 2 O 3 is a major oxide in frits developed for DWPF. Prior knowledge of this stream can be accounted for during frit development efforts but that was not the case for Sludge Batch 8 (SB8). Frit 803 has already been recommended and procured for SB8 processing; altering the frit to account for the incoming boron from the strip effluent (SE) is not an option for SB8. Therefore, the operational robustness of Frit 803 to the introduction of SE including its compositional tolerances (i.e., up to 0.0125M boric acid) is of interest and was the focus of this study. The primary question to be addressed in the current study was: What is the impact (if any) on the projected operating windows for the Frit 803 - SB8 flowsheet to additions of B 2 O 3 from the SE in the Sludge Receipt and Adjustment Tank (SRAT)? More specifically, will Frit 803 be robust to the potential compositional changes occurring in the SRAT due to sludge variation, varying additions of ARP and/or the introduction of SE by providing access to waste loadings (WLs) of interest to DWPF? The Measurement Acceptability Region (MAR) results indicate there is very little, if any, impact on the projected operating windows for the Frit 803 - SB8 system regardless of the presence or absence of ARP and SE (up to 2 wt% B 2 O 3 contained in the SRAT and up to 2000 gallons of ARP). It should be noted that 0.95 wt% B 2 O 3 is the nominal projected concentration in the SRAT based on a 0.0125M boric acid flowsheet with 70,000 liters of SE being added to the SRAT.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗