Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Synthesis and characterization of antiperovskite nitrides GaNCr{sub 3−x}Mn{sub x}

The effects of Mn-doping on the crystal structure, magnetic and electrical/thermal transport properties of GaNCr{sub 3−x}Mn{sub x} (0≤x≤1.5) have been investigated systematically. As a result, the lattice constant and the residual resistivity increase, while the residual resistivity ratio, electron thermal conductivity, and room-temperature carrier concentration decrease with increasing Mn-doping level. The ground state of parent compound GaNCr{sub 3} is nonmagnetic, interestingly, the ferrimagnetism and antiferromagnetism are observed in Mn-doped samples GaNCr{sub 3−x}Mn{sub x}. Correspondingly, around the antiferromagnetic transition of GaNCr{sub 3−x}Mn{sub x} the correlation effect is studied. Furthermore, the analysis of thermal conductivity data suggests that the electron thermal conductivity plays a major role in total thermal conductivity of GaNCr{sub 3} at low temperatures, while the phonon thermal conductivity is dominant for Mn-doped GaNCr{sub 3} in the whole temperature of 5–330 K. The positive values of Seebeck coefficient and Hall coefficient indicate that the nature of charge carrier is hole-type in GaNCr{sub 3−x}Mn{sub x}. - Graphical abstract: The Rietveld refinement and structural properties of GaNCr{sub 3−x}Mn{sub x}. Display Omitted - Highlights: • Polycrystalline GaNCr{sub 3−x}Mn{sub x} are synthesized by using the solid state reaction method. • A good quality of samples is verified by Rietveld refinement and RRR values. • Antiferromagnetic and ferromagnetic competitions are induced by Mn-doping. • We present a comprehensive understanding of physical properties of GaNCr{sub 3−x}Mn{sub x}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optical and femtosecond third-order nonlinear optical properties of LiNbO{sub 3} thin films

Highlights: • Fs third order NLO properties of LiNbO{sub 3} thin films were investigated. • Al:ZnO was used as a buffer layer to control the growth of LiNbO{sub 3}. • The magnitude of the χ{sup (3)} of all films was ∼10{sup −11} e.s.u. • χ{sup (3)} obtained here is much higher that of single crystal Z-cut LiNbO{sub 3}. - Abstract: LiNbO{sub 3} thin films were deposited by means of Al:ZnO as intermediate layer using pulsed laser deposition and their structural, linear and nonlinear optical (NLO) properties were investigated. The films were found to be polycrystalline, (110) orientation for Al:ZnO/fused silica and (300) orientation for Al:ZnO/quartz substrates. The films demonstrated a transparency of >80% in the visible and near-infrared region. The NLO studies were performed with the Z-scan technique using ∼150 fs, 80 MHz pulses at 800 nm. The studies revealed that the polycrystalline LiNbO{sub 3}films and (300) LiNbO{sub 3}films demonstrated reverse saturable absorption while a transition to saturable absorption was observed in the case of (110) LiNbO{sub 3}. The presence of two-photon absorption is attributed to the indirect transition via intermediate defect levels which is related to the structural asymmetry. The large nonlinearity in refractive index could be a result of the strain induced ferroelectric polarization. The magnitude of the third order optical nonlinearity of all films was ∼10{sup −11} e.s.u. which is orders of magnitude higher than the value obtained for single crystal Z-cut LiNbO{sub 3}.

36 MATERIALS SCIENCE↗

Crystal Structure, Magnetic and Electrical Properties of Half-Doped Chromium Manganite La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3}

Polycrystalline sample La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3} (LSMCO) was prepared by a conventional solid-state reaction method in the air, and its structure was determined by Rietveld refinement using consistent resolution time-of-flight X-ray diffraction. Different structural models have been used for analysis of X-ray diffraction data recorded at room temperature, but the best fits have been found using a mixture of rhombohedral and an orthorhombic structural phases (42(1)%/57(1)%). The rhombohedral, centro-symmetric space group R 3-bar c(No.167,a≈√2a{sub p},c≈2√3a{sub p},Z=6) with octahedral tilting scheme a{sup −}a{sup −}a{sup −} leading to a three identical out-of-phase tilt angle of (Mn/Cr)-O{sub 6} octahedron along three perovskite main directions: x, y, and z-axes. The orthorhombic space group Pbnm(No.62,a≈b≈√2a{sub p},c≈2a{sub p},Z=4) with octahedral tilting scheme a{sup −}a{sup −}c{sup +}, leads to an anti-phase tilts of the same magnitude about [100] and [010] directions of the elementary specimen cell and in-phase tilt of different magnitude about the [001] direction. At low temperature 10 K, Rietveld refinement of powder diffraction data revealed that the crystal structure of sample is distorted with a single orthorhombic symmetry (space group Pbnm). Magnetic measurements indicate that our investigated sample exhibits an overall anti-ferromagnetic behavior mainly attributed to the frustration induced by both competing AFM Cr{sup 3+}-O-Cr{sup 3+}, Mn{sup 4+}-O-Mn{sup 4+} networks, and the mixed one Mn{sup 4+}-O-Cr{sup 3+}exchange magnetic interactions. The temperature dependence of the resistivity measured under zero field shows a semi-conducting behavior in the whole temperature range, which probably could be described by the adiabatic small polaron hoping model with relatively high polaron activation energy.

36 MATERIALS SCIENCE↗

Stress induced enhanced polarization in multilayer BiFeO{sub 3}/BaTiO{sub 3} structure with improved energy storage properties

Present work reports the fabrication of a multilayer (5-layer) structure of BiFeO{sub 3}(BFO)/BaTiO{sub 3}(BTO) using spin-coating technique. The crystallographic structure, surface morphology and ferroelectric behavior of multilayer structure in metal-ferroelectric-metal capacitor have been studied. Le-Bail refinement of X-ray diffraction data revealed the formation of polycrystalline pure perovskite phase with induced stress. The values of remnant (P{sub r}) and saturation polarization (P{sub s}) for BFO/BTO multilayer structure are found to be 38.14 μC/cm{sup 2} and 71.54 μC/cm{sup 2} respectively, which are much higher than the corresponding values reported for bare BFO thin film. A large value of dielectric constant of 187 has been obtained for multilayer structure with a low leakage current density of 1.09 × 10{sup −7} A/cm{sup 2} at applied bias of 10 V. The BFO/BTO multilayer structure favors the enhanced energy storage capacity as compared to bare BFO thin film with improved values of energy-density and charge-discharge efficiency as 121 mJ/cm{sup 3} and 59% respectively, suggesting futuristic energy storage applications.

36 MATERIALS SCIENCE↗

Grain boundary engineering for structure materials of nuclear reactors

Grain boundary engineering (GBE), primarily implemented by thermomechanical processing, is an effective and economical method of enhancing the properties of polycrystalline materials. Among the factors affecting grain boundary character distribution, literature data showed definitive effect of grain size and texture. GBE is more effective for austenitic stainless steels and Ni-base alloys compared to other structural materials of nuclear reactors, such as refractory metals, ferritic and ferritic–martensitic steels, and Zr alloys. Furthermore, GBE has shown beneficial effects on improving the strength, creep strength, and resistance to stress corrosion cracking and oxidation of austenitic stainless steels and Ni-base alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantifying the mechanical effects of He, W and He + W ion irradiation on tungsten with spherical nanoindentation

Here, recent advances in spherical nanoindentation protocols have proven very useful for capturing the grain-scale mechanical response of different metals. This is achieved by converting the load–displacement response into an effective indentation stress–strain response which reveals latent information such as the elastic–plastic transition or indentation yield strength and work-hardening behavior and subsequently correlating the response with the material structure (e.g., crystal orientation) at the indentation site. Using these protocols, we systematically study and quantify the microscale mechanical effects of He, W, and He + W ion irradiation on commercially pure, polycrystalline tungsten. The indentation stress–strain response is correlated with the crystal orientation from electron backscatter diffraction, the defect structure from transmission electron microscopy micrographs, and the stopping range of ions in matter calculations of displacement damage and He concentration. He-implanted grains show a much higher indentation yield strength and saturation stress compared to W-ion-irradiated grains for the same displacement damage. There is also good agreement between the dispersed barrier hardening model with a barrier strength of 0.5–0.8 and void models (Bacon–Kochs–Scattergood and Osetsky–Bacon models) with the experimentally observed changes in indentation strength due to the presence of He bubbles. This finding indicates that a high density (~ 9 × 10 23 m –3 ) and concentration (~ 1.5 at.%) of small (~ 1 nm diameter) He bubbles can be moderate to strong barriers to dislocation slip in tungsten.

36 MATERIALS SCIENCE↗

Intermediate structural phases in rare-earth substituted BiFeO{sub 3}

The room-temperature crystal structure and local ferroelectric properties of Bi{sub 0.85}RE{sub 0.15}FeO{sub 3} (RE = Sm, Gd, Dy) polycrystalline samples have been investigated by X-ray diffraction (XRD) and piezoresponse force microscopy (PFM) techniques. XRD measurements show that the rare-earth substitution causes the transformation of R3c structure typical of BiFeO{sub 3} to yield orthorhombic phases with {radical}2a x 2{radical}2a x 2a and {radical}2a x 2a x {radical}2a superlattices (a is the parameter of the cubic perovskite subcell). Results of PFM investigations imply that both the orthorhombic phases are polar. The models describing crystal structure of the phases are discussed.

36 MATERIALS SCIENCE↗

Phase transitions in LaFeAsO: structural, magnetic, elastic, and transport properties, heat capacity and Mossbauer spectra

We present results from a detailed experimental investigation of LaFeAsO, the parent material in the series of ``FeAs'' based oxypnictide superconductors. Upon cooling this material undergoes a tetragonal-orthorhombic crystallographic phase transition at ~160 K followed closely by an antiferromagnetic ordering near 145 K. Analysis of these phase transitions using temperature dependent powder X-ray and neutron diffraction measurements is presented. A magnetic moment of ~0.35 Bohr magneton per iron is derived from Mossbauer spectra in the low temperature phase. Evidence of the structural transition is observed at temperatures well above the structural transition (up to near 200 K) in the diffraction data as well as the polycrystalline elastic moduli probed by resonant ultrasound spectroscopy measurements. The effects of the two phase transitions on the transport properties (resistivity, thermal conductivity, Seebeck coefficient, Hall coefficient), heat capacity, and magnetization of LaFeAsO are also reported, including an order of magnitude drop in the inferred carrier concentration below 160 K. The results suggest that the structural distortion leads to a localization of carriers on Fe, producing small local magnetic moments which subsequently order antiferromagnetically upon further cooling. Evidence of strong electron-phonon interactions in the high-temperature tetragonal phase is also observed.

McGuire, Michael A↗

Optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As determined by variable-angle spectroscopic ellipsometry

The optical constants of single-crystal Al x Ga 1-x P and Al x Ga 1-x As have been widely studied at various Al compositions but have not yet been thoroughly investigated as polycrystalline materials. Using variable-angle spectroscopic ellipsometry, we estimate and analyze the optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As that were non-epitaxially deposited at deposition temperatures of either 250 or 420 °C, and with various dopant species, dopant concentrations, and V/III flux ratios. Here, for wavelengths of 350–400 nm, decreasing the V/III ratio increases the refractive index of Be-doped polycrystalline Al 0.25 Ga 0.75 P. For wavelengths >500 nm, as the targeted Be dopant concentration increases for polycrystalline Al 0.25 Ga 0.75 P, the amount the extinction coefficient increases and the indirect bandgap decreases depends on the V/III ratio. Furthermore, Si-doped polycrystalline Al 0.25 Ga 0.75 P has significantly smaller extinction coefficient values than when it is Be-doped, for the same V/III ratio and targeted doping concentration, at wavelengths >500 nm. Based on our findings, we hypothesize that the dopant species, dopant concentration, and the V/III ratio dictate various types of defect concentrations, which then affect the optical constants and indirect bandgap of polycrystalline Al 0.25 Ga 0.75 P. Additionally, for wavelengths >500 nm, we find that polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As have the lowest extinction coefficient values when deposited at 420 °C, as opposed to 250 °C. Thus, we hypothesize that the deposition temperature is the most significant factor in dictating the optical constants of these polycrystalline III-Vs. Ultimately, this work demonstrates alternative methods to tune the optical constants of polycrystalline Al 0.25 Ga 0.75 P and Al 0.9 Ga 0.1 As, as opposed to tuning the Al composition.

42 ENGINEERING↗

Structural chemistry and magnetic properties of the perovskite Sr{sub 3}Fe{sub 2}TeO{sub 9}

A polycrystalline sample of perovskite-like Sr{sub 3}Fe{sub 2}TeO{sub 9} has been prepared in a solid-state reaction and studied by a combination of electron microscopy, Mössbauer spectroscopy, magnetometry, X-ray diffraction and neutron diffraction. The majority of the reaction product is shown to be a trigonal phase with a 2:1 ordered arrangement of Fe{sup 3+} and Te{sup 6+} cations. However, the sample is prone to nano-twinning and tetragonal domains with a different pattern of cation ordering exist within many crystallites. Antiferromagnetic ordering exists in the trigonal phase at 300 K and Sr{sub 3}Fe{sub 2}TeO{sub 9} is thus the first example of a perovskite with 2:1 trigonal cation ordering to show long-range magnetic order. At 300 K the antiferromagnetic phase coexists with two paramagnetic phases which show spin-glass behaviour below ~80 K. - Graphical abstract: Sr{sub 3}Fe{sub 2}TeO{sub 9} has a 2:1 ordered arrangement of Fe{sup 3+} and Te{sup 6+} cations over the octahedral sites of a perovskite structure and is antiferromagnetic at room temperature. - Highlights: • 2:1 Cation ordering in a trigonal perovskite. • Magnetically ordered trigonal perovskite. • Intergrowth of nanodomains in perovskite microstructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and charge transport properties of Yb{sub 5}Al{sub 2}Sb{sub 6} : a Zintl phase with incomplete electron transfer.

We report the synthesis, structure, spectroscopic properties, charge and thermal transport, and electronic structure of a new member of the Zintl family, Yb{sub 5}Al{sub 2}Sb{sub 6}. The compound crystallizes in the Ba{sub 5}Al{sub 2}Bi{sub 6} structure type and requires the addition of Ge or Si in the synthesis, which appears to act as a catalyst. Yb{sub 5}Al{sub 2}Sb{sub 6} has an anisotropic structure with infinite anionic double chains cross-linked by Yb{sup 2+} ions. Polycrystalline ingots of Yb{sub 5}Al{sub 2}Sb{sub 6} prepared in the presence of 0.5 mol equiv of Ge showed room-temperature conductivity, thermopower, and thermal conductivity of {approx}1100 S/cm, {approx}20 {mu}V/K, and {approx}3.8 W/m {center_dot} K, respectively. Investigations of other solid solutions of Yb{sub 5}Al{sub 2}Sb{sub 6}, doping effects, and chemical modifications are discussed. Sr only partially replaces Yb in the structure leading to Sr{sub 0.85}Yb{sub 4.15}Al{sub 2}Sb{sub 6}. Electronic structure calculations performed using a highly precise full-potential linearized augmented plane wave method within the density functional theory scheme show the presence of a negative band gap and suggest incomplete electron transfer and a metallic character to the compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multilayered vacuum-arc nanocomposite TiN/ZrN coatings before and after annealing: Structure, properties, first-principles calculations

Highlights: • Multilayer TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in nitrogen atmosphere; • Several samples were annealed in air at the temperature 700 °C; • First-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out; • All deposited samples were highly polycrystalline with quite large 20–25 nm crystals; • The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively; • Deposited coatings demonstrate good wear and oxidation resistance; - Abstract: Nanoscale multilayered TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in a nitrogen atmosphere. Studies of film's properties were carried out using various modern methods of analysis, such as XRD, STEM, HRTEM, SIMS combined with results of nanoindentation and tribological tests. To interpret the mechanical properties of the deposited multilayer films first-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out. To study the influence of thermal annealing, several samples were annealed in air at the temperature 700 °C. All deposited samples were highly polycrystalline with quite large 20–25 nm crystals. The crystalline planes were very ordinated and demonstrated an excellent coordinated growth. The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively. Annealing in air at the temperature 700 °C led to partial oxidation of the multilayered coatings, however hardness of the non-oxidized part of the coatings remained as high, as for initial coatings. All deposited coatings demonstrate good wear resistance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Revealing Surface Modifications of Potassium-Fluoride-Treated Cu(In,Ga)Se 2 : A Study of Material Structure, Chemistry, and Photovoltaic Performance

The effects of alkali post-deposition treatments and device properties for polycrystalline thin film Cu(In,Ga)Se2 have been investigated. It is reported that these surface treatments lead to differences in interface chemistry and device properties. The behavior of defects in the space charge region as a function of different growth parameters is investigated by correlative analytical microscopy. The latter combines electron microscopy based imaging, Kelvin probe force microscopy, and atom probe tomography. Alkali treatments lead to copper depletion and consequent sharpening of the compositional profiles, and the measured electric potential differences of exposed Cu(In1-x,Gax)Se2 surfaces. Measurable differences in resistivity and potential have also been observed, which are expected to relate to the improved open-circuit voltage, fill-factor, and device efficiency. This study frames one perspective as to why post-deposition alkaline treatments lead to copper depletion, a mildly n-type semiconductor interface, and higher efficiency for a Cu(In,Ga)Se2 thin-film photovoltaic device.

14 SOLAR ENERGY↗

Structural chemistry and magnetic properties of Pr{sub 3-x}Sr{sub 1+x}CrNiO{sub 8}

Polycrystalline samples of the n=1 Ruddlesden-Popper system Pr{sub 3-x}Sr{sub 1+x}CrNiO{sub 8} have been synthesized over the composition range 0.0<x{<=}1.0 either by the ceramic method or from solution. They have been characterized by an appropriate combination of diffraction methods (X-ray, neutron and electron) and magnetometry (d.c. and a.c.). All compositions having x>0.1 adopt the tetragonal space group I4/mmm; Pr{sub 2.9}Sr{sub 1.1}CrNiO{sub 8} adopts the orthorhombic space group Fmmm. There is no evidence of Cr/Ni cation ordering in any composition. A maximum in the zero-field cooled magnetic susceptibility is observed at a temperature T{sub f} that decreases with increasing Sr content; 52{<=}T{sub f} (K){<=}13. The frequency dependence of T{sub f} observed in a.c. susceptibility measurements, together with the analysis of neutron diffraction data, suggests that the atomic magnetic moments in these compositions adopt a spin-glass-like state below T{sub f}. - Graphical abstract: The n=1 Ruddlesden-Popper system Pr{sub 3-x}Sr{sub 1+x}CrNiO{sub 8} (0.0<x{<=}1.0) has been characterized by diffraction methods and magnetometry. There is no evidence of Cr/Ni cation ordering in any composition. The atomic magnetic moments adopt a spin-glass-like state below a transition temperature that decreases from 52 K (x=0.1) to 13 K (x=1.0)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, magnetism, specific heat, and dielectric properties of Eu{sub 2}Ta{sub 2}O{sub 7}

Polycrystalline Eu{sub 2}Ta{sub 2}O{sub 7} containing layered perovskite slabs was prepared and analyzed. Eu{sub 2}Ta{sub 2}O{sub 7} crystallizes in the orthorhombic centrosymmetric Cmcm space group (with unit cell: a = 3.95156(9), b = 27.0775(6), and c = 5.68279(13) Å) isomorphous with high-temperature Sr{sub 2}Ta{sub 2}O{sub 7}. Dielectric measurements reveal that, in contrast to Sr{sub 2}Ta{sub 2}O{sub 7} which is ferroelectric below 166 K, Eu{sub 2}Ta{sub 2}O{sub 7} remains paraelectric down to at least 0.45 K and shows no magneto-dielectric coupling. Magnetic data in the 2–400 K range indicate an antiferromagnetic phase transition with a sharp susceptibility peak at 2.71(5) K. Further analysis using specific heat measurements reveals that the second magnetic phase transition occurs at 1.10(5) K and dominates the spin entropy of the Eu{sup 2+} 4f{sup 7} ions. The possible origin of the two successive magnetic phase transitions in Eu{sub 2}Ta{sub 2}O{sub 7} requires further studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic order in single crystals of Na 3 Co 2 SbO 6 with a honeycomb arrangement of 3d 7 Co 2+ ions

We have synthesized single crystals of Na 3 Co 2 SbO 6 and characterized the structure and magnetic order by measuring anisotropic magnetic properties, heat capacity, and x-ray and neutron single crystal diffraction. Magnetic properties and specific heat of polycrystalline Na 3 Co 2 SbO 6 were also measured for comparison. Na 3 Co 2 SbO 6 crystallizes in a monoclinic structure (space group C 2 / m ) with [Co 2 SbO 6 ] 3- layers separated by Na + ions. The temperature dependence of magnetic susceptibility shows significant anisotropic behavior in the whole temperature range 2–350 K investigated in this work. An effective moment of about 5.5μ B /Co 2+ from a Curie-Weiss fitting of the magnetic susceptibility is larger than the spin only value and signals significant orbital contribution. Na 3 Co 2 SbO 6 single crystal undergoes a transition into a long-range antiferromagnetically ordered state below T N = 5K. Neutron single crystal diffraction confirmed the zigzag magnetic structure with a propagation vector k = (0.5,0.5,0). The ordered moment is found to be 0.9 μ B at 4 K and align along the crystallographic b axis. Density functional theory calculations suggest that the experimentally observed zigzag order is energetically competing with the Néel order. Furthermore, it is also found that the covalency between Co d and O p is quite strong and competes with the local spin-orbit coupling, suggesting a J eff = 1/2 ground state may not be realized in this compound.

36 MATERIALS SCIENCE↗

Structural, dielectric and magnetic studies of magnetoelectric trirutile Fe{sub 2}TeO{sub 6}

We have investigated structural, magnetic and dielectric properties of Fe{sub 2}TeO{sub 6} which is a magnetoelectric antiferromagnet with the trirutile lattice. Rietveld analysis of room temperature X-ray diffraction data shows the phase purity of the sample with tetragonal trirutile structure (space group P4{sub 2}/mnm). The DC susceptibility measurement performed on polycrystalline powders exhibits antiferromagnetic ordering below transition temperature ~ 210K. The employment of Curie-Weiss law to inverse magnetic susceptibility only in the temperature range 350-260 K indicates the magnetic ordering starts developing before the transition temperature. The temperature dependent dielectric measurements show an intrinsic behavior of dielectric constant below 150 K while a continuous increase in dielectric constant with temperature above 150 K may be attributed to a small increase in electrical conduction, known commonly in the literatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ECCI based characterization of dislocation shear in polycrystalline arrays during heterogeneous deformation of commercially pure titanium

A new electron channeling contrast imaging (ECCI) based approach for the characterization of heterogeneous plastic deformation across multiple grains in a polycrystal is presented. The nature of the shear accommodation at grain boundaries has been assessed by evaluating the spatial distribution of dislocations and slip system activities near the boundaries and relating these observations to standard slip transfer criteria and the global state of stress. The direction of slip band propagation, and consequently the location of dislocation slip band nucleation, was determined by characterizing the slip band widths across individual grains. This assessment leads to a better understanding of the factors involved in polycrystalline deformation, including the grain boundary shear accommodation associated with both dislocation pile-ups and grain boundary dislocation nucleation. Because ECCI allows study of dislocation structures over large surface areas, and thus larger overall volumes than typically are accessible by other techniques, the overall approach allows the dislocation distribution across individual grains to be understood in terms of the broader polycrystalline constraints.

36 MATERIALS SCIENCE↗