Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Dark energy survey year 3 results: cosmology from galaxy clustering and galaxy–galaxy lensing in harmonic space

We present the joint tomographic analysis of galaxy-galaxy lensing and galaxy clustering in harmonic space (HS), using galaxy catalogues from the first three years of observations by the Dark Energy Survey (DES Y3). We utilize the redMaGiC and MagLim catalogues as lens galaxies and the metacalibration catalogue as source galaxies. The measurements of angular power spectra are performed using the pseudo-$C_\ell$ method, and our theoretical modelling follows the fiducial analyses performed by DES Y3 in configuration space, accounting for galaxy bias, intrinsic alignments, magnification bias, shear magnification bias and photometric redshift uncertainties. We explore different approaches for scale cuts based on non-linear galaxy bias and baryonic effects contamination. Our fiducial covariance matrix is computed analytically, accounting for mask geometry in the Gaussian term, and including non-Gaussian contributions and super-sample covariance terms. To validate our HS pipelines and covariance matrix, we used a suite of 1800 log-normal simulations. We also perform a series of stress tests to gauge the robustness of our HS analysis. In the $\Lambda$CDM model, the clustering amplitude $S_8 =\sigma _8(\Omega _m/0.3)^{0.5}$ is constrained to $S_8 = 0.704\pm 0.029$ and $S_8 = 0.753\pm 0.024$ (68 per cent C.L.) for the redMaGiC and MagLim catalogues, respectively. For the wCDM, the dark energy equation of state is constrained to $w = -1.28 \pm 0.29$ and $w = -1.26^{+0.34}_{-0.27}$, for redMaGiC and MagLim catalogues, respectively. These results are compatible with the corresponding DES Y3 results in configuration space and pave the way for HS analyses using the DES Y6 data.

(cosmology:) cosmological parameters↗

The ambiguous AT2022rze: changing-look AGN mimicking a supernova in a merging galaxy system

AT2022rze is a luminous, ambiguous transient located south-east of the geometric centre of its host galaxy at redshift $z = 0.08$. The host appears to be formed by a merging galaxy system. The observed characteristics of AT2022rze are reminiscent of active galactic nuclei (AGNs), tidal disruption events, and superluminous supernovae. The transient reached a peak absolute magnitude of $-$20.2 $\pm$ 0.2 mag, showing a sharp rise (t$_{\mathrm{rise,1/e}} = 27.5 \pm 0.6$ d) followed by a slow decline (t$_{\mathrm{dec,1/e}} = 382.9 \pm 0.6$). Its bumpy light curve and narrow Balmer lines indicate the presence of gas (and dust). Its light curve shows rather red colours, indicating that the transient could be affected by significant host extinction. The spectra reveal coronal lines, indicative of high-energy (X-ray/UV) emission. Archival data reveal no prior activity at this location, disfavouring a steady-state AGN, although an optical spectrum obtained prior to the transient is consistent with an AGN classification of the host. Based on this, we conclude that the transient most likely represents a changing-look AGN at the centre of the smallest component of the merging system.

galaxies: active↗

Arabidopsis myosin XIK interacts with the exocyst complex to facilitate vesicle tethering during exocytosis

Myosin motors are essential players in secretory vesicle trafficking and exocytosis in yeast and mammalian cells; however, similar roles in plants remain a matter for debate, at least for diffusely growing cells. Here, we demonstrate that Arabidopsis (Arabidopsis thaliana) myosin XIK, via its globular tail domain (GTD), participates in the vesicle tethering step of exocytosis through direct interactions with the exocyst complex. Specifically, myosin XIK GTD bound directly to several exocyst subunits in vitro and functional fluorescently tagged XIK colocalized with multiple exocyst subunits at plasma membrane (PM)-associated stationary foci. Moreover, genetic and pharmacological inhibition of myosin XI activity reduced the rate of appearance and lifetime of stationary exocyst complexes at the PM. By tracking single exocytosis events of cellulose synthase (CESA) complexes with high spatiotemporal resolution imaging and pair-wise colocalization of myosin XIK, exocyst subunits, and CESA6, we demonstrated that XIK associates with secretory vesicles earlier than exocyst and is required for the efficient localization and normal dynamic behavior of exocyst complex at the PM tethering site. This study reveals an important functional role for myosin XI in secretion and provides insights about the dynamic regulation of exocytosis in plants.

59 BASIC BIOLOGICAL SCIENCES↗

Evidence for $CP$ violation and measurement of $CP$-violating parameters in B$^0_\mathrm{s}$ $\to$ J/$\psi\,\phi$(1020) decays in pp collisions at $\sqrt{s} =$ 13 TeV

A pioneering machine-learning-based flavor-tagging algorithm combining same-side and opposite-side tagging is used to obtain the equivalent of 27$\,$000 tagged B$^0_\mathrm{s}$$\to$ J/$\psi\, \phi$(1020) decays from pp collisions at $\sqrt{s} =$ 13 TeV, collected by the CMS experiment and corresponding to an integrated luminosity of 96.5 fb$^{-1}$. A time- and flavor-dependent angular analysis of the $\mu^+\mu^-$K$^+$K$^-$ final state is used to measure parameters of the $\mathrm{B}^0_\mathrm{s}$-$\overline{\mathrm{B}}^0_\mathrm{s}$ system. The weak phase is measured to be $\phi_\mathrm{s}$ = $-$73 $\pm$ 23 (stat) $\pm$ 7 (syst) mrad, which, combined with a $\sqrt{s}$ = 8 TeV CMS result, gives $\phi_\mathrm{s}$ = $-$74 $\pm$ 23 mrad. This value differs from zero by 3.2 standard deviations, providing evidence for $CP$ violation in B$^0_\mathrm{s}$$\to$ J/$\psi\,\phi$(1020) decays. All measured physics parameters are found to agree with standard model predictions where available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Portal matter models of kinetic mixing with two light dark gauge bosons

The kinetic mixing (KM) portal mandates the existence of at least one new gauge boson, the dark photon (DP) based on the group 𝑈⁢(1) 𝐷 , which mixes with the Standard Model (SM) photon via loops of other new heavy particles carrying both SM and dark charges called portal matter (PM). Arguments exist based on the renormalization group equations running of the 𝑈⁢(1) 𝐷 gauge coupling suggesting that at higher scales 𝑈⁢(1) 𝐷 becomes part of a more complex non-Abelian group, a simple example being just the SM-like 𝐺 𝐷 =𝑆⁢𝑈⁢(2)𝐼 ×𝑈⁢(1) 𝑌 𝐼 . In our past analyses, it was always assumed that 𝐺 𝐷 broke in a SM-like manner directly to the DP’s 𝑈⁢(1) 𝐷 which then subsequently broke at low energies ≲1 GeV. However, this need not be the case, and 𝐺 𝐷 can instead break to 𝑈⁢(1) 𝑇 3⁢𝐼 ×𝑈⁢(1) 𝑌 𝐼 , with 𝑇 3⁢𝐼 being the diagonal generator of 𝑆⁢𝑈⁢(2) 𝐼 , now producing two light gauge bosons which obtain masses at the ≲1 GeV scale. In this paper, we explore the phenomenology of a very simple realization of this kind of alternative setup employing non-Abelian KM and having a minimal, leptonlike PM sector, demonstrating its distinctive nature in comparison to the previously examined symmetry breaking path. The effects of interference between these gauge bosons on thermal dark matter annihilation, the production of new heavy gauge, and Higgs and PM states at colliders, as well as the corresponding signatures for the light dark gauge bosons are examined. Collider signatures of this setup are found to be particularly challenging.

extensions of Higgs sector↗

Highly boosted dielectron identification in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A new technique is developed to identify dielectrons (e$^+$e$^-$) with Lorentz boost $γ_\mathrm{L}$$\gt$ 20 that produce one single merged cluster in the electromagnetic calorimeter of the CMS detector. The identification uses two multivariate models: one for the case where both electron tracks are reconstructed, and another where only one of the tracks is reconstructed. The efficiency is determined using proton-proton collision data collected at a center-of-mass energy of 13 TeV. Boosted J/$ψ$ mesons decaying into e$^+$e$^-$ pairs are used to estimate the efficiency of the model with two tracks, yielding an overall efficiency of 80%. The Z $\to$ $μ^+μ^-γ$ events, where the photon converts into a collimated dielectron, are used for the model with a single track, yielding an efficiency of about 60%. A dedicated energy correction for dielectron candidates is also developed using B$^\pm$ $\to$ J/$ψ$K$^\pm$ $\to$ e$^+$e$^-$K$^\pm$ data.

Hayrapetyan, A. [Yerevan Phys. Inst.]↗

Influence of hydrogenation on the vibrational density of states of magnetocaloric LaFe 11.4 Si 1.6 H 1.6

We report on the impact of magnetoelastic coupling on the magnetocaloric properties of LaFe 11.4 Si 1.6 H 1.6 in terms of the vibrational (phonon) density of states (VDOS), which we determined with 57 Fe nuclear resonant inelastic x-ray scattering (NRIXS) measurements and with density functional theory (DFT) based first-principles calculations in the ferromagnetic (FM) low-temperature and paramagnetic (PM) high-temperature phase. In experiments and calculations, we observe pronounced differences in the shape of the Fe-partial VDOS between nonhydrogenated and hydrogenated samples. Furthermore, this shows that hydrogen not only shifts the temperature of the first-order phase transition, but also affects the elastic response of the Fe subsystem significantly. In turn, the anomalous redshift of the Fe VDOS, observed by going to the low-volume PM phase, survives hydrogenation. As a consequence, the change in the Fe-specific vibrational entropy ΔS lat across the phase transition has the same sign as the magnetic and electronic contribution. DFT calculations show that the same mechanism, which is a consequence of the itinerant electron metamagnetism associated with the Fe subsystem, is effective in both the hydrogenated and the hydrogen-free compounds. Although reduced by 50% as compared to the hydrogen-free system, the measured change ΔS lat of 3.2 ± 1.9)J/ kg K across the FM-to-PM transition contributes with ~35 % significantly and cooperatively to the total isothermal entropy change ΔS iso . Hydrogenation is observed to induce an overall blueshift of the Fe VDOS with respect to the H-free compound; this effect, together with the enhanced Debye temperature observed, is a fingerprint of the hardening of the Fe sublattice by hydrogen incorporation. In addition, the mean Debye velocity of sound of LaFe 11.4 Si 1.6 H 1.6 was determined from the NRIXS and the DFT data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-trap isomers in deformed, odd-odd nuclei in the light rare-earth region near $N=98$

Masses of neutron-rich, odd-odd Pm, Eu, and Tb nuclei near N = 98 were measured using the Canadian Penning Trap mass spectrometer at the Californium Rare Isotope Breeder Upgrade (CARIBU) facility. High-resolution mass measurements yielded the discovery of spin-trap isomers at N = 97 in Tb 162 , and in the N = 99 isotones of Pm 160 and Tb 164 . Furthermore, no evidence of long-lived isomers were observed at N = 95 in Eu 158 , at N = 97 in Pm 158 , nor at N = 101 in Eu 164 and Tb 166 . Here, these experimental observations are compared to results from multiquasiparticle blocking calculations.

150 ≤ A ≤ 189↗

Constraining the baryon abundance with the kinematic Sunyaev-Zel’dovich effect: Projected-field detection using Planck , WMAP , and unWISE

The kinematic Sunyaev-Zel'dovich (kSZ) effect -- the Doppler boosting of cosmic microwave background (CMB) photons scattering off free electrons with non-zero line-of-sight velocity -- is an excellent probe of the distribution of baryons in the Universe. In this paper, we measure the kSZ effect due to ionized gas traced by infrared-selected galaxies from the \emph{unWISE} catalog. We employ the "projected-field" kSZ estimator, which does not require spectroscopic galaxy redshifts. To suppress non-kSZ foreground signals associated with the galaxies (e.g., dust emission and thermal SZ), this estimator requires cleaned CMB maps, which we obtain from \emph{Planck} and \emph{WMAP} data. Using a new "asymmetric" estimator that combines different foreground-cleaned CMB maps to maximize the signal-to-noise, we measure the kSZ$^2$-galaxy cross-power spectrum for three subsamples of the \emph{unWISE} galaxy catalog, which peak at mean redshifts $z \approx$ 0.6, 1.1, and 1.5, have average halo mass $\sim 1$-$5\times 10^{13}$ $h^{-1} M_{\odot}$, and in total contain over 500 million galaxies. After marginalizing over CMB lensing contributions, we measure the amplitude of the kSZ signal $A_{\rm kSZ^2} = 0.42 \pm 0.31$, $5.02 \pm 1.01$, and $8.23 \pm 3.23$, for the three subsamples, where $A_{\rm kSZ^2} = 1$ corresponds to our fiducial model. The combined kSZ detection S/N $>$ 5. We discuss possible explanations for the excess kSZ signal associated with the $z \approx 1.1$ sample, and show that foreground contamination in the CMB maps is very unlikely to be the cause. Our measurements illustrate clearly that no baryons are missing on large scales at low redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for the lepton-flavor violating decay of the Higgs boson and additional Higgs bosons in the e μ final state in proton-proton collisions at s = 13 TeV

A search for the lepton-flavor violating decay of the Higgs boson and potential additional Higgs bosons with a mass in the range 110-160 GeV to an e$^{\pm}\mu^{\mp}$ pair is presented. The search is performed with a proton-proton collision data set at a center-of-mass energy of 13 TeV collected by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138 fb$^{-1}$. No excess is observed for the Higgs boson. The observed (expected) upper limit on the e$^{\pm}\mu^{\mp}$ branching fraction for it is determined to be 4.4 (4.7) $\times$ 10$^{-5}$ at 95% confidence level, the most stringent limit set thus far from direct searches. The largest excess of events over the expected background in the full mass range of the search is observed at an e$^{\pm}\mu^{\mp}$ invariant mass of approximately 146 GeV with a local (global) significance of 3.8 (2.8) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anomalous Hall effect emerging from field-induced Weyl nodes in SmAlSi

The intrinsic anomalous Hall effect (AHE) has been reported in numerous ferromagnetic Weyl semimetals. However, the AHE in the antiferromagnetic (AFM) or paramagnetic (PM) state of Weyl semimetals has rarely been observed experimentally. Different mechanisms have been proposed to account for the emergence of the AHE from different types of magnetic order. Here, in this Letter, we propose a new model that explains the observed AHE in both the AFM and PM states of the noncentrosymmetric Weyl semimetal SmAlSi. The newly proposed mechanism is based on magnetic-field-induced Weyl node evolution, which qualitatively explains the temperature dependence of the anomalous Hall conductivity, which displays unconventional power-law behavior in both the AFM and PM states of SmAlSi.

Gao, Yuxiang [Rice University, Houston, TX (United↗

Design and Metamodel-Based Optimization of a High Power Density Wound Field Traction Motor

Traction motors onboard electric vehicles (EVs) are faced with ever-increasing power density requirements and cost reduction challenges. Although permanent magnet (PM) traction motors have been favored for their potential of higher power densities, the price and supply volatilities of PM materials are the major drawbacks. Instead of a single load point, the performance of a traction motor needs to be optimized over various combinations of torque and speed to represent real-world vehicular driving scenarios, which tends to be a time-consuming task with direct optimizations. In this paper, as a PM-free solution, a wound field synchronous motor (WFSM) is designed and optimized using a metamodel-based approach to maximize its efficiency over a custom set of load points, while utilizing a fully per-unitized geometry template. The workflow has proven to be timesaving and the selected design is prototyped.

33 ADVANCED PROPULSION SYSTEMS↗

An Assessment of Additively Manufactured Bonded Permanent Magnets for a Distributed Wind Generator

In this paper, we examine and compare the performance of a generator design optimized using additively manufactured NdFeB-SmFeN in nylon-polymer-bonded permanent magnets (PMs) against a generator design with conventional NdFeB sintered PMs. To realize this, a commercially available 15-kW wind generator's rotor is re-optimized using both additively manufactured and sintered NdFeB magnets using simple geometric parameterization that allowed for two specific magnet shapes, namely, arc-shaped and crown-shaped designs. Results showed that for a similar generator performance, the designs with additively manufactured bonded PMs are more cost-competitive in terms of the estimated PM material cost and also have negligible eddy current magnet losses.

additive manufacturing↗

Persistent Memory Object Storage and Indexing for Scientific Computing

This paper presents Mosiqs, a persistent memory object storage framework with metadata indexing and querying for scientific computing. We design Mosiqs based on the key idea that memory objects on shared PM pool can live beyond the application lifetime and can become the sharing currency for applications and scientists. Mosiqs provides an aggregate memory pool atop an array of persistent memory devices to store and access memory objects. Mosiqs uses a lightweight persistent memory key-value store to manage the metadata of memory objects such as persistent pointer mappings, which enables memory object sharing for effective scientific collaborations. Mosiqs is implemented atop PMDK. We evaluate the proposed approach on many-core server with an array of real PM devices. The preliminary evaluation confirms a 100% improvement for write and 30% in read performance against a PM-aware file system approach.

Khan, Awais↗

Implementation of a Metamodel-Based Optimization for the Design of a High Power Density Wound Field Traction Motor

Traction motors onboard electric vehicles (EVs) are faced with ever-increasing power density requirements and cost reduction challenges. Although permanent magnet (PM) traction motors have been favored for their potential of higher power densities, the price and supply volatility of PM materials are the major drawbacks. Instead of a single load point, the performance of a traction motor needs to be optimized over various combinations of torque and speed to represent real-world vehicular driving scenarios, which tends to be a time-consuming task with direct optimizations. In this study, as a PM-free solution, a wound field synchronous motor (WFSM) is designed and optimized using a metamodel-based approach to maximize its efficiency over a custom set of load points, while utilizing a fully per-unitized geometry template. The workflow has proven to be timesaving and the optimal design is prototyped and tested.

33 ADVANCED PROPULSION SYSTEMS↗

Indoor air quality in new and renovated low-income apartments with mechanical ventilation and natural gas cooking in California

This work presents pollutant concentrations and performance data for code-required mechanical ventilation equipment in 23 low-income apartments at 4 properties constructed or renovated 2013-2017. All apartments had natural gas cooking burners. Occupants pledged to not use windows for ventilation during the study but several did. Measured airflows of range hoods and bathroom exhaust fans were lower than product specifications. Only eight apartments operationally met all ventilation code requirements. Pollutants measured over one week in each apartment included time-resolved fine particulate matter (PM 2.5 ), nitrogen dioxide (NO 2 ), formaldehyde and carbon dioxide (CO 2 ) and time-integrated formaldehyde, NO 2 and nitrogen oxides (NO X ). Compared to a recent study of California houses with code-compliant ventilation, apartments were smaller, had fewer occupants, higher densities, and higher mechanical ventilation rates. Mean PM 2.5 , formaldehyde, NO 2 , and CO 2 were 7.7 µg/m 3 , 14.1 ppb, 18.8 ppb, and 741 ppm in apartments; these are 4% lower, 25% lower, 165% higher, and 18% higher compared to houses with similar cooking frequency. Four apartments had weekly PM 2.5 above the California annual outdoor standard of 12 µg/m 3 and also discrete days above the World Health Organization 24-h guideline of 25 µg/m 3 . Two apartments had weekly NO 2 above the California annual outdoor standard of 30 ppb.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Validation of the Porous Medium Approximation for Hydrodynamics Analysis in Compact Heat Exchangers

Compact heat exchangers (HXs) have gained attention in recent years in various fields such as solar and nuclear power generation, oil and gas, and refrigeration due to their low cost, high power density, and robustness in high-pressure and/or high-temperature environments. However, the large difference between a compact HX's overall dimensions (~m) and the much smaller scale of its channels (~mm) makes it challenging to model the entire HX at once, due to computational limitations. In this work, we treat the channeled region of a compact HX as a porous medium (PM) to circumvent the need to model/mesh each individual channel. This allows us to simulate the entire HX, including both the header and channeled regions while maintaining the computational cost at a practical level. Although the porous medium approach has been used to model heat exchangers, its validity is still questionable because (1) the resistance coefficients are heavily data-based and thus difficult to be applied to new heat exchangers and (2) the validation has been focused on matching the overall pressure drop in the channel region, which does not address whether such model can predict detailed pressure and velocity field. For the first time, this work addresses under what circumstances and with what uncertainty does the PM approach work for hydrodynamics modeling in compact HXs. By answering these questions, we introduce the PM approach as a powerful tool for HX hydrodynamics modeling that can predict not only the overall pressure drop but also the detailed pressure and velocity distributions.

Engineering↗

Simultaneous measurement of temperature and strain by cascaded fiber Bragg grating-silicon Fabry-Perot interferometer sensor

We report a fiber-optic sensor configuration with a cascaded fiber Bragg grating (FBG) and a silicon Fabry-Perot interferometer (FPI) for simultaneous measurement of temperature and strain. The sensor is composed of a 5 mm FBG on a single mode fiber and a 100μm thick silicon FPI attached to the tip of the optical fiber. The FBG is surface mounted on the host structure, and the FPI tip is suspended. Due to the stress-free, cantilever configuration, the silicon FPI is insensitive to strain, but sensitive to temperature with a sensitivity much higher than the FBG due to the large thermo-optic coefficient of silicon. The sensor is tested from room temperature to 100°C with varying strain up to ∼150με. The silicon FPI provides high temperature sensitivity of 89 pm/°C unaffected by strain. Since the FBG is attached to the host structure, it is affected by both thermal and mechanical strain; the sensitivity of these was experimentally obtained 32 pm/°C and 1.09 pm / με, respectively. Interrogated with a broadband light source and a high-speed spectrometer, the sensor shows temperature and strain resolutions of 1.9 × 10 −3 °C and 0.042 με, respectively. Here, due to the small size, enhanced sensitivity, and high resolution, this cascaded FBG-FPI sensor can be used in applications where accurate measurement of temperature and strain is required.

42 ENGINEERING↗