Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pattern Factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Observed high-altitude warming and snow cover retreat over Tibet and the Himalayas enhanced by black carbon aerosols

Abstract. Himalayan mountain glaciers and the snowpack over the Tibetan Plateau provide the headwater of several major rivers in Asia. In situ observations of snow cover extent since the 1960s suggest that the snowpack in the region have retreated significantly, accompanied by a surface warming of 2–2.5 °C observed over the peak altitudes (5000 m). Using a high-resolution ocean–atmosphere global climate model and an observationally constrained black carbon (BC) aerosol forcing, we attribute the observed altitude dependence of the warming trends as well as the spatial pattern of reductions in snow depths and snow cover extent to various anthropogenic factors. At the Tibetan Plateau altitudes, the increase in atmospheric CO2 concentration exerted a warming of 1.7 °C, BC 1.3 °C where as cooling aerosols cause about 0.7 °C cooling, bringing the net simulated warming consistent with the anomalously large observed warming. We therefore conclude that BC together with CO2 has contributed to the snow retreat trends. In particular, BC increase is the major factor in the strong elevation dependence of the observed surface warming. The atmospheric warming by BC as well as its surface darkening of snow is coupled with the positive snow albedo feedbacks to account for the disproportionately large role of BC in high-elevation regions. These findings reveal that BC impact needs to be properly accounted for in future regional climate projections, in particular on high-altitude cryosphere.

54 ENVIRONMENTAL SCIENCES↗

Experimental system for the control of surgically induced infections

The development tests to be performed on the experimental system are described in detail. The test equipment, conditions, and procedures are given. The portable clean room tests include assembly, collapsability, portability, and storage; laminar flow rate; static pressure; air flow pattern; and electrostatic buildup. The other tests are on the ventilation system, human factors evaluation, electrical subsystem, and material compatibility.

Tevebaugh, M. D.↗

Spatial and spectral simulation of LANDSAT images of agricultural areas

A LANDSAT scene simulation capability was developed to study the effects of small fields and misregistration on LANDSAT-based crop proportion estimation procedures. The simulation employs a pattern of ground polygons each with a crop ID, planting date, and scale factor. Historical greenness/brightness crop development profiles generate the mean signal values for each polygon. Historical within-field covariances add texture to pixels in each polygon. The planting dates and scale factors create between-field/within-crop variation. Between field and crop variation is achieved by the above and crop profile differences. The LANDSAT point spread function is used to add correlation between nearby pixels. The next effect of the point spread function is to blur the image. Mixed pixels and misregistration are also simulated.

Pont, W. F., Jr.↗

Adsorption of xenon and krypton on shales

A method that uses a mass spectrometer as a manometer is employed in the measurement of Xe and Kr adsorption parameters on shales and related samples, where gas partial pressures were lower than 10 to the -11th atm, corresponding adsorption coverages are only small fractions of a monolayer, and Henry's Law behavior is expected and observed. Results show heats of adsorption in the 2-7 kcal/mol range, and Henry constants at 0-25 C of 1 cu cm STP/g per atmosphere are extrapolated. Although the adsorption properties obtained are variable by sample, the range obtained suggests that shales may be capable of an equilibrium adsorption with modern air high enough to account for a significant fraction of the atmospheric inventory of Xe, and perhaps even of Kr. This effect will nevertheless not account for the factor-of-25 defficiency of atmospheric Xe, in comparison with the planetary gas patterns observed in meteorites.

Podosek, F. A.↗

Real Surface Effects in Elastohydrodynamic Lubrication

Following a general discussion of real effects in EHL, consideration is given in detail to the role played by stochastic roughness superimposed on the nominal solid boundaries. Particular attention is given to the full-film EHL regime where incipient asperity contact bears a negligible fraction of the load. Flow, from which an averaged Reynolds equation can be formed, is nonetheless modified by the amplitude and texture of the roughness patterns. In describing these effects by means of certain well-defined flow factors, it is found that only two extra parameters are needed - the rms surface height and the ratio of the correlation lengths in the two principal roughness directions. In a lowest order perturbation expansion of these flow factors in powers of the ratio of rms roughness to nominal film thickness, no other properties of the roughness appear. In most cases of practical interest, the factors describing Poiseuille flow are separable into the sum of two single-surface flow factors which means that a combination of a single equivalent rough surface versus an ideal smooth surface can always be found. For flow entrained by slip velocity the factors separate instead into a difference of single-surface factors and it becomes significant which of the two surfaces carries the equivalent roughness. Results are discussed of some applications of the averaged Reynolds equation based on the flow factor method to the EHL line contact problem. Finally, the partial EHL regime is considered where comparable load fractions are carried by the hydrodynamic film and by incipient mechanical contact. An extension of the method into this regime by combining it with asperity contact models appears most encouraging.

John H Tripp↗

Spatial and spectral simulation of Landsat images of agricultural areas

A Landsat scene simulation capability was developed to study the effects of small fields and misregistration on Landsat-based crop proportion estimation procedures. The simulation employs a pattern of ground polygons each with a crop ID, planting date, and scale factor. Historical greenness/brightness crop development profiles generate the mean signal values for each polygon. Historical within-field covariances add texture to pixels in each polygon. The planting dates and scale factors create between-field/within-crop variation. Between field and crop variation is achieved by the above and crop profile differences. The Landsat point spread function is used to add correlation between nearby pixels. The next effect of the point spread function is to blur the image. Mixed pixels and misregistration are also simulated. Previously announced in STAR as N82-32813

Pont, W. F., Jr.↗

A computational study of multiple jet and wall interaction

In the fuel preburner of the Space Shuttle Main Engine, face plate, injector, and baffle erosion have been observed. The observed patterns of erosion suggest that flame attachment to the walls is a contributing factor. To better understand the physical phenomena involved, a portion of the preburner was modeled computationally. The simulated 'preburner' had three two-dimensional jets entering a cavity adjacent to a baffle. The computational model employed the Patankar Spalding algorithm with upwind differencing. The turbulence model was a standard k-epsilon model with wall functions. The effects of incoming boundary conditions on turbulent kinetic energy and dissipation, k and epsilon, was studied. The results indicate a very strong sensitivity to these boundary conditions over certain ranges of values.

Campbell, W.↗

Evaluation of a multi-point method for determining acoustic impedance

An investigation was conducted to explore potential improvements provided by a Multi-Point Method (MPM) over the Standing Wave Method (SWM) and Two-Microphone Method (TMM) for determining acoustic impedance. A wave propagation model was developed to model the standing wave pattern in an impedance tube. The acoustic impedance of a test specimen was calculated from a best fit of this standing wave pattern to pressure measurements obtained along the impedance tube centerline. Three measurement spacing distributions were examined: uniform, random, and selective. Calculated standing wave patterns match the point pressure measurement distributions with good agreement for a reflection factor magnitude range of 0.004 to 0.999. Comparisons of results using 2, 3, 6, and 18 measurement points showed that the most consistent results are obtained when using at least 6 evenly spaced pressure measurements per half-wavelength. Also, data were acquired with broadband noise added to the discrete frequency noise and impedances were calculated using the MPM and TMM algorithms. The results indicate that the MPM will be superior to the TMM in the presence of significant broadband noise levels associated with mean flow.

Jones, Michael G.↗

The abundance of AsH3 in Jupiter

Both ground-based and airborne observations of the AsH3 Q-branch at 2126/cm, in conjunction with newly-analyzed laboratory comparison spectra at AsH3, are employed in the derivation of a new estimate of Jovian As abundance. The mole fraction on AsH3 in the Jovian atmosphere is 0.22 + or - 0.11 ppb; this is merely 0.5 times the solar abundance, and a factor-of-9 less than the mole fraction found in Saturn, duplicating the pattern noted in the relative abundance of P in these two planets and furnishing a useful constraint for models of heavy element incorporation in the outer planets' gaseous envelopes.

Noll, Keith S.↗

Cooling rates of chondrules: A new approach

Mineralogy and texture of chondrules have been reproduced experimentally and it was demonstrated that the abundance of heterogeneous nuclei is an important factor controlling chondrule textures. Cooling rates of chondrules were estimated from the zoning patterns of olivine. Low cooling rates (less than 100 C/h) yielded chemically homogeneous olivine crystals, whereas higher cooling rates, between 100 and 2000 C/h, produced olivine compositions similar to those observed in natural chondrules. We present a new approach to determining cooling rates of chondrules based on the microstructure of chondrule clinopyroxene and plagioclase. All observations were made on Allende chondrules. Two independent processes (Ca and Mg diffusion in pyroxene and Al/Si ordering in plagioclase) yield similar cooling rates on the order of 10-1 C/h for granular olivine pyroxene (GOP) chondrules in Allende. Our cooling rates are at least one order of magnitude lower than those derived from dynamic crystallization experiments.

Weinbruch, S.↗

Spectroscopic measurements of element abundances in the solar corona: Variations on the FIP theme

Solar wind and solar energetic particle (SEP) data yield systematic differences between elemental abundances in the corona and in the photosphere related to the first ionization potential (FIP) of the elements: low-FIP elements are preferentially enhanced relative to high-FIP elements by about a factor of four. Spectroscopic studies of the inner corona show that such a pattern may apply on average but not in detail for coronal loops: substantial abundance differences occur between different types of coronal structures, and variations have been found from flare to flare, from one active region to another, and over time in the same region; further, in some flares, anomalies such as enhanced Ne:O ratios, distinctly at odds with the FIP pattern, show that a competing element selection mechanism sometimes operates. Details of the observed abundance variability -- such as the magnitude of the variations, the relevant temporal and spatial scales, and correlations with other properties of the given coronal structure -- may give important clues to the processes which supply and heat the corona, or they may reflect the changing physical conditions or locations where those processes take place. However, many such details remain to be established definitively. At present, abundance variability is primarily a major complication to data analysis and interpretation. However, once it is better understood, it may provide a new diagnostic tool for probing the lower layers of the solar atmosphere.

Saba, J. L. R.↗

Predicting Turbulent Convective Heat Transfer in Three-Dimensional Duct Flows

The performance of an explicit algebraic stress model is assessed in predicting the turbulent flow and forced heat transfer in straight ducts, with square, rectangular, trapezoidal and triangular cross-sections, under fully developed conditions over a range of Reynolds numbers. Iso-thermal conditions are imposed on the duct walls and the turbulent heat fluxes are modeled by gradient-diffusion type models. At high Reynolds numbers (>/= 10(exp 5)), wall functions are used for the velocity and temperature fields; while at low Reynolds numbers damping functions are introduced into the models. Hydraulic parameters such as friction factor and Nusselt number are well predicted even when damping functions are used, and the present formulation imposes minimal demand on the number of grid points without any convergence or stability problems. Comparison between the models is presented in terms of the hydraulic parameters, friction factor and Nusselt number, as well as in terms of the secondary flow patterns occurring within the ducts.

Rokni, M.↗

Modeling Bird Migration under Climate Change: A Mechanistic Approach

How will migrating birds respond to changes in the environment under climate change? What are the implications for migratory success under the various accelerated climate change scenarios as forecast by the Intergovernmental Panel on Climate Change? How will reductions or increased variability in the number or quality of wetland stop-over sites affect migratory bird species? The answers to these questions have important ramifications for conservation biology and wildlife management. Here, we describe the use of continental scale simulation modeling to explore how spatio-temporal changes along migratory flyways affect en-route migration success. We use an individually based, biophysical, mechanistic, bird migration model to simulate the movement of shorebirds in North America as a tool to study how such factors as drought and wetland loss may impact migratory success and modify migration patterns. Our model is driven by remote sensing and climate data and incorporates important landscape variables. The energy budget components of the model include resting, foraging, and flight, but presently predation is ignored. Results/Conclusions We illustrate our model by studying the spring migration of sandpipers through the Great Plains to their Arctic breeding grounds. Why many species of shorebirds have shown significant declines remains a puzzle. Shorebirds are sensitive to stop-over quality and spacing because of their need for frequent refueling stops and their opportunistic feeding patterns. We predict bird "hydrographs that is, stop-over frequency with latitude, that are in agreement with the literature. Mean stop-over durations predicted from our model for nominal cases also are consistent with the limited, but available data. For the shorebird species simulated, our model predicts that shorebirds exhibit significant plasticity and are able to shift their migration patterns in response to changing drought conditions. However, the question remains as to whether this behavior can be maintained over increasing and sustained environmental change. Also, the problem is much more complex than described by the current processes captured in our model. We have taken some important and interesting steps, and our model does demonstrate how local scale information about individual stop-over sites can be linked into the migratory flyway as a whole. We are incorporating additional, species specific, mechanistic processes to better reflect different climate change scenarios

Smith, James A.↗

Detecting Change in Urban Areas at Continental Scales with MODIS Data

Urbanization is one of the most important components of global environmental change, yet most of what we know about urban areas is at the local scale. Remote sensing of urban expansion across large areas provides information on the spatial and temporal patterns of growth that are essential for understanding differences in socioeconomic and political factors that spur different forms of development, as well the social, environmental, and climatic impacts that result. However, mapping urban expansion globally is challenging: urban areas have a small footprint compared to other land cover types, their features are small, they are heterogeneous in both material composition and configuration, and the form and rates of new development are often highly variable across locations. Here we demonstrate a methodology for monitoring urban land expansion at continental to global scales using Moderate Resolution Imaging Spectroradiometer (MODIS) data. The new method focuses on resolving the spectral and temporal ambiguities between urban/non-urban land and stable/changed areas by: (1) spatially constraining the study extent to known locations of urban land; (2) integrating multitemporal data from multiple satellite data sources to classify c. 2010 urban extent; and (3) mapping newly built areas (2000-2010) within the 2010 urban land extent using a multi-temporal composite change detection approach based on MODIS 250 m annual maximum enhanced vegetation index (EVI). We test the method in 15 countries in East-Southeast Asia experiencing different rates and manifestations of urban expansion. A two-tiered accuracy assessment shows that the approach characterizes urban change across a variety of socioeconomic/political and ecological/climatic conditions with good accuracy (70-91% overall accuracy by country, 69-89% by biome). The 250 m EVI data not only improve the classification results, but are capable of distinguishing between change and no-change areas in urban areas. Over 80% of the error in the change detection can be related to definitional issues or error propagation, rather than algorithm error. As such, these methods hold great potential for routine monitoring of urban change, as well as for providing a consistent and up-to-date dataset on urban extent and expansion for a rapidly evolving region.

Urban areas↗

Atomic Resolution Coherent Diffractive Imaging and Ultrafast Science

A major scientific challenge is determining the 3-D atomic structure of small nanostructures, including single molecules. Coherent diffractive imaging (CDI) is a promising approach. Recent progress has demonstrated coherent diffraction patterns can be recorded from individual nanostructures and phased to reconstruct their structure. However, overcoming the dose limit imposed by radiation damage is a major obstacle toward the full potential of CDI. One approach is to use ultrafast x-ray or electron pulses. In electron diffraction, amplitudes recorded in a diffraction pattern are unperturbed by lens aberrations, defocus, and other microscope resolution-limiting factors. Sub-A signals are available beyond the information limit of direct imaging. Significant contrast improvement is obtained compared to high-resolution electron micrographs. progress has also been made in developing time-resolved electron diffraction and imaging for the study of ultrafast dynamic processes in materials. This talk will cover these crosscutting issues and the convergence of electron and x-ray diffraction techniques toward structure determination of single molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Characterizing Walk Trips in communities by Using Data from 2009 National Household Travel Survey, American Community Survey, and Other Sources

Non-motorized travel (i.e. walking and bicycling) are of increasing interest to the transportation profession, especially in context with energy consumption, reducing vehicular congestion, urban development patterns, and promotion of healthier life styles. This research project aimed to identify factors impacting the amount of travel for both walk and bike trips at the Census block group or tract level, using several public and private data sources. The key survey of travel behavior is the 2009 National Household Travel Survey (NHTS) which had over 87,000 walk trips for persons 16 and over, and over 6000 bike trips for persons 16 and over. The NHTS, in conjunction with the Census Bureau s American Community Survey, street density measures using Census Bureau TIGER, WalkScore , Nielsen Claritas employment estimates, and several other sources were used for this study. Stepwise Logistic Regression modeling techniques as well as Discriminant Analysis were applied using the integrated data set. While the models performed reasonably well for walk trips, travel by bike was abandoned due to sparseness of data. This paper discusses data sources utilized and modeling processes conducted under this study. It also presents a summary of findings and addresses data challenges and lesson-learned from this research effort.

NHTS↗

New Efficient Sparse Space Time Algorithms for Superparameterization on Mesoscales

Superparameterization (SP) is a large-scale modeling system with explicit representation of small-scale and mesoscale processes provided by a cloud-resolving model (CRM) embedded in each column of a large-scale model. New efficient sparse space-time algorithms based on the original idea of SP are presented. The large-scale dynamics are unchanged, but the small-scale model is solved in a reduced spatially periodic domain to save the computation cost following a similar idea applied by one of the authors for aquaplanet simulations. In addition, the time interval of integration of the small-scale model is reduced systematically for the same purpose, which results in a different coupling mechanism between the small- and large-scale models. The new algorithms have been applied to a stringent two-dimensional test suite involving moist convection interacting with shear with regimes ranging from strong free and forced squall lines to dying scattered convection as the shear strength varies. The numerical results are compared with the CRM and original SP. It is shown here that for all of the regimes of propagation and dying scattered convection, the large-scale variables such as horizontal velocity and specific humidity are captured in a statistically accurate way (pattern correlations above 0.75) based on space-time reduction of the small-scale models by a factor of 1/3; thus, the new efficient algorithms for SP result in a gain of roughly a factor of 10 in efficiency while retaining a statistical accuracy on the large-scale variables. Even the models with 1/6 reduction in space-time with a gain of 36 in efficiency are able to distinguish between propagating squall lines and dying scattered convection with a pattern correlation above 0.6 for horizontal velocity and specific humidity. These encouraging results suggest the possibility of using these efficient new algorithms for limited-area mesoscale ensemble forecasting.

99 GENERAL AND MISCELLANEOUS↗

Cecropin P1 antimicrobial peptide modulates differential expression of immune relevant genes in rainbow trout ( Oncorhynchus mykiss ) gill cell line, RTgill-W1

Accumulated evidence indicates that antimicrobial peptides modulate immune activities in fish. In this study, we profiled the differential expression patterns of representative immune relevant genes in an epithelial-like cell line of rainbow trout gill, RTgill-W1, in response to exposure of cecropin P1 antimicrobial peptide. RTgill-W1 cells were treated with synthetic cecropin P1 over time (0, 2, 4 and 24 h) with or without the present of lipopolysaccharide (LPS) or polyinosinic polycytidylic acid (PolyI:C). The relative abundances of each mRNA were measured by real-time quantitative PCR. The dose-response study revealed significant perturbations of mRNA levels of genes related to pro-inflammation, acute phase, surface proteins and transcription factors at 30 μM of cecropin P1. In addition, cecropin P1 altered the differential expression patterns that were induced by LPS or PolyI:C, at different time points in RTgill-W1. Overall, our results indicate that cecropin P1 exhibits pro-inflammation activity, modulate cell-cell interaction and cytokine signal transduction in rainbow trout gill cell, and may suggest a potential application of this peptide as an immune adjuvant for disease control in aquaculture.

59 BASIC BIOLOGICAL SCIENCES↗