SEARCH · Engineering Papers
Results for “PLASMA SHEATH”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Equilibria with incompressible flows from symmetry analysis
We identify and study new nonlinear axisymmetric equilibria with incompressible flow of arbitrary direction satisfying a generalized Grad Shafranov equation by extending the symmetry analysis presented by Cicogna and Pegoraro [Phys. Plasmas 22, 022520 (2015)]. In particular, we construct a typical tokamak D-shaped equilibrium with peaked toroidal current density, monotonically varying safety factor, and sheared electric field.
Predictions for Gyro-phase Drift in MDPX
This work assesses the feasibility of observing the gyro-phase drift in the Auburn Magnetized Dusty Plasma Experiment [MDPX, described by Thomas et al., Plasma Phys. Controlled Fusion 54, 124034 (2012)]. The gyro-phase drift arises when a dust grain does not instantaneously reach the in-situ-equilibrium grain charge during gyro-synchronous grain-charge modulation. Koepke et al. [J. Plasma Phys. 79, 1099 (2013)] first suggested using MDPX to observe the gyro-phase drift, and here we use a single-particle trajectory tracker with an iterative velocity solver, using a fixed timestep for grain motion and an adaptive time step for grain charging, to consider all relevant dust grain forces to assess gyro-phase drift arising from gradual inhomogeneity. Additionally, the semi-analytic theory developed by Walker et al. [J. Plasma Phys. 80, 395 (2014)] predicts dust grain motion in abrupt inhomogeneity for MDPX-relevant conditions. We compare three grain-charging models with each other and with the single-particle trajectory tracker and found to predict distinctly different trajectories depending on the treatment of neutral drag and flowing ions. The measurement thresholds for Particle Tracking Velocimetry permit gyro-phase drift detection in MDPX for the abrupt inhomogeneity, given sufficiently large enough UV photoelectron flux (fuv/[n e v the ] > 0.01) and low enough neutral gas pressure (less than one mTorr). The Orbit-Motion-Limited charge model and the charge models developed by Patacchini et al. [Phys. Plasmas 14, 062111 (2007)] and Gatti and Kortshagen [Phys. Rev. E 78, 046402 (2008)] can, in principle, be distinguished by gyro-phase drift in the abrupt inhomogeneity, but large magnetic fields, large UV photoelectron flux, and low neutral gas pressure are required. Gyro-phase drift for a gradual inhomogeneity in the ratio ne/ni, arising from the presence of a radial electric field, is predicted to be undetectable.
Kinetic simulations of gas breakdown in the dense plasma focus
We describe the first fully-kinetic, collisional, and electromagnetic simulations of the breakdown phase of a MA-scale dense plasma focus and are shown to agree with measured electrical characteristics, including breakdown time. In the model, avalanche ionization is driven by cathode electron emission and this results in incomplete gas breakdown along the insulator. This reinforces the importance of the conditioning process that creates a metallic layer on the insulator surface. The simulations, nonetheless, help explain the relationship between the gas pressure, the insulator length, and the coaxial gap width. In the past, researchers noted three breakdown patterns related to pressure. Simulation and analytic results show that at low pressures, long ionization path lengths lead to volumetric breakdown, while high pressures lead to breakdown across the relatively small coaxial electrode gap. In an intermediate pressure regime, ionization path lengths are comparable to the insulator length which promotes ideal breakdown along the insulator surface.
An ideal MHD δW stability analysis that bypasses the Newcomb equation
In the following work, we demonstrate the efficacy of a Riccati δW ideal MHD stability analysis that bypasses the numerically intractable integration of the Newcomb equation. By transforming the linear Newcomb equation into a quadratic Riccati equation, an accurate and equivalent δW analysis is performed that is shown to enjoy some numerical advantages. Additionally, we demonstrate that the Riccati approach is better conditioned than its Newcomb counterpart at the magnetic axis, and we apply dynamical systems insights to examine its behavior at singular points. We further discuss the constraints involved in solving for the extremal admissible perturbations of a δW analysis.
Three-dimensional cross-field flows at the plasma-material interface in an oblique magnetic field
This article describes experimental evidence that the magnetic presheath is a fully three-dimensional structure modified by ion–neutral collisions. Velocity distributions of both ions and neutrals, obtained via laser-induced fluorescence, show that cross field ion drifts do not result from entrainment of ions in a flowing neutral background. Ion flows parallel to E x B arise and accelerate to as much as 0.2c s within several ion gyroradii of the boundary surface, where c s is the sound speed. Within measurement resolution, the onset of the E x B aligned flow occurs at the same distance to the surface that ions begin to deflect from travel along magnetic field lines. Collisional fluid and particle-in-cell simulations of the boundary region are compared to the experimental measurements. We find that, in contrast to the classical collisionless Chodura model, collisional effects between the ions and the non-flowing neutral population are essential to quantitatively predict the observed ion drift velocities. No momentum coupling between ions and neutrals, separable from noise and other effects, is observed in either signal. Here, we discuss several explanations and implications of this observation.
Dynamic thermal behavior of polycrystalline LaB 6 hollow cathodes
Lanthanum hexaboride (LaB6) hollow cathodes have demonstrated a capability for long life operation, which is critical to many space exploration missions. Thermal characterization of LaB6 hollow cathodes has revealed lower than expected electron emitter temperatures when the cathode reaches a steady state. This phenomenon is observed at discharge currents ranging from 5 to 35 A and xenon mass flow rates of 5–25 SCCM in cathodes with three different orifice diameters. Thus, the currently accepted value of the work function for polycrystalline LaB 6 , 2.67 eV, does not describe well the emission characteristics of LaB6 hollow cathodes operating with internal gas discharges at a steady state. We use empirically measured temperatures combined with a model of the hollow cathode emitter and xenon discharge to estimate the value of the work function, yielding a value ranging from 2.1 to 2.44 eV. This lower work function value implies that LaB6 hollow cathodes are expected to have even longer lifetimes than previously anticipated, further establishing them as a more suited alternative to other conventional cathode technologies for the task of long duration travel. Direct measurements of the work function as a function of depth on a hollow cathode emitter using x-ray photoelectron spectroscopy and ion beam milling indicate that the work function decreases with depth. We postulate several mechanisms that could explain the observed work function enhancement. Altogether, our results have important implications to the design, study approach, and operation of LaB 6 cathodes and potentially other cathodes with hollow configuration. Finally, our work opens the question of why the work function is reduced upon interaction with Xe plasma.
Pulsed power to control growth of silicon nanoparticles in low temperature flowing plasmas
Low-temperature plasmas have seen increasing use for synthesizing high-quality, mono-disperse nanoparticles (NPs). Recent work has highlighted that an important process in NP growth in plasmas is particle trapping—small, negatively charged nanoparticles become trapped by the positive electrostatic potential in the plasma, even if only momentarily charged. In this article, results are discussed from a computational investigation into how pulsing the power applied to an inductively coupled plasma (ICP) reactor may be used for controlling the size of NPs synthesized in the plasma. The model system is an ICP at 1 Torr to grow silicon NPs from an Ar/SiH 4 gas mixture. This system was simulated using a two-dimensional plasma hydrodynamics model coupled to a three-dimensional kinetic NP growth and trajectory tracking model. The effects of pulse frequency and pulse duty cycle are discussed. We identified separate regimes of pulsing where particles become trapped for one pulsed cycle, a few cycles, and many cycles—each having noticeable effects on particle size distributions. For the same average power, pulsing can produce a stronger trapping potential for particles when compared to continuous wave power, potentially increasing particle mono-dispersity. Pulsing may also offer a larger degree of control over particle size for the same average power. Experimental confirmation of predicted trends is discussed.
Transition from retrograde to prograde drift instabilities in a magnetron microdischarge
Rotating plasma structures, or “spokes,” in magnetized discharges characterized by perpendicular electric and magnetic fields have been seen in a growing number of studies and are believed to be the result of gradient-driven drift instabilities. Under certain conditions, we have shown the spoke’s rotation to be opposite to the E B direction, i.e., retrograde in its expected direction. Recently, we have linked such counter-intuitive rotation to a local inversion of the electric field. Here, we give further experimental evidence for this inversion and attempt to provide an explanation for a relatively distinct transition seen between retrograde and positive (prograde) drift. In the experiments, a partially magnetized plasma forms inside a magnetron device of mm radius operated with argon. Discharge current–voltage measurements are acquired for a range of argon fill pressure and inter-electrode spacing. We find two branches of operation—a low current branch of negative resistance, coinciding with the retrograde spoke rotation, and a higher current branch of positive resistance, coincident with prograde spoke rotation. We postulate that at low discharge currents, high magnetic field confinement leads to a large density gradient, causing more electron transport to the anode than that demanded by the external circuit. At higher currents, anomalous axial electron transport (across the magnetic field lines) becomes dominant, eliminating the conditions for field inversion. Here, the current thresholds for the field inversion are found to be sensitive to the argon pressure and inter-electrode spacing.
Similarity-based scaling networks for capacitive radio frequency discharge plasmas
We demonstrate similarity-based scaling networks for capacitive radio frequency (RF) plasmas, which extensively correlate discharge characteristics under varied conditions, incorporating the transition from original to similarity states. Based on fully kinetic particle-in-cell simulations, similar RF discharges in argon are demonstrated with three external control parameters (gas pressure, gap distance, and driving frequency) simultaneously tuned. A complete set of scaling pathways regarding fundamental discharge parameters is obtained, from which each plasma state finds its neighboring node with only one control parameter tuned. The results from this study provide a promising strategy for plasma multi-parameter mapping, enabling effective cross-comparisons, prediction, and manipulation of RF discharge plasmas.
Hysteresis between gas breakdown and plasma discharge
In direct-current (DC) discharge, it is well known that hysteresis is observed between the Townsend (gas breakdown) and glow regimes. Forward and backward voltage sweep is performed using a one-dimensional particle-in-cell Monte Carlo collision (PIC-MCC) model considering a ballast resistor. When increasing the applied voltage after reaching the breakdown voltage (V b ), transition from Townsend to glow discharges is observed. When decreasing the applied voltage from the glow regime, the discharge voltage (V d ) between the anode–cathode gap can be smaller than the breakdown voltage, resulting in a hysteresis, which is consistent with experimental observations. Next, the PIC-MCC model is used to investigate the self-sustaining voltage (V s ) in the presence of finite initial plasma densities between the anode and cathode gap. It is observed that the self-sustaining voltage coincides with the discharge voltage obtained from the backward voltage sweep. In addition, the self-sustaining voltage decreases with increased initial plasma density and saturates above a certain initial plasma density, which indicates a change in plasma resistivity. The decrease in self-sustaining voltage is associated with the electron heat loss at the anode for the low pd (rarefied) regime. In the high pd (collisional) regime, the ion energy loss toward the cathode due to the cathode fall and the inelastic collision loss of electrons in the bulk discharge balance out. Finally, it is demonstrated that the self-sustaining voltage collapses to a singular value, despite the presence of a initial plasma, for microgaps when field emission is dominant, which is also consistent with experimental observations.
Mode transitions and spoke structures in E × B Penning discharge
Two-dimensional particle-in-cell simulations in the (radial-azimuthal) plane perpendicular to the axial direction of a cylindrical $E$ x $B$ Penning discharge are presented. The low-pressure discharge is self-consistently supported by plasma ionization from the electron beam injected axially, along the direction of the external magnetic field. It is shown that with the increasing strength of the external magnetic field, the discharge undergoes a sequence of transitions between several azimuthal modes. Azimuthal m > 1 spiral arm structures are excited at low magnetic field values as plasma confinement improves and the radial density profile becomes peaked. With a larger field, spiral arms with m > 1 are replaced by the m = 1 spoke mode, most clearly seen in plasma density. A transition from spiral arms to the spoke regime occurs when the plasma potential in the center changes from weakly positive (or zero) to negative. Further increase in the magnetic field results in a well-developed m = 1 spoke mode with additional small-scale higher-frequency m > 1 structures inside and around the spoke. It is shown that while ionization and collisions affect some characteristics of the observed fluctuations, the basic features of the spoke and m > 1 spiral structure remained similar without ionization. The role of energy conservation in small-scale high-frequency modes and spoke dynamics is discussed. It is demonstrated that in regimes with the m = 1 spoke mode, additional m = 4 harmonics of the ion and electron fluxes to the wall appear due to the square boundary. The frequency of the m = 1 mode is weakly affected by the geometry of the boundary.
MAGNETIC FIELD STRENGTH FLUCTUATIONS AND THE q-TRIPLET IN THE HELIOSHEATH: VOYAGER 2 OBSERVATIONS FROM 91.0 TO 94.2 AU AT LATITUDE 30 Degree-Sign S
Voyager 2 (V2) was in the heliosheath during 2010, at (91.0-94.2) AU from the Sun and at the latitudes (28. Degree-Sign 8-29. Degree-Sign 3 S) AU, observing solar wind that left the Sun during 2009, when solar activity was very low. There was no feature in B(t) associated with the changes in the plasma parameters observed near 2010.4. The CR-B relation was satisfied. The fluctuations of daily averages of B showed (1) a Gaussian distribution of B, (2) a q-Gaussian of the daily increments of B with q = 1.6, (3) a power-law correlation of B on scales from 1 to 16 days, (4) multifractal structure of B on scales from 1 to 8 days, and (5) a 1/f spectrum of B on scales from 1 to 100 days. The amplitude of the compressive microscale fluctuations of B during several hours on each day is described by the standard deviation (SD) of the 48 s averages of B during the day. Items 2, 3, and 4 determine a 'q-triplet' in the heliosheath. Large-scale fluctuations of SD show (1) a lognormal distribution of SD; (2) an average value of SD = 0.19, 20% of the average B; (3) a q-Gaussian distribution of the increments of SD with q = 1.4; (4) a power-law correlation on scales from 1 to 16 days; and (5) a 1/f spectrum on scales from 1 to 100 days. The heliosheath was in a quasi-stationary, metastable equilibrium state with well-defined structure over a wide range of scales near V2 during 2010.
The first taste of a hot channel in interplanetary space
A hot channel (HC) is a high temperature (∼10 MK) structure in the inner corona first revealed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. Eruptions of HCs are often associated with flares and coronal mass ejections (CMEs). Results of previous studies have suggested that an HC is a good proxy for a magnetic flux rope (MFR) in the inner corona as well as another well known MFR candidate, the prominence-cavity structure, which has a normal coronal temperature (∼1–2 MK). In this paper, we report a high temperature structure (HTS, ∼1.5 MK) contained in an interplanetary CME induced by an HC eruption. According to the observations of bidirectional electrons, high temperature and density, strong magnetic field, and its association with the shock, sheath, and plasma pile-up region, we suggest that the HTS is the interplanetary counterpart of the HC. The scale of the measured HTS is around 14 R {sub ⊙}, and it maintained a much higher temperature than the background solar wind even at 1 AU. It is significantly different from the typical magnetic clouds, which usually have a much lower temperature. Our study suggests that the existence of a corotating interaction region ahead of the HC formed a magnetic container to inhibit expansion of the HC and cool it down to a low temperature.
SCALING OF THE GROWTH RATE OF MAGNETIC ISLANDS IN THE HELIOSHEATH
Current sheets thinner than the ion inertial length are unstable to the tearing instability and will develop magnetic islands that grow due to magnetic reconnection. We investigate whether the growth of magnetic islands in a current sheet can continue indefinitely, or in the case of the heliosheath, until reaching a neighboring current sheet, and at what rate the islands grow. We investigate the development and growth of magnetic islands using a particle-in-cell code, starting from particle noise. Performing a scaling of the growth of magnetic islands versus the system size, we find that the growth rate is independent of the system size up to the largest simulation we were able to complete. The islands are able to continue growing as long as they merge with each other and maintain a high aspect ratio. Otherwise, there is not enough magnetic tension to sustain reconnection. When applied to the sectored magnetic fields in the heliosheath, we show that the islands can continue growing until they reach the sector width and do so in much less time than it takes for the islands to convect through the heliosheath.
MAGNETIC FLUX CONSERVATION IN THE HELIOSHEATH
Voyager 1(V1) and Voyager 2(V2) have observed heliosheath plasma since 2005 December and 2007 August, respectively. The observed speed profiles are very different at the two spacecrafts. Speeds at V1 decreased to zero in 2010 while the average speed at V2 is a constant 150 km s{sup -1} with the direction rotating tailward. The magnetic flux is expected to be constant in these heliosheath flows. We show that the flux is constant at V2 but decreases by an order of magnitude at V1, even after accounting for divergence of the flows and changes in the solar field. If reconnection were responsible for this decrease, the magnetic field would lose 70% of its free energy to reconnection and the energy density released would be 0.6 eV cm{sup -3}.
Dynamical level-crossing model for the time-dependent electron emission from dielectric surfaces in symmetric dielectric barrier discharges
In field emission plasmas, electrons that initiate plasma formation come from the surface of a metallic electrode, or wall, with emission controlled by the electron-work function of the wall, and can be computed via the Fowler-Nordheim formula. Impinging ions modify the rate at which electrons leave the surface, and are accounted via the coefficient of secondary electron emission. However, in the case of dielectric surfaces, the microscopic mechanism by which electrons are emitted is not as well understood. While simulations of dielectric barrier discharge plasmas assume an initial density of electrons in a time-dependent simulation, whether the presence of electrons is a necessary ambient condition or whether it is a result of emission from a surface is not clear. This is particularly relevant in the context of micro and nanoscale plasma generators when surface-related effects become more important. Here we consider electron emission from dielectric surfaces in the context of dielectric barrier discharges. The configuration of interest consists of two parallel-plate metallic electrodes, each covered by a dielectric layer. Assuming that the initial electrons for plasma formation arise from the surface, we compute the rate of charge transfer from surfaces, which is a necessary, but not sufficient, condition for plasma formation. This paper presents the application of the theory of nonadiabatic transitions (dynamical level crossing) to the problem of electron emission from dielectric surfaces in dielectric barrier discharges. Furthermore, the microscopic model of electron transfer described here has potential applications in the design of micro and nanoscale plasma generators.
Discrete breathers in hexagonal dusty plasma lattices
The occurrence of single-site or multisite localized vibrational modes, also called discrete breathers, in two-dimensional hexagonal dusty plasma lattices is investigated. The system is described by a Klein-Gordon hexagonal lattice characterized by a negative coupling parameter epsilon in account of its inverse dispersive behavior. A theoretical analysis is performed in order to establish the possibility of existence of single as well as three-site discrete breathers in such systems. The study is complemented by a numerical investigation based on experimentally provided potential forms. This investigation shows that a dusty plasma lattice can support single-site discrete breathers, while three-site in phase breathers could exist if specific conditions, about the intergrain interaction strength, would hold. On the other hand, out of phase and vortex three-site breathers cannot be supported since they are highly unstable.