Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTODETECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Optical phonon modes in InGaN/GaN dot-in-a-wire heterostructures grown by molecular beam epitaxy

We report on the studies of optical phonon modes in nearly defect-free GaN nanowires embedded with intrinsic InGaN quantum dots by using oblique angle transmission infrared spectroscopy. These phonon modes are dependent on the nanowire fill-factor, doping densities of the nanowires, and the presence of InGaN dots. These factors can be applied for potential phonon based photodetectors whose spectral responses can be tailored by varying a combination of these three parameters. The optical anisotropy along the growth (c-) axis of the GaN nanowire contributes to the polarization agility of such potential photodetectors.

36 MATERIALS SCIENCE↗

Determination of charge-carrier diffusion length in the photosensing layer of HgCdTe n-on-p photovoltaic infrared focal plane array detectors

In the present paper, we propose a method for evaluating the bulk diffusion length of minority charge carriers in the photosensing layer of photovoltaic focal plane array (FPA) photodetectors. The method is based on scanning a strip-shaped illumination spot with one of the detector diodes at a low level of photocurrents j{sub ph} being registered; such scanning provides data for subsequent analysis of measured spot-scan profiles within a simple diffusion model. The asymptotic behavior of the effective (at j{sub ph} ≠ 0) charge-carrier diffusion length l{sub d} {sub eff} as a function of j{sub ph} for j{sub ph} → 0 inferred from our experimental data proved to be consistent with the behavior of l{sub d} {sub eff} vs j{sub ph} as predicted by the model, while the obtained values of the bulk diffusion length of minority carriers (electrons) in the p-HgCdTe film of investigated HgCdTe n-on-p FPA photodetectors were found to be in a good agreement with the previously reported carrier diffusion-length values for HgCdTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical re-injection in cavity-enhanced absorption spectroscopy

Non-mode-matched cavity-enhanced absorption spectrometry (e.g., cavity ringdown spectroscopy and integrated cavity output spectroscopy) is commonly used for the ultrasensitive detection of trace gases. These techniques are attractive for their simplicity and robustness, but their performance may be limited by the reflection of light from the front mirror and the resulting low optical transmission. Although this low transmitted power can sometimes be overcome with higher power lasers and lower noise detectors (e.g., in the near-infrared), many regimes exist where the available light intensity or photodetector sensitivity limits instrument performance (e.g., in the mid-infrared). In this article, we describe a method of repeatedly re-injecting light reflected off the front mirror of the optical cavity to boost the cavity's circulating power and deliver more light to the photodetector and thus increase the signal-to-noise ratio of the absorption measurement. We model and experimentally demonstrate the method's performance using off-axis cavity ringdown spectroscopy (OA-CRDS) with a broadly tunable external cavity quantum cascade laser. The power coupled through the cavity to the detector is increased by a factor of 22.5. The cavity loss is measured with a precision of 2 × 10{sup −10} cm{sup −1}/√(Hz;) an increase of 12 times over the standard off-axis configuration without reinjection and comparable to the best reported sensitivities in the mid-infrared. Finally, the re-injected CRDS system is used to measure the spectrum of several volatile organic compounds, demonstrating the improved ability to resolve weakly absorbing spectroscopic features.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Indium phosphide-based monolithically integrated PIN waveguide photodiode readout for resonant cantilever sensors

An integrated photodiode displacement readout scheme for a microelectromechanical cantilever waveguide resonator sensing platform is presented. III-V semiconductors are used to enable the monolithic integration of passive waveguides with active optical components. This work builds upon previously demonstrated results by measuring the displacement of cantilever waveguide resonators with on-chip waveguide PIN photodiodes. The on-chip integration of the readout provides an additional 70% improvement in mass sensitivity compared to off-chip photodetector designs due to measurement stability and minimized coupling loss. In addition to increased measurement stability, reduced packaging complexity is achieved due to the simplicity of the readout design. We have fabricated cantilever waveguides with integrated photodetectors and experimentally characterized these cantilever sensors with monolithically integrated PIN photodiodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semipolar and nonpolar GaN epi-films grown on m-sapphire by plasma assisted molecular beam epitaxy

We hereby report the development of non-polar epi-GaN films of usable quality, on an m-plane sapphire. Generally, it is difficult to obtain high-quality nonpolar material due to the planar anisotropic nature of the growth mode. However, we could achieve good quality epi-GaN films by involving controlled steps of nitridation. GaN epilayers were grown on m-plane (10-10) sapphire substrates using plasma assisted molecular beam epitaxy. The films grown on the nitridated surface resulted in a nonpolar (10-10) orientation while without nitridation caused a semipolar (11-22) orientation. Room temperature photoluminescence study showed that nonpolar GaN films have higher value of compressive strain as compared to semipolar GaN films, which was further confirmed by room temperature Raman spectroscopy. The room temperature UV photodetection of both films was investigated by measuring the I-V characteristics under UV light illumination. UV photodetectors fabricated on nonpolar GaN showed better characteristics, including higher external quantum efficiency, compared to photodetectors fabricated on semipolar GaN. X-ray rocking curves confirmed better crystallinity of semipolar as compared to nonpolar GaN which resulted in faster transit response of the device.

36 MATERIALS SCIENCE↗

Surface-plasmon enhanced photodetection at communication band based on hot electrons

Surface plasmons can squeeze light into a deep-subwavelength space and generate abundant hot electrons in the nearby metallic regions, enabling a new paradigm of photoconversion by the way of hot electron collection. Unlike the visible spectral range concerned in previous literatures, we focus on the communication band and design the infrared hot-electron photodetectors with plasmonic metal-insulator-metal configuration by using full-wave finite-element method. Titanium dioxide-silver Schottky interface is employed to boost the low-energy infrared photodetection. The photodetection sensitivity is strongly improved by enhancing the plasmonic excitation from a rationally engineered metallic grating, which enables a strong unidirectional photocurrent. With a five-step electrical simulation, the optimized device exhibits an unbiased responsivity of ∼0.1 mA/W and an ultra-narrow response band (FWHM = 4.66 meV), which promises to be a candidate as the compact photodetector operating in communication band.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicon-nitride photonic circuits interfaced with monolayer MoS 2

Herein we report integration of monolayer molybdenum disulphide with silicon nitride microresonators assembled by visco-elastic layer transfer techniques. Evanescent coupling from the resonator mode to the monolayer is confirmed through measurements of cavity transmission. The absorption of the monolayer semiconductor flakes in this geometry is determined to be 850 dB/cm, which is larger than that of graphene and black phosphorus with the same thickness. This technique can be applied to diverse monolayer semiconductors for assembling hybrid optoelectronic devices such as photodetectors and modulators operating over a wide spectrum range.

36 MATERIALS SCIENCE↗

Enhanced photoresponsivity in graphene-silicon slow-light photonic crystal waveguides

We demonstrate the enhanced fast photoresponsivity in graphene hybrid structures by combining the ultrafast dynamics of graphene with improved light-matter interactions in slow-light photonic crystal waveguides. With a 200 μm interaction length, a 0.8 mA/W photoresponsivity is achieved in a graphene-silicon Schottky-like photodetector, with an operating bandwidth in excess of 5 GHz and wavelength range at least from 1480 nm to 1580 nm. Fourfold enhancement of the photocurrent is observed in the slow light region, compared to the wavelength far from the photonic crystal bandedge, for a chip-scale broadband fast photodetector.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

G-mode magnetic force microscopy: Separating magnetic and electrostatic interactions using big data analytics

In this work, we develop a full information capture approach for Magnetic Force Microscopy (MFM), referred to as generalized mode (G-Mode) MFM. G-Mode MFM acquires and stores the full data stream from the photodetector, captured at sampling rates approaching the intrinsic photodiode limit. The data can be subsequently compressed, denoised, and analyzed, without information loss. Here, G-Mode MFM is implemented and compared to the traditional heterodyne-based MFM on model systems, including domain structures in ferromagnetic Yttrium Iron Garnet and the electronically and magnetically inhomogeneous high entropy alloy, CoFeMnNiSn. We investigate the use of information theory to mine the G-Mode MFM data and demonstrate its usefulness for extracting information which may be hidden in traditional MFM modes, including signatures of nonlinearities and mode-coupling phenomena. Finally, we demonstrate detection and separation of magnetic and electrostatic tip-sample interactions from a single G-Mode image, by analyzing the entire frequency response of the cantilever. G-Mode MFM is immediately implementable on any atomic force microscopy platform and as such is expected to be a useful technique for probing spatiotemporal cantilever dynamics and mapping material properties, as well as their mutual interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface passivation of (100) GaSb using self-assembled monolayers of long-chain octadecanethiol

The passivation of (100) GaSb surface was investigated by means of the long-chain octadecanethiol (ODT) self-assembled monolayer (SAM). The properties of ODT SAM on (100) GaSb were characterized by the atomic force microscopy using Kelvin probe force microscopy mode and X-ray photoelectron spectroscopy. The chemical treatment of 10 mM ODT-C{sub 2}H{sub 5}OH has been applied to the passivation of a type-II superlattice InAs/GaSb photodetector. The electrical measurements indicate that the current density was reduced by one order of magnitude as compared to an unpassivated photodetector.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A picosecond beam-timing system for the OMEGA laser

Here, a timing system is demonstrated for the OMEGA Laser System that guarantees all 60 beams will arrive on target simultaneously with a root mean square variability of 4 ps. The system relies on placing a scattering sphere at the target position to couple the UV light from each beam into a single photodetector.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increasing sensitivity and angle-of-view of mid-wave infrared detectors by integration with dielectric microspheres

We observed up to 100 times enhancement of sensitivity of mid-wave infrared photodetectors in the 2–5 μm range by using photonic jets produced by sapphire, polystyrene, and soda-lime glass microspheres with diameters in the 90–300 μm range. By finite-difference time-domain (FDTD) method for modeling, we gain insight into the role of the microspheres refractive index, size, and alignment with respect to the detector mesa. A combination of enhanced sensitivity with angle-of-view (AOV) up to 20° is demonstrated for individual photodetectors. It is proposed that integration with microspheres can be scaled up for large focal plane arrays, which should provide maximal light collection efficiencies with wide AOVs, a combination of properties highly attractive for imaging applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contactless measurement of equilibrium electron concentrations in n -type InAs/InAs1−xSbx type-II superlattices

Measurements of the equilibrium majority carrier electron concentration (n0) in narrow-bandgap n-type InAs/InAs1−xSbx type-II superlattices are made using contactless time-resolved microwave reflectance (TMR). By calibrating TMR decays to the number of optically injected electron-hole pairs, direct conversion to carrier lifetimes as a function of excited carrier density is made and allowing for accurate measurement of n0. The temperature dependence of both n0 and the intrinsic carrier density (ni) are measured using this method, where n0 = 1 × 1015 cm−3 and ni = 1.74 × 1011 cm−3 at 100 K. These results provide non-destructive insight into critical parameters that directly determine infrared photodetector dark diffusion current.

Olson, B. V. (ORCID:0000000314212541)↗

Optical and electrical properties of two-dimensional palladium diselenide

Two-dimensional (2D) noble-metal dichalcogenides exhibit exceptionally strong thickness-dependent bandgaps, which can be leveraged in a wide variety of device applications. A detailed study of their optical (e.g., optical bandgaps) and electrical properties (e.g., mobilities) is important in determining potential future applications of these materials. Here, we perform detailed optical and electrical characterization of 2D PdSe 2 nanoflakes mechanically exfoliated from a single-crystalline source. Layer-dependent bandgap analysis from optical absorption results indicates that this material is an indirect semiconductor with bandgaps of approximately 1.37 and 0.50 eV for the monolayer and bulk, respectively. Spectral photoresponse measurements further confirm these bandgap values. Moreover, temperature-dependent electrical measurements of a 6.8-nm-thick PdSe 2 flake-based transistor show effective electron mobilities of 130 and 520 cm 2 V –1 s –1 at 300 K and 77 K, respectively. Finally, we demonstrate that PdSe 2 can be utilized for short-wave infrared photodetectors. A room-temperature specific detectivity (D * ) of 1.8 × 10 10 cm Hz 1/2 W –1 at 1 μm with a band edge at 1.94 μm is achieved on a 6.8-nm-thick PdSe 2 flake-based photodetector.

36 MATERIALS SCIENCE↗

Recording of pulsed currents by a fibre-optic Faraday effect-based sensor with limited frequency band

We have studied, experimentally and theoretically, the dependence of the amplitude and noise response parameters of a fibre-optic Faraday effect-based current sensor on the photodetector frequency band in recording rectangular current pulses, the duration of which does not exceed the time of light propagation through the sensing fibre. The presence of an optimal band at which the signal-to-noise ratio has a pronounced maximum is demonstrated. It is shown that the optimal bandwidth is close in magnitude to the inverse time of light passage through the fibre. The revealed feature is explained by the difference in dependences of the response amplitude and the white noise level of optical radiation on the frequency band of the photodetector. A technique for amplitude error correction at the optimal band is proposed. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verifying entanglement in the Hong-Ou-Mandel dip

The Hong-Ou-Mandel interference dip is caused by an entangled state, a delocalized biphoton state. We propose a method of detecting this entanglement by utilizing inverse Hong-Ou-Mandel interference, while taking into account vacuum and multiphoton contaminations, phase noise, and other imperfections. The method uses just linear optics and photodetectors, and for single-mode photodetectors we find a lower bound on the amount of entanglement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical qudit-type entanglement creation at long distances by means of small cross-Kerr nonlinearities

Entanglement represents an important resource for quantum information processing, but its generation itself requires physical resources that are limited. We propose a scheme for generating a wide class of entangled qudit-type states of optical field modes at sites separated by noisy medium when only weak optical nonlinearities are available at both sites. The protocol is also based on exploiting a weak probe field, transmitted between the sites and used for generation of quantum correlations between two spatially separated field modes. The idea of probabilistic entanglement enhancement by measurement is discussed and a corresponding scheme for measuring the probe field state with linear optics and photodetectors not resolving photon numbers is proposed. It is shown that the protocol is applicable in the case when limited efficiency and dark counts of photodetectors, decoherence, and uncertainty of nonlinear coupling constants are present.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the passive probing of fiber optic quantum communication channels

Avalanche photodetectors based on InGaAs:P are the most sensitive and only detectors operating in the telecommunication wavelength range 1.30-1.55 {mu}m in the fiber optic quantum cryptography systems that can operate in the single photon count mode. In contrast to the widely used silicon photodetectors for wavelengths up to 1 {mu}m operating in a waiting mode, these detectors always operate in a gated mode. The production of an electron-hole pair in the process of the absorption of a photon and the subsequent appearance of an avalanche of carriers can be accompanied by the inverse processes of the recombination and emission of photons. Such a backward emission can present a potential serious problem for the stability of fiber optic quantum cryptography systems against passive probing. The results of analyzing the detection of backscattered radiation are reported. The probability of such an emission has been estimated.

36 MATERIALS SCIENCE↗