Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Structure, Properties, and Theoretical Electronic Structure of UCuOP and Np3S5.

The compounds UCuOP and NpCuOP have been synthesized and their crystal structures were determined from low-temperature single-crystal X-ray data. These isostructural compounds crystallize with two formula units in space group P4/nmm of the tetragonal system. Each An atom (An = U or Np) is coordinated to four O and four P atoms in a distorted square antiprism; each Cu atom is coordinated to four P atoms in a distorted tetrahedron. Magnetic susceptibility measurements on crushed single crystals indicate that UCuOP orders antiferromagnetically at 224(2) K. Neutron diffraction experiments at 100 and 228 K show the magnetic structure of UCuOP to be type AFI ( - -) where ferromagnetically aligned sheets of U atoms in the (001) plane order antiferromagnetically along [001]. The electrical conductivity of UCuOP exhibits metallic character. Its electrical resistivity measured in the ordered region with the current flowing within the tetragonal plane is governed by the scattering of the conduction electrons on antiferromagnetic spin-wave excitations. The electrical resistivity of single-crystalline NpCuOP shows semimetallic character. It is dominated by a pronounced hump at low temperatures, which likely arises owing to long-range magnetic ordering below about 90 K. Density of state analyses using the local spin-density approximation show covalent overlap between AnO and CuP layers of the structure and dominant contributions from 5f-actinide orbitals at the Fermi level. Calculations on a 2 2 2 supercell of NpCuOP show ferromagnetic ordering within the Np sheets and complex coupling between these planes. Comparisons of the physical properties of these AnCuOP compounds are made with those of the family of related tetragonal uranium phosphide compounds.

Wells, Daniel M.↗

Device Architecture and Lifetime Requirements for High Efficiency Multicrystalline Silicon Solar Cells

We present a numerical simulation study of different multicrystalline silicon materials and solar cell architectures to understand today's efficiency limitations and future efficiency possibilities. We compare conventional full-area BSF and PERC solar cells to future cell designs with a gallium phosphide heteroemitter. For all designs, mc-Si materials with different excess carrier lifetime distributions are used as simulation input parameters to capture a broad range of materials. The results show that conventional solar cell designs are sufficient for generalized mean lifetimes between 40 – 90 μs, but do not give a clear advantage in terms of efficiency for higher mean lifetime mc-Si material because they are often limited by recombination in the phosphorus diffused emitter region. Heteroemitter designs instead increase in cell efficiency considerable up to generalized mean lifetimes of 380 μs because they are significantly less limited by recombination in the emitter and the bulk lifetime becomes more important. In conclusion, to benefit from increasing mc-Si lifetime, new cell designs, especially heteroemitter, are desirable.

14 SOLAR ENERGY↗

Discovery of Giant, Non-saturating Thermopower in Topological Semimetal at Quantum Limit

Thermoelectrics are promising by directly generating electricity from waste heat. However, (sub-) room-temperature thermoelectrics have been a long-standing challenge, due to the vanishing electronic entropy at low temperature. Topological materials offer a new avenue for energy harvesting applications. Recent theories predicted that topological Weyl semimetals (WSMs) at the quantum limit can lead to a non-saturating longitudinal thermopower, as well as a quantized thermoelectric Hall conductivity approaching to a universal value. Here, we experimentally demonstrate the non-saturating thermopower and the signature of quantized thermoelectric Hall conductivity in WSM tantalum phosphide (TaP). An ultrahigh longitudinal thermopower Sxx = 1.1x10 3 muV/K, along with a power factor ~500 muW/cm/K 2 , are observed ~40K. Moreover, the thermoelectric Hall conductivity develops a plateau at high-fields and low temperatures, which further collapses onto a single curve determined by universal constants. Our work highlights the unique WSM electronic structure and topological protection of Weyl nodes toward low-temperature energy harvesting applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On-PIC Light Source Integration & Micro-dispensing of Solder Paste for Flip Chip Application

To reach the next level benefits of photonic integrated circuits (PICs), the Integrated Photonic Systems Roadmap-International describes the necessity of either heterogeneous or hybrid integration of light sources [1]. A new approach for hybrid integration is Photonic Wire Bonding where 3D nanolithography is used to pattern a polymer waveguide that connects light sources to PIC waveguides. The waveguides resemble electrical wire bonds and essentially do the same as their electrical counterpart for packaging photonic chips together. In order to reap the full benefits of a photonic wire bonds, the light source must be carefully packaged. In this work I seek to expand RIT’s photonic packaging capability by establishing a packaging process to integrate light sources, specifically an Indium Phosphide distributed feedback lasers and a reflective semiconductor optical amplifiers, directly onto a photonic integrated circuits. Another necessary requirement for PIC packaging is densely integrated electrical connectivity. In this thesis I developed a fine pitch flip chip interconnect technique demonstrated using gold stud bumps in conjunction with micro-dispensed solder paste. This work opens the door to high density photonic flip chip applications. The micro-dispensed solder paste dots having diameters 50-125 µm are currently being tested at a pitch of 150 µm . The gold stud bumps are formed with 1mil gold wire creating bumps with a diameter of 40-60 µm depending on specific parameter values. These capabilities will allow RIT to assemble and test novel photonic integrated devices, cutting down on the time and cost associated with third party assembly and tests facilities. Thereby keeping RIT at the forefront of photonic research.

Wongk, Nicole↗

Hetero-doped Nanotubes: Theory, Synthesis and Characterization of Phosphorus-Nitrogen Doped Multiwalled Carbon Nanotubes

Arrays of multiwalled carbon nanotubes doped with phosphorous and nitrogen are synthesized using a solution of ferrocene and triphenyl-phosphine in benzylamine in conjunction with spray pyrolysis. We demonstrate that iron phosphide (Fe3P) nanoparticles act as catalysts during nanotube growth, leading to the formation of novel PN-doped multiwalled carbon nanotubes. The samples produced were examined by SEM, HRTEM and STEM, as well as high-resolution elemental analyses using EELS and EDX spectroscopy, and their chemical stability was explored by means of thermogravimetric analysis in the presence of oxygen. The results reveal striking differences when compared to other types of doped nanotubes. These types of hetero-doped nanotubes with the underlying theory and synthesis are predicted to offer great opportunities in the fabrication of fast responsive chemical sensors.

Sumpter, Bobby G↗

Evidence for a Nodal-Line Superconducting State in LaFePO

In several iron-arsenide superconductors there is strong evidence for a fully gapped superconducting state consistent with either a conventional s-wave symmetry or an unusual s{sub {+-}} state where the gap changes sign between the electron and hole Fermi-surface sheets. Here we report measurements of the penetration depth {lambda}(T) in very clean samples of the related iron-phosphide superconductor, LaFePO, at temperatures down to {approx}100mK. We find that {lambda}(T) varies approximately linearly with T strongly suggesting the presence of gap nodes in this compound. Taken together with other data, this suggests the gap function is not universal for all pnictide superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi surface of SrFe2P2 determined by de Haas-van Alphen effect

We report measurements of the Fermi surface (FS) of the ternary iron-phosphide SrFe{sub 2}P{sub 2} using the de Haas-van Alphen effect. The calculated FS of this compound is very similar to SrFe{sub 2}As{sub 2}, the parent compound of the high temperature superconductors. Our data show that the Fermi surface is composed of two electron and two hole sheets in agreement with bandstructure calculations. Several of the sheets show strong c-axis warping emphasizing the importance of three-dimensionality in the non-magnetic state of the ternary pnictides. We find that the electron and hole pockets have a different topology, implying that this material does not satisfy a ({pi},{pi}) nesting condition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nickel deficiency in RENi{sub 2-x}P{sub 2} (RE=La, Ce, Pr). Combined crystallographic and physical property studies

Large single crystals from RENi{sub 2-x}P{sub 2} (RE=La, Ce, Pr) were synthesized from the pure elements using Sn as a metal flux, and their structures were established by X-ray crystallography. The title compounds were confirmed to crystallize in the body-centered tetragonal ThCr{sub 2}Si{sub 2} structure type (space group I4/mmm (No. 139); Pearson's symbol tI10), but with a significant homogeneity range with respect to the transition metal. Systematic synthetic work, coupled with accurate structure refinements indicated strong correlation between the degree of Ni-deficiency and the reaction conditions. According to the temperature dependent dc magnetization measurements, LaNi{sub 2-x}P{sub 2} (x=0.30(1)), as expected, is Pauli-like paramagnetic in the studied temperature regime, while the Ce-analog CeNi{sub 2-x}P{sub 2} (x=0.28(1)) shows the characteristics of a mixed valent Ce{sup 3+}/Ce{sup 4+} system with a possible Kondo temperature scale on the order of 1000 K. For three different PrNi{sub 2-x}P{sub 2} (x<=0.5) samples, the temperature and field dependence of the magnetization indicated typical local moment 4f-magnetism and a stable Pr{sup 3+} ground state, with subtle variations of T{sub C} as a function of the concentration of Ni defects. Field-dependent heat capacity data for CeNi{sub 2-x}P{sub 2} (x=0.28(1)) and PrNi{sub 2-x}P{sub 2} (x=0.53(1)) are discussed as well. - Graphical abstract: The non-stoichiometric RENi{sub 2-x}P{sub 2} phases (RE=La, Ce, Pr), whose average structure belongs to the ThCr{sub 2}Si{sub 2} type, are shown to exist with a wide range of defects on the transition metal site. The changes in the Ni-underoccupancy affect the magnetism of the synthesized materials.

36 MATERIALS SCIENCE↗

Segregation and formation of MnP particles during rapid thermal annealing of Mn-implanted InP and GaP

We have studied the structural and magnetic properties of Mn implanted (1-5x10{sup 16} cm{sup -2}, 200 keV) into InP and GaP substrates, before and after rapid thermal annealing. As revealed by Rutherford backscattering spectrometry, secondary ion mass spectrometry, and transmission electron microscopy measurements, implantation results in an amorphous surface layer 300 nm deep, and subsequent annealing gives rise to epitaxial recrystallization of this layer accompanied by a segregation of most of the Mn into clusters about 60 nm in diameter at the surface. Magnetic measurements indicate ferromagnetic behavior only for the annealed samples with T{sub C} close to 290 K, characteristic of bulk MnP, whose presence is confirmed by diffraction data. In addition, there is no evident dependence of the magnetic and structural properties on the doping type or level of the substrates.

36 MATERIALS SCIENCE↗

Light-splitting photovoltaic system utilizing two dual-junction solar cells

There are many difficulties limiting the further development of monolithic multi-junction solar cells, such as the growth of lattice-mismatched material and the current matching constraint. As an alternative approach, the light-splitting photovoltaic system is investigated intensively in different aspects, including the energy loss mechanism and the choice of energy bandgaps of solar cells. Based on the investigation, a two-dual junction system has been implemented employing lattice-matched GaInP/GaAs and InGaAsP/InGaAs cells grown epitaxially on GaAs and InP substrates, respectively. (author)

14 SOLAR ENERGY↗

Fabrication-tolerant 1310 nm laterally-coupled distributed feedback lasers with high side mode suppression ratios

A laterally-coupled distributed feedback (LC-DFB) laser was designed and fabricated using stepper lithography. Such DFB lasers eliminate the need of the commonly required re-growth steps in a conventional DFB laser fabrication process. With LC-DFB lasers, the grating can be lithographically patterned out of the ridge waveguide. High order gratings can enhance the lithographic tolerance for lower resolution patterning, yielding lasers more amenable to mass-manufacturing. 1310 nm InGaAsP/InP LC-DFB laser with third-order gratings was fabricated using i-line 5x stepper lithography. Excellent side mode suppression ratio over 52 dB has been measured with a single mode lasing around 1310 nm.

36 MATERIALS SCIENCE↗

Large bandgap blueshifts in the InGaP/InAlGaP laser structure using novel strain-induced quantum well intermixing

We report on a novel quantum well intermixing (QWI) technique that induces a large degree of bandgap blueshift in the InGaP/InAlGaP laser structure. In this technique, high external compressive strain induced by a thick layer of SiO{sub 2} cap with a thickness ≥1 μm was used to enhance QWI in the tensile-strained InGaP/InAlGaP quantum well layer. A bandgap blueshift as large as 200 meV was observed in samples capped with 1-μm SiO{sub 2} and annealed at 1000 °C for 120 s. To further enhance the degree of QWI, cycles of annealing steps were applied to the SiO{sub 2} cap. Using this method, wavelength tunability over the range of 640 nm to 565 nm (∼250 meV) was demonstrated. Light-emitting diodes emitting at red (628 nm), orange (602 nm), and yellow (585 nm) wavelengths were successfully fabricated on the intermixed samples. Our results show that this new QWI method technique may pave the way for the realization of high-efficiency orange and yellow light-emitting devices based on the InGaP/InAlGaP material system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of Polycrystalline CdSiP{sub 2} in a Gradient Temperature Field

A procedure for the synthesis of a CdSiP{sub 2} compound from the initial elementary components in a gradient thermal field has been developed. The phase and chemical composition of the synthesized and recrystallized material is confirmed by the data of X-ray diffraction analysis and scanning electron microscopy with an energy-dispersive system. The polycrystalline material obtained by the developed method will be used to grow bulk nonlinear optical CdSiP{sub 2} crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Process of Optical Damage of ZnGeP{sub 2} Crystals Using Digital Holography

A method of visualization of the process of optical damage of a ZnGeP{sub 2} single crystal using digital holography is suggested. The mechanism of the ZnGeP{sub 2} single crystal damage is investigated at energy density ~0.3–0.6 J/cm{sup 2}. The temperature in the damage channel during its formation is estimated. The data obtained allow the conclusion on the thermal nature of ZnGeP{sub 2} crystal damage to be made under the action of laser radiation with a wavelength of ~2.1 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of MnPS{sub 3} for hydrogen sorption

Single phase MnPS{sub 3} powder was prepared by solid state reaction between Mn, S and P carried out at 650 deg. C in evacuated silica tube. The structure, morphology and sorption characteristics of the prepared solid were investigated. The results revealed that the obtained MnPS{sub 3} compound was capable of adsorbing 3.5 wt% hydrogen at -193 deg. C and a pressure of 30 bar. Little amount of hydrogen (0.07 wt%) was adsorbed at room temperature. The hydrogen adsorption/desorption cycles at various temperatures did not result in irreversible chemical structural changes of the MnPS{sub 3} compound, but the microstructure after hydrogen cycling diminished and became finer. - Graphical abstract: Atomic building of MPS{sub 3}

36 MATERIALS SCIENCE↗

Nonstoichiometry of ZnGeP{sub 2} crystals probed by static tensimetric method

Abstracts: The nonstoichiometry of ZnGeP{sub 2} has been determined based on the p-T dependences measured above ZnP{sub 2}-Ge samples in the temperature range of 980-1225 K by a high-sensitive and precise tensimetric static method with a quartz Bourdon gauge. Scanning of the compositional range 49-51 mol% ZnP{sub 2} in the closed system and construction of the p-T dependences were possible due to incongruent evaporation of ZnGeP{sub 2} and formation of volatile species Zn(g), P{sub 4}(g) and P{sub 2}(g). The maximum homogeneity range of the solid ZnGeP{sub 2} was determined between 50.03 and 49.61 mol% ZnP{sub 2} at a temperature of 1128 K, based on the inflection points on the p-T dependences, corresponding to transitions of the three-phase (solid-solid-vapor) equilibrium to a two-phase (solid-vapor) one and vice visa. The nonstoichiometry as the overall concentration of defects is considered to gain a better insight into the defect chemistry of ZnGeP{sub 2}. - Graphical abstract: The nonstoichiometry of ZnGeP{sub 2} on the T-x diagram of the ZnP{sub 2}-Ge system.

36 MATERIALS SCIENCE↗

Magnetic behavior of MnPS{sub 3} phases intercalated by [Zn{sub 2}L]{sup 2+} (LH{sub 2}: macrocyclic ligand obtained by condensation of 2-hydroxy-5-methyl-1,3-benzenedicarbaldehyde and 1,2-diaminobenzene)

The intercalation of the cationic binuclear macrocyclic complex [Zn{sub 2}L]{sup 2+} (LH{sub 2}: macrocyclic ligand obtained by the template condensation of 2-hydroxy-5-methyl-1,3-benzenedicarbaldehyde and 1,2-diaminobenzene) was achieved by a cationic exchange process, using K{sub 0.4}Mn{sub 0.8}PS{sub 3} as a precursor. Three intercalated materials were obtained and characterized: (Zn{sub 2}L){sub 0.05}K{sub 0.3}Mn{sub 0.8}PS{sub 3}(1), (Zn{sub 2}L){sub 0.1}K{sub 0.2}Mn{sub 0.8}PS{sub 3}(2) and (Zn{sub 2}L){sub 0.05}K{sub 0.3}Mn{sub 0.8}PS{sub 3}(3), the latter phase being obtained by an assisted microwave radiation process. The magnetic data permit to estimate the Weiss temperature {theta} of {approx}-130 K for (1); {approx}-155 K for (2) and {approx}-130 K for (3). The spin canting present in the potassium precursor remains unperturbed in composite (3), and spontaneous magnetization is observed under 50 K in both materials. However composites (1) and (2) do not present this spontaneous magnetization at low temperatures. The electronic properties of the intercalates do not appear to be significantly altered. The reflectance spectra of the intercalated phases (1), (2) and (3) show a gap value between 1.90 and 1.80 eV, lower than the value observed for the K{sub 0.4}Mn{sub 0.8}PS{sub 3} precursor of 2.8 eV. -- Graphical Abstract: Microwave assisted synthesis was used to obtain an intercalated MnPS{sub 3} phase with a binuclear Zn(II) macrocyclic complex. A comparative magnetic study of the composites obtained by assisted microwave and traditional synthetic methods is reported. Display Omitted Highlights: {yields} A rapid and efficient preparation of intercalated MnPS{sub 3} composites by assisted microwave synthesis is described. {yields} The exchange of potassium ions of the precursor by the macrocyclic Zn(II) complex is partial. {yields} The composite obtained by assisted microwave synthesis retains the spontaneous magnetization, observed in the low temperature range of the magnetic susceptibility of the potassium precursor. {yields} The materials obtained by the conventional method loose the spontaneous magnetization in the low temperature range, which appears in the magnetic behaviour of the potassium precursor.

36 MATERIALS SCIENCE↗