Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALLADIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

The hydrogenation of Dy{sub 5}Pd{sub 2} followed by in situ methods

The hydrogenation behavior of the intermetallic compound Dy{sub 5}Pd{sub 2} was investigated by means of ex situ X-ray powder diffraction, in situ neutron powder diffraction and in situ differential scanning calorimetry. The structural model of Dy{sub 5}Pd{sub 2} with a palladium atom at the 32(e) position x, x, x (x Almost-Equal-To 0.22, 7/8 occupation) and a dysprosium atom at almost the same location (x Almost-Equal-To 0.18, 1/8 occupation) is confirmed. Upon heating the latter approaches x(Pd) and at T=399 K both positional parameters are indistinguishable. Dy{sub 5}Pd{sub 2} does not incorporate hydrogen (deuterium) into its crystal structure, however, starting at T=495 K reacts with hydrogen to non stoichiometric dysprosium dideuteride, DyD{sub 2+x}, following a parabolic rate law. In situ differential scanning calorimetry at various hydrogen pressures up to 2.5 MPa shows strongly exothermic signals, whose temperature onset depend on the gas pressure, corresponding to the formation of a mainly ionic hydride (DyH{sub 2+x}). - Graphical abstract: The hydrogenation of Dy5Pd2 is being followed by in situ neutron diffraction. Highlights: Black-Right-Pointing-Pointer Dy5Pd2 does not form a ternary hydride upon hydrogenation. Black-Right-Pointing-Pointer Dy5Pd2 decomposes to binary hydrides of dysprosium and palladium. Black-Right-Pointing-Pointer At T{>=}399 K Dy3 and Pd in the crystal structure of Dy5Pd2 share the same position. Black-Right-Pointing-Pointer The formation of DyD2+x at T=495 K and p(D2)=2.5 MPa follows a parabolic rate law.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supercritical CO{sub 2} mediated synthesis and catalytic activity of graphene/Pd nanocomposites

Highlights: • RGO/Pd composite was efficiently prepared via a facile method in supercritical CO{sub 2}. • Graphene sheets were coated uniformly with Pd nanoparticles with a size of ∼8 nm. • Composites exhibited excellent catalytic activity in the Suzuki reaction even after 10 cycles. - Abstract: Graphene sheets were decorated with palladium nanoparticles using a facile and efficient method in supercritical CO{sub 2}. The nanoparticles were formed on the graphene sheets by the simple hydrogen reduction of palladium(II) hexafluoroacetylacetonate precursor in supercritical CO{sub 2}. The product was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. Highly dispersed nanoparticles with various sizes and shapes adhered well to the graphene sheets. The composites showed high catalytic activities for the Suzuki reaction under aqueous and aerobic conditions within 5 min. The effects of the different Pd precursor loadings on the catalytic activities of the composites were also examined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

PdAu/YSZ composite hydrogen separation membranes with enhanced stability in the presence of CO

The effects of gold composition on the tolerance of palladium-based composite membranes to CO exposure was studied under the presence of high CO concentrations. Membranes with PdAu compositions ranging up to 41% by mass were exposed to binary 50/50 H 2 /CO gas atmospheres and both hydrogen flux and purity were monitored over time. It was observed that the highest gold composition (41%) suffered no degradation in membrane performance in terms of permeate hydrogen purity and hydrogen permeation flux during the 48 h exposure. Furthermore, for lower gold compositions, X-ray diffraction patterns suggested that carbon entered the film and could be removed by exposure to a non-CO containing gas mixture over time. However, removal of the carbon adversely affected purity; interestingly, some of the purity decline could be reversed upon re-exposure to the CO gas mixture. It is hypothesized that carbon loading in the palladium films causes lattice expansion and may even fill pore defects, thus lowering leaks through the Pd films. Furthermore, this study suggests that a membrane exposed to a CO mixture should not be cycled between CO and non-CO environments, but rather run continuously for best performance. Additionally, the choice of Pd-alloy and metal composition should be considered in regard to its carbon solubility to best predict lifetime performance.

08 HYDROGEN↗

Comparison of Designs of Hydrogen Isotope Separation Columns by Numerical Modeling

Mixtures of gas-phase hydrogen isotopologues (diatomic combinations of protium, deuterium, and tritium) can be separated using columns containing a solid such as palladium that reversibly absorbs hydrogen. A temperature-swing process can transport hydrogen into or out of a column by inducing temperature-dependent absorption or desorption reactions. Here, we consider two designs: a thermal cycling absorption process, which moves hydrogen back and forth between two columns, and a simulated moving bed (SMB), where columns are in a circular arrangement. We present a numerical mass and heat transport model of absorption columns for hydrogen isotope separation. It includes a detailed treatment of the absorption–desorption reaction for palladium. By comparing the isotope concentrations within the columns as a function of position and time, we observe that SMB can lead to sharper separations for a given number of thermal cycles by avoiding the remixing of isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Surface Chemistry of Methanol on Cu 3 Pd(111): Effects of Metal Alloying and Reaction with Hydrogen

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the adsorption and surface chemistry of methanol on a Cu 3 Pd(111) model surface. The composition and morphological properties of the pristine Cu 3 Pd(111) substrate were analyzed using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and low-energy ion scattering (LEIS). The results of ion scattering showed segregation of Pd toward the surface, with a Pd/Cu ratio close to 0.5, a larger value than the ratio of 0.33 expected for a Cu 3 Pd bimetallic structure. The surface of the alloy exhibited a good LEED pattern with three-fold long-range periodicities. In STM, clusters of palladium with hexagonal arrays and Pd- Pd distances of 2.7-2.8 Å were detected. Bonding to copper perturbed the electronic properties of the atoms in the Pd clusters, shifting their 4d states toward higher binding energy with respect to the Fermi level. Further, the valence band spectrum of Cu 3 Pd(111) exhibited a line shape that was very different from those displayed by Cu(111) or Pd(111). At low pressures, the adsorption of methanol on Cu 3 Pd(111) at 300 K mainly produced CH 3 O, CO and CH x species. AP-XPS showed that most Pd atoms in the surface of the Cu 3 Pd(111) alloy interacted with the decomposition products of methanol. No significant changes were observed in the core levels of copper upon the adsorption and dissociation of methanol, suggesting that the molecule mainly interacted with Pd sites of the alloy. Reaction with hydrogen led to fast removal of CH x , C and PdC x species from Cu 3 Pd(111) at moderate (< 450 K) temperatures and prevented a CH x → C transformation. If the stability of adsorbed CH 3 O is used as a descriptor for the hydrogenation of CO 2 to methanol, Cu 3 Pd should be a much better catalyst than monometallic palladium. This may be a consequence of electronic and ensemble effects in the alloy that moderate the reactivity of Pd sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ X-ray Scattering and Dynamical Modeling of Pd Catalyst Nanoparticles Formed in Flames

It has previously been demonstrated that organopalladium precursors can break down under combustion conditions, forming nanoparticles that catalyze ignition. Here, we use in situ small-angle X-ray scattering (SAXS) to probe the formation and growth of palladium nanoparticles in an ethylene fl ame doped with 28 ppm (mol) of Pd(acetate) 2 . The particles appear to nucleate in the fl ame front and are observed by SAXS to grow in size and mass in the high-temperature region of the fl ame ( ~ 2200 K) with median diameters that evolve from 1.5 to 3.0 nm. Transmission electron microscopy of particles collected on a grid located outside the fl ame shows that the particles are metallic palladium with sizes comparable to those determined by SAXS. Molecular dynamics simulation of particles of selected sizes indicates that at the fl ame temperature the particles are molten and the average mass density of the particle material is notably smaller than that of bulk, liquid Pd at the melting point. Both experimental and computational results point to homogeneous nucleation and particle - particle coalescence as mechanisms for particle formation and growth. Aerosol dynamics simulation reproduces the time evolution of the particle size distribution and suggests that a substantial fraction of the particles must be electrically charged during their growth process.

36 MATERIALS SCIENCE↗

PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen

Electrocatalytic conversion of nitrate in waste can enable efficient waste remediation (NO 3 - to N 2 ) or waste valorization (NO 3 - to NH 4 + ) depending on the selectivity of the catalyst. Palladium and copper electrocatalysts typically exhibit ideal nitrate and nitrite binding properties, allowing for effective destruction of nitrate. However, rational steering of selectivity through material design remains a critical challenge for PdCu electrocatalyst. Here, we use the electrochemical underpotential deposition method to synthesize palladium nanocube electrocataysts with controlled copper surface coverage (e.g., partial and full copper coatings). We then examine the potential for NO 3 - destruction (conversion) and NO 2 - reduction reaction. We identify that partial copper-coated Pd nanocubes not only effectively facilitate the reduction of 95% of NO 3 - but also increase the reduction of NO 2 - to N 2 with 89% selectivity over 20 consecutive cycles (80 h). We also show that under these conditions, the Pd(100) surface facet is exposed. Complete copper-covered Pd nanocubes effectively facilitate the reduction of ~99% of NO 3 - . Complete coverage of copper; however, prevented exposure of Pd(100) surface facet, promoting the selective reduction of NO 2 - to NH 4 + with a 70% selectivity over 20 consecutive cycles (80 h). Density functional theory (DFT) calculations show that NO 3 - and NO 2 - adsorb more strongly on the Cu(100) surface compared to the Pd(100) surface, while the NO* intermediate generated from NO 3 - or NO 2 - reduction adsorbs more strongly on the Pd surface. Furthermore, barrier calculations show that NO* can readily migrate from the Cu domain to the Pd domain and that the N–N coupling barrier on Pd is significantly diminished at high NO* coverage. Together, these results suggest that the high N 2 selectivity observed on the PdCu electrocatalyst is caused by the spillover of NO* from the Cu domains to the Pd domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Observation of Directed Nanoparticle Aggregation During the Synthesis of Ordered Nanoporous Metal in Soft Templates

The prevalent approach to developing new nanomaterials is a trial and error process of iteratively altering synthesis procedures and then characterizing the resulting nanostructures. This is fundamentally limited in that the growth processes that occur during synthesis can only be inferred from the final synthetic structure. Directly observing real-time nanomaterial growth provides unprecedented insight into the relationship between synthesis conditions and product evolution, and facilitates a mechanistic approach to nanomaterial development. Here we use in situ liquid stage scanning transmission electron microscopy to observe the growth of mesoporous palladium in a solvated block copolymer (BCP) template under various synthesis conditions, and ultimately determine a refined synthesis procedure that yields ordered pores. We find that at low organic solvent (tetrahydrofuran, THF) content, the BCP assembles into a rigid, cylindrical micelle array with a high degree of short-range order, but poor long-range order. Upon slowing the THF evaporation rate using a solvent-vapor anneal step, the long-range order is greatly improved. The electron beam induces nucleation of small particles in the aqueous phase around the micelles. The small particles then flocculate and grow into denser structures that surround the micelles, forming an ordered mesoporous structure. The microscope observations revealed that template disorder can be addressed prior to reaction, and is not invariably induced by the growth process itself, allowing us to more quickly optimize the synthetic method. This work was conducted in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy under contract DE-AC05-76RL01830. This research was funded in part by: the Presidential Early Career Award for Scientist and Engineers for I.A., the University of California Academic Senate and the University of California Laboratory fee research grant, the Laboratory-Directed Research and Development program at Sandia National Laboratories, and the Chemical Imaging Initiative at Pacific Northwest National Laboratory. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

cylindrical micelle↗

Functionalized Silicone Nanospheres: Synthesis, Transition Metal Immobilization, and Catalytic Applications

Silicone nanospheres containing a variety of functional groups (pyridines, phosphines, thiols, amines, etc.) have been prepared by emulsion copolymerization of methyltrimethoxysilane, MeSi(OMe)3, and the functionalized monomer of interest, RSi(OMe)3. This procedure provides a reproducible synthesis of spherical particles in the 12-28 nm size regime as determined by transmission electronSilicone nanospheres containing a variety of functional groups (pyridines, phosphines, thiols, amines, etc.) have been prepared by emulsion copolymerization of methyltrimethoxysilane, MeSi(OMe)₃, and the functionalized monomer of interest, RSi(OMe)₃. This procedure provides a reproducible synthesis of spherical particles in the 12-28 nm size regime as determined by transmission electron microscopy (TEM). The presence of the functional groups is supported by a combination of spectroscopic methods including DRUV-vis, DRIFTS, and NMR spectroscopy. Comonomer dispersity within the nanospheres was probed using elemental mapping techniques, and these support a homogeneous distribution of functional groups within the particles. Palladium(0) immobilization on phosphine-substituted nanospheres also results in a random distribution of the transition metal throughout the particles. Nanospheres containing multiple acid/base functionalities were also prepared, and these demonstrate functional group cooperativity based on enhanced conversions in the base-catalyzed Henry reaction, relative to nanosphere catalysts containing only basic groups. The diversity of functional groups that may be incorporated into the spheres suggests that these materials hold considerable promise as ligand supports and catalysts.Graphene nanoribbons (GNRs) have been suggested as a promising material for its use as nanoelectromechanical reasonators for highly sensitive force, mass, and charge detection. Therefore the accurate determination of the size-dependent elastic properties of GNRs is desirable for the design of graphene-based nanoelectromechanical devices. In this study we determine the size-dependent Young’s modulus and carbon-carbon binding energy in a homologous series of GNRs, C4n2+6n+2H6n+4 (n=2–12), with the use of all electron first principles computations. An unexpected linearity between the binding energy and Young’s modulus is observed, making possible the prediction of the size-dependent Young’s modulus of GNRs through a single point energy calculation of the GNR ground state. A quantitative-structure-property relationship is derived, which correlates Young’s modulus to the total energy and the number of carbon atoms within the ribbon. In the limit of extended graphene sheets we determine the value of Young’s modulus to be 1.09 TPa, in excellent agreement with experimental estimates derived for graphite and suspended grapheme sheets. microscopy (TEM). The presence of the functional groups is supported by a combination of spectroscopic methods including DRUV-vis, DRIFTS, and NMR spectroscopy. Comonomer dispersity within the nanospheres was probed using elemental mapping techniques, and these support a homogeneous distribution of functional groups within the particles. Palladium(0) immobilization on phosphine-substituted nanospheres also results in a random distribution of the transition metal throughout the particles. Nanospheres containing multiple acid/base functionalities were also prepared, and these demonstrate functional group cooperativity based on enhanced conversions in the base-catalyzed Henry reaction, relative to nanosphere catalysts containing only basic groups. The diversity of functional groups that may be incorporated into the spheres suggests that these materials hold considerable promise as ligand supports and catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando Spectroscopic and Kinetic Characterization of Aerobic Allylic C–H Acetoxylation Catalyzed by Pd(OAc) 2 /4,5-Diazafluoren-9-one

Allylic C–H acetoxylations are among the most widely studied palladium(II)-catalyzed C–H oxidation reactions. While the principal reaction steps are well established, key features of the catalytic mechanisms are poorly characterized, including the identity of the turnover-limiting step and the catalyst resting state. In this study, we report a mechanistic study of aerobic allylic acetoxylation of allylbenzene with a catalyst system composed of Pd(OAc) 2 and 4,5-diazafluoren-9-one (DAF). The DAF ligand is unique in its ability to support aerobic catalytic turnover, even in the absence of benzoquinone or other co-catalysts. Herein, we describe operando spectroscopic analysis of the catalytic reaction using X-ray absorption and NMR spectroscopic methods that allow direct observation of the formation and decay of a palladium(I) species during the reaction. Kinetic studies reveal the presence of two distinct kinetic phases: (1) a burst phase, involving rapid formation of the allylic acetoxylation product and formation of the dimeric Pd I complex [Pd I (DAF)(OAc)] 2 , followed by (2) a post-burst phase that coincides with evolution of the catalyst resting state from the Pd I dimer into a π-allyl-Pd II species. The data provide unprecedented insights into the role of ancillary ligands in supporting catalytic turnover with O 2 as the stoichiometric oxidant and establish an important foundation for the development of improved catalysts for allylic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface synergism and engineering of Pd/Co@N-C for direct ethanol fuel cells

Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials’ physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm -2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.

25 ENERGY STORAGE↗

Fabrication of size-selected Pd nanoclusters using a magnetron plasma sputtering source

We report on the fabrication of palladium (Pd) nanoclusters using a dc magnetron sputtering source. Plasma sputtering vaporizes the target's material forming nanoclusters by inert gas condensation. The sputtering source produces ionized nanoclusters that enable the study of the nanoclusters' size distribution using a quadrupole mass filter. In this work, the dependence of Pd nanoclusters' size distribution on various source parameters, such as the sputtering discharge power, inert gas flow rate, and aggregation length have been investigated. This work demonstrates the ability of tuning the palladium nanoclusters' size by proper optimization of the source operation conditions. The experimental nanocluster sizes are compared with a theoretical model that reveals the growth of large nanoclusters from 'embryos' by a two-body collision. The model is valid for a specific range of deposition parameters (low inert gas flow rates and aggregation lengths equal or below 70 mm).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Laser-induced rocket force on a microparticle in a complex (dusty) plasma

The interaction of a focused powerful laser beam with micron-sized melamine formaldehyde (MF) particles was studied experimentally. The microspheres had a thin palladium coating on their surface and were suspended in a radio frequency argon plasma as a single layer (plasma crystal). A particle hit by the laser beam usually accelerated in the direction of the laser beam, consistent with the radiation pressure force mechanism. However, random-direction acceleration up to the speeds on the order 1 m/s was sometimes observed. Rocket-force mechanism is proposed to account for the random-direction acceleration. Similar, but much less pronounced, effect was also observed for MF particles without palladium coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependent dual hydrogen sensor response of Pd nanoparticle decorated Al doped ZnO surfaces

Sputter deposited Al doped ZnO (AZO) thin films exhibit a dual hydrogen sensing response in the temperature range 40 °C–150 °C after surface modifications with palladium nanoparticles. The unmodified AZO films showed no response in hydrogen in the temperature range 40 °C–150 °C. The operational temperature windows on the low and high temperature sides have been estimated by isolating the semiconductor-to-metal transition temperature zone of the sensor device. The gas response pattern was modeled by considering various adsorption isotherms, which revealed the dominance of heterogeneous adsorption characteristics. The Arrhenius adsorption barrier showed dual variation with change in hydrogen gas concentration on either side of the semiconductor-to-metal transition. A detailed analysis of the hydrogen gas response pattern by considering the changes in nano palladium due to hydrogen adsorption, and semiconductor-to-metal transition of nanocrystalline Al doped ZnO layer due to temperature, along with material characterization studies by glancing incidence X-ray diffraction, atomic force microscopy, and transmission electron microscopy, are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adlayer structure dependent ultrafast desorption dynamics in carbon monoxide adsorbed on Pd (111)

We report our ultrafast photoinduced desorption investigation of the coverage dependence of substrate–adsorbate energy transfer in carbon monoxide adlayers on the (111) surface of palladium. As the CO coverage is increased, the adsorption site population shifts from all threefold hollows (up to 0.33 ML), to bridge and near bridge (>0.5 to 0.6 ML) and finally to mixed threefold hollow plus top site (at saturation at 0.75 ML). We show that between 0.24 and 0.75 ML this progression of binding site motifs is accompanied by two remarkable features in the ultrafast photoinduced desorption of the adsorbates: (i) the desorption probability increases roughly two orders magnitude, and (ii) the adsorbate–substrate energy transfer rate observed in two-pulse correlation experiments varies nonmonotonically, having a minimum at intermediate coverages. Simulations using a phenomenological model to describe the adsorbate–substrate energy transfer in terms of frictional coupling indicate that these features are consistent with an adsorption-site dependent electron-mediated energy coupling strength, η{sub el}, that decreases with binding site in the order: three-fold hollow > bridge and near bridge > top site. This weakening of η{sub el} largely counterbalances the decrease in the desorption activation energy that accompanies this progression of adsorption site motifs, moderating what would otherwise be a rise of several orders of magnitude in the desorption probability. Within this framework, the observed energy transfer rate enhancement at saturation coverage is due to interadsorbate energy transfer from the copopulation of molecules bound in three-fold hollows to their top-site neighbors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functionalized PdAu Alloy on Nanocones Fabricated on Optical Fibers for Hydrogen Sensing

This paper reports the development of fiber optical hydrogen sensors using palladium and gold alloy nanostructures as sensor materials for hydrogen measurements using a D-shaped fiber as a platform. Using a maskless reactive ion etching technique, silica nanocone structures were formed on the surface of the D-shaped fiber. Palladium and gold alloys were deposited on the surface of nanostructured D-shaped fiber to form a nano-alloy sensor film. Evanescent interaction between guided light propagated in the fiber core and nano-alloy enabled highly sensitive hydrogen detection from concentrations that ranged from 0.25% to 10% in atmosphere pressure. Here, the formation of nanostructured alloy enabled by the nanocone surface led to more than 3 times faster in sensor response time and significant improvements in sensor sensitivity and reversibility. The work presented here demonstrates that highly controllable VLSI microfabrication schemes can be applied to produce nanostructured sensor films on optical fibers for high-sensitivity chemical sensing.

47 OTHER INSTRUMENTATION↗

Helium nanobubble release from Pd surface: An atomic simulation

Molecular dynamic simulations of helium atoms escaping from a helium-filled nano-bubble near the surface of crystalline palladium reveal unexpected behavior. Significant deformation and cracking near the helium bubble occur initially, and then a channel forms between the bubble and the surface, providing a pathway for helium atoms to propagate towards the surface. The helium atoms erupt from the bubble in an instantaneous and volcano-like process, which leads to surface deformation consisting of cavity formation on the surface, along with modification and atomic rearrangement at the periphery of the cavity. The present simulation results show that, near the palladium surface, there is a helium-bubble-free zone, or denuded zone, with a typical thickness of about 3.0 nm. Combined with experimental measurements and continuum-scale evolutionary model predictions, the present atomic simulations demonstrate that the thickness of the denuded zone, which contains a low concentration of helium atoms, is somewhat larger than the diameter of the helium bubbles in the metal tritide. Furthermore, a relationship between the tensile strength and thickness of metal film is also determined.

36 MATERIALS SCIENCE↗

Isotope exchange kinetics in metal hydrides I : TPLUG model.

A one-dimensional isobaric reactor model is used to simulate hydrogen isotope exchange processes taking place during flow through a powdered palladium bed. This simple model is designed to serve primarily as a platform for the initial development of detailed chemical mechanisms that can then be refined with the aid of more complex reactor descriptions. The one-dimensional model is based on the Sandia in-house code TPLUG, which solves a transient set of governing equations including an overall mass balance for the gas phase, material balances for all of the gas-phase and surface species, and an ideal gas equation of state. An energy equation can also be solved if thermodynamic properties for all of the species involved are known. The code is coupled with the Chemkin package to facilitate the incorporation of arbitrary multistep reaction mechanisms into the simulations. This capability is used here to test and optimize a basic mechanism describing the surface chemistry at or near the interface between the gas phase and a palladium particle. The mechanism includes reversible dissociative adsorptions of the three gas-phase species on the particle surface as well as atomic migrations between the surface and the bulk. The migration steps are more general than those used previously in that they do not require simultaneous movement of two atoms in opposite directions; this makes possible the creation and destruction of bulk vacancies and thus allows the model to account for variations in the bulk stoichiometry with isotopic composition. The optimization code APPSPACK is used to adjust the mass-action rate constants so as to achieve the best possible fit to a given set of experimental data, subject to a set of rigorous thermodynamic constraints. When data for nearly isothermal and isobaric deuterium-to-hydrogen (D {yields} H) and hydrogen-to-deuterium (H {yields} D) exchanges are fitted simultaneously, results for the former are excellent, while those for the latter show pronounced deviations at long times. These discrepancies can be overcome by postulating the presence of a surface poison such as carbon monoxide, but this explanation is highly speculative. When the method is applied to D {yields} H exchanges intentionally poisoned by known amounts of CO, the fitting results are noticeably degraded from those for the nominally CO-free system but are still tolerable. When TPLUG is used to simulate a blowdown-type experiment, which is characterized by large and rapid changes in both pressure and temperature, discrepancies are even more apparent. Thus, it can be concluded that the best use of TPLUG is not in simulating realistic exchange scenarios, but in extracting preliminary estimates for the kinetic parameters from experiments in which variations in temperature and pressure are intentionally minimized.

99 GENERAL AND MISCELLANEOUS↗