Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Enhanced room temperature magnetoresistance in p−La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/SrTiO{sub 3}/n−Si heterostructure: A possible spintronics application

An experimental study of p−La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/SrTiO{sub 3}/n−Si heterostructure in which La{sub 0.7}Ca{sub 0.3}MnO{sub 3} (LCMO) and Si are separated by a thin interfacial SrTiO{sub 3} (STO) layer with typical thickness ∼ 15 nm, has been in situ fabricated with the pulsed laser deposition technique. The junction exhibits good rectifying diode like behavior over the temperature range of 10 - 300 K. The heterostructure also exhibits metal-oxide-semiconductor like behavior with all type of possible current flow mechanisms through the heterojunction. The junction magnetoresistance (JMR) (∼ 30% at 300 K) properties of p-LCMO/STO/n-Si heterostructure have been studied over the temperature range of 100-300 K. The JMR is positive and strongly depends on temperature at an applied forward bias voltage of 3 V. The relation between JMR and external magnetic field is found to be Δρ/ρ≈ α H{sup β} type, having both α and β temperature dependent. We attribute the emergence of positive JMR to the quantum mechanical tunneling transport mechanism across the heterojunction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural properties and gas sensing behavior of sol-gel grown nanostructured zinc oxide

In this communication, we report the results of the studies on structural properties and gas sensing behavior of nanostructured ZnO grown using acetone precursor based modified sol-gel technique. Final product of ZnO was sintered at different temperatures to vary the crystallite size while their structural properties have been studied using X-ray diffraction (XRD) measurement performed at room temperature. XRD results suggest the single phasic nature of all the samples and crystallite size increases from 11.53 to 20.96 nm with increase in sintering temperature. Gas sensing behavior has been studied for acetone gas which indicates that lower sintered samples are more capable to sense the acetone gas and related mechanism has been discussed in the light of crystallite size, crystal boundary density, defect mechanism and possible chemical reaction between gas traces and various oxygen species.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical behavior and non-universal low-field magnetic scaling in La{sub 1-x}Bi{sub x}MnO{sub 3} (x=0.4 & 0.6) perovskite manganite oxide

We report on critical behavior in La{sub 1-x}Bi{sub x}MnO{sub 3} (x=0.4 & 0.6) perovskite manganite oxide by studying AC susceptibility, χ, measured at randomly chosen low magnetic fields (H=9.45 Oe to 0.95 Oe) at fixed frequency of f=131 Hz. The samples exhibit non-uniformity in their magnetic spin interactions around paramagnetic-to-ferromagnetic transition temperature (T{sub C}). By non-universal low-field magnetic scaling of AC χ given as, χ{sup −1}-χ{sup −1}(T{sub C}) ∼ (T/T{sub C}−1){sup γ} ≡ τ{sup γ} the magnetic interactions in the samples around T{sub C} has been studied. The linear fit to ln (χ{sup −1} - χ{sub C}{sup −1}) vs. ln (T/T{sub C}-1) gives the values of critical exponent ‘γ’ under applied magnetic fields. The values of γ is found to be ∼1.48±0.007 for the sample with x=0.4 and ∼1.36±0.004 for x=0.6 at 0.95 Oe lie in the context of 3D Heisenberg type spin interactions. The profound 3D Heisenberg type spin interactions arises due to the phase separation effect for x=0.4 and breaking of ferromagnetic order and induced Bi{sup 3+} (6S{sup 2}) − O{sup 2−} (2P{sup 6}) lattice distortions for x=0.6 as discussed in manuscript.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Status of Chronic Oxidation Studies of Graphite

Graphite will undergo extremely slow, but continuous oxidation by traces of moisture that will be present, albeit at very low levels, in the helium coolant of HTGR. This chronic oxidation may cause degradation of mechanical strength and thermal properties of graphite components if a porous oxidation layer penetrates deep enough in the bulk of graphite components during the lifetime of the reactor. The current research on graphite chronic oxidation is motivated by the acute need to understand the behavior of each graphite grade during prolonged exposure to high temperature chemical attack by moisture. The goal is to provide the elements needed to develop predictive models for long-time oxidation behavior of graphite components in the cooling helium of HTGR. The tasks derived from this goal are: (1) Oxidation rate measurements in order to determine and validate a comprehensive kinetic model suitable for prediction of intrinsic oxidation rates as a function of temperature and oxidant gas composition; (2) Characterization of effective diffusivity of water vapor in the graphite pore system in order to account for the in-pore transport of moisture; and (3) Development and validation of a predictive model for the penetration depth of the oxidized layer, in order to assess the risk of oxidation caused damage of particular graphite grades after prolonged exposure to the environment of helium coolant in HTGR. The most important and most time consuming of these tasks is the measurement of oxidation rates in accelerated oxidation tests (but still under kinetic control) and the development of a reliable kinetic model. This report summarizes the status of chronic oxidation studies on graphite, and then focuses on model development activities, progress of kinetic measurements, validation of results, and improvement of the kinetic models. Analysis of current and past results obtained with three grades of showed that the classical Langmuir-Hinshelwood model cannot reproduce all data collected so far. Starting from here we propose a modification of the LH model to include temperature activation of graphite surface as a Boltzmann activation function. The enhanced Boltzmann-Langmuir-Hinshelwood model (BLH) was tested successfully on three grades of graphite. The model is a robust, comprehensive mathematical function that allows better fitting of experimental results spanning a wide range of temperature and partial pressures of water vapor and hydrogen. However, the model did not fit satisfactorily the data extracted from the old report on graphite H-451 oxidation by water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Electronic Conductivity by Controlled Self-Doping in Pyrochlores

Most 5d transition-metal (TM) pyrochlores exhibit metallic behavior, but 3d and 4d TM pyrochlores are generally electronic semiconductors or insulators. Here, we report a semiconductor–metal transition induced by introducing excess Ti metal as interstitials into Y2Ti2O7. These Ti interstitials prefer anion vacant 8a sites or bridge sites between two neighboring cations along the h010i direction. Density functional theory calculations suggest that an increased electronic conductivity originates from the interplay between the extra Ti and its neighboring cations. These findings suggest a means for achieving metallic behavior in semiconducting pyrochlore oxides and tuning the electronic conduction in pyrochlores for their electrochemical applications in solid oxide fuel cells.

Environmental Molecular Sciences Laboratory↗

Revealing atomic-to-nanoscale oxidation mechanisms of metallic materials

Oxidation and corrosion are the leading causes of degradation and failure of metallic materials. Future alloy development requires the incorporation of corrosion resistance into alloy design and processing, and this begins with attaining a fundamental insight into dynamic reaction mechanisms and kinetics between a metal and aggressive environments. With recent advances in environmental transmission electron microscopy, there have been increased efforts to apply this approach to atomically probe the microscopic mechanisms that govern the oxidation and corrosion behavior of metallic materials. Consequently, fundamental insights have been obtained in understanding the underlying processes of oxidation and passivation, including active sites, surface restructuring, oxide/metal interface dynamics, and microstructure and phase evolution. Additionally, we discuss on-going and future developments that are expected to significantly advance the field of high-temperature oxidation and corrosion.

25 ENERGY STORAGE↗

δ -Doping of oxygen vacancies dictated by thermodynamics in epitaxial SrTiO 3 films

Homoepitaxial SrTiO 3 (110) film is grown by molecular beam epitaxy in ultra-high vacuum with oxygen diffusing from substrate as the only oxidant. The resulted oxygen vacancies (V O s ) are found to be spatially confined within few subsurface layers only, forming a quasi-two-dimensional doped region with a tunable high concentration. Such a δ-function distribution of V O s is essentially determined by the thermodynamics associated with the surface reconstruction, and facilitated by the relatively high growth temperature. Here, our results demonstrate that it is feasible to tune V O s distribution at the atomic scale by controlling the lattice structure of oxide surfaces. Transition metal oxide interfaces have exhibited a variety of novel phenomena, including the high-mobility two-dimensional electron gas, superconductivity and unusual magnetism. While these phenomena are inherently related to the artificially designed architecture, oxygen vacancies (V O s ) are recognized to be particularly important in determining the exotic behaviors of the oxides systems. As electron donors in oxides, V O s were observed to be one of the major factors for the high carrier density at the LaAlO 3 /SrTiO 3 interface. V O s induce ferromagnetism in the epitaxial LaCoO 3 films via the ordering of excess electrons in Co 3d orbit. It was also suggested that the existence of V O s plays an important role in the formation of undesirable insulating phase in ultrathin films of many metallic oxide materials, referred to as the “dead layer” behavior. How V O s are involved in such complex phenomena is still unclear. One essential issue toward the design of emergent properties of oxide films is how to characterize and control V O s at the atomic scale. Recently, quantitative measurements of V O concentration have been realized with high spatial resolution benefited by the development of the state-of-the-art aberration-corrected scanning transmission microscope (STEM) and related spectroscopy techniques. However, tuning the V O density precisely by growth control is still extremely challenging. Different oxidants, i.e., molecular O 2 , O 3 and atomic O, have been used with different feeding pressure during the growth. This approach is limited by thermodynamics of the material since the pressure of oxidant has to coordinate with temperature and other parameters in order to ensure the formation of the desired phase. In many cases the optimal condition for oxygen stoichiometry cannot be reached, and residual V O s are inevitably formed. It has been reported that V O s even form inhomogeneous clusters in SrTiO 3 (STO) films. Post annealing is another thermodynamic approach and seems to be effective to reduce the V O density. However, it does not allow the precise control of V O s distribution at the atomic scale either. In the current work, to study the control of V O s at the atomic scale, we grow SrTiO 3 homoepitaxial films along the polar [110] direction. Atomically well-defined (4 × 1) reconstruction is maintained on the surface all through the growth [see Fig. 1 (a) and (b)], which compensates the polarity. More importantly, the energy configuration associated with the surface reconstruction results in the spatial confinement of V O s within only few subsurface layers of the film, while their concentration remains extremely low on the topmost surface and in the bulk of STO substrate. In conclusion, we show that such a quasi-two-dimensional (2D) V O -doped layer, mimicking the δ-doping case in conventional semiconductors, can be precisely controlled.

36 MATERIALS SCIENCE↗

In Situ Oxidation and Associated Mass-Flux-Reduction/Mass-Removal Behavior for Systems with Organic Liquid Located in Lower-Permeability Sediments

The effectiveness of permanganate for in situ chemical oxidation of organic liquid (trichloroethene) trapped in lower-permeability (K) zones located within a higher-permeability matrix was examined in a series of flow-cell experiments. The permanganate solution was applied in both continuous and pulsed-injection modes. Manganese-oxide precipitation, as confirmed by use of SEM-EDS, occurred within, adjacent to, and downgradient of the lower-K zones, reflective of trichloroethene oxidation. During flow interruptions, precipitate formed within the surrounding higher-permeability matrix, indicating diffusive flux of aqueous-phase trichloroethene from the lower-K zones. The impact of permanganate treatment on mass flux behavior was examined by conducting water floods after permanganate injection. The results were compared to those of water-flood control experiments. The amount of water flushing required for complete contaminant mass removal was reduced for all permanganate treatments for which complete removal was characterized. However, the nature of the mass-flux-reduction/mass-removal relationship observed during water flooding varied as a function of the specific permanganate treatment.

58 GEOSCIENCES↗

Dramatic effect of oxide on measured liquid metal rheology

Liquid metals have traditionally been treated as Newtonian liquids, but several researchers have recently suggested that some metals may shear thin. While apparent shear thinning can be caused by surface oxidation, the reports of shear-thinning metals were investigated using cup and bob type rheometers, which are expected to only be weakly impacted by the surface contamination effects. We show here that even small amounts of oxide on the surface of liquid metals can cause dramatic changes to the measured viscosity of the sample. Using a Searle-type rotational rheometer, we measured the viscosity of eutectic gallium indium and tin in a low-oxygen environment. When either metal is slightly oxidized, the measured viscosity increases by orders of magnitude and the liquid displays erroneous shear-thinning behavior. When the oxide is removed via an active flux, the measured viscosity is Newtonian. The findings outlined here provide insight into the difficulties of measuring the viscosity of easily oxidized liquids and confirm that liquid metals are likely best described as Newtonian liquids at all measured shear rates.

36 MATERIALS SCIENCE↗

Molecular Orientations Change Reaction Kinetics and Mechanism: A Review on Catalytic Alcohol Oxidation in Gas Phase and Liquid Phase on Size-Controlled Pt Nanoparticles

Catalytic oxidation of alcohols is an essential process for energy conversion, production of fine chemicals and pharmaceutical intermediates. Although it has been broadly utilized in industry, the basic understanding for catalytic alcohol oxidations at a molecular level, especially under both gas and liquid phases, is still lacking. In this paper, we systematically summarized our work on catalytic alcohol oxidation over size-controlled Pt nanoparticles. The studied alcohols included methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol. The turnover rates of different alcohols on Pt nanoparticles and also the apparent activation energy in gas and liquid phase reactions were compared. The Pt nanoparticle size dependence of reaction rates and product selectivity was also carefully examined. Water showed very distinct effects for gas and liquid phase alcohol oxidations, either as an inhibitor or as a promoter depending on alcohol type and reaction phase. A deep understanding of different alcohol molecular orientations on Pt surface in gas and liquid phase reactions was established using sum-frequency generation spectroscopy analysis for in situ alcohol oxidations, as well as density functional theory calculation. This approach can not only explain the entirely different behaviors of alcohol oxidations in gas and liquid phases, but can also provide guidance for future catalyst/process design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New stable ternary alkaline-earth metal Pb(II) oxides: Ca / Sr / BaPb 2 O 3 and BaPbO 2

The different but related chemical behaviors of Pb(II) oxides compared to Sn(II) oxides, and the existence of known alkali/alkali-earth metal Sn(II) ternary phases, suggest that there should be additional ternary Pb(II) oxide phases. Here, we report structure searches on the ternary alkaline-earth metal Pb(II) oxides leading to four new phases. These are two ternary Pb(II) oxides, SrPb 2 O 3 and BaPb 2 O 3 , which have larger chemical potential stability ranges compared with the corresponding Sn(II) oxides, and additionally two other ternary Pb(II) oxides, CaPb 2 O 3 and BaPbO 2 , for which there are no corresponding Sn(II) oxides. Those Pb(II) oxides are stabilized by Pb-rich conditions. These structures follow the Zintl behavior and consist of basic structural motifs of (PbO 3 ) 4- anionic units separated and stabilized by the alkaline-earth metal ions. They show wide band gaps ranging from 2.86 to 3.12 eV, and two compounds (CaPb 2 O 3 and SrPb 2 O 3 ) show rather light hole effective masses (around 2m 0 ). The valence band maxima of these compounds have a Pb-6s/O-2p antibonding character, which may lead to p-type defect (or doping) tolerant behavior. This then suggests alkaline-earth metal Pb(II) oxides may be potential p-type transparent conducting oxides.

36 MATERIALS SCIENCE↗

The effect of sulfur and zirconium Co-doping on the oxidation of NiCrAl

The adhesion behavior of Al2O3 scales formed on NiCrAl+Zr alloys was examined as a function of both sulfur and zirconium doping levels. In general, very high levels of zirconium were required to counteract the detrimental effects of sulfur. A sulfur-zirconium adherence map was constructed, as determined from the oxidation and spalling behavior in 1100 C cyclic tests. For low sulfur alloys, the amount of zirconium required for adherence at any given sulfur level can be described by Zr greater than 600 S sup 0.2 (in ppma). These results underscore the importance of sulfur to adhesion mechanisms and suggests that sulfur gettering is a first order effect of reactive element additions to MCrAl alloys.

Smialek, James L.↗

The effect of sulfur and zirconium co-doping on the oxidation of NiCrAl

The adhesion behavior of Al2O3 scales formed on NiCrAl+Zr alloys was examined as a function of both sulfur and zirconium doping levels. In general, very high levels of zirconium were required to counteract the detrimental effects of sulfur. A sulfur-zirconium adherence map was constructed, as determined from the oxidation and spalling behavior in 1100 C cyclic tests. For low sulfur alloys (less than 500 ppma), the amount of zirconium required for adherence at any given sulfur level can be described by Zr greater than 600 S(0.2) (in ppma). These results underscore the importance of sulfur to adhesion mechanisms and suggest that sulfur gettering is a first order effect of reactive element additions to MCrAl alloys.

Smialek, James L.↗

Application of chemical structure and bonding of actinide oxide materials for forensic science

We are interested in applying our understanding of actinide chemical structure and bonding to broaden the suite of analytical tools available for nuclear forensic analyses. Uranium- and plutonium-oxide systems form under a variety of conditions, and these chemical species exhibit some of the most complex behavior of metal oxide systems known. No less intriguing is the ability of AnO{sub 2} (An: U, Pu) to form non-stoichiometric species described as AnO{sub 2+x}. Environmental studies have shown the value of utilizing the chemical signatures of these actinide oxide materials to understand transport following release into the environment. Chemical speciation of actinide-oxide samples may also provide clues as to the age, source, or process history of the material. The scientific challenge is to identify, measure and understand those aspects of speciation of actinide analytes that carry information about material origin and history most relevant to forensics. Here, we will describe our efforts in material synthesis and analytical methods development that we will use to provide the fundamental science to characterize actinide oxide molecular structures for forensic science. Structural properties and initial results to measure structural variability of uranium oxide samples using synchrotron-based X-ray Absorption Fine Structure will be discussed.

36 MATERIALS SCIENCE↗

Molecular forensic science of nuclear materials

We are interested in applying our understanding of actinide chemical structure and bonding to broaden the suite of analytical tools available for nuclear forensic analyses. Uranium- and plutonium-oxide systems form under a variety of conditions, and these chemical species exhibit some of the most complex behavior of metal oxide systems known. No less intriguing is the ability of AnO{sub 2} (An: U, Pu) to form non-stoichiometric species described as AnO{sub 2+x}. Environmental studies have shown the value of utilizing the chemical signatures of these actinide oxides materials to understand transport following release into the environment. Chemical speciation of actinide-oxide samples may also provide clues as to the age, source, process history, or transport of the material. The scientific challenge is to identify, measure and understand those aspects of speciation of actinide analytes that carry information about material origin and history most relevant to forensics. Here, we will describe our efforts in material synthesis and analytical methods development that we will use to provide the fundamental science required to characterize actinide oxide molecular structures for forensics science. Structural properties and initial results to measure structural variability of uranium oxide samples using synchrotron-based X-ray Absorption Fine Structure will be discussed.

36 MATERIALS SCIENCE↗

Creep Behavior of Glass/Ceramic Sealant Used in Solid Oxide Fuel Cells

High operating temperature of solid oxide fuel cells require that sealant must function at high temperature between 600o and 900oC and in the oxidizing and reducing environments of fuel and air. It should be noted that creep deformation becomes relevant for a material when the operating temperature is near or exceeds half of its melting temperature (in degrees of Kelvin). The operating temperatures for most of the solid oxide fuel cells (SOFC) under development in the SECA program are around 800oC, which exceeds the glass transition temperature Tg for most glass ceramic materials. The goal of the study is to develop a creep model to capture the creep behavior of glass ceramic materials at high temperature and to investigate the effect of creep of glass ceramic sealant materials on stresses in glass seal and on the various interfaces of glass seal with other layers. The self-consistent creep models were incorporated into SOFC-MP and Mentat FC, and finite element analyses were performed to quantify the stresses in various parts. The stress in glass seals were released due to its creep behavior during the operating environments.

30 DIRECT ENERGY CONVERSION↗

Response of Simple, Model Systems to Extreme Conditions

The focus of the research was on the application of high-pressure/high-temperature techniques, together with intense energetic ion beams, to the study of the behavior of simple oxide systems (e.g., SiO 2 , GeO 2 , CeO 2 , TiO 2 , HfO 2 , SnO 2 , ZnO and ZrO 2 ) under extreme conditions. These simple stoichiometries provide unique model systems for the analysis of structural responses to pressure up to and above 1 Mbar, temperatures of up to several thousands of kelvin, and the extreme energy density generated by energetic heavy ions (tens of keV/atom). The investigations included systematic studies of radiation- and pressure-induced amorphization of high P-T polymorphs. By studying the response of simple stoichiometries that have multiple structural “outcomes”, we have established the basic knowledge required for the prediction of the response of more complex structures to extreme conditions. We especially focused on the amorphous state and characterized the different non-crystalline structure-types that result from the interplay of radiation and pressure. For such experiments, we made use of recent technological developments, such as the perforated diamond-anvil cell and in situ investigation using synchrotron x-ray sources. We have been particularly interested in using extreme pressures to alter the electronic structure of a solid prior to irradiation. We expected that the effects of modified band structure would be evident in the track structure and morphology, information which is much needed to describe theoretically the fundamental physics of track-formation. Finally, we investigated the behavior of different simple-oxide, composite nanomaterials (e.g., uncoated nanoparticles vs. core/shell systems) under coupled, extreme conditions. This provided insight into surface and boundary effects on phase stability under extreme conditions.

36 MATERIALS SCIENCE↗

Friction and wear of ceramics

The adhesion, friction, wear and lubricated behaviors of both oxide and non-oxide ceramics are reviewed. Ceramics are examined in contact with themselves, other harder materials and metals. Elastic, plastic and fracture behavior of ceramics in solid state contact is discussed. The contact load necessary to initiate fracture in ceramics is shown to be appreciably reduced with tangential motion. Both friction and wear of ceramics are anisotropic and relate to crystal structure as with metals. Grit size effects in two- and three-body abrasive wear are observed for ceramics. Both free energy of oxide formation and the d valence bond character of metals are related to the friction and wear characteristics for metals in contact with ceramics. Surface contaminants affect friction and adhesive wear. For example, carbon on silicon carbide and chlorine on aluminum oxide reduce friction while oxygen on metal surfaces in contact with ceramics increases friction. Lubrication increases the critical load necessary to initiate fracture of ceramics both in indentation and with sliding or rubbing.

Buckley, D. H.↗