Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Structural, Morphological and Optical properties of Sputtered Nickel oxide Thin Films

Nickel oxide (NiO) thin films have been deposited by dc reactive magnetron sputtering technique on glass substrates at various substrate temperatures in the range of 303 to 723 K. The influence of substrate temperature on structural, morphological, compositional and optical properties was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) and spectrophotometer studies. The structural properties of the films were strongly influenced by the substrate temperature. From the microstructural studies, fine and uniform grains were grown with RMS roughness of 9.4 nm at substrate temperature of 523 K. The optical results indicated that the optical transmittance of the films increases with increasing substrate temperature up to 523 K, thereafter decreases. The optical band of the films increases with substrate temperature initially, thereafter decreased at higher temperatures. The Highest optical transmittance of 60 % and optical band gap of 3.82 eV was observed in the present study.

36 MATERIALS SCIENCE↗

Measured and calculated optical property profiles in the mixed layer and free troposphere

Nearly simultaneous measurements of the physical and optical properties of mixed layer and free tropospheric aerosols near Boulder, Colorado, were made on several occasions using aircraft, balloon, and ground-based sensors. This effort (Front Range Lidar, Aircraft, and Balloon experiment (FRLAB)) was conducted with the purpose of obtaining a diverse, self-consistent data set that could be used for testing optical model calculations based on measured physical characteristics such as apparent size distribution, composition, and shape. It was found that even with the uncertainties involved, the model predictions are in good agreement with the measurements in the visible and near infrared wavelength regions. At CO2 lidar wavelengths there is considerably more uncertainty in both the calculated and measured values; however, within the estimated errors there appears to be satisfactory agreement except for the highest free tropospheric layer studied. The results also indicate that during FRLAB the aerosol in the boundary layer and free troposphere behaved as spherical particles for optical modeling purposes. The utility of the observations for determining the extinction-to-backscatter ratio relevant to aerosols in the boundary layer and free troposphere is described with typical measured values being in the 20 to 30 sr range.

Rosen, James M.↗

Study of blood plasma optical properties in mice grafted with Ehrlich carcinoma in the frequency range 0.1–1.0 THz

In the course of in vitro studies of blood of laboratory animals with progressing Ehrlich carcinoma, we have revealed the change of the blood plasma optical properties in the THz range, which can be used for developing the express diagnostics of the presence of oncological diseases. An applied software package is elaborated that allows the phantoms of biological samples having a complex structure to be numerically simulated and the parameters of the electromagnetic wave reflected from these samples in the THz frequency range to be calculated. (paper)

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Analysis of Martian atmospheric and surface optical properties between 4.4 and 5.1 microns

Spectra of several regions of Mars were taken by Blaney and McCord in Aug. of 1988 with the Cooled Grating Array Spectrometer (CGAS) at the NASA Infrared Telescope Facility (IRTF). The resulting spectra show several distinct absorption features at wavelengths between 4.4 and 5.1 microns. Many of these features can be attributed to gases in the Martian atmosphere, but others are more difficult to identify. To analyze these spectra more completely, we used a line-by-line multiple scattering model that was developed for studies of Venus night-side emission. This model includes all atmospheric and surface radiative processes that are known to be important on Mars, including absorption, emission, and multiple scattering by CO2, H2O, CO, and airborne dust, and a spectrally-dependent surface albedo. A Mie-scattering algorithm was used to derive dust optical properties from the optical constants of palagonic and basalt. Results from our preliminary efforts to simulate the spectra taken near Tharsis and Solis Planum are shown.

Crisp, Dave↗

The structural, electrical, and optical properties of hydrogenated chromium-doped CdO films

Cadmium oxide thin films doped with different amounts of chromium and annealed in hydrogen atmosphere have been grown on glass substrates by means of physical vapour deposition (PVD) method. The structural, electrical, and optical properties of the prepared Cr-doped CdO (CdO:Cr–H) films were systematically studied. The structural investigations show that the incorporated Cr ions mainly occupied locations in interstitial positions of CdO lattice. The bandgap engineer by Cr incorporation and hydrogenation were studied. The variations of the electrical parameters of CdO:Cr–H films with Cr incorporation and hydrogenation were investigated. It was established that among the investigated samples, the largest mobility and conductivity were measured with 1.5%:Cr–H film. Therefore, hydrogenated CdO:Cr films can be effectively used in different applications of near infrared-transparent-conducting-oxide (NIR-TCO). - Graphical abstract: Optoelectronic properties of synthesised chromium-doped CdO thin films. It was established that the largest mobility (53.4 cm{sup 2}/V.s) and conductivity (2136.8 S/cm) were measured in 1.5%:Cr–H doped CdO film. Therefore, such films can be effectively used in near infrared-transparent-conducting-oxide (NIR-TCO). - Highlights: • The properties of CdO films annealed in H{sub 2} gas were systematically studied. • Cr{sup 3+} ions most likely occupied interstitial locations in CdO lattice and as donors. • Improvement of conductivity parameters with Cr doping and H annealing. • Bandgap narrowing observed with Cd-doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of dissolved organic materials on turbid water optical properties and remote-sensing reflectance

The effects of dissolved organic materials on turbid-water optical properties are assessed, by means of field measurements and laboratory simulations in which upwelled reflectance, attenuation, absorption, and backscatter spectral properties at wavelengths from 450 to 800 nm are examined in relation to water chemistry. The data show that dissolved organic materials decrease upwelled reflectance from turbid waters, and that the decrease in reflectance is a nonlinear function of concentration with the largest gradients at low carbon concentrations, depending on wavelength. Upwelled reflectance is found to be highly correlated with two backscatter-absorption parameters used in some optical models, which are nonlinear with dissolved organic material concentration change.

Witte, W. G.↗

Sensitivity of Inherent Optical Properties from Ocean Reflectance Inversion Models to Satellite Instrument Wavelength Suites

The Earth science community seeks to develop climate data records (CDRs) from satellite measurements of ocean color, a continuous data record that now exceeds 20 years. Space agencies will launch additional instruments in the coming decade that will continue this data record, including the NASA PACE spectrometer. Inherent optical properties (IOPs) quantitatively describe the absorbing and scattering constituents of seawater and can be estimated from satellite-observed spectroradiometric data using semi-analytical algorithms (SAAs). SAAs exploit the contrasting optical signatures of constituent matter at spectral bands observed by satellite sensors. SAA performance, therefore, depends on the spectral resolution of the satellite spectroradiometer. A CDR spanning SeaWiFS, MODIS, OLCI, and PACE, for example, would include IOPs derived using varied wavelength suites if all available wavelengths were considered. Here, we explored differences in derived IOPs that stem simply from the use of (eight) different wavelength suites of input radiometric measurements. Using synthesized data and SeaWiFS Level-3 mission-long composites, we demonstrated equivalent SAA performance for all wavelength suites, but that IOP retrievals vary by several percent across wavelength suites and as a function of water type. The differences equate to roughly ≤ 6, 12, and 7% for a(sub dg)(443), a(sub ph)(443), and b(sub bp)(443), respectively, for waters with C(sub a) ≤ 1 mg -cu m. These values shrink for sensors with similar wavelength suites (e.g., SeaWiFS, MODIS, and MERIS) and rise to substantially larger values for higher C(sub a) waters. Our results also indicate that including 400 nm (in the case of OLCI) influences the derived IOPs, using longer wavelengths (>600 nm) influences the derived IOPs when there is a red signal, and, including additional spectral information shows potential for improved IOP estimation, but not without revisiting SAA parameterizations and execution. While modest in scope, we believe this study contributes to the knowledge base for CDR development. The implication of ignoring such an analysis as CDRs continue to be developed is a prolonged inability to distinguish between algorithmic and environmental contributions to trends and anomalies in the IOP time-series.

ocean color satellites↗

Electronic and Optical Properties of NiSi{sub 2}/Si Nanofilms

Optimum conditions for ion implantation and subsequent annealing for the fabrication of NiSi{sub 2}/Si (111) nanofilms with a thickness of 3.0–6.0 nm are determined. It is demonstrated that the energy-band parameters and optical properties typical of thick NiSi{sub 2} films start to set in at d = 5.0–6.0 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical properties of titanium dioxide nanotube arrays

We present experimental measurements and a theoretical analysis of the near UV to NIR optical properties of free standing titania nanotube arrays. An improved understanding of the optical physics of this type of nanostructure is important to several next generation solar energy conversion technologies. We measured the transmission, reflection, and absorption of the electromagnetic spectrum from 300 nm to 1000 nm (UV to NIR) of titania nanotube arrays. We measured the total, specular, and diffuse reflection and transmission using both single point detection and an integrating sphere spectrometer. We find that the transmission, but not the reflection, of light (UV to NIR) through the nanotube array is well-explained by classic geometric optics using an effective medium model taking into account the conical geometry of the nanotubes. For wavelengths shorter than ∼500 nm, we find the surprising result that the reflection coefficient for light incident on the open side of the nanotube array is greater than the reflection coefficient for light incident on the closed “floor” of the nanotube array. We consider theoretical models based on the eikonal approximation, photonic crystal band theory, and a statistical treatment of scattering to explain the observed data. We attribute the fact that light with wavelengths shorter than 500 nm is more highly reflected from the open than the closed tube side as being due to disorder scattering inside the nanotube array.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure formation in perfluoropentacene:diindenoperylene blends and its impact on transient effects in the optical properties studied in real-time during growth

We discuss the result of the competing effects of favourable intermolecular interactions and steric incompatibilities due to the size mismatch of perfluoropentacene (PFP) and diindenoperylene (DIP) on the structure formation and associated optical properties in mixed films. Using real-time grazing incidence X-ray diffraction we investigate the size of coherently scattering islands l{sub s} as a function of film thickness and mixing ratio. We find that for PFP:DIP 1:2 blends l{sub s} is by a factor of ∼4 smaller than in pure DIP films, while l{sub s} of the PFP:DIP 2:1 blends is not significantly reduced compared with pure PFP. Yet, we observe an increase in l{sub s} with film thickness for all of the samples, independent on the mixing ratio. In parallel with the structural characterization we investigate the evolution of the absorption spectra in the visible spectral range and its dependence on l{sub s} in situ during film growth using differential reflectance spectroscopy. We observe a surprisingly strong effect of changes in the structural order on the shape of ε{sub 2,} {sub xy}(E), evident by a pronounced evolution of characteristic peaks in the thickness range from 1.6 nm to 9.6 nm. The combined results of the real-time experiments allow to identify the thickness dependent crystal grain size as the origin of the observed transient effects in the absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ocean Optics Protocols for Satellite Ocean Color Sensor Validation: Inherent Optical Properties: Instruments, Characterizations, Field Measurements and Data Analysis Protocols - Volume 4

This document stipulates protocols for measuring bio-optical and radiometric data for the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities and algorithm development. The document is organized into 6 separate volumes as Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 4. Volume I: Introduction, Background and Conventions; Volume II: Instrument Specifications, Characterization and Calibration; Volume III: Radiometric Measurements and Data Analysis Methods; Volume IV: Inherent Optical Properties: Instruments, Characterization, Field Measurements and Data Analysis Protocols; Volume V: Biogeochemical and Bio-Optical Measurements and Data Analysis Methods; Volume VI: Special Topics in Ocean Optics Protocols and Appendices. The earlier version of Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 3 (Mueller and Fargion 2002, Volumes 1 and 2) is entirely superseded by the six volumes of Revision 4 listed above.

Mueller, J. L.↗

Spectral Optical Properties of Cu2ZnSnS4 Thin Film Between 0.73 and 6.5 eV

A polycrystalline Cu{sub 2}ZnSnS{sub 4} thin film was deposited on fused quartz by co-evaporation. The selected thickness was {approx}100 nm to avoid artifacts in its optical properties caused by thicker as-grown films. The composition and phase of the film were checked with x-ray fluorescence, Raman shift spectroscopy, scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. An improved spectroscopic ellipsometry methodology with two-side measurement geometries was applied to extract the complex dielectric function {var_epsilon} = {var_epsilon}{sub 1} + i{var_epsilon}{sub 2} of the Cu{sub 2}ZnSnS{sub 4} thin film between 0.73 and 6.5 eV. Five critical points were observed, at 1.32 (fundamental band gap), 2.92, 3.92, 4.96, and 5.62 eV, respectively. The {var_epsilon} spectra are in reasonable agreement with those from theoretical calculations.

14 SOLAR ENERGY↗

Study of nonlinear optical properties of TiO{sub 2} – polystyrene nanocomposite films

We consider an ex-situ prepared TiO{sub 2} − polystyrene (TiO{sub 2} − PS) nanocomposite, with different concentration of TiO{sub 2} nanoparticles (NPs), deposited by the spin-coating method on quartz substrates. Nonlinear optical properties of the TiO{sub 2} − PS nanocomposite films are studied using the Z-scan technique. Structural properties of the films are investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements. The optical band gap energy of the TiO{sub 2} − PS films are determined from the optical absorption spectra. The relation between the optical nonlinearities and the bandgap energy, as a microscopic electronic property of the semiconductor nanocomposite, is established. It is shown that an increase in the content of TiO{sub 2} NPs in the nanocomposite films results in bandgap narrowing and concomitant enhancement of optical nonlinearities. It is proposed that bandgap narrowing and enhancement of optical nonlinearities can be ascribed to the introduction of mid-gap states as a result of the formation of surface defects in TiO{sub 2} NPs. The results of this work indicate that incorporation of TiO{sub 2} NPs in the PS polymeric matrix can be a new way for bandgap narrowing of TiO{sub 2} NPs toward the visible light region, which is of great interest for their application in this part of the spectrum. Furthermore, enhancement of the optical nonlinearities of the spin-coated TiO{sub 2} − PS films by increasing the TiO{sub 2} NP content can open up new avenues for their use as nonlinear optical films in photonics applications. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Potassium doping: Tuning the optical properties of graphene quantum dots

Doping with hetero-atoms is an effective way to tune the properties of graphene quantum dots (GQDs). Here, potassium-doped GQDs (K-GQDs) are synthesized by a one-pot hydrothermal treatment of sucrose and potassium hydroxide solution. Optical properties of the GQDs are altered as a result of K-doping. The absorption peaks exhibit a blue shift. Multiple photoluminescence (PL) peaks are observed as the excitation wavelength is varied from 380 nm to 620 nm. New energy levels are introduced into the K-GQDs and provide alternative electron transition pathways. The maximum PL intensity of the K-GQDs is obtained at an excitation wavelength of 480 nm which is distinct from the undoped GQDs (375 nm). The strong PL of the K-GQDs at the longer emission wavelengths is expected to make K-GQDs more suitable for bioimaging and optoelectronic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonlinear optical properties of lanthanum titanate glasses prepared by levitation melting

Lanthanum titanate glasses (17 La 2 O 3 -83 TiO 2 ) are fabricated via aerodynamic levitation melting. Here, nonlinear refraction and absorption were measured with the Z scan technique using ps optical pulses at 532 nm wavelength with peak intensities in the range of 0.25–2.5 GW/cm 2 . The two-photon absorption coefficient (β) and the effective nonlinear refraction coefficient (⁠$n^{eff}_{2}$) are found to be, respectively, 2.19 cm/GW and 152 × 10 -16 cm 2 /W (85 × 10 -13 esu). The Raman gain is measured to be 106 × 10 -11 cm/W. The nonlinearity strength is found to be nearly 60 times larger in lanthanum titanate glasses relative to silica.

36 MATERIALS SCIENCE↗

Ab initio study on the effect of structural relaxation on the electronic and optical properties of P-doped Si nanocrystals

In contrast to the conventional doping of bulk silicon (Si), the doping of Si nanocrystals (NCs) that are often smaller than 5 nm in diameter may lead to serious structural changes. Since the electronic and optical properties of Si NCs are intimately associated with their structures, it is critical to understand how doping impacts the structures of Si NCs. By means of ab initio calculation we now compare 1.4 nm phosphorus (P)-doped Si NCs without structural relaxation and those with structural relaxation. Structural changes induced by structural relaxation are manifested by the stretching and compressing of bonds and apparent variations in bond angles. With the increase of the concentration of P structural changes induced by structural relaxation become more serious. It is found that structural relaxation makes differences in the energy-level schemes of P-doped Si NCs. Structural relaxation also causes the binding energy of an electron in a P-doped Si NC to more significantly increase as the concentration of P increases. With the increase of the concentration of P structural relaxation leads to more pronounced changes in the optical absorption of P-doped Si NCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and optical properties of Ag-doped copper oxide thin films on polyethylene napthalate substrate prepared by low temperature microwave annealing

Silver doped cupric oxide thin films are prepared on polyethylene naphthalate (flexible polymer) substrates. Thin films Ag-doped CuO are deposited on the substrate by co-sputtering followed by microwave assisted oxidation of the metal films. The low temperature tolerance of the polymer substrates led to the search for innovative low temperature processing techniques. Cupric oxide is a p-type semiconductor with an indirect band gap and is used as selective absorption layer solar cells. X-ray diffraction identifies the CuO phases. Rutherford backscattering spectrometry measurements confirm the stoichiometry of each copper oxide formed. The surface morphology is determined by atomic force microscopy. The microstructural properties such as crystallite size and the microstrain for (-111) and (111) planes are calculated and discussed. Incorporation of Ag led to the lowering of band gap in CuO. Consequently, it is determined that Ag addition has a strong effect on the structural, morphological, surface, and optical properties of CuO grown on flexible substrates by microwave annealing. Tauc's plot is used to determine the optical band gap of CuO and Ag doped CuO films. The values of the indirect and direct band gap for CuO are found to be 2.02 eV and 3.19 eV, respectively.

36 MATERIALS SCIENCE↗

Effect of RF Power on Structural, Magnetic, and Optical Properties of CoFe{sub 2}O{sub 4} Thin Films

The thin films of CoFe{sub 2}O{sub 4} were deposited on glass substrates by radio-frequency (RF) sputtering. The effect of RF power variation from 60–120 W on the structure, magnetic, and optical properties of the as-deposited films and films annealed at 500 °C was studied. The magnetic parameters of the film, i.e., in-plane coercivity (H{sub c}), saturation magnetization (M{sub s}), and remanence (M{sub r}) increase as RF power is increased from 60 to 80 W followed by a decreasing trend with further increase in RF power to 120 W. Annealing of the film significantly improves the magnetic properties. The largest grain size and the best crystallinity of the film are obtained for the film deposited at 80 W of RF power. The thin films exhibited 70–80% optical transmittance. Optical band gap (E{sub g}) depends on the RF power and grain size, and it varies between 2.08 and 2.16 eV for the as-deposited films and between 2.16 and 2.30 eV for the annealed films. The study shows that RF power used for depositing the film has strong effect on the microstructure and properties of the film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗