SEARCH · Engineering Papers

Results for “Object”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS2020

Multi-Objective Gust Load Alleviation Control Designs for an Aeroelastic Wind Tunnel Demonstration Wing

This paper presents several control and gust disturbance estimation techniques applied to a mathematical model of a physical flexible wing wind tunnel model used in ongoing tests at the University of Washington Aeronautical Laboratory's Kirsten Wind Tunnel. Three methods of gust disturbance estimation are presented, followed by three control methods: LQG, Basic Multi-Objective (BMO), and a novel Multi-Objective Prediction Correction (MOPC) controller. The latter of which augments a multi-objective controller, and attempts to correct for errors in the disturbance estimate. A simplified linear simulation of the three controllers is performed and a simple MIMO stability and robustness assessment is performed. Then, the same controllers are simulated in a higher fidelity Simulink environment that captures sampling, saturation and noise effects. This preliminary analysis indicates that the BMO controller provides the best performance and largest stability margins.

Drew, Michael C.↗

NASA NTRS2019

Initial Results from the New Horizons Exploration of 2014 MU69, a Small Kuiper Belt Object

The Kuiper Belt is a broad, torus-shaped region in the outer Solar System beyond Neptune’s orbit. It contains primordial planetary building blocks and dwarf planets. NASA’s New Horizons spacecraft conducted a flyby of Pluto and its system of moons on 14 July 2015. New Horizons then continued farther into the Kuiper Belt, adjusting its trajectory to fly close to the small Kuiper Belt object (486958) 2014 MU69 (henceforth MU69; also informally known as Ultima Thule). Stellar occultation observations in 2017 showed that MU69 was ~25 to 35 km in diameter, and therefore smaller than the diameter of Pluto (2375 km) by a factor of ~100 and less massive than Pluto by a factor of ~106. MU69 is located about 1.6 billion kilometers farther from the Sun than Pluto was at the time of the New Horizons flyby. MU69’s orbit indicates that it is a “cold classical” Kuiper Belt object, thought to be the least dynamically evolved population in the Solar System. A major goal of flying past this target is to investigate accretion processes in the outer Solar System and how those processes led to the formation of the planets. Because no small Kuiper Belt object had previously been explored by spacecraft, we also sought to provide a close-up look at such a body’s geology and composition, and to search for satellites, rings, and evidence of present or past atmosphere. We report initial scientific results and interpretations from that flyby.

S. A. Stern↗

NASA NTRSDate not supplied

Exploring Transfers Between Earth-Moon Halo Orbits via Multi-Objective Reinforcement Learning

Multi-Reward Proximal Policy Optimization, a multi-objective deep reinforcement learning algorithm, is used to examine the design space of low-thrust trajectories for a SmallSat transferring between two libration point orbits in the Earth-Moon system. Using Multi-Reward Proximal Policy Optimization, multiple policies are simultaneously and efficiently trained on three distinct trajectory design scenarios. Each policy is trained to create a unique control scheme based on the trajectory design scenario and assigned reward function: a unique combination of weights scaling competing objectives that guide the spacecraft to the target mission orbit, incentivize faster flight times, and penalize propellant mass usage. Then, the policies are evaluated on the same set of perturbed initial conditions in each scenario to generate the propellant mass usages, flight times, and state discontinuities from a reference trajectory for each control scheme. This solution space of low-thrust trajectories for a SmallSat is used to examine the multi-objective trade space for the trajectory design scenario. By autonomously constructing the solution space, insights into the required propellant mass, flight time, and transfer geometry are rapidly achieved.

Christopher J Sullivan↗

NASA NTRS2020

GW190814: Gravitational Waves from the Coalescence of a 23 Solar Mass Black Hole with a 2.6 Solar Mass Compact Object

We report the observation of a compact binary coalescence involving a 22.2–24.3 Me black hole and a compact object with a mass of 2.50–2.67Me (all measurements quoted at the 90% credible level). The gravitational-wavesignal, GW190814, was observed during LIGO’s and Virgo’s third observing run on 2019 August 14 at 21:10:39 UTC and has a signal-to-noise ratio of 25 in the three-detector network. The source was localized to18.5 deg2 at a distance of-+2414541Mpc; no electromagnetic counterpart has been confirmed to date. The source has the most unequal mass ratio yet measured with gravitational waves,-+0.1120.0090.008, and its secondary component is either the lightest black hole or the heaviest neutron star ever discovered in a double compact-object system. The dimensionless spin of the primary black hole is tightly constrained to 0.07. Tests of general relativity reveal no measurable deviations from the theory, and its prediction of higher-multipole emission is confirmed at high confidence. We estimate a merger rate density of 1–23 Gpc−3yr−1 for the new class of binary coalescence sources that GW190814 represents. Astrophysical models predict that binaries with mass ratios similar to this event can form through several channels, but are unlikely to have formed in globular clusters. However, the combination of mass ratio, component masses, and the inferred merger rate for this event challenges all current models of the formation and mass distribution of compact-object binaries.

Gravitational wave astronomy↗

NASA NTRS2020

Color, Composition, and Thermal Environment of Kuiper Belt Object (486958) Arrokoth

The New Horizons spacecraft flew past the Kuiper Belt object (486958) Arrokoth (also known as 2014 MU69) in January 2019. Because of the great distance to the outer Solar System and limited bandwidth, it will take until late 2020 to downlink all the spacecraft's observations back to Earth. Three papers in this issue analyze recently downlinked data, including the highest-resolution images taken during the encounter (see the Perspective by Jewitt). Spencer et al. examined Arrokoth's geology and geophysics using stereo imaging, dated the surface using impact craters, and produced a geomorphological map. Grundy et al. investigated the composition of the surface using color imaging and spectroscopic data and assessed Arrokoth's thermal emission using microwave radiometry. McKinnon et al. used simulations to determine how Arrokoth formed: Two gravitationally bound objects gently spiraled together during the formation of the Solar System. Together, these papers determine the age, composition, and formation process of the most pristine object yet visited by a spacecraft.

New Horizons spacecraft↗

NASA NTRS2021

Exploring Transfers Between Earth-Moon Halo Orbits via Multi-Objective Reinforcement Learning

Multi-Reward Proximal Policy Optimization, a multi-objective deep reinforcement learning algorithm, is used to examine the design space of low-thrust trajectories for a SmallSat transferring between two libration point orbits in the Earth- Moon system. Using Multi-Reward Proximal Policy Optimiza- tion, multiple policies are simultaneously and efficiently trained on three distinct trajectory design scenarios. Each policy is trained to create a unique control scheme based on the trajectory design scenario and assigned reward function: a unique combination of weights scaling competing objectives that guide the spacecraft to the target mission orbit, incentivize faster flight times, and penalize propellant mass usage. Then, the policies are evaluated on the same set of perturbed initial conditions in each scenario to generate the propellant mass usages, flight times, and state discontinuities from a reference trajectory for each control scheme. This solution space of low-thrust trajectories for a SmallSat is used to examine the multi-objective trade space for the trajectory design scenario. By autonomously constructing the solution space, insights into the required propellant mass, flight time, and transfer geometry are rapidly achieved.

Mashiku, Alinda K.↗

NASA NTRSDate not supplied

NASA’s Near-Earth Object Observations Program: Abbreviated History and Update

In the wake of Comet Shoemaker-Levy 9’s (D/1993 F2) collision with Jupiter, NASA’s Near-Earth Object (NEO) Observations Program was established more than two decades ago. The NEO Observations Program is responsible for finding, tracking, and characterizing NEOs. Since the Program’s inception in 1998, NASA-funded efforts have discovered more than 98% of the more than 30,000 NEOs currently known. This unique NASA Program supports several NEO surveys that contribute to a sustained and productive campaign to find and track NEOs; collecting data of sufficient precision to allow accurate predictions of the future trajectories of discovered objects. It is a key element of the Planetary Defense Coordination Office (PDCO). The Program also sponsors applied planetary science research conducted at NASA field centers, astronomical observatories, and other locations around the United States. The PDCO relies on data from projects supported by the NEO Observations Program which, in turn, also coordinates NEO observation efforts conducted at ground-based observatories sponsored by the National Science Foundation (NSF) and the space domain awareness facilities of the United States Space Force (USSF). PDCO’s current priority is the NEO Surveyor Mission (NEOSM) , launched away from the vicinity of Earth to SEL1 and working in coordination with large ground-based surveys could complete the NEO survey within a decade following launch. NEOSM’s has three primary mission objectives: - assess the current risk to the Earth of asteroid impact(s); - examine the origin and ultimate fate of the asteroid population (within our solar system); - to find suitable, low-Δv targets for future robotic and piloted missions of exploration Operating at SEL1, NEOSM will also find NEOs with long synodic periods (i.e., several decades or longer) and unfavorable orbital viewing geometries. NEOSM will obviate the inherent Earth-based geometric observing handicap.

NEO↗

NASA NTRSDate not supplied

Recent Updates to the Object Reentry Survival Analysis Tool (ORSAT) Version 7.1

The Object Reentry Survival Analysis Tool (ORSAT) code is maintained and used by the NASA Orbital Debris Program Office (ODPO) and has been under continuous development and improvement since the mid-1990s. ORSAT is an object-oriented reentry simulation tool; it models a satellite as a collection of discrete components that follow independent trajectories upon the breakup of the parent object. Version 7.1 of the tool incorporates five years of new thermal and aerodynamic model development, multi-processor parametric study capability, codebase upgrades, and numerous bug-fixes. The thermal demise model was completely rewritten using a forward-time/central-space numerical stencil and incorporating a new pyrolysis model for fiber-reinforced plastic (FRP) materials. New aerodynamic and aeroheating models for hollow cylinders and hollow square prisms were developed using a combination of flow simulations in the direct simulation Monte Carlo (DSMC) Analysis Code (DAC) and Data Parallel Line Relaxation (DPLR) code and free-flight tests in the University of Texas at San Antonio’s Hypersonic Wind Tunnel. The latest version also incorporates a mechanical, strength-based demise model for FRP materials. Minor improvements include an update to the Fortran 2018 codebase; improved integration and speed with the Python-based, multi-core, parametric study tool, AutoORSAT; and fixes for many minor bugs. This new version of ORSAT will enable more accurate reentry risk assessments for modern satellites. This paper presents an overview of these changes and a summary of the verification and validation performed on the final code.

Benton R. Greene↗

NASA NTRS2022

Interstellar Object Encounter Trade Space Exploration

2017 and 2019 saw the discovery of the first twointerstellar objects (ISO) in the solar system, 1I ‘Oumuamuaand 2I Borisov, but left scientists with more questions thananswers as to the objects’ origins. To fully resolve these openquestions, scientists need a closer look at an interstellar objectvia a dedicated spacecraft and close approach. However, ISOspose unique engineering challenges for close encounters becauseof their extremely high relative velocity, unfavorable approachgeometry, and limited alert time; ISOs often are only discovereda few months before a spacecraft would need to launch toencounter it.Typical encounters with small bodies have occurred at relativevelocities on the order of 10 km/s with approach phase below90 deg (at least half-lit). Except for the Halley Armada in the80s, the most extreme flybys have been of comet Borrelly ata relative velocity of 16.6 km/s (but only a phase angle of 65deg) and Annefrank at a phase angle of 150 deg (but a relativevelocity of only 7.2 km/s). Furthermore, planetary missionsgenerally target bodies whose ephemerides are well constrainedbecause of many years of Earth based observations. On theother hand, ISOs typically have relative velocities of 30-90 km/s,phase angles biased towards over 90 deg, and larger positionuncertainties because of shorter ground-based observationalarcs, and thus represent much more difficult targets.Our team has been developing the flight system architecturesand technologies necessary to enable future reconnaissance ofan interstellar object by flyby, potentially including an impactor.This endeavor seeks to catalyze planetary exploration and itsintersection with exo-planet science. We establish encounterguidance, navigation, and control requirements within the tradespace of trajectories to a synthetic ISO population. Flightsystem constraints, Earth departure capabilities, and ability fora mission team to quickly respond to an inbound target limitthe accessible space for a future mission. This trade spaceanalysis reveals enabling mission architectures, and providesrecommendations for supporting investment to enable an ISOmission in the next decade.

Farnocchia, Davide↗

NASA NTRSDate not supplied

Recent Updates to the Object Reentry Survival Analysis Tool (ORSAT) Version 7.1

Benton R. Greene↗

NASA NTRS2022

Shape Servoing of Deformable Objects using Adaptive Deformation Model Estimation

In this paper, we propose an adaptive shape servoing method to deform a soft object into a desired 3-D shape. The high dimensional representation and the unknown deformation properties of the soft object pose a challenge to actively manipulate its shape. To address this issue, we develop a method to compute the deformation Jacobian matrix in real-time. The Jacobian is estimated using a set of basis functions and its corresponding parameters to capture the dynamics of the system and relate the applied input motion to changes in the soft object's shape. An integral concurrent learning (ICL) based adaptive update law is derived using Lyapunov analysis to estimate the deformation parameters and prove its convergence. A physics-based simulation is used to validate the proposed method and controller by performing manipulation tasks with different desired configurations. The performance is compared with a standard gradient update law to demonstrate the accuracy and robustness of our approach.

Vrithik Raj Guthikonda↗

NASA NTRS2024

Preventing Camera Clipping Through Varied Terrain and Other Planetary Objects

Within the scope of computer visualization systems and technologies, camera objects allow users to navigate three-dimensional (3D) scenes much like a person would navigate the real world. As such, when one seeks to model a scene or environment based on real-world laws, the camera must often follow these same conventions. Accomplishing this in the world of computer renderings presents unique challenges for defining space, spatial relations, depth, distance, and height. Therefore, movement for a camera must be specifically designated and processed by the program in order to achieve accurate movement representations. Although this thought process involves each aspect of camera movement, one specific aspect of camera movement is the primary focus of this report: ensuring that the camera does not clip through an object and appear subsurface. This is important to mimic real-world movements because people in the real world would not go beneath the solid-surface terrain unless they intended to do so. By working with numerical definitions, equations, and variables, a computer can relate an object to its existence in space. Thus, such challenges in camera movements with computationally rendered 3D spaces can be mitigated.

Kristie O'Brien↗

NASA NTRSDate not supplied

Objective Structured Clinical Evaluation (OSCE) of an Artificial Intelligence (AI) Clinical Decision Support System (CDSS) Tool

BACKGROUND Objective Structured Clinical Evaluations (OSCEs) have long been established as a robust methodology for summative assessment of clinical skills and decision-making during medical education. The recent integration of Artificial Intelligence (AI) into clinical decision-making processes has prompted the need for novel evaluation frameworks to assess the efficacy and reliability of AI clinical decision support system (CDSS) tools. This abstract outlines the process of quantitatively evaluating a novel CDSS (“Doc in a Box” Google 2024) trained on curated medical spaceflight data in the psychomotor domain as it interfaces with a human volunteer acting as the crew medical officer (CMO). PURPOSE The AI CDSS under review was developed as part of the Lunar Command and Control Interoperability (LuCCI) project, which is intended to address a gap in how Lunar Surface Systems (LSS) would interoperate across multiple programs, commercial partners, and international partners. The project objective is to define, prototype, integrate, and evaluate an interoperable lunar command, control, data, and software reference architecture to enable autonomy and informatics capability through common standards across LSS. A multi-modal AI-based CDSS compatible with Federated LSS will assist clinicians in diagnosing and managing complex medical conditions by providing evidence-based recommendations through predictive analytics. Given the critical role of decision-support as NASA continues to evolve its Earth-independent medical operations (EIMO), it is imperative to ensure that such AI tools perform reliably and align with clinical standards during progressive lunar and Martian exploration class missions. METHODS The OSCE framework, traditionally used for evaluating human clinicians, was adapted to assess the AI tool's decision-making capabilities in simulated clinical scenarios. In this adapted OSCE, the AI CDSS was tested across a series of structured clinical scenarios designed to mimic real-life spaceflight patient cases. These scenarios included a range of conditions and complexities, allowing for comprehensive assessment of the tool's performance. Key evaluation metrics included accuracy of diagnosis, timeliness of decision-making, and appropriate recommendations for therapies. The OSCE was scored by human physician evaluators who assessed the AI's recommendations in comparison with expert clinicians' medical decision making to ensure alignment with best practices and the standard of care. RESULTS Preliminary results indicate that the AI CDSS demonstrated high accuracy in diagnostic recommendations and decision support across various scenarios. However, certain limitations were noted, such as occasional discrepancies in handling complex or nuanced cases that required a more contextual understanding. Additionally, the tool scored higher on the diagnostic portion of the rubric, with lower scores in the therapeutic recommendations. These findings highlight the importance of continuous refinement and validation of AI tools through rigorous evaluation frameworks like the OSCE. The adaptation of OSCEs for AI tools presents several advantages, including a structured and reproducible approach to evaluation, the ability to test AI systems in diverse clinical scenarios, and the opportunity to benchmark AI performance against established clinical standards to permit charting of future progress as aerospace medicine evolves as a discipline. Remaining challenges include ensuring that these evaluations capture the full spectrum of clinical decision-making scenarios that will be confronted by CMOs during missions and adequately reflecting real-world variability of the austere spaceflight environment. CONCLUSION Employing OSCEs to evaluate AI clinical decision support tools offers a promising approach to validating their clinical utility and efficacy. This methodology not only provides insights into the tool's performance but also fosters ongoing improvement and alignment with standard of care practices. Future research should focus on refining these evaluation processes and addressing limitations to enhance the integration of AI tools in clinical spaceflight settings. REFERENCES Scott S, Hearns V, Barker MA. Testing Clinical Skills: A Look at the OSCE and USMLE Clinical Skills Exams. S D Med. 2019 Oct;72(10):451-453. Majumder MAA, Kumar A, Krishnamurthy K, Ojeh N, Adams OP, Sa B. An evaluative study of objective structured clinical examination (OSCE): students and examiners perspectives. Adv Med Educ Pract. 2019 Jun 5;10:387-397. Karam VY, Park YS, Tekian A, Youssef N. Evaluating the validity evidence of an OSCE: results from a new medical school. BMC Med Educ. 2018 Dec 20;18(1):313.

Ariana M Nelson↗

DOE OSTI2020

Sensors and methods for monitoring flying objects

Described herein are sensing methods, sensor systems, and non-transitory, computer-readable, storage media having programs for long-duration, continuous monitoring of flying objects during the day or the night and regardless of weather conditions. The methods and systems are computationally efficient and can provide compact, three-dimensional representations of motion from the observed object. A 3D track of the flying object can be generated from a point-matched pair of stereo composite motion track images and not directly from the videos, wherein each composite motion track image is based on a composite of a plurality of video frames composited in part according to video frame numbers.

Matzner, Shari↗

DOE OSTI2022

Additive manufacturing of complex objects using refractory matrix materials

A method for the manufacture of a three-dimensional object using a refractory matrix material is provided. The method includes the additive manufacture of a green body from a powder-based refractory matrix material followed by densification via chemical vapor infiltration (CVI). The refractory matrix material can be a refractory ceramic (e.g., silicon carbide, zirconium carbide, or graphite) or a refractory metal (e.g., molybdenum or tungsten). In one embodiment, the matrix material is deposited according to a binder-jet printing process to produce a green body having a complex geometry. The CVI process increases its density, provides a hermetic seal, and yields an object with mechanical integrity. The residual binder content dissociates and is removed from the green body prior to the start of the CVI process as temperatures increase in the CVI reactor. The CVI process selective deposits a fully dense coating on all internal and external surfaces of the finished object.

Terrani, Kurt A.↗

DOE OSTI2024

Hiding-in-Plain-Sight (HiPS) Attack on CLIP for Targetted Object Removal from Images

Machine learning models are known to be vulnerable to adversarial attacks, but prior works have mostly focused on single-modalities. With the rise of large multi-modal models (LMMs) like CLIP, which combine vision and language capabilities, new vulnerabilities have emerged. However, these multimodal targeted attacks aim to completely change the model's output to what the adversary wants. In many realistic scenarios, an adversary might seek to make only subtle modifications to the output, so that the changes go unnoticed by downstream models or even by humans. We introduce Hiding-in-Plain-Sight (HiPS) attacks, a novel class of adversarial attacks that subtly modifies model predictions by selectively concealing target object(s), as if the target object was absent from the scene. We propose two HiPS attack variants, HiPS-cls and HiPS-cap, and demonstrate their effectiveness in transferring to downstream image captioning models, such as CLIP-Cap, for targeted object removal from image captions.

Daw, Arka [ORNL] (ORCID:0009000633191271)↗

DOE OSTI2024

Additive manufacturing of complex objects using refractory matrix materials

Terrani, Kurt A.↗

DOE OSTI2025

Dynamical Heating from Dark Compact Objects and Axion Minihalos: Implications for the 21-cm Signal

The temperature of baryons at the end of the cosmic dark ages can be inferred from observations of the 21-cm hyperfine transition in neutral hydrogen. Any energy injection from the dark sector can therefore be detected through these measurements. Dark compact objects and dark-matter substructures can modify the baryon temperature by transferring heat via dynamical friction. In this work, we evaluate the prospects for detecting dynamical friction-induced heating from dark compact objects with a mass in the range $10^2 M_{\odot}$ to $10^5 M_{\odot}$, as well as from axion minihalos, using upcoming 21-cm experiments. We find that both the 21-cm global signal and power-spectrum measurements will be sensitive to dark compact objects that constitute about 10% of the dark matter, and will substantially improve our sensitivity to axion-like particles with masses in the range $10^{-18}$ eV to $10^{-9}$ eV.

Bhalla, Badal [Oklahoma U.] (ORCID:000000030488664↗