Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Large area focusing collector for the observation of cosmic X rays.

A large area focusing X-ray collector constructed for a sounding rocket is described. The instrument consists of nested reflecting plates that are curved slightly in one dimension to form a set of parabolas with a common focus. An array of plates such as the one in the sounding rocket focuses a parallel beam of X-rays to a line. The reflecting surfaces are commercial float glass with an evaporated metallic coating such as gold or nickel. With a gold coating, the effective area of the rocket collector is about 250 sq cm for 0.3 keV X rays and about 150 sq cm at 1.2 keV. Its angular resolution is a few arc minutes and field of view is about plus or minus .75 deg (full width at half maximum). The collector performed successfully during a sounding rocket flight.

Gorenstein, P.↗
NASA NTRS1974

REDUCE 2: A computer program for the symbolic reduction of large block diagrams

REDUCE 2 is reported as a FORMAC program which symbolically calculates the transfer function(s) of any linear-block-diagram output variable to any or all input variables. The program requires as input a set of algebraic expressions representing the block diagram, the desired transfer function(s), and a string of variables indicating the desired order of reduction. The solution is presented in the compact form of a set of nested functions (super G's). The program can handle systems as large as 600 equations and is intended as a tool for the analysis of complex control and dynamic systems. A companion FORTRAN program, EVAL 2, which numerically evaluates the solution set to obtain amplitude ratio and phase angle as functions of frequency is also presented.

Lorenzo, C. F.↗
NASA NTRS1975

Effectiveness of spoilers on the GA(W)-1 airfoil with a high performance Fowler flap

Two-dimensional wind-tunnel tests were conducted to determine effectiveness of spoilers applied to the GA(W)-1 airfoil. Tests of several spoiler configurations show adequate control effectiveness with flap nested. It is found that providing a vent path allowing lower surface air to escape to the upper surface as the spoiler opens alleviates control reversal and hysteresis tendencies. Spoiler cross-sectional shape variations generally have a modest influence on control characteristics. A series of comparative tests of vortex generators applied to the (GA-W)-1 airfoil show that triangular planform vortex generators are superior to square planform vortex generators of the same span.

Wentz, W. H., Jr.↗
NASA NTRS1977

Toroidal converter core

Improved approach consists of cut and uncut cores nested in concentric configuration. Cores are made by winding steel ribbon on mandrel and impregnating with epoxy to bond layers together. Gap is made by cutting across wound and bonded core. Rough ends are ground or lapped.

Mclyman, W. T.↗
NASA NTRS1975

Design and fabrication of an end effector

The construction is described of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. A model was tested and found capable of both these operations.

Crossley, F. R. E.↗
NASA NTRS1975

Solar activity observed in X-rays and the EUV from OSO 7

Spectroheliograms obtained with the EUV spectroheliograph aboard OSO 7 between 1.7 and 400 A with a spatial resolution of at least 20 x 20 arc seconds are described, and results of an initial analysis of the Goddard X-ray polarimeter measurements are given and discussed in the light of current flare theories. The EUV observations are consistent with a picture in which coronal enhancement overlying an active region is made up of a nested set of arches or loops, with foot-points in regions of opposite magnetic polarity. The outermost arches are coolest, while those nearer the center are hotter. Along a given field line there is a temperature gradient such that the highest temperature occurs at the highest point of the magnetic arch. Polarimeter data provide evidence for polarization of about 20% in a number of X-ray bursts.

Thomas, R. J.↗
NASA NTRS1975

Program design by a multidisciplinary team

The use of software engineering aids in the design of a structural finite-element analysis computer program for the STAR-100 computer is described. Nested functional diagrams to aid in communication among design team members were used, and a standardized specification format to describe modules designed by various members was adopted. This is a report of current work in which use of the functional diagrams provided continuity and helped resolve some of the problems arising in this long-running part-time project.

Voigt, S.↗
NASA NTRS1976

Implementation on a nonlinear concrete cracking algorithm in NASTRAN

A computer code for the analysis of reinforced concrete structures was developed using NASTRAN as a basis. Nonlinear iteration procedures were developed for obtaining solutions with a wide variety of loading sequences. A direct access file system was used to save results at each load step to restart within the solution module for further analysis. A multi-nested looping capability was implemented to control the iterations and change the loads. The basis for the analysis is a set of mutli-layer plate elements which allow local definition of materials and cracking properties.

Herting, D. N.↗
NASA NTRS1977

An automated consultant for MACSYMA

A consultant is necessary whenever on is faced with a problem solving situation in a domain one does not fully understand. The lack of knowledge may be incidental, as it is when the domain or device is fairly simple but time constraints make it impossible for the user to learn all that is necessary. Computer systems like MACSYMA in which the level of commands is so close to the level of the task environment that the user is apt to confuse a simply defined procedure (like COEFF) with its mathematical counterpart (here coefficient) that it at best approximates. A computer program is described which has the capability of conversing with its user in English about a difficulty he has encountered, and providing information tailored to his need. The MACSYMA Advisor is a program distinct from MACSYMA with its own separate data base and expertise. For convenience the program can be called directly from MACSYMA and can access the user's data structures contained therein. The Advisor described here deals only with the "straightline" or nested use of MACSYMA commands and not loops or user-defined functions. The implementation of the Advisor relies heavily on an explict, internal "model" of the user's state of knowledge, his goals, and his "plan" for achieving them.

Genesereth, M. R.↗
NASA NTRS1977

Design for a three-fingered hand

This paper describes the construction of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. One of our models was tested and found capable of both these operations.

Crossley, F. R. E.↗
NASA NTRS1978

Design and fabrication of a radiative actively cooled honeycomb sandwich structural panel for a hypersonic aircraft

The panel assembly consisted of an external thermal protection system (metallic heat shields and insulation blankets) and an aluminum honeycomb structure. The structure was cooled to temperature 442K (300 F) by circulating a 60/40 mass solution of ethylene glycol and water through dee shaped coolant tubes nested in the honeycomb and adhesively bonded to the outer skin. Rene'41 heat shields were designed to sustain 5000 cycles of a uniform pressure of + or - 6.89kPa (+ or - 1.0 psi) and aerodynamic heating conditions equivalent to 136 kW sq m (12 Btu sq ft sec) to a 422K (300 F) surface temperature. High temperature flexible insulation blankets were encased in stainless steel foil to protect them from moisture and other potential contaminates. The aluminum actively cooled honeycomb sandwich structural panel was designed to sustain 5000 cycles of cyclic in-plane loading of + or - 210 kN/m (+ or - 1200 lbf/in.) combined with a uniform panel pressure of + or - 6.89 kPa (?1.0 psi).

Ellis, D. A.↗
NASA NTRS1978

Hexagon solar power panel

A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

Rubin, I.↗
NASA NTRS1978

Formation of lunar basin rings

The outer rings of impact basins are interpreted as the bounding rings of the excavated basin cavities analogous to Copernicus-type crater rim crests. It is suggested that the inner rings are strata from depth uplifted during excavation of the transient cavity. Spacing relations and morphology appear to indicate a transition from central peaks to rings but not from terraces to rings. Evidence related to terrestrial craters with rings or peaks produced by meteorite impacts suggests that one or more crater rims may form inside the main, outer crater rim, resulting in nested craters. There is some evidence that peaks grade into inner rings as material is ejected from their cores in progressively larger impacts. Multiply layered materials may produce multiple rings by differential excavation of the layers.

Hodges, C. A.↗
NASA NTRS1977

A multiscale numerical study into the cascade of kinetic energy leading to severe local storms

The cascade of kinetic energy from macro- through mesoscales is studied on the basis of a nested grid system used to solve a set of nonlinear differential equations. The kinetic energy cascade and the concentration of vorticity through the hydrodynamic spectrum provide a means for predicting the location and intensity of severe weather from large-scale data sets. A mechanism described by the surface pressure tendency equation proves to be important in explaining how initial middle-tropospheric mass-momentum imbalances alter the low-level pressure field.

Paine, D. A.↗
NASA NTRS1978

Space Spider - A concept for fabrication of large structures

The Space Spider concept for the automated fabrication of large space structures involves a specialized machine which roll-forms thin gauge material such as aluminum and develops continuous spiral structures with radial struts to sizes of 600-1,000 feet in diameter by 15 feet deep. This concept allows the machine and raw material to be integrated using the Orbiter capabilities, then boosting the rigid system to geosynchronous equatorial orbit (GEO) without high sensitivity to acceleration forces. As a teleoperator controlled device having repetitive operations, the fabrication process can be monitored and verified from a ground-based station without astronaut involvement in GEO. The resultant structure will be useful as an intermediate size platform or as a structural element to be used with other elements such as the space-fabricated beams or composite nested tubes.

Britton, W. R.↗
NASA NTRS1978

Heat exchanger

A heat exchanger, as exemplified by a rocket combustion chamber, is constructed by stacking thin metal rings having microsized openings therein at selective locations to form cooling passages defined by an inner wall, an outer wall and fins. Suitable manifolds are provided at each end of the rocket chamber. In addition to the cooling channel openings, coolant feed openings may be formed in each of rings. The coolant feed openings may be nested or positioned within generally U-shaped cooling channel openings. Compression on the stacked rings may be maintained by welds or the like or by bolts extending through the stacked rings.

Sokolowski, D. E.↗
NASA NTRS1978

Analysis of dissection algorithms for vector computers

Recently two dissection algorithms (one-way and incomplete nested dissection) have been developed for solving the sparse positive definite linear systems arising from n by n grid problems. Concurrently, vector computers (such as the CDC STAR-100 and TI ASC) have been developed for large scientific applications. An analysis of the use of dissection algorithms on vector computers dictates that vectors of maximum length be utilized thereby implying little or no dissection; on the other hand, minimizing operation counts suggest that considerable dissection be performed. In this paper we discuss the resolution of this conflict by minimizing the total time required by vectorized versions of the two algorithms.

George, A.↗
NASA NTRS1980

Vise holds specimens for microscope

Convenient, miniature, spring-loaded clamp holds specimens for scanning electron microscope. Clamp is made out of nesting sections of studded angle-aluminum. Specimens are easier to mount and dismount with vise than with conductive adhesive or paint.

Greule, W. N.↗