Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Single pulse vibrational Raman scattering by a broadband KrF excimer laser in a hydrogen-air flame

Spontaneous vibrational Raman scattering (VRS) is produced by a broadband excimer laser at 248 nm (KrF) in a H2-air flame, and VRS spectra are recorded for lean, stoichiometric, and rich flames. Except at very lean flame conditions, laser-induced fluorescence (LIF) processes interfere with VRS Stokes lines from H2, H2O, and O2. No interference is found for the N2 Stokes and N2 anti-Stokes lines. In a stoichiometric H2/air flame, single-pulse measurements of N2 concentration and temperature (by the VRS Stokes to anti-Stokes ratio) have a relative standard deviation of 7.7 and 10 percent, respectively. These single pulse measurement errors compare well with photon statistics calculations using measured Raman cross sections.

Pitz, Robert W.↗

Preliminary plume characteristics of an arcjet thruster

An experimental program initiated to characterize the near field of an arcjet plume is described. The complete emission spectrum from 3200 to 7200 A at the nozzle exit plane detected the electronically excited species N2, N2(+), NH, and H, indicating excitation, dissociation, ionization, and recombination in the nozzle. Axial intensity profiles indicated an exponential decay in excited state population for H(alpha), H(beta), and NH. The rate of axial decay indicated lower velocities for NH than H in the plume and population of the third excited energy state of hydrogen from the decay of higher energy levels. Rotational temperatures ranged from 750 K for N2 to 2500 K for NH. Based on these results, the arcjet plume is found to be a highly nonequilibrium plasma. Anode electrical configuration is found to have a large effect on the spectral intensities measured in the plume.

Manzella, David H.↗

Plasma puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for the azimuthally uniform surface flashover which initiates plasma-puff under wide range of fill gas pressure of Ar, He and N2. The optimal fill gas pressure for the azimuthally uniform plasma-puff was about 120 mTorr and 450 Torr for He and N2, and between 120 mTorr and 5 Torr for Ar. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with the hypocycloidal pinch plasma-puff triggering. The main discharge of inverse pinch switch with plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr.

Venable, D. D.↗

LIF and emission studies of copper and nitrogen

A technique is developed to determine the rotational temperature of nitrogen molecular ion, N2(+), from the emission spectra of B-X transition, when P and R branches are not resolved. Its validity is tested on simulated spectra of the 0-1 band of N2(+) produced under low resolution. The method is applied to experimental spectra of N2(+) taken in the shock layer of a blunt body at distances of 1.91, 2.54, and 3.18 cm from the body. The laser induced fluorescence (LIF) spectra of copper atoms is analyzed to obtain the free stream velocities and temperatures. The only broadening mechanism considered is Doppler broadening. The temperatures are obtained by manual curve fitting, and the results are compared with least square fits. The agreement on the average is within 10 percent.

Akundi, Murty A.↗

Vibrational relaxation in very high temperature nitrogen

Vibrational relaxation of N2 molecules is considered at temperatures up to 40,000 K in gas mixtures that contain electrons as well as heavy collision partners. The theory of vibrational relaxation due to N2-N2 collisions is fit to experimental data to 10,000 K by choice of the shape of the intermolecular potential and size of the collision cross section. These values are then used to extrapolate the theory to 40,000 K.

Hansen, C. Frederick↗

Collisional excitation and radiative properties of N II - The strong intercombination (1D - 3P0) transition at 748 A

Laboratory measurements of EUV emission from electron-excited N2 have been obtained at medium resolution, providing N II EUV emission cross section measurements and allowing the confirmation of recent calculations by Fawcett (1987) indicating the presence of a strong intercombination line in N II at 748.37 A. The most recently available data are used to predict the basic collisional and radiative properties of N II, the plasma diagnostic properties are briefly explored, and radiative cooling coefficients are given. Some basic properties of electron-excited N II and N2 are examined in the EUV in order to diagnose emission spectra of the earth and Titan. The N II emissions in the earth dayglow, particularly at 916 A, are much brighter than current estimates of source rates. The N II 1085 A line in the dayglow contains a significant component from dissociative photoionization excitation. The N II 1085 A, 916 A, and 670 A lines in the Titan dayglow spectrum appear to be compatible with direct electron excitation of N2.

Tripp, T. M.↗

Vibrational relaxation and dissociation in nitrogen

Calculations of the vibrational and dissociation transition probabilities are made for N2-N2 and N2-N collisions by means of a semiclassical N-state approximation. The flaws in previous techniques are reviewed, with special attention given to the prediction of overtones. The method presented ignores the effects of molecular rotation and employs a revised extended Rydberg intermolecular potential to describe diatom-diatom and diatom-atom collisions. The collision velocities investigated exhibit probabilities of less than unity by means of the N-state method. The continuum is quantized to treat dissociation, and the collision results demonstrate probability enhancements for V-V-T transitions in both bound-bound and bound-free transitions. The technique is of particular interest for the theoretical modeling of reentry flows such as those encountered in aerobraking maneuvers.

Varghese, Philip L.↗

Electron energy spectrum and magnetic interactions in high-Tc superconductors

The character of magnetic interactions in La-Sr-Cu-O and Y-Ba-Cu-O systems is of primary importance for analysis of high-T(sub c) superconductivity in these compounds. Neutron diffraction experiments showed the antiferromagnetic ground state for nonsuperconducting La2CuO4 and YBa2Cu3O6 with the strongest antiferromagnetic superexchange being in the ab plane. The nonsuperconducting '1-2-3' system has two Neel temperatures T(sub N1) and T(sub N2). The first one corresponds to the ordering of Cu atoms in the CuO2 planes; T(sub N2) reflects the antiferromagnetic ordering of magnetic moments in CuO chains relatively to the moments in the planes T(sub N1) and T(sub N2) which depend strongly on the oxygen content. Researchers describe magnetic interactions in high-T superconductors based on the Linear Muffin-Tin Orbitals (LMTO) band structure calculations. Exchange interaction parameters can be defined from the effective Heisenberg Hamiltonian. When the magnetic moments are not too large, as copper magnetic moments in superconducting oxides, J(sub ij) parameters can be defined through the non-local magnetic susceptibility of spin restricted solution for the crystal. The results of nonlocal magnetic susceptibility calculations and the values of exchange interaction parameters for La CuO and YBa2Cu3O7 systems are given in tabular form. Strong anisotropy of exchange interactions in the ab plane and along the c axis in La2CuO4 is obviously seen. The value of Neel temperature found agrees well with the experimental data available. In the planes of '1-2-3' system there are quite strong antiferromagnetic Cu-O and O-O interaction which appear due to holes in oxygen subbands. These results are in line with the magnetic model of oxygen holes pairing in high-T(sub c) superconductors.

Turshevski, S. A.↗

Rate calculations for the simultaneous vibrational relaxation and dissociation of nitrogen

Experimental data on vibrational relaxation and dissociation rates in highly nonequilibrium gases are scarce. Recently there have been several attempts at generating these rates by direct calculation of inelastic collision cross-sections. Some issues that need to be considered if such calculations are to be used as a basis for analysis and design are examined. In particular, the following are examined: (1) collinear vs 3D scattering models, (2) accurate intermolecular potentials, (3) closed channels and acceleration schemes, (4) thermal averaging and thermal rates, and (5) code validation. It has been necessary to confront these issues during the course of N2-N2 and N2-N inelastic cross-section calculations.

Gonzales, David A.↗

Raman scattering measurements in flames using a tunable KrF excimer laser

A narrow-band tunable KrF excimer laser is used as a spontaneous vibrational Raman scattering source to demonstrate that single-pulse concentration and temperature measurements, with only minimal fluorescence interference, are possible for all major species (O2, N2, H2O, and H2) at all stoichiometries (fuel-lean to fuel rich) of H2-air flames. Photon-statistics-limited precisions in these instantaneous and spatially resolved single-pulse measurements are typically 5 percent, which are based on the relative standard deviations of single-pulse probability distributions. In addition to the single-pulse N2 Stokes/anti-Stokes ratio temperature measurement technique, a time-averaged temperature measurement technique is presented that matches the N2 Stokes Raman spectrum to theoretical spectra by using a single intermediate state frequency to account for near-resonance enhancement. Raman flame spectra in CH4-air flames are presented that have good signal-to-noise characteristics and show promise for single-pulse UV Raman measurements in hydrocarbon flames.

Wehrmeyer, Joseph A.↗

The effect of molecular relaxation processes in air on the rise time of sonic booms

A theory is developed to explain the effect of molecular relaxation processes on the rise time of sonic booms. To determine the rise time of sonic booms, both O2 and N2 relaxation processes must be included. The N2 relaxation process delays the shock pressure reaching the maximum pressure, and the O2 relaxation process causes a shock profile to have a gentle slope. The N2 relaxation controls the lower part of overpressure; the O2 relaxation controls the higher part. The constant rise time curves show that the rise times increase as the overpressures and humidity decrease. The present approach gives longer rise times than those acquired by Bass et al. for given shock overpressures.

Kang, Jongmin↗

Measured rotational and vibrational temperature differences in arc jet shock layers

Shock-layer-radiation emission spectra from the first negative system of the nitrogen molecular ion N2(+) are analyzed over the wavelength region between 370 and 430 nm. The shock layer is produced by a blunt body placed in the expanded flow from an arc heater employing either pure nitrogen or a nitrogen-oxygen air mixture. A rotational temperature is obtained from analysis of (0,1) band emission from N2(+). Vibrational temperatures are extracted from population distributions obtained through spectral fitting of the N2(+) (B-X) band sequences. Rotational temperatures up to 9500 K near the front of the shocks are determined for different energy and flow conditions. The rotational temperatures are found to be lower than those obtained for vibration confirming previous measurements and contrary to expectation based on theory.

Blackwell, Harvel E.↗

Theoretical studies of important processes in planetary and comet atmospheres

This is the fifth semi-annual progress report describing research on dissociative recombination reactions in planetary and comet atmospheres. The Appendix has two papers that describe NASA supported research. Both papers have been recently accepted for publication. The first paper, 'The Generation of O(S-1) from the Dissociative Recombination of O2(+)', describes in detail the Multichannel Quantum Defect (MQDT) theory used for the calculation of dissociative recombination (DR) cross sections and rates. The application to the generation of the upper state of the atomic oxygen green line emission is of great importance to the modelling of planetary atmospheres. The second paper in the Appendix, 'Dissociative Recombination of the Ground State of N2(+)', applies the methods described in the first paper to N2(+). We find remarkable agreement with the prior microwave afterglow experiments for both the total recombination rate and for its electron temperature dependence. However, the results disagree with recent merged beams results which gave cross sections that are a factor of five below the microwave afterglow experiments and the current results. DR of N2(+) is an important mechanism for generating energetic N atoms which can escape the atmosphere of Mars. Currently we are also continuing additional work on the DR of O2(+) which is aimed at calculating both the total DR rate as a function of ion vibrational level and the rate for production of O(D-1).

Guberman, Steven L.↗

Imaging of four planetary nebulae in the Magellanic Clouds using the Hubble Space Telescope Faint Object Camera

Using the Faint Object Camera on-board the Hubble Space Telescope, we have obtained images of four planetary nebulae (PNe) in the Magellanic Clouds, namely N2 and N5 in the SMC and N66 and N201 in the LMC. Each nebula was imaged through two narrow-band filters isolating forbidden O III 5007 and H-beta, for a nominal exposure time of 1000 s in each filter. In forbidden O III, SMC N5 shows a circular ring structure, with a peak-to-peak diameter of 0.26 arcsec and a FWHM of 0.35 arcsec while SMC N2 shows an elliptical ring structure with a peak-to-peak diameter of 0.26 x 0.21. The expansion ages corresponding to the observed structures in SMC N2 and N5 are of the order of 3000 yr. LMC N201 is very compact, with a FWHM of 0.2 arcsec in H-beta. The Type I PN LMC N66 is a multipolar nebula, with the brightest part having an extent of about 2 arcsec and with fainter structures extending over 4 arcsec.

Blades, J. C.↗

The influence of thermal inertia on temperatures and frost stability on Triton

It is presently argued, in view of (1) a thermal inertia model for the surface of Triton which (like previous ones) predicts a monotonic recession of permanent N2 deposits toward the poles and very little seasonal N2 frost in the southern hemisphere, and (2) new spectroscopic evidence for nonvolatile CO2 on Triton's bright southern hemisphere, that much of that bright southern material is not N2. Such bright southern hemisphere volatiles may allow the formation of seasonal frosts, thereby helping to explain the observed spectroscopic changes of Triton during the last decade.

Spencer, John R.↗

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(opt) less than 450 Torr for He and N2. For Argon 120 mTorr less than P(opt) less than 5 Torr for argon. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z equals 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z equals 100 ohms.

Venable, D. D.↗

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(sub opt) less than 450 Torr for He and N2. For Argon 20 mTorr is less than P(sub opt) is less than 5 Torr. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z = 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z = 100 ohms.

Han, Kwang S.↗

Characteristics of plasma-puff trigger for a inverse-pinch plasma switch

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for the azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressure of Ar, He and N2. The optimal fill-gas pressure range for the azimuthally uniform plasma-puff was about 120 mTorr less than or equal to P(sub op) less than or equal to 450 Torr for He and N2. For Argon 120 mTorr is less than or equal to P(sub op) is less than or equal to 5 Torr. The inverse-pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. The azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff will be discussed in comparison with the current hypocycloidal-pinch plasma-puff triggering.

Choi, Eun H.↗