SEARCH · Engineering Papers

Results for “Model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1980

On the performance of explicit and implicit algorithms for transient thermal analysis

The status of an effort to increase the efficiency of calculating transient temperature fields in complex aerospace vehicle structures is described. The advantages and disadvantages of explicit and implicit algorithms are discussed. A promising set of implicit algorithms, known as the GEAR package is described. Four test problems, used for evaluating and comparing various algorithms, have been selected and finite element models of the configurations are discribed. These problems include a space shuttle frame component, an insulated cylinder, a metallic panel for a thermal protection system and a model of the space shuttle orbiter wing. Calculations were carried out using the SPAR finite element program, the MITAS lumped parameter program and a special purpose finite element program incorporating the GEAR algorithms. Results generally indicate a preference for implicit over explicit algorithms for solution of transient structural heat transfer problems when the governing equations are stiff. Careful attention to modeling detail such as avoiding thin or short high-conducting elements can sometimes reduce the stiffness to the extent that explicit methods become advantageous.

Adelman, H. M.↗

NASA NTRS1980

Developing the concept of a geostationary platform

A geostationary platform concept with a proliferation of low-cost earth stations is discussed. Candidate platform concepts, servicing, life, and Orbital Transfer Vehicle (OTV) options are considered. A Life Cycle Costing model is used to select the minimum cost concept meeting program criteria. It is concluded that the geostationary platform concept is a practical and economical approach to providing expanding communication services within the limitations imposed by the available frequency spectrum and orbital arc.

Carey, W. T.↗

NASA NTRS1981

Decision Aids for Airborne Intercept Operations in Advanced Aircrafts

A tactical decision aid (TDA) for the F-14 aircrew, i.e., the naval flight officer and pilot, in conducting a multitarget attack during the performance of a Combat Air Patrol (CAP) role is presented. The TDA employs hierarchical multiattribute utility models for characterizing mission objectives in operationally measurable terms, rule based AI-models for tactical posture selection, and fast time simulation for maneuver consequence prediction. The TDA makes aspect maneuver recommendations, selects and displays the optimum mission posture, evaluates attackable and potentially attackable subsets, and recommends the 'best' attackable subset along with the required course perturbation.

Madni, A.↗

NASA NTRS1981

Effect of polynucleotides on the dimerization of glycine

Results from experiments to determine the effect of polynucleotides on abiological formation of peptide bonds are reported. The reaction between glycine molecules in an aqueous phase in the presence of a condensing agent was chosen as a model, with polyphosphates being selected as the condensing agent for biologically relevant peptide formation. Four types of polynucleotides were used: polygluanic acid (G), polyuridic acid (U), polyadenylic acid (A), and polycytidylic acid (C); the effects of small anions, acetate, chloride, and phosphate, were also studied. Procedures are given, including concentrations, pH, and incubation time, and the type of amino acid analyzer. The diglycine yields were, in order of most to least: G, C, A, U, and are diagrammed as a function of time; rate of formation followed the same order of magnitude as the final yields. Anion presence displayed no discernible effect. The results are taken to indicate that polynucleotides do have an effect on the formation of peptide bonds, an effect significant in the understanding of chemical evolution.

Mizutani, H.↗

NASA NTRS1981

NASA LeRC/Akron University Graduate Cooperative Fellowship Program and Graduate Student Researchers Program

The requisite methodology to solve linear and nonlinear problems associated with the static and dynamic analysis of rotating machinery, their static and dynamic behavior, and the interaction between the rotating and nonrotating parts of an engine is developed. Linear and nonlinear structural engine problems are investigated by developing solution strategies and interactive computational methods whereby the man and computer can communicate directly in making analysis decisions. Representative examples include modifying structural models, changing material, parameters, selecting analysis options and coupling with interactive graphical display for pre- and postprocessing capability.

Fertis, D. G.↗

NASA NTRS1984

Regularized Monte-Carlo calculations of the optical polarization induced by scattering in X-ray binaries

The results of regularized Monte Carlo calculations of the optical polarization Stokes parameters expected as a result of scattering from gas streams or accretion wakes in close binary systems whose properties resemble those of X-ray binaries are presented. The physical processes occurring in the system are represented by a model which follows a selected sample of individual photon paths from each emitting element on the surface of the primary to the photon's detection at earth. The result represents the variations in the intensity from each individual emitting element caused by the effects of limb darkening, gravity darkening, and variation in the projected area of the emitting element as seen from the scattering element.

Dolan, J. F.↗

NASA NTRS1985

Free-tip-rotor wind-tunnel test results

Seven controller mechanisms and several tip geometries were proposed and evaluated in the course of a free tip rotor development program which integrated those components into a model rotor system for wind tunnel testing. After a rigid whirl test was run to determine controller mechanism performance and structural integrity, a second whirl test was performed with a model rotor incorporating a selected controller design and a selected tip platform to determine the transient behavior of the tips in response to aerodynamic excitation. The results obtained demonstrate that a swept, tapered tip with a tension-torsion strap controller furnished satisfactory mechanical operation, achieved the specified output torque, possessed a low spring rate, and had fast and stable response to excitation.

Stroub, R. H.↗

NASA NTRS1989

Simulation Of Combat With An Expert System

Proposed expert system predicts outcomes of combat situations. Called "COBRA", combat outcome based on rules for attrition, system selects rules for mathematical modeling of losses and discrete events in combat according to previous experiences. Used with another software module known as the "Game". Game/COBRA software system, consisting of Game and COBRA modules, provides for both quantitative aspects and qualitative aspects in simulations of battles. COBRA intended for simulation of large-scale military exercises, concepts embodied in it have much broader applicability. In industrial research, knowledge-based system enables qualitative as well as quantitative simulations.

Provenzano, J. P.↗

NASA NTRS1989

An integrated approach to the optimum design of actively controlled composite wings

The importance of interactions among the various disciplines in airplane wing design has been recognized for quite some time. With the introduction of high gain, high authority control systems and the design of thin, flexible, lightweight composite wings, the integrated treatment of control systems, flight mechanics and dynamic aeroelasticity became a necessity. A research program is underway now aimed at extending structural synthesis concepts and methods to the integrated synthesis of lifting surfaces, spanning the disciplines of structures, aerodynamics and control for both analysis and design. Mathematical modeling techniques are carefully selected to be accurate enough for preliminary design purposes of the complicated, built-up lifting surfaces of real aircraft with their multiple design criteria and tight constraints. The presentation opens with some observations on the multidisciplinary nature of wing design. A brief review of some available state of the art practical wing optimization programs and a brief review of current research effort in the field serve to illuminate the motivation and support the direction taken in our research. The goals of this research effort are presented, followed by a description of the analysis and behavior sensitivity techniques used. The presentation concludes with a status report and some forecast of upcoming progress.

Livne, E.↗

NASA NTRS1988

Advanced physical-chemical life support systems research

A proposed NASA space research and technology development program will provide adequate data for designing closed loop life support systems for long-duration manned space missions. This program, referred to as the Pathfinder Physical-Chemical Closed Loop Life Support Program, is to identify and develop critical chemical engineering technologies for the closure of air and water loops within the spacecraft, surface habitats or mobility devices. Computerized simulation can be used both as a research and management tool. Validated models will guide the selection of the best known applicable processes and in the development of new processes. For the integration of the habitat system, a biological subsystem would be introduced to provide food production and to enhance the physical-chemical life support functions on an ever-increasing basis.

Evanich, Peggy L.↗

NASA NTRS1991

Development and verification of global/local analysis techniques for laminated composites

A two-dimensional to three-dimensional global/local finite element approach was developed, verified, and applied to a laminated composite plate of finite width and length containing a central circular hole. The resulting stress fields for axial compression loads were examined for several symmetric stacking sequences and hole sizes. Verification was based on comparison of the displacements and the stress fields with those accepted trends from previous free edge investigations and a complete three-dimensional finite element solution of the plate. The laminates in the compression study included symmetric cross-ply, angle-ply and quasi-isotropic stacking sequences. The entire plate was selected as the global model and analyzed with two-dimensional finite elements. Displacements along a region identified as the global/local interface were applied in a kinematically consistent fashion to independent three-dimensional local models. Local areas of interest in the plate included a portion of the straight free edge near the hole, and the immediate area around the hole. Interlaminar stress results obtained from the global/local analyses compares well with previously reported trends, and some new conclusions about interlaminar stress fields in plates with different laminate orientations and hole sizes are presented for compressive loading. The effectiveness of the global/local procedure in reducing the computational effort required to solve these problems is clearly demonstrated through examination of the computer time required to formulate and solve the linear, static system of equations which result for the global and local analyses to those required for a complete three-dimensional formulation for a cross-ply laminate. Specific processors used during the analyses are described in general terms. The application of this global/local technique is not limited software system, and was developed and described in as general a manner as possible.

Thompson, Danniella Muheim↗

NASA NTRS1990

Estimation of the turbulent boundary layer pressure wavenumber-frequency spectrum using a fixed probe pair

The turbulent boundary layer (TBL) pressure fluctuations represent a dominant source of aircraft interior noise during cruise. The wavenumber-frequency characteristics of the TBL pressure field become important when determining its coupling with the aircraft structure and the resulting sound radiation into the interior of the aircraft. A technique is presented to estimate the TBL pressure wavenumber-frequency spectrum using a fixed probe pair consisting of two microphones. Flight test data from the McDonnel Douglas Ultra High Bypass Demonstrator aircraft were used to estimate the TBL pressure wavenumber-frequency spectra. These data were compared with selected wall pressure prediction models based on the existing wind tunnel data. The estimated in-flight spectral levels for the Demonstrator aircraft were in good agreement with the TBL wall pressure prediction models in the medium wavenumber range. The estimated TBL wavenumber spectral levels were found to be on the higher side in the low wavenumber region when compared with the predicted levels.

Mathur, Gopal P.↗

NASA NTRS1993

Accuracy considerations in the computational analysis of jet noise

The application of computational fluid dynamics methods to the analysis of problems in aerodynamic noise has resulted in the extension and adaptation of conventional CFD to the discipline now referred to as computational aeroacoustics (CAA). In the analysis of jet noise accurate resolution of a wide range of spatial and temporal scales in the flow field is essential if the acoustic far field is to be predicted. The numerical simulation of unsteady jet flow has been successfully demonstrated and many flow features have been computed with reasonable accuracy. Grid refinement and increased solution time are discussed as means of improving accuracy of Navier-Stokes solutions of unsteady jet flow. In addition various properties of different numerical procedures which influence accuracy are examined with particular emphasis on dispersion and dissipation characteristics. These properties are investigated by using selected schemes to solve model problems for the propagation of a shock wave and a sinusoidal disturbance. The results are compared for the different schemes.

Scott, James N.↗

NASA NTRS1994

Flight service evaluation of composite helicopter components

This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

Mardoian, George H.↗

NASA NTRS1994

A proposal for the intercomparison of the dynamical cores of atmospheric general circulation models

A benchmark calculation is proposed for evaluating the dynamical cores of atmospheric general circulation models (GCMs) independently of the physical parameterizations. The test focuses on the long-term statistical properties of a fully developed general circulation; thus, it is particularly appropriate for intercomparing the dynamics used in climate models. To illustrate the use of this benchmark, two very different atmospheric dynamical cores--one spectral, one finite difference--are compared. It is found that the long-term statistics produced by the two models are very similar. Selected results from these calculations are presented to initiate the intercomparison.

Held, Isaac M.↗

NASA NTRS1995

Aluminum U-groove weld enhancement based on experimental stress analyses

Though butt-welds are among the most preferred joining methods in aerostructures because of their sealing and assembly integrity and general elastic performance; their inelastic mechanics are generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. The extreme thermal expansion and contraction gradient of the fusion heat input across the tab thickness between the grooves produce severe peaking, which induces bending moment under uniaxial loading. The filler strain hardening decreased with increasing filler pass sequence. These combined effects reduce the weld strength, and a depeaking index model was developed to select filler pass thicknesses, pass numbers, and sequences to improve the welding process results over the current normal weld schedule.

Verderaime, V.↗

NASA NTRS1995

Infrared dust features of late-type stars and planetary nebulae

The author presents 16-65 micron spectra of late-type stars and proto-planetary nebulae (PPN) obtained with the Goddard 24-channel spectrophotometer from the Kuiper Airborne Observatory (KAO). The spectra of these objects contain most of the 9-13 known dust features, all discovered from the KAO, at wavelengths greater than 22 microns. The 8-100 micron spectra of a few representative objects are modeled with simple grains selected from a wide range of candidate solids. Hot sapphire is the most likely source of the 13 micron feature found in some M and MS star. Likely candidates for other features include ice, sulfides, and crystalline silicates. Also presented is a review of grain candidate materials for which optical properties in the far infrared have been measured, and a list of those for which measurements are needed.

Glaccum, W.↗

NASA NTRS1995

KRESKA: A compression system for small and very large images

An effective lossless compression system for grayscale images is presented using finite context variable order Markov models. A new method to accurately estimate the probability of the escape symbol is proposed. The choice of the best model order and rules for selecting context pixels are discussed. Two context precision and two symbol precision techniques to handle noisy image data with Markov models are introduced. Results indicate that finite context variable order Markov models lead to effective lossless compression systems for small and very large images. The system achieves higher compression ratios than some of the better known image compression techniques such as lossless JPEG, JBIG, or FELICS.

Ohnesorge, Krystyna W.↗