Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Spectral characteristics of normal and nutrient-deficient maize leaves

Reflectance, transmittance and absorbance spectra of normal and six types of mineral-deficient (N,P,K,S,Mg and Ca) maize (Zea mays L.) leaves were analyzed at 30 selected wavelengths along the electromagnetic spectrum from 500 to 2600 nm. Chlorophyll content and percent leaf moisture were also determined. Leaf thermograms were obtained for normal, N- and S- deficient leaves. The results of the analysis of variance showed significant differences in reflectance, transmittance and absorbance in the visible wavelengths among leaf numbers 3, 4, and 5, among the seven nutrient treatments, and among the interactions of leaves and treatments. In the reflective infrared wavelengths only treatments produced significant differences. The chlorophyll content of leaves was reduced in all deficiencies in comparison to controls. Percent moisture was increased in S-, Mg- and N- deficiencies. Positive correlation (r = 0.707) between moisture content and percent absorption at both 1450 and 1930 nm were obtained. Polynomial regression analysis of leaf thickness and leaf moisture content showed that these two variables were significantly and directly related (r = 0.894).

Al-Abbas, A. H.↗

Lead Pencils

A study, undertaken to determine the lead content of paint on various pencils in the Goddard supply system, is reported. The survey found that lead content varied from .04 mg per pencil for carmine colored pencils to approximately 43 mg per pencil for yellow colored pencils. Results also show that yellow pencils had higher lead content than other colors analyzed. More detailed results are given in tabular form.

Gray, L. B.↗

Study of CO2 sorbents for extravehicular activity

Portable life support equipment was studied for meeting the requirements of extravehicular activities. Previous studies indicate that the most promising method for performing the CO2 removal function removal function were metallic oxides and/or metallic hydroxides. Mgo, Ag2, and Zno metallic oxides and Mg(OH)2 and Zn(OH)2 metallic hydroxides were studied, by measuring sorption and regeneration properties of each material. The hydroxides of Mg and Zn were not regenerable and the zinc oxide compounds showed no stable form. A silver oxide formulation was developed which rapidly absorbs approximately 95% of its 0.19 Kg CO2 Kg oxide and has shown no sorption or structural degeneration through 22 regenerations. It is recommended that the basic formula be further developed and tested in large-scale beds under simulated conditions.

Colombo, G. V.↗

Noritic fragments in the Apollo 14 and 12 soils and the origin of Oceanus Procellarum.

Fragments of noritic breccias having a range of recrystallization textures and noritic basalts comprise about 80% of the 1 to 2 mm soil samples from Cone Crater (14142) and the bottom of the trench (14151). In five other samples, noritic fragments range in abundance from 42 to 56%. The remaining particles in each case are glasses, soil breccias, and glass-bonded aggregates; other crystalline rock types such as anorthosites constitute less than 1% of the soil. Noritic materials - i.e., Apollo 12 and 14 norites and ropy (KREEP) glass particles, can be divided into two broad groups on a chemical basis. The particles in one group have relatively high bulk TiO2 contents and high Fe/(Fe + Mg) ratios in their normative pyroxenes; the ropy glasses from Apollo 12 and 14 and a few Apollo 12 noritic rock fragments are in this category. Particles in the other class contain pyroxenes with a lower Fe/(Fe + Mg) and have a range of TiO2 contents; most noritic rock fragments from Apollo 12 and 14 are in this group. The ropy glasses may be from Copernicus or other rayed craters, but almost all the norites derive from the Fra Mauro formation or other noritic occurrences associated with Oceanus Procellarum.

Taylor, G. J.↗

The Apollo 15 X-ray fluorescence experiment.

The prime purpose of the X-ray fluorescence spectrometer carried in the Scientific Instrument Module of the Command-Service Module was to map the lunar surface with respect to its chemical composition. Results are presented for Al, Mg, and Si as Al/Si and Mg/Si ratios for the various features overflow by the spacecraft. The lunar surface measurements involved observations of the intensity and characteristic energy distribution of the secondary or fluorescent X rays produced by the interaction of solar X rays with the lunar surface. The results showed that the highlands and maria are chemically different, with the highlands having considerably more Al and less Mg than the maria. The mare-highland contact is quite sharp and puts a limit on the amount of horizontal transport of material. The X-ray data suggest that the dominant rock type of the lunar highlands is a plagioclase-rich pyroxene bearing rock probably anorthositic gabbro or feldspathic basalt.

Adler, I.↗

Reliability improvement of wire bonds subjected to fatigue stresses.

The failure of wire bonds due to repeated flexure when semiconductor devices are operated in an on-off mode has been investigated. An accelerated fatigue testing apparatus was constructed and the major fatigue variables, aluminum alloy composition, and bonding mechanism, were tested. The data showed Al-1% Mg wires to exhibit superior fatigue characteristics compared to Al-1% Cu or Al-1% Si and ultrasonic bonding to be better than thermocompression bonding for fatigue resistance. Based on these results highly reliable devices were fabricated using Al-1% Mg wire with ultrasonic bonding which withstood 120,000 power cycles with no failures.

Ravi, K. V.↗

Oxide minerals in lithic fragments from Luna 20 fines.

One hundred seventy-six oxide mineral grains in the Luna 20 samples were analyzed by electron microprobe. Spinel is the most abundant oxide, occurring in troctolite fragments. Next most abundant is ilmenite, which occurs in all rock types except those containing spinel. Chromite also occurs in all rock types except those containing spinel. Minor amounts of ulvospinel, armalcolite, zirkelite, baddeleyite and an unidentified TiO2-rich phase were also found. Spinel grains are predominantly spinel-hercynite solid solutions, commonly with very minor chromite. The Fe/(Fe + Mg) ratio is generally lower than in spinel from Apollo 14 rocks. Chromites in non-mare rocks are similar to those from mare rocks. Ilmenite of mare origin is Mg-poor and Zr-rich compared to non-mare ilmenite; these elements may therefore be useful in determining the origin of ilmenite grains. Phase equilibria considerations suggest that spinel troctolite crystallized from a melt high in alumina; a likely candidate is the high-alumina basalt of Prinz et al. (1973).

Brett, R.↗

Property investigation and sputter deposition of dispersion-hardened copper for fatigue specimen fabrication

Sputter-deposited alloys of dispersion-hardenable Cu-0.25 vol% SiC and Cu-0.50 vol% SiC and precipitation-hardenable Cu-0.15 wt% Zr and Cu-0.05 wt% Mg-0.15 wt% Zr-0.40 wt% Cr were investigated for selection to evaluate fatigue specimen performance with potential application in fabricating regeneratively cooled rocket thrust chambers. Yield strengths in the 700 to 1000-MN/sq m range were observed with uniform elongation ranging from 0.5 to 1.5% and necking indicative of greater ductility. Electrical conductivity measured as an analog to thermal conductivity gave values 90% IACS for Cu-0.15 wt% Zr and Cu-0.05 wt% Mg-0.15 wt% Zr-0.40 wt% Cr. A 5500-g sputtered deposit of Cu-0.15 wt% Zr alloy, 12.29 mm (0.484 in.) average thickness in the fatigue specimen gage length, was provided to NASA on one of their substrates.

Mcclanahan, E. D.↗

The effect of Mg/2+/ and Ca/2+/ on urea-catalyzed phosphorylation reactions

The effect of Mg(2+) and Ca(2+) on phosphorylation reactions catalyzed by urea is investigated, showing that Mg(2+) improves markedly the yield of products containing pyrophosphate bonds. Yields of up to 25% of uridine diphosphate can be obtained with struvite at temperatures as low as 65 C.

Handschuk, G. J.↗

A statistical-chemical and thermodynamic approach to the study of lunar mineralogy

Principal components analysis is used to study the chemical compositions of pyroxenes of five Apollo 12 specimens. Important correlations are recognized in the variation of oxide weight per cent. These correlations indicating substitutional relationships can be interpreted as representative of stable and metastable trends of crystallization by using crystal-chemical and thermodynamic information. The per cent variance of pyroxene groups with characteristic trends in each specimen can be evaluated and interpreted in terms of history of crystallization. Distribution of Fe and Mg in certain pairs of olivine and pyroxene, which are found in contact in the rock and which may have crystallized simultaneously, is useful in recognizing the tendency towards chemical equilibrium in Fe-Mg distribution during a limited interval in the liquidus or subsolidus stages.

Saxena, S. K.↗

Major and trace element abundances in samples from the lunar highlands

Analyses for major elements, REE, Co, Cr, Cs, Ga, Hf, Ni, Rb, Sc, and Zn have been done on samples of Apollo 16 rocks 60025, 60335, 64455, 65015, 67075, and 67629 and on fines 60601, 61221, 61241, 64501, 65701, 67601, and 69941. FeO, Na2O, REE, Co, Cr, Hf, and Sc have been determined in four 4-5 mg chips from 65015 and 20 individual, 2.5-9.5 mg fragments from 65702. It appears that trace element characteristics of small fragments are similar to those of larger rocks. No simple mixing relationship was found among KREEP basalts, VHA basalts, anorthosites, fines, and meteorites. Balances could not be simultaneously achieved for Al2O3 and LIL elements, using analyzed samples as end members for mixing models. Most samples analyzed have negative Eu anomalies, in contrast to the positive anomalies expected for plagioclase cumulates. Most samples may be derived from LIL-rich liquids that flowed into highland valleys.

Haskin, L. A.↗

Water hyacinths for removal of cadmium and nickel from polluted waters

Removal of cadmium and nickel from static water systems utilizing water hyacinths (Eichhornia crassipes (Mart.) Solms) was investigated. This aquatic plant demonstrated the ability to rapidly remove heavy metals from aqueous systems by root absorption and concentration. Water hyacinths demonstrated the ability to absorb and concentrate up to 0.67 mg of cadmium and 0.50 mg of nickel per gram of dry plant material when exposed for a 24-hour period to waters polluted with from 0.578 to 2.00 ppm of these toxic metals. It is found that one hectare of water hyacinths has the potential of removing 300 g of cadmium or nickel from 240,000 liters of water polluted with these metals during a 24-hour period.

Wolverton, B. C.↗

Discovery of a magnetic DA white dwarf

The spectrum of the white dwarf suspect, GD 90, is shown to contain broad Balmer lines with resolved Zeeman structure. All the observed features correspond to the calculated spectrum of hydrogen at 5 plus or minus 0.5 MG. A region of approximately 20% of the observed stellar disk must be subject to a reasonably uniform field of this strength. The sigma components of the Zeeman patterns in H beta and H gamma are found to be circularly polarized, indicating that the field has a component directed along the line of sight. There is evidence for an additional stronger and less homogeneous field, as would be expected if the dominant 5 -MG region were at the equator of a dipolar field.

Angel, J. R. P.↗

Ilmenite-orthopyroxene intergrowths from the moon and the Skaergaard intrusion

Myrmekitic or eutectic-like intergrowths of ilmenite and orthopyroxene, which texturally resemble intergrowths from nodules in kimberlites have been observed in lunar breccia 60016,92 and in 'Lower Zone' a of the Skaergaard intrusion. The lunar sample is similar in mineral chemistry to kimberlife occurrences, while the Skaergaard sample is not as Mg-rich. In all cases, however, there is a systematic distribution of Mg between orthopyroxene and ilmenite. The similar textures were formed by different processes: the lunar intergrowth is probably a eutectic-type texture resulting from crystallization of a melt, while the Skaergaard intergrowth formed by a process of sub-solidus oxidation.

Haselton, J. D.↗

Supernova 1972e in NGC 5253

Absolute energy distributions of the Type I supernova 1972e in NGC 5253 extending to about 700 days after maximum light have been obtained. A physical model of the expanding envelope, based on the identification of the feature at 6550 A with H-alpha is proposed. It consists of a differentially expanding atmosphere, with electron density ranging from 10 billion near maximum light to about 10 million 340 days later, illuminated by a photosphere with temperature in the range from 10,000 K to 7000 K. Under these conditions, the identifications of Ca II 8600-A, H, and K lines, the Na D lines, and the Mg I b lines forming P Cygni lines are quite plausible. More than 200 days after maximum, the spectrum is dominated by four features between 4200 and 5500 A. Three of these four features match the blended emissions from over 100 Fe II forbidden lines. If this identification is correct, the envelope requires about 0.01 solar mass of iron, which corresponds to an Fe/H ratio about 20 times higher than the cosmic abundance. Possible identifications of the fourth feature with the Mg I 4571-A line or permitted lines of Fe II are also discussed.

Kirshner, R. P.↗

Stellar model chromospheres. III - Arcturus /K2 III/

Models are constructed for the upper photosphere and chromosphere of Arcturus based on the H, K, and IR triplet lines of Ca II and the h and k lines of Mg II. The chromosphere model is derived from complete redistribution solutions for a five-level Ca II ion and a two-level Mg II ion. A photospheric model is derived from the Ca II wings using first the 'traditional' complete-redistribution limit and then the more realistic partial-redistribution approximation. The temperature and mass column densities for the temperature-minimum region and the chromosphere-transition region boundary are computed, and the pressure in the transition region and corona are estimated. It is found that the ratio of minimum temperature to effective temperature is approximately 0.77 for Arcturus, Procyon, and the sun, and that mass tends to increase at the temperature minimum with decreasing gravity. The pressure is found to be about 1 percent of the solar value, and the surface brightness of the Arcturus transition region and coronal spectrum is estimated to be much less than for the sun. The partial-redistribution calculation for the Ca II K line indicates that the emission width is at least partially determined by damping rather than Doppler broadening, suggesting a reexamination of previous explanations for the Wilson-Bappu effect.

Ayres, T. R.↗

Calculated diffusion coefficients and the growth rate of olivine in a basalt magma

Concentration gradients in glass adjacent to skeletal olivines in a basalt have been examined by electron probe. The glass is depleted in Mg, Fe, and Cr and enriched in Si, Al, Na, and Ca relative to that far from olivine. Ionic diffusion coefficients for the glass compositions are calculated from temperature, ionic radius and melt viscosity, using the Stokes-Einstein relation. At 1170 C, the diffusion coefficient of Mg(2+) ions in the basalt is 4.5 billionths sq cm per sec. Comparison with measured diffusion coefficients in a mugearite suggests this value may be 16 times too small. The concentration gradient data and the diffusion coefficients are used to calculate instantaneous olivine growth rates. Growth necessarily preceded emplacement such that the composition of the crystals plus the enclosing glass need not be that of a melt. The computed olivine growth rates are compatible with the rate of crystallization deduced for the Skaegaard intrusion.

Donaldson, C. H.↗

A search for chemical laser action in low pressure metal vapor flames

Optical emissions were studied from low pressure (approximately 1 torr) dilute diffusion flames of Ca and Mg vapor with O2, N2O and mixtures of CCl4 and O2. The Ca flames with O2 and N2O revealed high vibrational excitation of the product CaO molecule (up to v=30). The flames with CCl4 revealed extreme nonequilibrium metal atom electronic excitation, up to the metal atom ionization limit (6.1 eV for Ca, 7.6 eV for Mg). The metal atom excited electronic state populations did not follow a Boltzmann distribution, but the excitation rates ('pumping rate') were found to obey an Arrhenius-type expression, with the electronic excitation energy playing the role of activation energy and a temperature of about 5000 K for triplet excited states and 2500 K for singlets (vs. approximately 500 K translational temperature).

Zwillenberg, M. L.↗