SEARCH · Engineering Papers

Results for “Mass density ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1992

The bulk composition, mineralogy and internal structure of Mars

A bulk composition for Mars is derived to a pressure-dependent mineralogy. The density distribution of the present model is compared with density distributions derived from the global gravity field. It is argued that the uppermost Martian mantle is likely to be dominated by olivine and orthopyroxene, as is the earth's upper mantle, although the Martian mantle has a lower MgO/(MgO + FeO) ratio (0.74 vs 0.89). The olivine-peridotite layer extends to a depth of 900 to 1100 km where the transition to silicate spinel begins. Calculations of the high-pressure liquidus and solidus temperatures indicate that for the case of a molten core the minimum temperature at the core-mantle boundary is about 2000 K, whereas for the case of a solid core the maximum temperature is about 1800 K. Summation of the masses in the various layers of Mars yields a value of 0.353 for the dimensionless moment of inertia, which is intermediate between the generally accepted value of 0.365 and the value of 0.345 predicated on a nonaxisymmetric distribution of mass about the Tharsis plateau.

Longhi, John↗

NASA NTRS1994

An X-ray study of five supernova remnants in the Carina spiral arm

The ROSAT Position Sensitive Proportional Counter (PSPC) is used to perform an exploratory study of four fields in the Carina spiral arm containing five radio supernova remnants, only one of which has previously been studied in X-rays. We present upper limits for the detection in X-rays of G298.5 - 0.3, G298.6 - 0.0, and G299.0+0.2, and report a 4 sigma detection of G296.8-0.3. In addition, we present detailed spatial and spectral analysis of the bright X-ray remnant G296.1-0.7, which has previously been studied by both the Einstein IPC and EXOSAT LE/CMA. We detect relatively slight, but statistically significant, variations in the spectrum across the remnant via spatially resolved spectral fits and a study of the spatial variation of hardness ratios. In general, the spectrum is characteristic of a thermal plasma with kT about 0.2 keV and N(sub H) about 1.5 x 10(exp 21/sq. cm). The total X-ray emitting mass is estimated to be about 250 solar mass for an optically estimated distance of 4 kpc to the remnant. At this distance, the linear dimensions of the remnant are roughly 35 - 50 pc, implying an age on the order of 20,000 yr. Assuming that X-ray and radio brightnesses are related by SIGMA(sub R) proportional to SIGMA(exp 0.69)(sub X) and that the four radio remnants have X-ray spectral characteristics similar to G296.1-0.7, we find that the column densities to these sources must be several times 10(exp 22)/sq cm in order to explain their low X-ray count rates. This column density is considerably in excess of the X-ray fitted column density to G296.1-0.7, but is comparable to the total column densities in H I measured via the 21 cm line in the directions to all five remnants. This implies that G296.1 - 0.7 is at a significantly smaller distance than the other remnants.

Hwang, Una↗

NASA NTRS2017

A Spaceflight Experiment to Determine the Effect of Chamfered Sample Holders on Atomic Oxygen Erosion

The exteriors of low Earth orbit (LEO) spacecraft are subjected to many environmental threats that can cause the surface materials to degrade. One of these threats is atomic oxygen (AO), which is formed by photo dissociation of molecular oxygen by energetic UV radiation. Atomic oxygen exposure can result in oxidative erosion of polymers leading to structural or thermal failure of spacecraft components. The amount of AO erosion expected during a mission can be calculated by knowing the AO erosion yield (Ey, volume loss per incident atom) of the material and the AO fluence expected for the mission. The Ey can be determined through dehydrated mass loss measurements of test samples if one knows the AO fluence, density, and exposure area. Such measurements have been made as part of flight experiments, including the Materials International Space Station Experiment 2 (MISSE 2) Polymers Experiment. The MISSE 2 Polymers Experiment sample holders had chamfered circular apertures that controlled the exposure area, but also allowed some additional AO to scatter from the chamfered edges onto the samples thus causing some samples to erode thru and peel at their perimeter due to this scattering effect. By modeling the scattered AO flux one can predict the actual total AO fluence, and hence more accurate sample Ey. Sample holders with different chamfered-perimeter to exposed-area ratios have been designed for future spaceflight experiments that allow a more accurate determination of the Ey for large area polymers, representative of their use on spacecraft surfaces.

Earth Orbital Environments↗

DOE OSTI2021

Gravito-turbulence and dynamo in poorly ionized protostellar discs – I. Zero-net-flux case

In their early stages, protoplanetary discs are sufficiently massive to undergo gravitational instability (GI). This instability is thought to be involved in mass accretion, planet formation via gas fragmentation, the generation of spiral density waves, and outbursts. A key and very recent area of research is the interaction between the GI and magnetic fields in young protoplanetary discs, in particular whether this instability is able to sustain a magnetic field via a dynamo. We conduct 3D, stratified shearing-box simulations using two independent codes, PLUTO and Athena++, to characterize the GI dynamo in poorly ionized protostellar discs subject to ambipolar diffusion. We find that the dynamo operates across a large range of ambipolar Elssaser number Am (which characterizes the strength of ambipolar diffusion) and is particularly strong in the regime Am = 10–100, with typical magnetic to thermal energy ratios of order unity. The dynamo is only weakly dependent on resolution (at least for Am ≲ 100), box size, and cooling law. The magnetic field is produced by the combination of differential rotation and large-scale vertical roll motions associated with spiral density waves. Our results have direct implications for the dynamo process in young protoplanetary discs and possibly some regions of active galactic nucleus discs.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1984

Radio emission from the outer parts of stellar atmospheres (mantles) at centimeter wavelengths and the winds of early-type stars

It is noted that when magnetic lines of force are present in the mantle of an early-type star, gyroresonance radiation at radio wavelengths may occur at detectable levels in addition to bremsstrahlung. An expression is derived for the effective value of the ratio of the emissivity in gyroresonance radiation to that in bremsstrahlung, and some numerical values are estimated using values of the parameters which may be typical for conditions in the mantles of early-type stars. The volume emissivity in gyroresonance radiation may exceed that for bremsstrahlung by a large factor. The implications of this result for the interpretation of the radio fluxes from early-type stars are discussed. It is shown that the radio-frequency radiation emerging from a hot star probably consists of gyroresonance radiation from an array of magnetic loops as well as bremsstrahlung from a low-density wind. It is argued that it is probable that the estimates of rate of mass loss made ignoring the possibility of gyroresonance radiation may be too large by a factor of at least 10.

Underhill, A. B.↗

NASA NTRS2005

Carbon Nanotubes/Nanofibers by Plasma Enhanced Chemical Vapour Deposition

Plasma enhanced chemical vapour deposition (PECVD) has been recently used for the production of vertically aligned carbon nanotubedfibers (CN) directly on substrates. These structures are potentially important technologically as electron field emitters (e.g. microguns, microwave amplifiers, displays), nanoelectrodes for sensors, filter media, superhydrophobic surfaces and thermal interface materials for microelectronics. A parametric study on the growth of CN grown by glow discharge dc-PECVD is presented. In this technique, a substrate containing thin film Ni catalyst is exposed to C2H2 and NH3 gases at 700 C. Without plasma, this process is essentially thermal CVD which produces curly spaghetti-like CN as seen in Fig. 1 (a). With the plasma generated by biasing the substrate at -6OOV, we observed that the CN align vertically during growth as shown in Fig. l(b), and that the magnitude of the applied substrate bias affects the degree of alignment. The thickness of the thin film Ni catalyst was found to determine the average diameter and inversely the length of the CN. The yield and density of the CN were controlled by the use of different diffusion barrier materials under the Ni catalyst. Patterned CN growth [Fig. l(c)], with la variation in CN diameter of 4.1% and 6.3% respectively, is achieved by lithographically defining the Ni thin film prior to growth. The shape of the structures could be varied from very straight nanotube-like to conical tip-like nanofibers by increasing the ratio of C2H2 in the gas flow. Due to the plasma decomposition of C2H2, amorphous carbon (a-C) is an undesirable byproduct which could coat the substrate during CN growth. Using a combination of depth profiled Auger electron spectroscopy to study the substrate and in-situ mass spectroscopy to examine gas phase neutrals and ions, the optimal conditions for a-C free growth of CN is determined.

Teo, K. B. K.↗

DOE OSTI2025

Multiplicity dependence of (multi-)strange hadrons in oxygen-oxygen collisions at $\sqrt{s_{NN}}$ TeV using EPOS4 and AMPT

It is anticipated that the Large Hadron Collider (LHC) will collect data from oxygen-oxygen (O+O) collisions at a center-of-mass energy of $\sqrt{s_{NN}}$ = 7 TeV to explore the effects observed in high multiplicity proton-proton (p+p) and proton-lead (p+pb) collisions that closely related to lead-lead (Pb+Pb) collisions. Furthermore, these effects include azimuthal asymmetries in particle production, as well as variations in the abundances and momentum distributions across different hadron species, which are indicative of collective particle production mechanisms induced by the interactions in the presence of a QGP. The upcoming data on O+O collisions at the LHC are expected to constrain the model parameters and refine our understanding of theoretical models. In this work, the predicted transverse momentum (p T ) spectra, rapidity density distributions (dN/dy), particle yield ratios, and p T -differential ratios of (multi)strange hadrons produced in O+O collisions at $\sqrt{s_{NN}}$ = 7 TeV using AMPT and EPOS4 models are presented. AMPT focuses on preformed hadronic interactions, while EPOS4 incorporates a QGP phase. Stronger radial flow in EPOS4 as compared to AMPT is also observed. AMPT incorporates some flow effects, but the implementation of full hydrodynamic flow in EPOS4 appears to be significantly more effective in reproducing the existing experimental data. Both models predict the final state multiplicity overlap with p+p, p+pb, and Pb+Pb collisions.

Heavy-ion collisions↗

DOE OSTI2021

Structural organization of space polymers

Extraterrestrial polymers of glycine with iron have been characterized by mass spectrometry to have a core mass of 1494 Da with dominant rod-like variants at mass to charge ratios of 1567 and 1639 [McGeoch et al., “Meteoritic proteins with glycine, iron and lithium,” arXiv:2102.10700 (2021)]. Several principal macro-structural morphologies are observed in solvent extracts from a chondritic Vigarano class alteration type 3 meteoritic material. The first is an extended sheet of linked (three-legged) triskelia containing the 1494 Da core entity that encloses gas bubbles in the solvent. A second is of fiber-like crystals found here, via x-ray diffraction, to be multiple-walled nanotubes made from a square lattice of the 1494 Da polymer. A third is a dispersion of floating phantom-like short tubes of up to 100 μm length with characteristic angled bends that suggest the influence of a specific underlying protein structure. Here, it is proposed that the angled tubes are the observable result of a space-filling superpolymerization of 1638 Da polymer subunits guided by the tetragonal symmetry of linking silicon bonds. Distorted hexagonal sheets are linked by perpendicular subunits in a three-dimensional hexagonal diamond structure to fill the largest possible volume. This extended very low-density structure is conjectured to have dominated in a process of chemical selection because it captured a maximum amount of molecular raw material in the ultra-low density of molecular clouds or of the proto-solar nebula. This could have led ultimately to the accretion of the earliest planetary bodies.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Ratio-preserving approach to cosmological concordance

Cosmological observables are particularly sensitive to key ratios of energy densities and rates, both today and at earlier epochs of the Universe. Well-known examples include the photon-to-baryon and the matter-to-radiation ratios. Equally important, though less publicized, are the ratios of pressure-supported to pressureless matter and the Thomson scattering rate to the Hubble rate around recombination, both of which observations tightly constrain. Preserving these key ratios in theories beyond the Λ Cold-Dark-Matter ( Λ CDM ) model ensures broad concordance with a large swath of datasets when addressing cosmological tensions. We demonstrate that a mirror dark sector, reflecting a partial Z 2 symmetry with the Standard Model, in conjunction with percentage level changes to the visible fine-structure constant and electron mass which represent a phenomenological change to the Thomson scattering rate, maintains essential cosmological ratios. Incorporating this ratio-preserving approach into a cosmological framework significantly improves agreement to observational data ( Δ χ 2 = - 35.72 ) and completely eliminates the Hubble tension with a cosmologically inferred H 0 = 73.80 ± 1.02 km / s / Mpc when including the S H 0 ES calibration in our analysis. While our approach is certainly nonminimal, it emphasizes the importance of keeping key ratios constant when exploring models beyond Λ CDM .

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Enhanced Production of Λ b 0 Baryons in High-Multiplicity p p Collisions at s = 13 TeV

The production rate of Λ b 0 baryons relative to B 0 mesons in p p collisions at a center-of-mass energy s = 13 TeV is measured by the LHCb experiment. The ratio of Λ b 0 to B 0 production cross sections shows a significant dependence on both the transverse momentum and the measured charged-particle multiplicity. At low multiplicity, the ratio measured at LHCb is consistent with the value measured in e + e − collisions, and increases by a factor of ∼ 2 with increasing multiplicity. At relatively low transverse momentum, the ratio of Λ b 0 to B 0 cross sections is higher than what is measured in e + e − collisions, but converges with the e + e − ratio as the momentum increases. These results imply that the evolution of heavy b quarks into final-state hadrons is influenced by the density of the hadronic environment produced in the collision. Comparisons with several models and implications for the mechanisms enforcing quark confinement are discussed. © 2024 CERN, for the LHCb Collaboration 2024 CERN

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Scaling CFB risers: Maintaining microstructure dynamics

Over the years there have been numerous approaches to develop a scaleup methodology for circulating fluidized beds. Many of these past approaches have relied on macroscopic definitions of similitude to define dimensionless groups such as Reynolds number, Froude number, density ratios, and dimensional ratios involving different length scales. These approaches have demonstrated various levels of success, but often fail when used outside the bounds of experimental datasets. The issue with these methods is that they rely on macroscopic similitude with the hopes that those conditions would provide microscopic similitude as it does in single phase systems where the Buckingham Pi techniques have given reasonable success. Two of the main reasons for failure are 1) changing fluidization regimes and 2) changing material properties that result in the material falling into a different Geldart group. Both are certain to change the microstructure (local instantaneous volume solids fraction) and changes to the microstructure affect the interphase transport properties of the reactor system, namely the mass transfer and heat transfer. Here, this work presents a new approach towards scaling based upon maintaining similitude at the microscale. It reviews a novel dimensionless flow regime map developed from analysis of the deterministic chaos parameters and higher order moments to ensure microstructure similitude. The work then examines four cases from the literature to assess the scaling approach used: (1) same particle-different scale risers for Geldart Group B particles, (2) Glicksman scaling of atmospheric circulating fluidized bed combustor, (3) same particle-different scale risers for Geldart Group A particles and (4) Glicksman scaling for pressurized gasification. General findings are that none of the scaling approaches produced directly applicable microstructure similar behavior based upon the chaotic and higher moment analysis. The positive take away is that the approach can define scale conditions that will provide similar microstructure that can be us to predict transport behavior.

42 ENGINEERING↗

DOE OSTI2026

Nuclear–Electronic Orbital General Rate Theory: Predicting Hydrogen Kinetic Isotope Effects in the Deep Tunneling Regime

Hydrogen transfer is a critical component of many chemical and biological processes. The ratio of rate constants for hydrogen and deuterium transfer defines the H/D kinetic isotope effect (KIE), which is a powerful tool for elucidating hydrogen transfer mechanisms. Interpretation of experimental H/D KIEs relies on accurate and affordable computational methods. However, due to their light mass, hydrogen and deuterium can undergo tunneling, which is challenging to describe in multidimensional molecular systems. Herein, we introduce the nuclear–electronic orbital general rate theory (NEO-GRT), which enables the efficient prediction of H/D KIEs based on full-dimensional molecular quantum chemistry calculations. The NEO-GRT approach describes the hydrogen transfer rate constant with a general expression that spans the vibrationally adiabatic and nonadiabatic hydrogen tunneling regimes. The input quantities are computed using NEO density functional theory, which treats the transferring hydrogen or deuterium nucleus quantum mechanically on the same level as the electrons. We investigate two intramolecular proton transfer reactions in organic molecules at temperatures down to 50 K to evaluate the performance of NEO-GRT by comparison to transition state theory and ring-polymer instanton theory. The KIEs computed with NEO-GRT agree with those calculated using ring-polymer instanton theory for the full-dimensional molecular systems at the same level of electronic structure theory. This agreement indicates that NEO-GRT captures the deep hydrogen tunneling effects, in contrast to transition state theory, which neglects such effects. Given its relatively low computational cost, NEO-GRT is a promising approach for predicting H/D KIEs in large organic and organometallic systems.

Hydrogen↗

DOE OSTI2022

Understanding methanol dissociative adsorption and oxidation on amorphous oxide films

Interactions between a transition metal (oxide) catalyst and a support can tailor the number and nature of active sites, for instance in the methanol oxidation reaction.In this report we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to identify and compare the surface adsorbates that form on amorphous metal oxide films that maximize such interactions. Considering Al (1−x) M x O y (M = Fe or Mn) films at a range of methanol : oxygen gas ratios and temperatures, we find that the redox-active transition metal site (characterized by methoxy formation) dominates dissociative methanol adsorption, while basic oxygen sites (characterized by carbonate formation) play a lesser role. Product detection, however, indicates complete oxidation to carbon dioxide and water with partial oxidation products (dimethyl ether) comprising a minor species. Comparing the intensity of methoxy and hydroxyl features at a fixed XPS chemical shift suggests methanol deprotonation during adsorption in oxygen rich conditions for high transition metal content. However, increasing methanol partial pressure and lower metal site density may promote oxygen vacancy formation and the dehydroxylation pathway, supported by a nominal reduction in the oxidation state of iron sites. These findings illustrate that AP-XPS and mass spectrometry together are powerful tools in understanding metal–support interactions, quantifying and probing the nature of catalytic active sites, and considering the link between electronic structure of materials and their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1993

CO2 lidar backscatter experiment

The Aerosol/Lidar Science Group of the Remote Sensing Branch engages in experimental and theoretical studies of atmospheric aerosol scattering and atmospheric dynamics, emphasizing Doppler lidar as a primary tool. Activities include field and laboratory measurement and analysis efforts by in-house personnel, coordinated with similar efforts by university and government institutional researchers. The primary focus of activities related to understanding aerosol scattering is the GLObal Backscatter Experiment (GLOBE) program. GLOBE was initiated by NASA in 1986 to support the engineering design, performance simulation, and science planning for the prospective NASA Laser Atmospheric Wind Sounder (LAWS). The most important GLOBE scientific result has been identified of a background aerosol mode with a surprisingly uniform backscatter mixing ratio (backscatter normalized by air density) throughout a deep tropospheric layer. The backscatter magnitude of the background mode evident from the MSFC CW lidar measurements is remarkably similar to that evident from ground-based backscatter profile climatologies obtained by JPL in Pasadena CA, NOAA/WPL in Boulder CO, and by the Royal Signals and Radar Establishment in the United Kingdom. Similar values for the background mode have been inferred from the conversion of in situ aerosol microphysical measurements to backscatter using Mie theory. Little seasonal or hemispheric variation is evident in the survey mission data, as opposed to large variation for clouds, aerosol plums, and the marine boundary layer. Additional features include: localized aerosol residues from dissipated clouds, occasional regions having mass concentrations of nanograms per cubic meter and very low backscatter, and aerosol plumes extending thousands of kilometers and several kilometers deep. Preliminary comparison with meteorological observations thus far indicate correlation between backscatter and water vapor under high humidity conditions. Limited intercomparisons with the Stratospheric Aerosol and Gas Experiment (SAGE) limb extinction sounder shows differences in the troposphere, however, it should be noted that in general SAGE measurements have not yet been validated in the troposphere.

Jarzembski, Maurice A.↗

NASA NTRS2011

Microwave Spectroscopy of Complex Molecules Around the Young Protostar Chamaeleon MMS1

Observations are presented of emission lines from organic molecules at frequencies 30-100 GHz in the vicinity of the extremely young, chemically rich, very low-luminosity protostar and candidate first hydrostatic core Chamaeleon MMS1. Column densities are derived and emission maps are presented for species including polyynes, cyanopolyynes, sulphuretted carbon-chains and methanol. Emission from the carbon-chain-bearing species peaks very near to the protostar; methanol peaks about 0.1 pc further away. The mean molecular hydrogen number density is calculated to be 10(exp 6) per cc. and the gas kinetic temperature is in the range 4-7 K. The abundances of long carbon chains (including C6H and HC7N) are very large -- similar to those found in the most carbon-chain-rich regions of the Galaxy, and indicative of a non-equilibrium carbon chemistry. The observed methanol and acetaldehyde abundances indicate active grain-surface chemistry and desorption processes. The carbon-chain anions C4H- and C6H- were not detected and the upper limit on the anion-to-neutral ratio for C4H- is less than 0.02% and for C6H-, less than 10%. These values are consistent with previous observations in interstellar clouds and low-mass protostars. Deuterated HC3N and c-C3H2 were detected, with fractionation ratios of about 4%, and 22%, respectively. A low c-C3H2 ortho-to-para ratio was measured, which is consistent with a molecular hydrogen ortho-to-para ratio of close to zero and implies a relatively young chemical age (less than about 10(exp 5) yr) for the matter surrounding Cha-MMS1. These observations show that a high level of chemical complexity can be present in star-forming gas.

Cordiner, Martin A.↗

NASA NTRS2012

Entry, Descent, and Landing for Human Mars Missions

One of the most challenging aspects of a human mission to Mars is landing safely on the Martian surface. Mars has such low atmospheric density that decelerating large masses (tens of metric tons) requires methods that have not yet been demonstrated, and are not yet planned in future Mars missions. To identify the most promising options for Mars entry, descent, and landing, and to plan development of the needed technologies, NASA's Human Architecture Team (HAT) has refined candidate methods for emplacing needed elements of the human Mars exploration architecture (such as ascent vehicles and habitats) on the Mars surface. This paper explains the detailed, optimized simulations that have been developed to define the mass needed at Mars arrival to accomplish the entry, descent, and landing functions. Based on previous work, technology options for hypersonic deceleration include rigid, mid-L/D (lift-to-drag ratio) aeroshells, and inflatable aerodynamic decelerators (IADs). The hypersonic IADs, or HIADs, are about 20% less massive than the rigid vehicles, but both have their technology development challenges. For the supersonic regime, supersonic retropropulsion (SRP) is an attractive option, since a propulsive stage must be carried for terminal descent and can be ignited at higher speeds. The use of SRP eliminates the need for an additional deceleration system, but SRP is at a low Technology Readiness Level (TRL) in that the interacting plumes are not well-characterized, and their effect on vehicle stability has not been studied, to date. These architecture-level assessments have been used to define the key performance parameters and a technology development strategy for achieving the challenging mission of landing large payloads on Mars.

Munk, Michelle M.↗

DOE OSTI2023

A semi-analytic study of self-interacting dark-matter haloes with baryons

ABSTRACT We combine the isothermal Jeans model and the model of adiabatic halo contraction into a semi-analytic procedure for computing the density profile of self-interacting dark-matter (SIDM) haloes with the gravitational influence from the inhabitant galaxies. The model agrees well with cosmological SIDM simulations over the entire core-forming stage up to the onset of gravothermal core-collapse. Using this model, we show that the halo response to baryons is more diverse in SIDM than in CDM and depends sensitively on galaxy size, a desirable feature in the context of the structural diversity of bright dwarfs. The fast speed of the method facilitates analyses that would be challenging for numerical simulations – notably, we quantify the SIDM halo response as functions of the baryonic properties, on a fine mesh grid spanned by the baryon-to-total-mass ratio, Mb/Mvir, and galaxy compactness, r1/2/Rvir; we show with high statistical precision that for typical Milky-Way-like systems, the SIDM profiles are similar to their CDM counterparts; and we delineate the regime of core-collapse in the Mb/Mvir − r1/2/Rvir space, for a given cross section and concentration. Finally, we compare the isothermal Jeans model with the more sophisticated gravothermal fluid model, and show that the former yields faster core formation and agrees better with cosmological simulations. We attribute the difference to whether the target CDM halo is used as a boundary condition or as the initial condition for the gravothermal evolution, and thus comment on possible improvements of the fluid model. We have made our model publicly available at https://github.com/JiangFangzhou/SIDM.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Current Source Inverter Based Large Constant Power Speed Ratio SPM Machine Drive for Traction Applications

A high-performance surface permanent magnet (SPM) machine drive with an extended constant power speed ratio is proposed using a current source inverter (CSI) for a traction application. The constant-power operation regions of an SPM machine can be extended in an appealing fashion by taking advantage of the output voltage boost capability of the CSI. The CSI is naturally a boost-type converter, in contrast to the voltage source inverter (VSI) which has buck-type characteristics. To investigate the value of the CSI voltage boost feature, a new traction motor with higher rated voltage and lower rated current has been designed and compared to the motor that would be used with a VSI. The lower CSI current makes it possible to reduce the mass of the inverter and output power cable, benefiting power density and cost reduction. The SPM machine is modeled in the synchronous reference frame including the effect of the ac filter capacitors at the CSI output terminals. The capability of extending the speed range of the proposed motor is verified via closed-form analysis and FEA simulation, and its performance characteristics are compared with those of a VSI-based SPM motor of the same type.

42 ENGINEERING↗