Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mars mission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Precision X-Band Doppler and Ranging Navigation For Current and Future Mars Exploration Missions

This paper describes a navigation error convariance analysis of two scenarios derived from the Mars Observer mission and the planned Mars Environmental Survey (MESUR) Pathfinder mission, respectively. The analysis was performed to establish the potential navigational performance of the X-band tracking system in NASA's Deep Space Network, and to evaluate the sensitivity of the Predicted performance to variations in the quantity of data acquired, the ground system error modeling assumptions, and data reduction schemes.

Precision↗
NASA NTRS1994

Rationale for Isidis Planitia as a back-up landing site for the Mars Pathfinder mission

The present engineering constraints imposed on the Mars Pathfinder mission leave only three broad regions available for site selection: Amazonis, Chryse, and Isidis Planitia. Because of the knowledge gained by the Viking 1 mission, Chryse Planitia would make an ideal primary landing site. Geological characteristics of Isidis Planitia are discussed with a view to making it a back-up landing site.

Craddock, Robert A.↗
NASA NTRSDate not supplied

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

The Mars Sample Return Campaign must satisfy a Back Planetary Protection requirement that limits the risk of biological contamination of the Earth by Martian microbes. The Earth Re-turn Orbiter (ERO), being developed by the European Space Agency (ESA), will carry a Capture, Containment and Return System (CCRS), which is being developed by NASA to retrieve orbiting samples (OS) from Mars orbit, surround them with two containment layers to create a Contained OS (COS), and transfer the COS to the Earth Entry System (EES), which will be re-leased by ERO to carry the samples through entry, descent and landing at the Utah Test and Training Range. Micrometeoroid impact damage to the Thermal Protection System (TPS) of the EES, which may occur at any time in the ERO mission, is recognized as a potential risk driver for loss of sample containment that needs to be rigorously assessed. A Micrometeoroid Protection System (MMPS) will be implemented to limit that risk. The MMPS consists of a shield covering the TPS called the Micrometeoroid Garage (MMG) and a system of cameras to inspect the TPS. An extensive study was performed by the CCRS Project in collaboration with the NASA Engineering and Safety Center (NESC)to assess the probability of damage to the MMG and TPS by meteoroids over the entire ERO mission. This included the computation of the meteoroid fluence on the MMG and directly on the TPS after EES separation, and assessment of damage to the MMG and TPS via hypervelocity impact tests, hydrocode simulations, and empirical damage prediction and ballistic limit equations (BLEs). The focus of this paper is the meteoroid fluence on the MMG.

micrometeoroid↗
NASA NTRSDate not supplied

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

The Mars Sample Return Campaign must satisfy a Back Planetary Protection requirement that limits the risk of biological contamination of the Earth by Martian microbes. The Earth Re-turn Orbiter (ERO), being developed by the European Space Agency (ESA), will carry a Capture, Containment and Return System (CCRS), which is being developed by NASA to retrieve orbiting samples (OS) from Mars orbit, surround them with two containment layers to create a Contained OS (COS), and transfer the COS to the Earth Entry System (EES), which will be re-leased by ERO to carry the samples through entry, descent and landing at the Utah Test and Training Range. Micrometeoroid impact damage to the Thermal Protection System (TPS) of the EES, which may occur at any time in the ERO mission, is recognized as a potential risk driver for loss of sample containment that needs to be rigorously assessed. A Micrometeoroid Protection System (MMPS) will be implemented to limit that risk. The MMPS consists of a shield covering the TPS called the Micrometeoroid Garage (MMG) and a system of cameras to inspect the TPS. An extensive study was performed by the CCRS Project in collaboration with the NASA Engineering and Safety Center (NESC)to assess the probability of damage to the MMG and TPS by meteoroids over the entire ERO mission. This included the computation of the meteoroid fluence on the MMG and directly on the TPS after EES separation, and assessment of damage to the MMG and TPS via hypervelocity impact tests, hydrocode simulations, and empirical damage prediction and ballistic limit equations (BLEs). The focus of this paper is the meteoroid fluence on the MMG.

Micrometeoroid↗
NASA NTRS2016

Mars 2020 Entry, Descent and Landing Instrumentation 2 (MEDLI2)

This paper introduces the Mars Entry Descent and Landing Instrumentation 2 (MEDLI2) concept for NASAs Mars 2020 mission. Mars 2020 is a flagship-class mission, scheduled for launch in 2020, with science and technology objectives to help answer questions about habitability of Mars as well as to demonstrate technologies for future human expedition. MEDLI2 is a suite of instruments embedded in the heatshield and backshell thermal protection systems (TPS) of the Mars 2020 entry vehicle. The objectives of MEDLI2 are to gather critical aerodynamics, aerothermodynamics and TPS (Thermal Protective System) performance data during the Entry Descent and Landing (EDL) phase of the mission.

Aerothermodynamics↗
NASA NTRSDate not supplied

In-Space Transportation Sensitivity to Roundtrip Mission Duration and Mars Vicinity Stay Time

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon-to-Mars Strategy & Objectives. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and returns the crew safely back to Earth. The Mars Architecture Team within ESDMD’s Strategy and Architecture Office has been evaluating multiple in-space transportation options to satisfy this functional need. The first step of this evaluation is to understand key architectural drivers for in-space transportation systems. Lunar and Mars missions have unique challenges, and systems designed for one may not be directly applicable to the other as they have different energy and mission needs. In addition, the time and distance for a Mars mission will be drastically different from the historical and current programs, requiring a new paradigm for mission architects. This paper investigates the impact of mission duration on a variety of different transportation options. As mission duration decreases, the total energy required to perform a roundtrip Mars mission increases exponentially, significantly increasing the required Earth departure mass. Sensitivity analyses of various in-space transportation system concepts were shown in this paper to begin mapping out the in-space transportation trade space. Each of the transportation systems has its own strengths and weaknesses, especially in the context of the continuous mission duration and vicinity stay time trade space. Although mission duration and Mars vicinity stay time may be key architecture drivers from an in-space transportation perspective, the decision of acceptable mission duration cannot be made solely from this perspective. Mission duration also has tangible impacts to crew health and performance, as well as system reliability and other key architecture considerations. The integrated nature of the architecture decision road map will be the primary focus of the Mars Architecture Team in the coming analysis cycle. This in-space transportation analysis will serve as the first guidepost of this critical activity that will guide the Moon-to-Mars Architecture into the humans to Mars segment.

Mars↗
NASA NTRSDate not supplied

In-Space Transportation Sensitivity to Roundtrip Mission Duration and Mars Vicinity Stay Time

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon-to-Mars Strategy & Objectives. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and returns the crew safely back to Earth. The Mars Architecture Team within ESDMD’s Strategy and Architecture Office has been evaluating multiple in-space transportation options to satisfy this functional need. The first step of this evaluation is to understand key architectural drivers for in-space transportation systems. Lunar and Mars missions have unique challenges, and systems designed for one may not be directly applicable to the other as they have different energy and mission needs. In addition, the time and distance for a Mars mission will be drastically different from the historical and current programs, requiring a new paradigm for mission architects. This paper investigates the impact of mission duration on a variety of different transportation options. As mission duration decreases, the total energy required to perform a roundtrip Mars mission increases exponentially, significantly increasing the required Earth departure mass. Sensitivity analyses of various in-space transportation system concepts were shown in this paper to begin mapping out the in-space transportation trade space. Each of the transportation systems has its own strengths and weaknesses, especially in the context of the continuous mission duration and vicinity stay time trade space. Although mission duration and Mars vicinity stay time may be key architecture drivers from an in-space transportation perspective, the decision of acceptable mission duration cannot be made solely from this perspective. Mission duration also has tangible impacts to crew health and performance, as well as system reliability and other key architecture considerations. The integrated nature of the architecture decision road map will be the primary focus of the Mars Architecture Team in the coming analysis cycle. This in-space transportation analysis will serve as the first guidepost of this critical activity that will guide the Moon-to-Mars Architecture into the humans to Mars segment.

Mars↗
NASA NTRS1999

Lithium Ion Batteries for Mars Exploration Missions

The desired performance characteristics and physical requirements of spacecraft batteries for planetary exploration are reviewed, particularly with respect to surface landers and rovers intended for near-future Mars missions.

rechargeable↗
DOE OSTI2024

Demonstrating autonomous controls on hardware test beds is a necessity for successful missions to Mars and beyond

NASA and the Department of Defense are planning for a mission to Mars in the 2030s–2040s using nuclear thermal propulsion (NTP). NTP uses a nuclear reactor to heat flowing hydrogen and create thrust. A serious concern for crewed and uncrewed missions to Mars is the loss of reactor control. The reactor startup and initial rocket impulse are initiated in cislunar or near-earth orbital regions; therefore, radio communications between ground control and the NTP engine should occur in real time. However, radio communications can take more than 20 min, depending on planet positions, to reach Mars orbiters from ground control. To address this delay, local autonomous controls are implemented onboard the NTP engine to ensure acceptable operation. However, autonomous controls have not been demonstrated or implemented in research or power reactor contexts because of safety and reliability concerns. To enable autonomous controls development, demonstration, and validation, Oak Ridge National Laboratory has created a nonnuclear hardware-in-the-loop test bed. Sensors throughout the test bed relay system status and hardware response to the user control algorithm, including measurements of temperature, flow, pressure of a loop, control drum position, and drum speed. This paper discusses the development of this facility and user accessibility.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2001

Overview of the Mars Global Surveyor mission

The Mars Global Surveyor spacecraft was placed into Mars orbit on September 11, 1997, and by March 9, 1999, had slowly circularized through aerobraking to a Sun-synchronous, near-polar orbit with an average altitude of 378 km.

Mars↗
NASA NTRS2017

A Water Rich Mars Surface Mission Scenario

The surface of Mars once had abundant water flowing on its surface, but now there is a general perception that this surface is completely dry. Several lines of research have shown that there are sources of potentially large quantities of water at many locations on the surface, including regions considered as candidates for future human missions. Traditionally, system designs for these human missions are constrained to tightly recycle water and oxygen, and current resource utilization strategies involve ascent vehicle oxidizer production only. But the assumption of relatively abundant extant water may change this. Several scenarios were constructed to evaluate water requirements for human Mars expeditions to assess the impact to system design if locally produced water is available. Specifically, we have assessed water resources needed for 1) ascent vehicle oxidizer and fuel production, 2) open-loop water and oxygen life support requirements along with more robust usage scenarios, and 3) crew radiation protection augmentation. In this assessment, production techniques and the associated chemistry to transform Martian water and atmosphere into these useful commodities are identified, but production mass and power requirements are left to future analyses. The figure below illustrates the type of water need assessment performed and that will be discussed. There have been several sources of feedstock material discussed in recent literature that could be used to produce these quantities of water. This paper will focus on Mars surface features that resemble glacier-like forms on Earth. Several lines of evidence indicate that some of these features are in fact buried ice, likely remnants from an earlier ice age on Mars. This paper examines techniques and hardware systems used in the polar regions of Earth to access this buried ice and withdraw water from it. These techniques and systems will be described to illustrate options available. A technique known as a Rodriguez Well is assessed as a likely method for extracting water from these bodies of ice. The figure below is a sample of results from this assessment that will be discussed.

Hoffman, Stephen↗
NASA NTRS1997

Cryogenics and the Human Exploration of Mars

Current plans within NASA involve extending the human exploration of space from low earth orbit into the solar system, with the first human exploration of Mars presently planned in 2011. Integral to all hum Mars mission phases is cryogenic fluid management. Cryogenic fluids will be required both as propellant and for In-Situ Resource Utilization (ISRU). Without safe and efficient cryogen storage human Mars missions will not be possible. Effective control and handling of cryogenic fluids is the key to affordable Mars missions, and advancing active thermal control technology is synergistic with all of NASA's exploration initiatives and with existing and future instrument cooling programs, including MTPE and Origins. Present mission scenarios for human exploration require cryogenic propellant storage for up to 1700 days and for up to 60 metric tons. These requirements represent increases of an order of magnitude over previous storage masses and lifetimes. The key cryogenic terminology areas to be addressed in human Mars missions are long-term propellant storage, cryogenic refrigeration, cryogenic liquefaction, and zero gravity fluid management. Long-term storage for the thermal control of cryogenic propellants is best accomplished with a mix of passive and active technologies. Passive technologies such as advanced multilayer insulation (MLI) concepts will be combined with the development of active coolers (cryogenic refrigerators). Candidates for long-life active cooling applications include Reverse Turbo-Brayton, Stirling, and Pulse-Tube coolers. The integration of passive and active technologies will form a hybrid system optimized to minimize the launch mass while preserving the cryogenic propellants. Since cryogenic propellants are the largest mass that Mars missions must launch from earth, even a modest reduction in the percentage of propellant carried results in a significant weight saving. This paper will present a brief overview of cryogenic fluid management technology as it applies to the current human Mars mission scenarios.

Salerno, Louis J.↗
NASA NTRS1995

Mars Surveyor Missions: 2001 and Beyond

NASA's Mars Surveyor Program (MSP) will launch two mission to the red planet about every 26 months (determined by energy considerations) from 1996 through 2005 at an annual cost of $100 million dollars per year (excluding the launch vehicles). Mars Global Survey (1996) and Mars Surveyor 98 are described in other papers. This paper will focus on the planning that is under way for the MSP missions to be launched in 2001 and beyond.

Mars Surveyor↗
NASA NTRS2019

Maintaining Skeletal Health During the Mission to Mars

Understanding how the effects of long-duration spaceflight (~6-months) might increase fracture risk in the younger-aged, physically-fit astronaut is challenging. Most of our skeletal data have been acquired from long-duration astronauts, crewmembers who typically serve on 120-180 day missions aboard the International Space Station (ISS). Astronaut biomedical data are predominantly 2-d measurements from DXA scans because this is a required clinical test at Johnson Space Center. Data from these clinical tests, and some data from research studies, are what NASA evaluates to define a risk for fracture in astronauts, both during a mission and long-term health. To date, the agency considers the risk for fracture during spaceflight to be of high (severe) consequence but of low probability (<0.1%) while the risk for fracture in during long-term health to be of medium consequence (interventions available) and medium probability (<1%). These risks are considered acceptable. Notably, there are minimal data to suggest that postflight fractures in long-duration astronauts are directly due to spaceflight exposure. Analyses by NASA epidemiologists and by biomedical engineers suggest that postflight fracture incidence in astronauts is consistent with a physically-active terrestrial population with no exposure to spaceflight. The epidemiological data to-date may be considered insufficient (low # and younger-aged subjects, limited follow-up time) to assess a fracture risk with reliability. In the absence of fracture evidence to substantiate a risk, it may be more useful to maintain astronauts at baseline (preflight) level of skeletal health during a mission. This lecture will present data from astronauts that affirms that 1) the maintenance of skeletal health during the future 3-year Mars mission will require an anti-resorptive therapy and 2) the risk for fracture during long-term health cannot be defined by the DXA clinical test alone.

Sibonga, Jean↗
NASA NTRS1974

Martian and lunar science with remotely-controlled long-range surface vehicles

Science objectives are outlined for long surface traverse missions on Mars and the moon, with remotely-controlled roving vehicles. Series of candidate rover science payloads are proposed, varying in purpose, development needed, cost, and weight (35 to almost 300 kg). A high degree of internal control will be needed on the Mars rover, including the ability to carry out complex science sequences. Decision-making by humans in the Mars mission includes supervisory control of rover operations and selection of features and samples of geological and biological interest. For the lunar mission, less control on the rover and more on earth is appropriate. Operational problem areas for Mars include control, communications, data storage, night operations, and the mission operations system. For the moon, science data storage on the rover would be unnecessary and control much simpler.

Jaffe, L. D.↗
NASA NTRS1989

A strategy for Mars: The case for Mars III - Keynote address

Plans for defining a Mars mission and developing the technologies needed for a Mars mission are discussed. The information about Mars obtained from the Viking mission is reviewed. The establishment of a lunar base and the role of such a base in a manned mission to Mars are examined. The problems of a long-term mission in microgravity, the possible development of artificial gravity, the Mars Sample Return mission, and various scenarios for a manned mission to Mars are considered.

Fletcher, James C.↗