Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIXING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Disentangling the gap between pure and mixed-gas performance of thin film composite membranes through improved cell design and testing methods

Testing thin film composite (TFC) membrane coupons at low stage-cuts (≤5%) in a sweep-gas permeation system is a common practice to obtain mixed-gas separation properties for benchmarking performance and making scale-up decisions. However, even under these idealized conditions, mixed-gas permeance and selectivity can be more than 30% lower than their pure-gas values, partially due to concentration polarization, an effect that typically intensifies with increased membrane permeance. This study investigates the effect of cell design on mixed-gas testing using PolyActive TM TFC membranes with pure-gas CO 2 permeance of 1700 – 3100 gas permeance unit (GPU), covering the permeance range of most state-of-the-art CO 2 /N 2 separation membranes. Here, we designed and 3D-printed a counter-current permeation cell with enhanced feed and sweep flow efficiency, resulting in a 33 – 41% increase in mixed-gas CO 2 permeance compared to traditional permeation cells. Furthermore, we compared sweep-gas and vacuum permeation methods using traditional permeation cells, revealing that the latter delivers 41% higher mixed-gas CO 2 permeance, because vacuuming effectively minimizes the downstream concentration polarization. These findings highlight the importance of cell design and permeation apparatus selection in lab-scale mixed-gas testing, with strong implications for module design and process optimization at the industrial scale.

mixed gas performance↗

A buoyancy–shear–drag-based turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing

A phenomenological turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing is developed using a general buoyancy–shear–drag model. Analytic solutions to the simplified model equations corresponding to each instability are derived separately, which are then used to calibrate the model coefficients to predict specific values of the mixing layer growth parameters and exponents. The buoyancy-shear–drag equations for the bubble and spike mixing layer widths are then solved numerically, and a turbulent diffusivity (or viscosity) is constructed dimensionally as the product of the mixing layer width, h, and its time-derivative, dh/dt. Surrogate turbulent fields are then constructed by multiplying a presumed, approximate self-similar spatial profile by appropriate functions of h and dh/dt. Using several simplifying approximations, the turbulent diffusion equations satisfied by the mean mass fraction and mean shear velocity are solved analytically in a reference frame moving with the mean advection velocity, and it is shown that the mean fields evolve in space and time as expected. The explicit modeling and solution of turbulent transport equations (e.g., for the turbulent kinetic energy and its dissipation rate or a lengthscale) are not required. By using separate equations for the bubble and spike evolution, the model naturally captures the asymmetry induced by an increasing density contrast between the heavy and light fluids. The model also includes molecular dissipation and diffusion, and therefore, can describe transition to fully-developed turbulence if the initial turbulent diffusivity/viscosity is much smaller than the molecular diffusivity/viscosity. This model is applied to constant-acceleration Rayleigh–Taylor, impulsively reshocked Richtmyer–Meshkov, and variable-density Kelvin–Helmholtz mixing layers to demonstrate its utility. It is shown that the numerical solutions of the model calibrated using specific values of the instability growth parameters and exponents: (1) produces mixing layer widths in agreement with the expected self-similar growth power laws; (2) gives spatiotemporal profiles of turbulent fields that are expected and consistent with previous results; (3) predicts the expected power-law growths and decays of the spatially-integrated turbulent fields, and; (4) gives spatiotemporal profiles of the mean fields that are expected and consistent with previous results. This relatively simple model can be implemented numerically, and is expected to be useful for fundamental as well as astrophysical and inertial confinement fusion applications.

42 ENGINEERING↗

The Chemical and Electronic Properties of Stability-Enhanced, Mixed Ir-TiO x Oxygen Evolution Reaction Catalysts

Iridium has emerged as the leading catalyst material for the anodic oxygen evolution reaction (OER) in acidic media. Often, iridium is mixed with more stable materials such as titanium. For these materials, the electronic structure of titanium plays a crucial role since with varying degrees of oxidation titanium transforms to semiconducting or even insulating phases. Yet, the electronic properties of mixed Ir-TiO x catalysts have never been systematically studied. In this study, we correlate the catalytic performance of mixed Ir-TiO x -based OER catalysts with the electronic structure of the surface layers. For this, a thin film material library with a 20-70 at. % Ir (Ir/[Ir + Ti]) compositional gradient was prepared. We used inductively coupled plasma mass spectrometry to test the OER activity and stability of the set of mixed Ir-TiO x catalyst candidate materials. Complementary, Ti L 2,3 - and O K-edge X-ray absorption spectroscopy and depth-dependent X-ray photoelectron spectroscopy measurements were performed to correlate the catalytic performance with the composition and electronic property profiles of these mixed Ir-TiO x OER anode catalysts. The spectroscopic analysis reveals that titanium is present as an intermixed matrix of semiconductive but stable TiO 2 , conductive but less stable titanium-suboxides (TiO x ), and highly conductive but highly unstable metallic Ti(0). The extent of the titanium oxidation strongly depends on the titanium content, with a lower degree of oxidation observed for lower titanium (and thus higher iridium) contents. For an iridium loading of 70 at. %, the respective mixed Ir-TiO x catalyst showed a similar OER activity to that of the pure metallic iridium (1.74 vs 1.59 VRHE, respectively) but with a 71% lower iridium dissolution rate relative to the pure metallic iridium. This demonstrates the stabilization effect of titanium addition while maintaining high OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitivity of Global Ocean Deoxygenation to Vertical and Isopycnal Mixing in an Ocean Biogeochemistry Model

Large-scale loss of oxygen under global warming is termed “ocean deoxygenation” and is caused by the imbalance between physical supply and biological consumption of oxygen in the ocean interior. Significant progress has been made in the theoretical understanding of ocean deoxygenation; however, many questions remain unresolved. The oxygen change in the tropical thermocline is poorly understood, with diverging projections among different models. Physical oxygen supply is controlled by a suite of processes that transport oxygen-rich surface waters into the interior ocean, which is expected to weaken due to increasing stratification under global warming. Using a numerical model and a series of sensitivity experiments, the role of ocean mixing is examined in terms of effects on the mean state and the response to a transient warming. Both vertical and horizontal (isopycnal) mixing coefficients are systematically varied over a wide range, and the resulting oxygen distributions in equilibrated and transient simulations are examined. The spatial patterns of oxygen loss are sensitive to both vertical and isopycnal mixing, and the sign of tropical oxygen trend under climate warming can reverse depending on the choice of mixing parameters. An elevated level of isopycnal mixing disrupts the vertical advective-diffusive balance of the tropical thermocline, increasing the mean state oxygen as well as the magnitude of the transient oxygen decline. These results provide first-order explanations for the diverging behaviors of simulated tropical oxygen with respect to ocean mixing parameters.

58 GEOSCIENCES↗

Temperature dependence of ion-beam mixing in crystalline and amorphous germanium isotope multilayer structures

Self-atom mixing induced by 310 keV gallium (Ga) ion implantation in crystalline and preamorphized germanium (Ge) at temperatures between 164 K and 623 K and a dose of 1 × 10{sup 15} cm{sup −2} is investigated using isotopic multilayer structures of alternating {sup 70}Ge and {sup nat}Ge layers grown by molecular beam epitaxy. The distribution of the implanted Ga atoms and the ion-beam induced depth-dependent self-atom mixing was determined by means of secondary ion mass spectrometry. Three different temperature regimes of self-atom mixing, i.e., low-, intermediate-, and high-temperature regimes are observed. At temperatures up to 423 K, the mixing is independent of the initial structure, whereas at 523 K, the intermixing of the preamorphized Ge structure is about twice as high as that of crystalline Ge. At 623 K, the intermixing of the initially amorphous Ge structure is strongly reduced and approaches the mixing of the crystalline material. The temperature dependence of ion-beam mixing is described by competitive amorphization and recrystallization processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical estimate of phase mixing time of longitudinal Akhiezer-Polovin waves

Phase mixing of a longitudinal Akhiezer-Polovin wave subjected to a small amplitude longitudinal perturbation and its eventual breaking is studied analytically. It is well known that longitudinal Akhiezer-Polovin wave subjected to arbitrarily small longitudinal perturbation breaks via the process of phase mixing at an amplitude well below its limiting amplitude [Verma et al., Phys. Rev. Lett. 108, 125005 (2012)]. We analytically show that the phase mixing time (breaking time, ω{sub p}τ{sub mix}) scales with β (phase velocity) and u{sub m}(maximum fluid velocity) as ω{sub p}τ{sub mix}∼(2πβ)/(3δ) [1/u{sub m}{sup 2}−1/4], where δ is the amplitude of velocity perturbation and ω{sub p} is the non-relativistic plasma frequency. This analytical dependence of phase mixing time on β, u{sub m}, and δ is further verified using numerical simulations based on Dawson sheet model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mixing transition in a shocked variable-density flow

We measure two-dimensional velocity and density fluctuations in a shock-driven heavy gas curtain for three different incident Mach numbers (M = 1.21, 1.36, and 1.50) and a fixed initial perturbation. We study the time evolution of the velocity and density fields and observe two different mixing transitions in this unsteady flow. The first transition is caused by small-scale mixing in vortex cores, while the second transition is related to increased homogenization across the mixing layer and a drive towards isotropy. By measuring the anisotropy of the velocity fluctuations and the evolution of the turbulent kinetic energy, we are able to assess the anisotropy of the flow. For the first time in Richtmyer-Meshkov (RM) flows, we measure and compare turbulent length scales derived from both the density and velocity field measurements, and we find ratios of Liepmann-Taylor to inner-viscous scales (λ L /λ v ) that are inconsistent with those found using Reynolds number scaling based on circulation, Re Γ , or based on turbulent kinetic energy, Re K . At late times, Re K better reflects the decay of the mixing field than Reynolds numbers that are based upon mixing width or circulation. We also estimate the time evolution of dissipation and Kolmogorov scales for the first time in RM flows. When we estimate the Taylor microscale (λ T ) for our experiments using both density and velocity, the density microscale agrees well with with the relationship λ T = √10δRe- 1/2 where Re = ReK and δ is the mixing layer width, but the velocity-based Taylor microscale follows a new scaling of λ T = 10δRe -1/2 .

42 ENGINEERING↗

Reynolds number effects on mixing due to topological chaos

Topological chaos has emerged as a powerful tool to investigate fluid mixing. While this theory can guarantee a lower bound on the stretching rate of certain material lines, it does not indicate what fraction of the fluid actually participates in this minimally mandated mixing. Indeed, the area in which effective mixing takes place depends on physical parameters such as the Reynolds number. To help clarify this dependency, we numerically simulate the effects of a batch stirring device on a 2D incompressible Newtonian fluid in the laminar regime. In particular, we calculate the finite time Lyapunov exponent (FTLE) field for three different stirring protocols, one topologically complex (pseudo-Anosov) and two simple (finite-order), over a range of viscosities. After extracting appropriate measures indicative of both the amount of mixing and the area of effective mixing from the FTLE field, we see a clearly defined Reynolds number range in which the relative efficacy of the pseudo-Anosov protocol over the finite-order protocols justifies the application of topological chaos. More unexpectedly, we see that while the measures of effective mixing area increase with increasing Reynolds number for the finite-order protocols, they actually exhibit non-monotonic behavior for the pseudo-Anosov protocol.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of B{sub 2}O{sub 3} flux on growth NLBCO superconductor by solid state reaction and wet-mixing methods

The synthesis of B{sub 2}O{sub 3} flux substituted NLBCO superconductor NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂} has been done using solid state reaction and wet-mixing methods in order to obtain homogeneous crystals and single phase. From DTA/TGA characteritations showed the synthesis process by wet-mixing requires a lower temperature than the solid state reaction in growing the superconductor NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂}. Therefore, in this research NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂} sample calcinated at 650°C for wet-mixing method and 820°C for solid state reaction methods. The all samples was sintered at 950°C for ten hours. Crystallinity of the sample was confirmed using X-ray techniques and generally obtained sharp peaks that indicates the sample already well crystallized. Search match analyses for diffraction data gave weight fractions of impurity phase of the solid state reaction method higher than wet-mixing method. In this research showed decreasing the price of the lattice parameter about 1% with the addition of B{sub 2}O{sub 3} flux for the both synthesis process and 2% of wet mixing process for all samples. Characterization using scanning electron microscopy (SEM) showed the distribution of crystal zise for wet-mixing method more homogeneous than solid state reaction method, with he grain size of samples is around 150–250 nm. The results of vibrating sample magnetometer (VSM) showed the paramagnetic properties for all samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Autoionization dynamics of ( 2 P 1/2 ) ns/d states in krypton probed by noncollinear wave mixing with attosecond extreme ultraviolet and few-cycle near infrared pulses

The autoionization dynamics of the ( 2 P 1/2 )ns/d Rydberg states in krypton are investigated using spatially isolated wave-mixing signals generated with a short train of subfemtosecond extreme ultraviolet (XUV) pulses and noncollinear, few-cycle near infrared pulses. Despite ubiquitous quantum beat oscillations from XUV-induced coherences within the excited-state manifold, these wave-mixing spectra allow for the simultaneous evaluation of autoionization lifetimes from a series of Rydberg states above the first ionization potential. Experimentally measured lifetimes of 22 ± 8 fs, 33 ± 6 fs, and 49 ± 6 fs for the wave-mixing signals emitting from the ( 2 P 1/2 )6d/8s, ( 2 P 1/2 )7d/9s, and ( 2 P 1/2 )8d/10s resonances compare favorably with lifetimes for the ( 2 P 1/2 )6d, 7d, and 8d Rydberg states determined from spectral linewidths. Analysis of the quantum beats reveals that the enhancement of wave-mixing pathways that couple the ( 2 P 1/2 )nd states to themselves leads to individual reporter state-dependent decays in the wave-mixing signals. Lastly, the results demonstrate the promise of wave-mixing spectroscopies with subfemtosecond XUV pulses to provide valuable insights into processes governed by electronic dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗

THE MASS MIXING LENGTH IN CONVECTIVE STELLAR ENVELOPES

The scale length over which convection mixes mass in a star can be calculated as the inverse of the vertical derivative of the unidirectional (up or down) mass flux. This is related to the mixing length in the mixing length theory of stellar convection. We give the ratio of mass mixing length to pressure scale height for a grid of three-dimensional surface convection simulations, covering from 4300 K to 6900 K on the main sequence, and up to giants at log g = 2.2, all for solar composition. These simulations also confirm what is already known from solar simulations that convection does not proceed by discrete convective elements, but rather as a continuous, slow, smooth, warm upflow and turbulent, entropy deficient, fast down drafts. This convective topology also results in mixing on a scale comparable to the classic mixing length formulation, and is simply a consequence of mass conservation on flows in a stratified atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

EFFECTS OF ROTATIONALLY INDUCED MIXING IN COMPACT BINARY SYSTEMS WITH LOW-MASS SECONDARIES AND IN SINGLE SOLAR-TYPE STARS

Many population synthesis and stellar evolution studies have addressed the evolution of close binary systems in which the primary is a compact remnant and the secondary is filling its Roche lobe, thus triggering mass transfer. Although tidal locking is expected in such systems, most studies have neglected the rotationally induced mixing that may occur. Here we study the possible effects of mixing in mass-losing stars for a range of secondary star masses and metallicities. We find that tidal locking can induce rotational mixing prior to contact and thus affect the evolution of the secondary star if the effects of the Spruit-Tayler dynamo are included both for angular momentum and chemical transport. Once contact is made, the effect of mass transfer tends to be more rapid than the evolutionary timescale, so the effects of mixing are no longer directly important, but the mass-transfer strips matter to inner layers that may have been affected by the mixing. These effects are enhanced for secondaries of 1-1.2 M{sub Sun} and for lower metallicities. We discuss the possible implications for the paucity of carbon in the secondaries of the cataclysmic variable SS Cyg and the black hole candidate XTE J1118+480 and for the progenitor evolution of Type Ia supernovae. We also address the issue of the origin of blue straggler stars in globular and open clusters. We find that for models that include rotation consistent with that observed for some blue straggler stars, evolution is chemically homogeneous. This leads to tracks in the H-R diagram that are brighter and bluer than the non-rotating main-sequence turn-off point. Rotational mixing could thus be one of the factors that contribute to the formation of blue stragglers.

79 ASTRONOMY AND ASTROPHYSICS↗

Calibrating the updated overshoot mixing model on eclipsing binary stars: HY Vir, YZ Cas, χ{sup 2} Hya, and VV Crv

Detached eclipsing binary stars with convective cores provide a good tool to investigate convective core overshoot. It has been performed on some binary stars to restrict the classical overshoot model which simply extends the boundary of the fully mixed region. However, the classical overshoot model is physically unreasonable and inconsistent with helioseismic investigations. An updated model of overshoot mixing was established recently. There is a key parameter in the model. In this paper, we use observations of four eclipsing binary stars, i.e., HY Vir, YZ Cas, χ{sup 2} Hya, and VV Crv, to investigate a suitable value for the parameter. It is found that the value suggested by calibrations on eclipsing binary stars is the same as the value recommended by other methods. In addition, we have studied the effects of the updated overshoot model on the stellar structure. The diffusion coefficient of convective/overshoot mixing is very high in the convection zone, then quickly decreases near the convective boundary, and exponentially decreases in the overshoot region. The low value of the diffusion coefficient in the overshoot region leads to weak mixing and a partially mixed overshoot region. Semi-convection, which appears in the standard stellar models of low-mass stars with convective cores, is removed by partial overshoot mixing.

79 ASTRONOMY AND ASTROPHYSICS↗

THERMOHALINE MIXING: DOES IT REALLY GOVERN THE ATMOSPHERIC CHEMICAL COMPOSITION OF LOW-MASS RED GIANTS?

First results of our three-dimensional numerical simulations of thermohaline convection driven by {sup 3}He burning in a low-mass red giant branch (RGB) star at the bump luminosity are presented. They confirm our previous conclusion that this convection has a mixing rate that is a factor of 50 lower than the observationally constrained rate of RGB extra-mixing. It is also shown that the large-scale instabilities of the salt-fingering mean field (those of the Boussinesq and advection-diffusion equations averaged over length and timescales of many salt fingers), which have been observed to increase the rate of oceanic thermohaline mixing up to one order of magnitude, do not enhance the RGB thermohaline mixing. We speculate on possible alternative solutions of the problem of RGB extra-mixing, among which the most promising one that is related to thermohaline mixing takes advantage of the shifting of the salt-finger spectrum toward larger diameters by toroidal magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Future grid mix impacts on whole-building life cycle assessment

Building construction and operation are a significant contribution to global greenhouse gas emissions, so understanding and mitigating emissions is crucial for reliable and realistic emissions accounting. Whole-building Life Cycle Assessment (WBLCA) is an emissions accounting method that considers lifetime environmental impacts of a building during its construction, operation, and eventual end-of-life. When performing WBLCAs, emission calculations from the building's operation over the entire building lifespan are typically based on today's energy grid mixes. This method does not consider changes or advancements in the clean energy proportion within the grid mix and can over or under-inflate results, skewing the ratio of embodied vs. operational environmental impacts. While a variety of prediction tools estimate what future grid emissions might be, predictions can vary widely. To predict the clean energy ratio within future grid mixes and the potential impact these changes might have on WBLCA, annual data from several existing U.S. grid models was averaged and probabilistic modeling was used to extend the usable projections of shorter forecasts. Results show that clean energy sources will likely continue to increase over time, although the rate of growth varies by model. On average, by 2085, the clean energy penetration of the grid is projected to reach ~81% and renewable energy is projected to reach ~71%, although no widespread consensus is reached. To understand how the future grid mix impacts lifetime building emissions within a WBLCA context, the team analyzed two 2021 IECC-compliant all-electric residential buildings: one built from traditional materials and construction processes and the other built with carbon sequestering materials and modular assembly, with a portion of energy generated on site. The results indicate that a moderate estimate of future electricity grid mixes shows a reduction of yearly operational emissions for traditional residential buildings of 55% between 2025 and 2085, and a corresponding reduction of 48% of total emissions over a 60 year building lifespan. This study offers a nuanced approach to account for the variability of future grid mix models and provides an average trend-line based on a robust collection of scenarios.

Life Cycle Assessment (LCA)↗

Indirect CP violation and implications for D{sup 0}-D{sup 0} and B{sub s}-B{sub s} mixing

The two kinds of indirect CP violation in neutral meson systems are related, in the absence of new weak phases in decay. The result is a model-independent expression relating CP violation in mixing, CP violation in the interference of decays with and without mixing, and the meson mass and width differences. It relates the semileptonic and time-dependent CP asymmetries, and pairs of time-dependent CP asymmetries in D{sup 0} decays to non-CP eigenstates. CP violation in the interference of decays with and without mixing is related to the mixing parameters of relevance to model building: the off-diagonal mixing matrix elements |M{sub 12}|, |{gamma}{sub 12}|, and {phi}{sub 12}{identical_to}arg(M{sub 12}/{gamma}{sub 12}). Incorporating this relation into a fit to the D{sup 0}-D{sup 0} mixing data implies a level of sensitivity to |{phi}{sub 12}{sup D}| of 0.10 (rad) at 1{sigma}. The formalism is extended to include new weak phases in decay, and in {gamma}{sub 12}. The phases are highly constrained by direct CP violation measurements. Consequently, the bounds on |{phi}{sub 12}{sup D}| are not significantly altered, and the effects of new weak phases in decay could be difficult to observe at a high luminosity flavor factory (D{sup 0}) or at the LHC (B{sub s}) via violations of the above relations, unlike in direct CP violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Leptonic mixing, family symmetries, and neutrino phenomenology

Tribimaximal leptonic mixing is a mass-independent mixing scheme consistent with the present solar and atmospheric neutrino data. By conveniently decomposing the effective neutrino mass matrix associated to it, we derive generic predictions in terms of the parameters governing the neutrino masses. We extend this phenomenological analysis to other mass-independent mixing schemes which are related to the tribimaximal form by a unitary transformation. We classify models that produce tribimaximal leptonic mixing through the group structure of their family symmetries in order to point out that there is often a direct connection between the group structure and the phenomenological analysis. The type of seesaw mechanism responsible for neutrino masses plays a role here, as it restricts the choices of family representations and affects the viability of leptogenesis. We also present a recipe to generalize a given tribimaximal model to an associated model with a different mass-independent mixing scheme, which preserves the connection between the group structure and phenomenology as in the original model. This procedure is explicitly illustrated by constructing toy models with the transpose tribimaximal, bimaximal, golden ratio, and hexagonal leptonic mixing patterns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Applying Hanford Tank Mixing Data to Define Pulse Jet Mixer Operation

Pulse jet mixed (PJM) process vessels are being developed for storing, blending, and chemical processing of nuclear waste slurries at the Waste Treatment and Immobilization Plant (WTP) to be built at Hanford, Washington. These waste slurries exhibit variable process feed characteristics including Newtonian to non-Newtonian rheologies over a range of solids loadings. Waste feed to the WTP from the Hanford Tank Farms will be accomplished via the Waste Feed Delivery (WFD) system which includes million-gallon underground storage double-shell tanks (DSTs) with dual-opposed jet mixer pumps. Experience using WFD type jet mixer pumps to mobilize actual Hanford waste in DSTs may be used to establish design threshold criteria of interest to pulse jet mixed process vessel operation. This paper describes a method to evaluate the pulse jet mixed vessel capability to process waste based on information obtained during mobilizing and suspending waste by the WFD system jet mixer pumps in a DST. Calculations of jet velocity and wall shear stress in a specific pulse jet mixed process vessel were performed using a commercial computational fluid dynamics (CFD) code. The CFD-modelled process vessel consists of a 4.9-m- (16-ft-) diameter tank with a 2:1 semi-elliptical head, a single, 10-cm (4-in.) downward facing 60-degree conical nozzle, and a 0.61-m (24-in.) inside diameter PJM. The PJM is located at 70% of the vessel radius with the nozzle stand-off-distance 14 cm (6 in.) above the vessel head. The CFD modeled fluid velocity and wall shear stress can be used to estimate vessel waste-processing performance by comparison to available actual WFD system process data. Test data from the operation of jet mixer pumps in the 23-m (75-ft) diameter DSTs have demonstrated mobilization, solid particles in a sediment matrix were moved from their initial location, and suspension, mobilized solid particles were moved to a higher elevation in the vessel than their initial location, of waste solids. Jet mixer pumps were used in Hanford waste tank 241-AZ-101, and at least 95% of the 0.46-m (18-in.) deep sediment, with a shear strength of 1,500 to 4,200 Pa, was mobilized. Solids with a median particle size of 43 μm, 90th percentile of 94μm, were suspended in tank 241-AZ-101 to at least 5.5 m (216 in.) above the vessel bottom. Analytical calculations for this jet mixer pump test were used to estimate the velocities and wall shear stress that mobilized and suspended the waste. These velocities and wall shear stresses provide design threshold criteria which are metrics for system performance that can be evaluated via testing. If the fluid motion in a specific pulse jet mixed process vessel meets or exceeds the fluid motion of the demonstrated performance in the WFD system, confidence is provided that that vessel will similarly mobilize and suspend those solids if they were within the WTP. The single PJM CFD-calculated jet velocity and wall shear stress compare favorably with the design threshold criterion estimated for the tank 241-AZ-101 process data. Therefore, for both mobilization and suspension, the performance data evaluated from the WFD system testing increases confidence that the performance of the pulse jet mixed process vessels will be sufficient to process that waste even if that waste is not fully characterized.

mixing' slurry↗