Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Quantitative assessment of alkali-reactive aggregate mineral content through XRD using polished sections as a supplementary tool to RILEM AAR-1 (petrographic method)

The mineral content of 5 aggregate samples from 4 different countries, including reactive and non-reactive aggregate types, was assessed quantitatively by X-ray diffraction (XRD) using polished sections. Additionally, electron probe microanalyzer (EPMA) mapping and cathodoluminescence (CL) were used to characterize the opal-CT identified in one of the aggregate samples. Critical review of results from polished sections against traditionally powdered specimen has demonstrated that for fine-grained rocks without preferred orientation the assessment of mineral content by XRD using polished sections may represent an advantage over traditional powder specimens. Comparison of data on mineral content and silica speciation with expansion data from PARTNER project confirmed that the presence of opal-CT plays an important role in the reactivity of one of the studied aggregates. Used as a complementary tool to RILEM AAR-1, the methodology suggested in this paper has the potential to improve the strength of the petrographic method.

36 MATERIALS SCIENCE↗

Micro- to nano-scale areal heterogeneity in pore structure and mineral compositions of a sub-decimeter-sized Eagle Ford Shale

Mineral and organic matter compositions & pore structures of fine-grained shale influence reservoir properties. To improve the understanding of spatial heterogeneity in core-sized samples, methods of microscale X-ray fluorescence (μXRF) mapping, (ultra-) small-angle x-ray scattering [(U)SAXS] and wide-angle X-ray scattering (WAXS) have been used to determine elemental, pore-structure variations at scales up to ~10 cm on two samples prepared at circular and rectangular orientations from a piece of Eagle Ford Shale outcrop in South Texas, USA. In addition, thin section petrography and field emission-scanning electron microscopy observations, X-ray diffraction (XRD), total organic carbon, and pyrolysis were utilized to investigate the potential spatial heterogeneity of pore types, mineral and organic matter compositions for cm-sized samples at both orientations. Overall, the siliceous-carbonate mineral contents in these two samples (8 cm×8 cm×0.08 cm and 5 cm × 8 cm × 0.08 cm, in terms of width×length×thickness) of carbonate-rich Eagle Ford Shale vary between laminations at mm scales. For the circular sample, porosity and specific surface area (SSA) variations range from 0.82 to 3.04% and 1.51 to 14.1 m 2 /g, respectively. For the rectangular sample, values for porosity and SSA vary from 0.93 to 2.50% and 3.95 to 10.8 m 2 /g. By analyzing six selected sub-samples on each of two samples with (U)SAXS and XRD techniques, nm-sized pores are mainly interparticle ones in the higher calcite regions, where the porosity is also relatively lower, while the lower calcite regions consist of both interparticle and intraparticle pore types with higher porosity. Lastly, the μXRF and (U)SAXS mappings are combined to generate porosity distribution maps to provide more insights about sample heterogeneity related to the laminations and fractures at our observational scales.

58 GEOSCIENCES↗

Exposure to cadmium and persistent organochlorine pollutants and its association with bone mineral density and markers of bone metabolism on postmenopausal women

Environmental contaminants such as cadmium and persistent organochlorine pollutants have been proposed as risk factors of osteoporosis, and women may be at an increased risk. To assess associations between exposure to cadmium and two different POPs (2,2',4,4',5,5'-hexachlorobiphenyl CB-153, 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethylene p,p'-DDE), on one hand, and bone effects, on the other, in a population-based study among postmenopausal (60-70 years) Swedish women with biobanked blood samples. The study included 908 women and was designed to have a large contrast of bone mineral densities, measured with a single photon absorptiometry technique in the non-dominant forearm. Biochemical markers related to bone metabolism were analyzed in serum. Exposure assessment was based on cadmium concentrations in erythrocytes and serum concentrations of CB-153 and p,p'-DDE. Cadmium was negatively associated with bone mineral density and parathyroid hormone, positively with the marker of bone resorption. However, this association disappeared after adjustment for smoking. The major DDT metabolite (p,p'-DDE) was positively associated with bone mineral density, an association which remained after adjustment for confounders, but the effect was weak. There was no evidence that the estrogenic congener (CB-153) was associated with any of the bone markers. In conclusion, no convincing associations were observed between cadmium and POPs, on one hand, and bone metabolism markers and BMD, on the other.

60 APPLIED LIFE SCIENCES↗

CO 2 mineral trapping in fractured basalt

Fractures in basalt can provide substantial surface area for reactions, and limited mass transfer in fractures can allow accumulation of cations to form carbonate minerals in geologic carbon sequestration. In this study, flood basalt and serpentinized basalt with engineered fractures were reacted in water equilibrated with 10 MPa CO 2 at 100 °C or 150 °C for up to 40 weeks. Carbonation in basalt fractures was observed as early as 6 weeks, with Mg- and Ca-bearing siderite formed in both basalts reacted at 100 °C and Mg-Fe-Ca carbonate minerals formed in the flood basalt reacted at 150 °C. X-ray μCT segmentation revealed that precipitates filled 5.4% and 15% (by volume) of the flood basalt fracture after 40 weeks of reaction at 100 °C and 150 °C, respectively. Zones of elevated carbonate abundance did not completely seal the fracture. Limited siderite clusters (<1% volume fraction) were found in localized areas in the serpentinized basalt fracture. A 1-dimensional reactive transport model developed in CrunchTope examined how geochemical gradients drive silicate mineral dissolution and carbonate precipitation in the fracture. The model predicts that siderite will form as early as 1 day after the addition of CO 2 . In conclusion, the predicted location of maximum siderite abundance is consistent with experimental observations, and the predicted total carbonate volumes are comparable to estimates derived from CT segmentation.

54 ENVIRONMENTAL SCIENCES↗

Transformation of dense AgI into a silver-rich framework iodide using thiophenol as mineralizer

A new three-dimensional framework iodide, (DabcoH){sub 2}[(Dabco){sub 2}Ag{sub 14}I{sub 16}] (1), was solvothermal synthesized by transformation of dense AgI using p-methylthiophenol as mineralizer, and characterized by elemental analysis, single-crystal and powder X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry analysis, UV–vis diffuse reflectance spectroscopy and fluorescence spectroscopy. Compound 1 crystallizes in the trigonal space group R-3c, a=13.4452(2) Å, c=63.725(2) Å, V=9976.5(4) Å{sup 3}, Z=6. It features a 3D silver-rich [(Dabco){sub 2}Ag{sub 14}I{sub 16}]{sup 2−} anionic framework built up from corner-sharing of hybrid [(Dabco){sub 2}Ag{sub 14}I{sub 19}]{sup 5−} clusters, with protonated DabcoH{sup +} as counterions residing in the channels. UV–vis reflectance spectroscopy reveals the band gap of 1 is 3.3 eV. Compound 1 exhibits a strong photoluminescent emission band at 567 nm upon excitation at 489 nm. - Graphical abstract: A new 3-D iodoargentate was synthesized by transformation of dense AgI in I{sup −}-deficient system using thiophenol as mineralizer. - Highlights: • We have developed a new method to synthesize iodide using thiophenol as mineralizer. • A new 3D iodide, (DabcoH){sub 2}[(Dabco){sub 2}Ag{sub 14}I{sub 16}], was synthesized by transformation of dense AgI under solvothermal condition. • The compound features a 3D Ag–I framework with highest Ag/I ratio. • Compound 1 is a semiconductor with the band gap of 3.3 eV. • Compound 1 exhibits a strong photoluminescent emission band at 567 nm upon excitation at 489 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of hydrothermally synthesized Zn{sub 2}SnO{sub 4} nanoparticles using Na{sub 2}CO{sub 3} as a novel mineralizer

Zn{sub 2}SnO{sub 4} nanoparticles with a band gap of 2.96-3.36 eV were synthesized via a simple hydrothermal method using Na{sub 2}CO{sub 3} as a new mineralizer. The effects of the concentration of Na{sub 2}CO{sub 3} on the formation, morphology and optical properties of the Zn{sub 2}SnO{sub 4} nanoparticles are discussed. Also, the reaction parameters, such as the reaction temperature and reaction time, were optimized. The as-synthesized Zn{sub 2}SnO{sub 4} nanoparticles exhibit no impurity phases such as SnO{sub 2} and ZnO throughout the entire process, as confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies. Also, the formation of impurity free Zn{sub 2}SnO{sub 4} nanoparticles in the presence of Na{sub 2}CO{sub 3} is explained by a unique hydrothermal reaction sequence. The average particle size of the highly crystalline Zn{sub 2}SnO{sub 4} nanoparticles was controllable by adjusting the mineralizer concentration, which enabled the facile tuning of the bandgap. From the photoluminescence (PL) study, two emission bands could be found after peak analysis, which are probably due to the presence of oxygen or cation vacancies generated during the hydrothermal process. These bands were shifted to lower frequencies as the concentration of the Na{sub 2}CO{sub 3} mineralizer increased.

36 MATERIALS SCIENCE↗

Synthesis of PHI-type zeolite harmotome using barium as an inorganic structure-directing agent inspired from natural mineral compositions

Zeolites are nanoporous aluminosilicates widely used as commercial adsorbents, heterogeneous catalysts, and ion-exchange materials due to their unique porosity, acidity, and thermal stability. The vast majority of synthetically-realized zeolite structures are prepared under hydrothermal conditions in alkaline media, and often in the presence of an organic structure-directing agent that facilitates the crystallization of diverse porous networks. Due to economic and environmental disadvantages of organic-based syntheses, it is often desirable to produce zeolites in organic-free media using alkali metal ions as the most commonly employed inorganic structure-directing agents (ISDAs). Here, in this study, we were inspired by the elemental compositions of natural zeolite minerals to examine the use of an alkaline earth metal ion as the ISDA to prepare zeolites with the PHI framework type. Two natural minerals exhibiting this crystal structure are phillipsite and harmotome. Both structures contain sodium and potassium as extra-framework cations, but only harmotome contains barium cations. Here we examined how the combination of alkali and alkaline earth ISDAs promote the formation of PHI-type zeolites. Our findings reveal that each isostructure is prepared under different synthesis conditions where simply adding barium to a growth mixture does not always lead to harmotome formation. Harmotome is formed in more dilute and alkaline growth media; however, time-resolved analyses of zeolite crystallization reveal that harmotome can be synthesized at low temperatures (ca. 65 °C) with rates that are 5-times faster than syntheses of phillipsite. This seemingly indicates that barium reduces the energetic barrier for PHI-type zeolite nucleation in ways that are not fully understood. Moreover, harmotome crystals exhibit an average particle size of ca. 60 nm, which is nearly 40-fold smaller than phillipsite crystals prepared under similar conditions. Collectively, these findings identify routes to control crystallization of PHI-type zeolites and may provide a broader strategy for using the composition of natural zeolite minerals to optimize the preparation of synthetic analogues.

36 MATERIALS SCIENCE↗

In situ determination of crystal structure and chemistry of minerals at Earth's deep lower mantle conditions

Recent advances in experimental techniques and data processing allow in situ determination of mineral crystal structure and chemistry up to Mbar pressures in a laser-heated diamond anvil cell (DAC), providing the fundamental information of the mineralogical constitution of our Earth's interior. This work highlights several recent breakthroughs in the field of high-pressure mineral crystallography, including the stability of bridgmanite, the single-crystal structure studies of post-perovskite and H-phase as well as the identification of hydrous minerals and iron oxides in the deep lower mantle. The future development of high-pressure crystallography is also discussed.

58 GEOSCIENCES↗

Solution and Interface Structure and Dynamics in Geochemistry: Gateway to Link Elementary Processes to Mineral Nucleation and Growth

Our understanding of the process of mineral nucleation is starting to evolve from the solely thermodynamical aspects in classical nucleation theory toward a mechanistic study of reactions influenced by solvation structures of ions and their dynamics. A knowledge of how these atomic and molecular interactions respond to changing solution composition and/or the nature of an interface will form a fundamental foundation to understand rate-limiting reactions and processes for nucleation and growth. Here, we review recent advances from multidisciplinary experimental and computational approaches of the structure and dynamics of aqueous solutions and mineral–liquid interfaces that will influence rates of nucleation (and growth behavior) both homogeneously in aqueous solutions and heterogeneously at mineral–liquid interfaces. Furthermore, these processes include structure (and extent) of solute clustering, solvent degrees of freedom, and the presence of noninnocent charge-balancing ions, all of which can drive the selectivity and exert control over nucleation mechanisms. Similar controlling reactions can also occur at interfaces with the added complexities of how solute ions interact with and assemble on surface sites and use different mechanisms from bulk solutes, such as lateral solvent exchanges between distinct surface sites. To gain a predictive understanding of nucleation chemistry, we emphasize several key knowledge gaps that will need to be addressed in this field and highlight the importance of combining computations and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Acid–Base Stimulation Sequence on Mineral Stability for Tight/Impermeable Unconventional Carbonate-Rich Rocks: A Delaware Basin Case Study

We report mineral precipitation due to reactions with injected fluids during unconventional fracture stimulation is a well-recognized problem. The goal of this study is to evaluate secondary mineral precipitation and permeability attenuation under chemical injection scenarios specific to the Delaware basin. Whole cylindrical cores (2.54 cm diameter and 2.54 cm height) and ground shale (150–250 μm) from the carbonate-rich Bone Spring Formation, Delaware Basin TX (Leonardian), were reacted at 80 °C and 85 bar using a hydraulic fracturing fluid (HFF) recipe and an injection sequence typical of the Delaware Basin. The reacted shales and solutions were analyzed using a variety of laboratory- and synchrotron-based techniques to characterize both the chemical and spatial distributions of secondary mineral precipitation and identify changes in permeability and mineralogy. This carbonate-rich shale (>84% calcite) rapidly neutralized the acidic HFF. Synchrotron-based X-ray fluorescence mapping coupled with X-ray absorption spectroscopy (both bulk and micro) showed that most of the iron was in an oxidized form prior to exposure to HFF and that almost all iron(II) became fully oxidized after the reaction. Scanning electron microscopy images of the ground shale samples primarily identified iron(oxyhydr)oxide microcrystals on grain surfaces. A few small isolated iron-rich areas also contained sulfur, suggesting that some pyrite was preserved when isolated within a calcite crystal but that most was oxidized. The rapid neutralization of the acid spearhead in these carbonate-rich samples demonstrates that the acid spearhead is useful for initiating fractures in extremely calcite-rich rocks but does little to enhance rock permeability. This suggests that the impact of the acid spearhead is significantly smaller for carbonate-rich shales compared to clay-rich shales, which has broad implications for acidizing in carbonate-rich shale formations and iron transformations within these shales.

58 GEOSCIENCES↗

Dithionite Inhibits Iron(III) (Hydr)oxide Formation during Olivine Dissolution Advancing Simultaneous CO 2 Mineralization and Nickel Recovery

Increasing CO 2 concentration poses significant global challenges, impacting both environmental and human health. As we strive for a carbon-neutral energy technology transition, the demand for critical elements (e.g., nickel and cobalt) continues to increase, while high-grade ores are depleting. Combining CO 2 mineralization with the recovery of critical elements from low-grade ores offers an innovative solution. Olivine, a magnesium-rich ultramafic with trace amounts of critical elements, is a promising mineral; however, its impurities, such as iron (Fe(III)), hinder the dissolution of Ni and Mg from olivine, reducing its carbonation and critical element recovery. Here, to address this challenge, this study examined Ni dissolution from San Carlos olivine at high temperatures and high CO 2 pressure. We found that iron(III) (hydr)oxide layers impeded olivine dissolution; however, with sodium dithionite (Na 2 S 2 O 4 ), a reducing agent, olivine dissolution is significantly improved by preventing iron(III) (hydr)oxide formation. With Na 2 S 2 O 4 , within 24 h, Mg and Ni dissolution from olivine increased 2.85-fold and 2.66-fold, respectively, compared to samples without Na 2 S 2 O 4 . After seven cycles, with solutions replaced every 24 h, 98.9% of the total Mg and 84.6% of the total Ni were recovered. This approach enhances olivine’s CO 2 mineralization and improves the sustainability of critical element supply.

54 ENVIRONMENTAL SCIENCES↗

The Role of Iron-Bearing Minerals in NO 2 to HONO Conversion on Soil Surfaces

Nitrous acid (HONO) accumulates in the nocturnal boundary layer where it is an important source of daytime hydroxyl radicals. Although there is clear evidence for the involvement of heterogeneous reactions of NO2 on surfaces as a source of HONO, mechanisms remain poorly understood. We used coated-wall flow tube measurements of NO2 reactivity on environmentally relevant surfaces [Fe (hydr)oxides, clay minerals, and soil from Arizona and the Saharan Desert] and detailed mineralogical characterization of substrates to show that reduction of NO2 by Fe-bearing minerals in soil can be a more important source of HONO than the putative NO2 hydrolysis mechanism. The magnitude of NO2-to-HONO conversion depends on the amount of Fe2+ present in substrates and soil surface acidity. Studies examining the dependence of HONO flux on substrate pH revealed that HONO is formed at soil pH < 5 from the reaction between NO2 and Fe2+(aq) present in thin films of water coating the surface, whereas in the range of pH 5–8 HONO stems from reaction of NO2 with structural iron or surface complexed Fe2+ followed by protonation of nitrite via surface Fe-OH2+ groups. Reduction of NO2 on ubiquitous Fe-bearing minerals in soil may explain HONO accumulation in the nocturnal boundary layer and the enhanced [HONO]/[NO2] ratios observed during dust storms in urban areas.

Environmental Molecular Sciences Laboratory↗

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗

Interfacial Hydrophilicity Controls Mineral Transformation Outcomes for Enstatite and Amorphous MgSiO 3

Subsurface injection of carbon dioxide (CO 2 ) into mafic-ultramafic rocks for permanent storage via mineralization is being studied to reduce emissions. Here, we investigated the carbonation products of enstatite (MgSiO 3 ) to assess its efficiency in sequestering CO 2 for safe and permanent storage as carbonate minerals. This was accomplished by conducting variable temperature carbonation reactions with samples of differing crystallinities and surface chemistries. Reaction progress was monitored utilizing in situ X-ray diffraction, and the presence of carbonate products was confirmed using additional techniques, such as thermogravimetric analysis coupled with mass spectrometry and scanning electron microscopy with energy dispersive spectrometry. Our results show that crystalline enstatite produces small amounts of the anhydrous form of MgCO 3 (magnesite), while amorphous MgSiO 3 , which was used to simulate mafic glass, more readily converts to the hydrated/hydroxylated hydromagnesite [Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O]. These results, supplemented with dynamic vapor sorption experiments, suggest that surface properties play a significant role in the pathway and degree of carbonation. These developments concerning the reactivity of CO 2 with reactive mafic phases will help further our understanding of the reactivity of these mafic-ultramafic minerals with implications for permanent carbon storage and other subsurface engineering scenarios involving reactive reservoirs.

basalt↗

A Focused Ion Beam-Scanning Transmission Electron Microscopy with Energy-Dispersive X-ray Spectroscopy Study on Technetium Incorporation within Iron Oxides through Fe(OH) 2 (s) Mineral Transformation

Incorporation of Tc(IV) into iron oxide/hydroxide minerals has been explored and proposed as a promising pathway to preventing Tc(IV) reoxidation to environmentally mobile pertechnetate (TcO 4 - ) and improving long-term immobilization of radioactive technetium-99 (Tc). However, visual evidence evaluating the distribution of Tc(IV) incorporated within iron oxide/hydroxide phases has not been available, until now, despite potential implications on Tc(IV) stability within the host phase. For the purpose of this study Tc(IV) incorporation into iron oxide/hydroxide phases was facilitated via Fe(OH) 2 (s) oxidation and mineral transformation to magnetite (Fe 3 O 4 ). Focused ion beam - scanning transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy (FIB/STEM-EDS) methods were then combined with X-ray diffraction and absorption spectroscopy techniques to characterize and visually demonstrate that, for the first time, Tc(IV) is heterogeneously incorporated into different iron oxide/hydroxide phases as Tc(IV)-incorporated magnetite and/or TcO 2 ·2H 2 O(s) via different incorporation mechanisms. Heterogeneous distribution of Tc(IV) in magnetite suggests either (i) TcO4- is reduced quickly at the magnetite surface and then encapsulated into magnetite during continued octahedral crystal growth, or (ii) Tc(IV) alternatively partitioned into multiple layers of a blocky, plate-like morphological magnetite structure showing stratified Tc. With limited Tc-hematite (Fe 2 O 3 ) incorporation, the results suggest that TcO 2 ·2H 2 O(s) is formed and mainly associated/embedded in fibrous nanometer-sized polycrystalline hematite. This work highlights the power of modern state-of-the-art FIB/STEM-EDS approach to provide essential visual insights of the Tc-iron oxide/hydroxide incorporation and generate reliable mechanism-informed designs for waste forms relying on Tc mineral incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chelation-Driven Chemistry Controls Dissolution Pathways for Facile Critical Mineral Recovery from Ultramafic Resources

The efficient recovery of critical minerals, such as nickel (Ni) and manganese (Mn) from the subsurface is of vital importance, given their role in modern technologies ranging from batteries to advanced alloys. This study explores an approach that employs chelation to enhance critical mineral recovery from ultramafic rocks using chelating ligands under ambient pressures and systematically evaluates the extraction process for the first time. Experimental results demonstrate the superior performance of EDTA and PrDTA in achieving high extraction efficiencies for both Ni and Mn. To further highlight the ability for optimization, the fluid exchange and variation of fluid-to-rock ratio experiments were conducted, revealing tunable controls for engineering recovery. We show that under optimized conditions, a Ni extraction efficiency of ?82% and a Mn extraction efficiency of ~60% is achieved at ambient pressures, which is equivalent to over 23 times the current global Ni production, and 2 million metric tonnes (MMT) greater than the current global Mn production. From both in-situ and ex-situ mining perspectives, the results highlight the potential of chelation to advance sustainable mineral processing. Overall, this work highlights the environmental benefits of innovative ligand-assisted recovery methods, addressing the critical need for the efficient utilization of olivine resources.

Krishnan, Keerthana↗

Insights into the Mechanism of Fe(II) Adsorption and Oxidation at Fe-Clay Mineral Surfaces from First-Principles Calculations

Interfacial reactivity of redox-active iron-bearing mineral surfaces plays a crucial role in many environmental processes including biogeochemical cycling of various elements and contaminants. Herein, we apply density-functional-theory (DFT) calculations to provide atomistic insights into the heterogeneous reaction between aqueous Fe(II) and the Fe-bearing clay mineral nontronite Fe2Si4O10(OH)2 by studying its adsorption mechanism and interfacial Fe(II)-Fe(III) electron transfer (ET) at edge and basal surfaces. We find that edge-bound Fe(II) adsorption complexes at different surface sites (ferrinol, silanol and mixed) may coexist on both (010) and (110) edge facets, with complexes at ferrinol FeO(H) sites being the most energetically favorable and coupled to proton transfer. Calculation of the ET activation energy suggests that interfacial ET into dioctahedral Fe(III) sheets is probable at the clay edges and occurs predominantly but not exclusively through the complexes adsorbed at ferrinol sites and might also involve mixed sites. No clear evidence is found for complexes on basal surface that are compatible with ET through the basal sheet despite this experimentally hypothesized ET interface. This study suggests a strong pH-dependence of Fe(II) surface complexation at basal versus edge facets and highlights the importance of the protonation state of bridging ligands and proton coupled electron transfer to facilitate ET into Fe-rich clay minerals.

Environmental Molecular Sciences Laboratory↗

Electrostatic Potential of Specific Mineral Faces

Reaction rates of environmental processes occurring at hydrated mineral surfaces are primarily controlled by the electrostatic potential that develops at the interface. This potential depends on the structure of exposed crystal faces, as well as the pH and the type of ions and their interactions with these faces. Despite its importance, experimental methods for determining fundamental electrostatic properties of specific crystal faces such as the point of zero charge are few. Here we show that this information may be obtained from simple, cyclic potentiometric titration using a well characterized single-crystal electrode exposing the face of interest. The method exploits the presence of a hysteresis loop in the titration measurements that allows extraction of key electrostatic descriptors using the Maxwell construction. The approach is demonstrated for hematite (α-Fe 2 O 3 ) (001), and a thermodynamic proof is provided for the resulting estimate of its point of zero charge. Insight gained from this method will aid in predicting the fate of migrating contaminants, mineral growth/dissolution processes, mineral-microbiological interactions, and in testing surface complexation theories.

58 GEOSCIENCES↗