Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MARTENSITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

The impact of nickel concentration and stacking fault energy on deformation mechanisms in high-purity austenitic Fe-Cr-Ni alloys

Understanding how composition affects deformation mechanisms in austenitic stainless steels is essential for developing accurate predictive models of stress-induced failures and stress corrosion cracking. Nickel (Ni), an element classified as a critical element, plays a crucial role in these processes. It is important to examine how Ni concentration influences stacking fault energy (SFE) and, consequently, the deformation mechanisms of austenitic stainless steels. However, in commercial stainless steels, the effects of other alloying elements and impurities can obscure Ni's role, complicating efforts to isolate its impact. Here, in this study, we use two high-purity Fe-Cr-Ni alloys to investigate how Ni concentration and SFE interact to alter deformation mechanisms and induce martensitic transformation. By combining in situ synchrotron X-ray diffraction (XRD) tensile testing and post-mortem electron microscopy with density functional theory simulations, we gain precise insights into these phenomena. We find that the Fe18Cr10Ni (wt%) alloy, with its low SFE, exhibits higher stacking fault probability, deformation-induced martensitic transformation, and a lesser increase in dislocation density with plastic strain. In contrast, the Fe18Cr14Ni (wt%) alloy, with its higher SFE, shows enhanced deformation twinning and greater dislocation density with increasing strain. These findings from high-purity ternary alloys provide valuable insights that can guide the search for alternative elements to replace Ni while achieving similar effects on phase stability and deformation behavior.

36 MATERIALS SCIENCE↗

Investigations on the electronic, structural, magnetic properties related to shape-memory behavior in Ti{sub 2}CoX (X=Al, Ga, In)

Highlights: • The analysis of phase stability trend is studied for Ti{sub 2}CoX(X = Al, Ga, In). • Ti{sub 2}CoGa is more suitable as shape memory alloy. • Total magnetic moments disappear with a increase of c/a ratio for all systems. • Density of states at the Fermi level are also shown. - Abstract: Using the full-potential local orbital minimum-basis method, we have performed a systematic investigations on the electronic, structural, and magnetic properties related to shape memory applications for Ti{sub 2}CoX (X=Al, Ga, In) alloys. Our results confirm that these alloys are half-metallic ferromagnets with total magnetic moment of 2μ{sub B} per formula unit in austenite phase, and undergo a martensitic transformation at low temperatures. The relative stabilities of the martensitic phases differ considerably between Ti{sub 2}CoX (X=Al, Ga, In). Details of the electronic structures suggest that the differences in hybridizations between the magnetic components are responsible for trends of phase. Quantitative estimates for the energetics and the magnetizations indicate that Ti{sub 2}CoGa is a promising candidate for shape memory applications.

36 MATERIALS SCIENCE↗

Deformation behavior of Nb nanowires in TiNiCu shape memory alloy matrix

An in-situ nanowire Nb/TiNiCu composite is fabricated based on the concept of strain under-matching between a phase transforming matrix and high strength nanomaterials. The deformation behavior of the Nb nanowire was investigated by means of in-situ synchrotron X-ray diffraction when the TiNiCu matrix underwent different deformation modes. The maximum lattice strain of the Nb nanowires was about 5% when the matrix deformed via martensitic transformation or 1% when deforming plastically by dislocation slip. As a result, the Nb nanowires showed a lattice strain of 3.5% when the matrix deformed in the mixed mode of plastic deformation and martensitic transformation, which means that the occurrence of plastic deformation does not impede load transfer from the matrix to the nanowires.

36 MATERIALS SCIENCE↗

Gradient twinned 304 stainless steels for high strength and high ductility

Gradient materials often have attractive mechanical properties that outperform uniform microstructure counterparts. It remains a difficult task to investigate and compare the performance of various gradient microstructures due to the difficulty of fabrication, the wide range of length scales involved, and their respective volume percentage variations. We have investigated four types of gradient microstructures in 304 stainless steels that utilize submicrotwins, nanotwins, nanocrystalline-, ultrafine- and coarse-grains as building blocks. Tensile tests reveal that the gradient microstructure consisting of submicrotwins and nanotwins has a persistent and stable work hardening rate and yields an impressive combination of high strength and high ductility, leading to a toughness that is nearly 50% higher than that of the coarse-grained counterpart. Ex- and in-situ transmission electron microscopy indicates that nanoscale and submicroscale twins help to suppress and limit martensitic phase transformation via the confinement of martensite within the twin lamellar. Twinning and detwinning remain active during tensile deformation and contribute to the work hardening behavior. We discuss the advantageous properties of using submicrotwins as the main load carrier and nanotwins as the strengthening layers over those coarse and nanocrystalline grains. Furthermore, our work uncovers a new gradient design strategy to help metals and alloys achieve high strength and high ductility.

36 MATERIALS SCIENCE↗

Revealing cyclic hardening mechanism of a TRIP steel by real-time in situ neutron diffraction

Real-time in situ neutron diffraction was performed on a transformation-induced plasticity (TRIP) steel under cyclic loading at room temperature. By Rietveld refinement and single peak analysis, the volume fraction and average stress estimates as well as dislocation density of individual phases (austenite and martensite phase) were derived. The results reveal that the volume fraction of martensite phase, instead of individual phase strengthening, should be accounted for the remarkable secondary cyclic hardening.

Austenitic steels↗

Unoccupied electronic structure of Ni 2 MnGa ferromagnetic shape memory alloy

Momentum resolved inverse photoemission spectroscopy measurements show that the dispersion of the unoccupied bands of Ni 2 MnGa is significant in the austenite phase. Furthermore, in the martensite phase, it is markedly reduced, which is possibly related to the structural transition to an incommensurate modulated state in the martensite phase. Finally, based on the first principle calculations of the electronic structure of Ni–Mn–Ga, we show that the modification of the spectral shape with surface composition is related to change in the hybridization between the Mn 3d and Ni 3d-like states that dominate the unoccupied conduction band.

36 MATERIALS SCIENCE↗

In-situ synchrotron X-ray diffraction investigation on deformation behavior of Nb/NiTi composite during pre-straining process

The mechanisms responsible for deformation behavior in Nb/NiTi composite during pre-straining were investigated systematically using in-situ synchrotron X-ray diffraction, transmission electron microscopy and tensile test. It is shown that upon loading, the composite experiences elastic elongation and slight plastic deformation of B19', B2 and β-Nb phases, together with the forward stress-induced martensitic (SIM) transformation from B2 to B19'. Upon unloading, the deformation mechanisms of the composite mainly involve elastic recovery of B19', B2 and β-Nb phases, compression deformation of β-Nb phase and incomplete B19'→B2 reverse SIM transformation. In the tensile loading-unloading procedure, besides the inherent elastic deformation and SIM transformation, the (001) compound twins in B19' martensite can also be conducive to the elastic deformation occurring in B19'-phase of the composite. Therefore, this composite can exhibit a large recoverable strain after unloading owing to the elastic deformation, and the partially reversible and consecutive SIM transformation together with the (001) compound twins.

36 MATERIALS SCIENCE↗

Functionally grading the shape memory response in NiTi films: Laser irradiation

A new process and mechanism are presented for controlling the shape memory response spatially within monolithic NiTi thin film structures. This technique is shown to effectively control the martensitic phase transformation temperature and exhibits control over aspects of the mechanical and shape memory responses as well. Specifically, the martensitic phase transformation temperature decreases with incident laser energy density. Concomitant modifications are observed in both the mechanical and shape memory responses in laser processed films. Analysis and characterization are performed via temperature controlled optical microscopy, x-ray diffraction, atomic force microscopy, and nanoindentation.

36 MATERIALS SCIENCE↗

Magnetic-field-induced transformation in FeMnGa alloys

A kind of ferromagnetic shape memory alloy with off-stoichiometric composition of Heusler alloy Fe{sub 2}MnGa has been synthesized. By optimizing composition, the martensitic transformation has been modified to occur at about 163 K accompanying spontaneous magnetization, which enables a magnetic field-induced structural transition from a paramagnetic parent phase to a ferromagnetic martensite with high magnetization of 93.8 emu/g. The material performs a quite large lattice distortion through the transformation, (c-a)/c=33.5%, causing a shape memory strain upto 3.6%. Such large lattice distortions strongly influence the electron structures, and thus some special physical behavior related to the transport and conductive properties is investigated.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Ultrathin Stainless Steel Films

We report on the preparation of polycrystalline austenitic 310 ({sup 57}Fe{sub 0.55}Cr{sub 0.25}Ni{sub 0.20}) stainless steel (SS) thin films on Si substrates and the characterization of their residual magnetism via {sup 57}Fe conversion-electron Moessbauer spectroscopy (CEMS). The films were structurally characterized at room temperature by X-ray diffraction (XRD). The virgin films were found to be structurally disordered. Subsequent annealing at moderate temperatures in ultrahigh vacuum produces the ordered martensitic and austenitic SS phases. Further annealing at higher temperatures (up to temperatures where long-range diffusion into the substrate is still weak) transforms the films into the austenitic phase with no trace of a magnetic hyperfine interaction. However, when a 2 nm thick SS thin film is embedded between two carbon layers, the as prepared disordered SS film does not transform to the martensitic or austenitic SS phase irrespective of the annealing temperature, probably because the interdiffusion with C prohibits the formation of these phases.

36 MATERIALS SCIENCE↗

Inverse magnetocaloric effect in Mn{sub 2}NiGa and Mn{sub 1.75}Ni{sub 1.25}Ga magnetic shape memory alloys

Inverse magnetocaloric effect is demonstrated in Mn{sub 2}NiGa and Mn{sub 1.75}Ni{sub 1.25}Ga magnetic shape memory alloys. The entropy change at the martensite transition is larger in Mn{sub 1.75}Ni{sub 1.25}Ga, and it increases linearly with magnetic field in both the specimens. Existence of inverse magnetocaloric effect is consistent with the observation that magnetization in the martensite phase is smaller than the austenite phase. Although the Mn content is smaller in Mn{sub 1.75}Ni{sub 1.25}Ga, from neutron diffraction, we show that the origin of inverse magnetocaloric effect is the antiferromagnetic interaction between the Mn atoms occupying inequivalent sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-optical spectroscopy of ferromagnetic shape-memory Ni-Mn-Ga alloy

Magneto-optical properties of single crystal of Ni{sub 50.1}Mn{sub 28.4}Ga{sub 21.5} magnetic shape memory alloy in martensite and austenite phase were systematically studied. Crystal orientation was approximately along (100) planes of parent cubic austenite. At room temperature, the sample was in modulated 10M martensite phase and transformed to cubic austenite at 323 K. Spectral dependence of polar magneto-optical Kerr effect was obtained by generalized magneto-optical ellipsometry with rotating analyzer in the photon energy range from 1.2 to 4 eV, and from room temperature to temperature above the Curie point. The Kerr rotation spectra exhibit prominent features typical for complexes containing Mn atoms. Significant spectral changes during transformation to austenite can be explained by different optical properties caused by changes in density of states near the Fermi energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of heat treatment temperature on nitinol wire

In-situ synchrotron X-ray diffraction has been used to study the influence of the heat treatment temperature on the subsequent micromechanical behavior of nitinol wire. It was found that increase in the heat treatment temperature rotated the austenite texture from the (332){sub B2} fiber towards the (111){sub B2} fiber, and the texture of the Stress-Induced Martensite phase changed from the (1{sup ¯}40){sub B19'} to the (1{sup ¯}20){sub B19'} fiber accordingly. Heat treatment at a low temperature reduces the internal residual strains in the austenite during super-elastic deformation and therefore improves the materials fatigue performance. The development of internal residual strains in austenite is controlled by transformation induced plasticity and the reversal martensite to austenite transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Possible contribution of low shear modulus C{sub 44} to the low Young's modulus of Ti-36Nb-5Zr alloy

Despite the importance of single-crystal elastic constants of β-phase titanium alloys in understanding their low Young's modulus—a property crucial for many applications, such data are often difficult to obtain when the alloy composition is close to the instability limit of the β phase, where the presence of α' martensite precludes the fabrication of β-phase single crystal. In the present study, we extracted the single-crystal elastic constants of such a β-phase titanium alloy with low Young's modulus, Ti-36Nb-5Zr (wt. %), from polycrystalline specimens by using an in-situ synchrotron X-ray diffraction technique. It is indicated that the low Young's modulus of the alloy originates from the anomalously low shear modulus C{sub 44} as well as the low shear modulus C′, which is different from a common viewpoint that the Young's modulus of β-phase titanium alloys is dominantly controlled by the C′. This suggests that low C{sub 44} is an important contributor to low Young's modulus for instable β-phase titanium alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-induced dimensionality crossover of precursor modulations in Ni 2 MnGa

Precursor modulations often occur in functional materials like magnetic shape memory alloys, ferroelectrics, and superconductors. In this letter, we have revealed the underlying mechanism of the precursor modulations in ferromagnetic shape memory alloys Ni 2 MnGa by combining synchrotron-based x-ray diffraction experiments and first-principles phonon calculations. We discovered the precursor modulations along [011] direction can be eliminated with [001] uniaxial loading, while the precursor modulations or premartensite can be totally suppressed by hydrostatic pressure condition. The TA 2 phonon anomaly is sensitive to stress induced lattice strain, and the entire TA 2 branch is stabilized along the directions where precursor modulations are eliminated by external stress. Furthermore, our discovery bridges precursor modulations and phonon anomalies, and sheds light on the microscopic mechanism of the two-step superelasticity in precursor martensite.

36 MATERIALS SCIENCE↗

Epitaxial Ni-Mn-Ga-Co thin films on PMN-PT substrates for multicaloric applications

Multicaloric stacks consisting of a magnetocaloric film on a piezoelectric substrate promise improved caloric properties as the transition temperature can be controlled by both magnetic and electric fields. We present epitaxially grown magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.72}Ti{sub 0.28}O{sub 3} substrates. Structure and microstructure of two samples, being in the austenitic and martensitic state at room temperature, are investigated by X-ray diffraction in two- and four-circle geometry and by atomic force microscopy. In addition, high temperature magnetometry was performed on the latter sample. The combination of these methods allows separating the influence of epitaxial growth and martensitic transformation. A preferential alignment of twin boundaries is observed already in the as-deposited state, which indicates the presence of prestress, without applying an electric field to the substrate. A temperature-magnetic field phase diagram is presented, which demonstrates the inverse magnetocaloric effect of the epitaxial Ni-Mn-Ga-Co film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress transfer during different deformation stages in a nano-precipitate-strengthened Ni-Ti shape memory alloy

Understanding the role of fine coherent precipitates in the micromechanical behavior of precipitate-strengthened shape memory alloys (SMAs), which still remains a mystery heretofore, is of crucial importance to the design of advanced SMAs with optimal functional and mechanical properties. Here, we investigate the lattice strain evolution of, and the stress partition between the nanoscale Ni{sub 4}Ti{sub 3} precipitates and the matrix in a precipitate-strengthened Ni-Ti SMA during different deformation stages by in-situ synchrotron high-energy X-ray diffraction technique. We found that, during R-phase reorientation and stress-induced martensitic transformation, which both involve the shear deformation process, the lattice strain of the nanoscale precipitates drastically increases by a magnitude of 0.5%, which corresponds to an abrupt increase of ∼520 MPa in internal stress. This indicates that stress repartition occurs and most of the stress is transferred to the precipitates during the shear deformation of the matrix. It is further revealed that the nanoscale precipitates which only have a low volume fraction bear a considerable amount of applied stress during all deformation stages investigated, implying that the nanoscale precipitates play an important role in the deformation behavior of the precipitate-strengthened Ni-Ti SMAs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Producing titanium-niobium alloy by high energy beam

The research is involved in producing a Ti-Nb alloy surface layer on titanium substrate by high energy beam method, as well as in examining their structures and mechanical properties. Applying electron-beam cladding it was possible to produce a Ti-Nb alloy surface layer of several millimeters, where the niobium concentration was up to 40% at. and the structure itself could be related to martensite quenching structure. At the same time, a significant microhardness increase of 3200-3400 MPa was observed, which, in its turn, is connected with the formation of martensite structure. Cladding material of Ti-Nb composition could be the source in producing alloys of homogeneous microhardness and desired concentration of alloying niobium element.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗