Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Effect of the cadmium chloride treatment on RF sputtered Cd{sub 0.6}Zn{sub 0.4}Te films for application in multijunction solar cells

Single phase Cd{sub 0.6}Zn{sub 0.4}Te (CdZnTe) films of 1 μm thickness were deposited by radio frequency planar magnetron sputter deposition on commercial soda lime glass samples coated with fluorine-doped tin oxide and cadmium sulphide (CdS). The stack was then treated with cadmium chloride (CdCl{sub 2}) at different temperatures using a constant treatment time. The effect of the CdCl{sub 2} treatment was studied using optical, materials, and electrical characterization of the samples and compared with the as-deposited CdZnTe film with the same stack configuration. The band gap deduced from Tauc plots on the as-deposited CdZnTe thin film was 1.72 eV. The deposited film had good crystalline quality with a preferred orientation along the {111} plane. After the CdCl{sub 2} treatment, the absorption edge shifted toward longer wavelength region and new peaks corresponding to cadmium telluride (CdTe) emerged in the x-ray diffraction pattern. This suggested loss of zinc after the CdCl{sub 2} treatment. The cross sectional transmission electron microscope images of the sample treated at 400 °C and the energy dispersive elemental maps revealed the absence of chlorine along the grain boundaries of CdZnTe and residual CdTe. The presence of chlorine in the CdTe devices plays a vital role in drastically improving the device performance which was not observed in CdZnTe samples treated with CdCl{sub 2}. The loss of zinc from the surface and incomplete recrystallization of the grains together with the presence of high densities of stacking faults were observed. The surface images using scanning electron microscopy showed that the morphology of the grains changed from small spherical shape to large grains formed due to the fusion of small grains with distinct grain boundaries visible at the higher CdCl{sub 2} treatment temperatures. The absence of chlorine along the grain boundaries, incomplete recrystallization and distinct grain boundaries is understood to cause the poor performance of the fabricated devices.

36 MATERIALS SCIENCE↗

Time-resolved electron energy distribution functions at the substrate during a HiPIMS discharge with cathode voltage reversal

Abstract The time-dependent plasma properties of a high-power impulse magnetron sputtering plasma are investigated which include a positive ‘kick’ pulse on the sputtering target 2 μ s after the main negative pulse, this reversing the voltage on the cathode. At a substrate 15 cm distant from the magnetron, the time-dependent electron energy distribution function (EEDF), plasma potential, potential commute time and plasma diffusion properties are measured using a single Langmuir probe. Results show that the positive pulse on the target expels plasma and raises the plasma potential across the chamber on the order of 1 to 2 μ s, which is the time scale of the electron diffusion. The EEDF at the substrate fits a Druyvesteyn distribution during the main negative pulse rising slightly in average energy over time. The distribution is still Druyvesteyn and at the very start of the positive pulse, but then loses the higher energy electrons and drops in average electron energy as the positive pulse progresses. A Boltzmann equation solver, BOLSIG+, was used to predict the EEDF at the substrate during the positive pulse and it agrees best with the measurements assuming a value of 0.2 Td for the E / N (electric field/gas number density).

Physics↗

Sputter-deposited low-stress boron carbide films

Significant challenges have been faced in the manufacturing of low-stress B 4 C films. Here, we demonstrate a set of process parameters for direct-current magnetron sputter deposition of smooth, high-purity, amorphous B 4 C films with near-zero total residual stress and with thicknesses up to 10 μm. Films are characterized by a combination of high-energy ion scattering, x-ray diffraction, electron microscopy, and stress measurements based on substrate curvature. In order to facilitate the process transfer to other sputtering geometries, the favorable deposition conditions are correlated with distributions of landing energies and incident angles of depositing species estimated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Based on such simulations, a decrease in compressive stress with increasing Ar working gas pressure is attributed to the corresponding broadening of the angular distribution of depositing species and associated atomic shadowing effects.

36 MATERIALS SCIENCE↗

Deposition of Nb3Sn films by multilayer sequential sputtering for SRF cavity application

Nb3Sn is considered as an alternative of Nb for SRF accelerator cavity application due to its potential to obtain higher quality factors and higher accelerating gradients at a higher operating temperature. Magnetron sputtering is one of the effective techniques that can be used to fabricate Nb3Sn on SRF cavity surface. We report on the surface properties of Nb3Sn films fabricated by sputtering multiple layers of Nb and Sn on sapphire and niobium substrates followed by annealing at 950°C for 3 h. The crystal structure, film microstructure, composition and surface roughness were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM). The RF performance of the Nb3Sn coated Nb substrates were measured by a surface impedance characterization system. We also report on the design of a multilayer sputter deposition system to coat a single-cell SRF cavity.

Sayeed, Md. N.↗

A novel Mo-W interlayer approach for CVD diamond deposition on steel

Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD) processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42) substrates using a multi-structured molybdenum (Mo) – tungsten (W) interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

36 MATERIALS SCIENCE↗

An (ultra) high-vacuum compatible sputter source for oxide thin film growth

A miniaturised CF-38 mountable sputter source for oxide and metal thin film preparation with enhanced high-vacuum and ultra-high-vacuum compatibility is described. The all home-built sputtering deposition device allows a high flexibility also in oxidic sputter materials, suitable deposition rates for preparation of films in the nm- and the sub-monolayer regime and excellent reliability and enhanced cleanliness for usage in UHV chambers. For a number of technologically important – yet hardly volatile – materials, the described source represents a significant improvement over thermal deposition techniques like electron-beam- or thermal evaporation, as especially the latter are no adequate tool to prepare atomically clean layers of refractory oxide materials. Furthermore, it is superior to commercially available magnetron sputter devices, especially for applications, where highly reproducible sub-monolayer thin film preparation under very clean UHV conditions is required (e.g., for studying phase boundary effects in catalysis). The device in turn offers the usage of a wide selection of evaporation materials and special target preparation procedures also allow the usage of pressed oxide powder targets. To prove the performance of the sputter-source, test preparations with technologically relevant oxide components, comprising ZrO{sub 2} and yttrium-stabilized ZrO{sub 2}, have been carried out. A wide range of characterization methods (electron microscopy, X-ray photoelectron spectroscopy, low-energy ion scattering, atomic force microscopy, and catalytic testing) were applied to demonstrate the properties of the sputter-deposited thin film systems.

36 MATERIALS SCIENCE↗

Mechanical and Frictional Performance of Ta and Ta-Ag Alloy Films Deposited at Different Sputtering Powers

The mechanical and tribological properties of tantalum and its alloy films are greatly influenced by their phase transformation. In this study, Ta and Ta-Ag films were prepared on carbon steel substrate by DC magnetron sputtering with various sputtering powers. The amorphous and nanocrystalline Ta and Ta-Ag film were produced at different sputtering powers from 40 to 110 W. The frictional properties of Ta and Ta-Ag films were investigated by rubbing against Si{sub 3}N{sub 4} ball from RT to 700 °C. The nanocrystalline Ta-Ag films shows higher hardness values (12 GPa) compared with amorphous phase. The nanocrystalline Ta90-Ag8 film shows a low friction coefficient of about 0.20-0.30 when rubbing against Si{sub 3}N{sub 4} ball at 700 °C. The segregation of Ag can effectively reduce friction coefficients of Ta-Ag film at 700 °C. The Ta-Ag films show high structure stability even after friction at 700 °C.

36 MATERIALS SCIENCE↗

Cu and Ni Co-sputtered heteroatomic thin film for enhanced nonenzymatic glucose detection

Abstract In this work, we report a wafer-scale and chemical-free fabrication of nickel (Ni) and copper (Cu) heteroatomic Cu–Ni thin films using RF magnetron sputtering technique for non-enzymatic glucose sensing application. The as-prepared wafer-scale Cu–Ni thin films exhibits excellent electrocatalytic activity toward glucose oxidation with a 1.86 μM detection limit in the range of 0.01 mM to 20 mM range. The Cu–Ni film shows 1.3- and 5.4-times higher glucose oxidation activity in comparison to the Cu and Ni electrodes, respectively. The improved electrocatalytic activity is attributed to the synergistic effect of the bimetallic catalyst and high density of grain boundaries. The Cu–Ni electrodes also possessed excellent anti-interference characteristics. These results indicate that Cu–Ni heteroatomic thin film can be a potential candidate for the development of non-enzymatic glucose biosensor because of its chemical free synthesis, excellent reproducibility, reusability, and long-term stability.

59 BASIC BIOLOGICAL SCIENCES↗

Optical constants determination of samarium, holmium, and erbium in the 1.5-850 eV spectral range using a transmittance method

The optical constants {beta} and {delta} of the complex refractive index n{approx}=1-{delta}+i{beta} of Sm, Ho, and Er were obtained in the 1.5-850eV energy range using a transmittance method. Thin films of Sm, Ho, and Er were deposited by magnetron sputtering, and transmittance was measured using synchrotron radiation under a high vacuum condition. All films were directly coated on Si photodiodes, which were used as coating substrates, as well as photon detectors. Si was used as capping layer while a thin W layer was used as barrier against interface diffusion between Si and the highly reactive rare earth elements. The constants {beta} were extracted from transmittance results, and the constants {delta} were calculated based on measured {beta} values using the Kramers-Kronig formalism. Small deficiencies determined from the present data using the partial sum rules were partly attributed to the sputtered film densities that could be slightly lower than the bulk values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning magnetic properties of yttrium iron garnet film with oxygen partial pressure in sputtering and annealing process

In this paper, the magnetic properties of these films which deposited and annealed at different atmospheres were investigated. The experimental results show that the magnetic properties of yttrium iron garnet films prepared by rf magnetron sputtering method can be tuned with oxygen partial pressure in sputtering and annealing processes. The optimal condition is depositing in atmosphere of R=0 and annealing at 0.5 Pa O{sub 2}, or depositing in atmosphere of R=2% and annealed in vacuum.

36 MATERIALS SCIENCE↗

Magnetic-field-dependent morphology of self-organized Fe on stepped Si(111) surfaces

The present work reports on Fe thin films grown on vicinal Si(111) substrates via rf magnetron sputtering. The dependencies of the growth mode and magnetic properties of the obtained iron nanostructures on both crystallographic surface orientation and on the direction of the very weak stray magnetic field from the magnetron gun were studied. Scanning tunneling microscopy images showed strong dependence of the Fe grains' orientation on the stray field direction in relation to the substrate's steps demonstrating that, under appropriately directed magnetic field, Si surfaces can be used as templates for well-defined self-assembled iron nanostructures. Magneto-optical Kerr effect hysteresis loops showed an easy-axis coercivity almost one order of magnitude smaller for the film deposited with stray field applied along the steps, accompanied with a change in the magnetization reversal mode. Phenomenological models involving coherent rotation and/or domain-wall unpinning were used for the interpretation of these results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Bandgap Engineering of Cu(In 1-x Gax)Se 2 Absorber Layers Fabricated using CuInSe 2 and CuGaSe 2 Targets for One-Step Sputtering Process

Here we have demonstrated that the bandgap of Cu(In 1-x Ga x )Se 2 (CIGS) absorber layers was readily controlled by using a one-step sputtering process. CIGS thin-film sample libraries with different Ga/(In + Ga) ratios were synthesized on soda-lime glass at 550 °C using a combinatorial magnetron sputtering system employing CuInSe 2 (CIS) and CuGaSe 2 (CGS) targets. Energy-dispersive X-ray fluorescence spectrometry (EDS-XRF) confirmed that the CIGS films had different Ga/(In + Ga) ratios, which were varied by the sample configuration on the substrate and ranged from 0.2 to 0.9. X-ray diffraction and Raman spectroscopy revealed that the CIGS films had a pure chalcopyrite phase without any secondary phase such as Cu-Se or ordered vacancy compound (OVC), respectively. Furthermore, we found that the optical bandgap energies of the CIGS films determined by transmittance measurements ranged from 1.07 eV to 1.53 eV as the Ga/(In + Ga) ratio increased from 0.2 to 0.9, demonstrating that the one-step sputtering process using CIS and CGS targets is another simple route to control the bandgap energy of the CIGS absorber layer.

14 SOLAR ENERGY↗

Bandgap widening in thermochromic Mg-doped VO{sub 2} thin films: Quantitative data based on optical absorption

Thermochromic Mg-doped VO{sub 2} films were deposited by reactive direct current magnetron sputtering onto heated glass and carbon substrates. Elemental compositions were inferred from Rutherford backscattering. Optical bandgaps were obtained from spectral transmittance and reflectance measurements—from both the film side and the back side of the samples—and ensuing determination of absorption coefficients. The bandgap of Mg-doped films was found to increase by 3.9 ± 0.5 eV per unit of atom ratio Mg/(Mg + V) for 0 < Mg/(Mg + V) < 0.21. The presence of ∼0.45 at. % Si enhanced the bandgap even more.

36 MATERIALS SCIENCE↗

Self-organization processes in highly epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films grown on SrTiO{sub 3} (001) substrates

We report on the growth of highly epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films on SrTiO{sub 3} (001) oriented substrates by rf magnetron sputtering. It is shown that structural strain caused by lattice mismatch between film and substrate and kinetics growing instabilities may offer unique opportunities to control the film morphologies. By increasing growth rate, the surface morphology undergoes a dramatic transformation: from very smooth surface through arrays of mounds or antidots to hatched morphology. All nano-objects form long-range ordered arrays running in the steps direction defined by the miscut angle of underlying substrate. These self-assembled structures are of high interest envisaging a new route for the fabrication of oxide-based magnetoelectronic devices by using a bottom-up approach.

36 MATERIALS SCIENCE↗

Synthesis,Structure and Electrical Properties of(SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x}(x=0.5-1) Nanocomposites

The experimental results of synthesizing thin films (<1 {mu}m thick) of (SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x} (x = 0.5-1 wt) nanocomposites fabricated by high-frequency magnetron sputtering of metal-oxide targets in a controlled Ar + O{sub 2} atmosphere are presented. The films, deposited on hot substrates (400 Degree-Sign C), are studied by the X-ray diffraction analysis, atomic-force microscopy, and optical and electrical methods. The effect of the synthesis conditions and film composition on the size of crystalline grains, band gap, and the concentration and mobility of free charge carriers was determined. It is shown that films of the composition (SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x} with x = 0.9 are the most promising for applications in gas sensorics.

36 MATERIALS SCIENCE↗

Giant magnetoresistance and superparamagnetism in Dy{sub x}Fe{sub 100-x} nanogranular magnetic thin films at room temperature

In this article, Dy{sub x}Fe{sub 100-x} nanogranular (15 ≤ x ≤ 25) thin films have been prepared at ambient temperature by dc magnetron sputtering. The correlation between the microstructure, magneto transport and magnetization properties is discussed. The grain size of Dy (Dysprosium) and Fe (Iron) was measured to be about 2 to 3 nm, respectively and the distribution of grains was homogenous throughout the sample. The magnetoresistance is sensitive to microstructural changes (particle size as well as Dy concentration). At the room temperature, the magnetoresistance [MR %] increased from 0.2 to 2.2 with increase in atomic concentration of Dy from x = 15 to 25 and we obtained maximum 2.2 MR [%] for x = 25 in this series of samples. The magnetization studies have revealed that all the samples are superparamagnetic (SPM) at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tilt of the columnar microstructure in off-normally deposited thin films using highly ionized vapor fluxes

The tilt of the columnar microstructure has been studied for Cu and Cr thin films grown off-normally using highly ionized vapor fluxes, generated by the deposition technique high power impulse magnetron sputtering. It is found that the relatively large column tilt (with respect to the substrate normal) observed for Cu films decreases as the ionization degree of the deposition flux increases. On the contrary, Cr columns are found to grow relatively close to the substrate normal and the column tilt is independent from the ionization degree of the vapor flux when films are deposited at room temperature. The Cr column tilt is only found to be influenced by the ionized fluxes when films are grown at elevated temperatures, suggesting that film morphology during the film nucleation stage is also important in affecting column tilt. A phenomenological model that accounts for the effect of atomic shadowing at different nucleation conditions is suggested to explain the results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tungsten oxide proton conducting films for low-voltage transparent oxide-based thin-film transistors

Tungsten oxide (WO{sub x}) electrolyte films deposited by reactive magnetron sputtering showed a high room temperature proton conductivity of 1.38 Multiplication-Sign 10{sup -4} S/cm with a relative humidity of 60%. Low-voltage transparent W-doped indium-zinc-oxide thin-film transistors gated by WO{sub x}-based electrolytes were self-assembled on glass substrates by one mask diffraction method. Enhancement mode operation with a large current on/off ratio of 4.7 Multiplication-Sign 10{sup 6}, a low subthreshold swing of 108 mV/decade, and a high field-effect mobility 42.6 cm{sup 2}/V s was realized. Our results demonstrated that WO{sub x}-based proton conducting films were promising gate dielectric candidates for portable low-voltage oxide-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗