Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd–Fe–B Permanent Magnet Powders

Rapidly solidified Nd{sub 15}Fe{sub 77}B{sub 8} magnetic alloy powders have been produced by using melt-spinning method. Different wheel surface structures such as smooth and textured were tested to investigate the effect of wheel surface morphology on powder shape, microstructure, Curie temperature, and magnetic properties. Produced powders were subjected to surfactant-active ball-milling process for powder size reduction and to enhance magnetic and thermal properties. Generally, flaky-shaped powders were obtained with smooth surface wheels and spherical-shaped powders were produced with textured surface wheel. Microstructure of flaky-shaped powders consisted of polygonal fine equiaxed grains with an average grain size of 0.45 µm. Spherical-shaped powders had dendritic microstructure regardless of their sizes. Both flaky and spherical powders involved hard magnetic Nd{sub 2}Fe{sub 14}B phase located in the grain interior and a fine network of Nd-rich phase at the grain boundaries. Surfactant-active ball-milling process significantly contributed to magnetic and thermal properties of powders. The coercivity values of flaky-shaped powders milled for 90, 150, 210, 270, 330, and 390 min milling times were substantially higher than that of spherical-shaped powders milled for the same period of times. The Curie temperatures of Nd{sub 15}Fe{sub 77}B{sub 8} ingot alloy and spherical- and flaky-shaped powders were found as 279, 305, and 321 {sup ∘}C, respectively. On the other hand, the Curie temperatures of flaky- and spherical-shaped powders milled for 390 min were measured as 331 and 311 {sup ∘}C, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Relaxation Experiments in CNT-Based Magnetic Nanocomposite

In this work, we discuss the relaxation of the magnetic moments in a novel carbon nanotube (CNT)-based nanocomposite synthesized by using chemical vapor deposition process. The material consists of a matrix of CNT filled by Fe-based nanoparticles. This structure is seen clearly by scanning and transmission. X-ray diffraction and Raman spectroscopy are used to detect the predominant Fe{sub 3}C phase and the CNT presence in the sample, respectively. The results obtained from both hysteresis cycles, M(H), and zero field cooled-field cooled (ZFC-FC) measurements confirm that the material is characterized by both a strong ferromagnetic exchange and random magnetic anisotropy. For the first time, we have been able to fit the magnetic relaxation data, M(t), by using both the two distributions of nanoparticles data deduced from the ZFC-FC data and the temperature dependence of the magnetic anisotropy obtained from the law of approach to saturation in random magnets. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-temperature magnetization relaxation in magnetic molecular solids

The low temperature relaxation of the magnetization in molecular magnetic solids such as Fe{sub 8} is studied using Monte Carlo simulations. A set of rate equations is then developed to understand the simulations, and the results are compared. The simulations show that the magnetization of an initially saturated sample deviates as a square-root in time at short times, as observed experimentally, and this law is derived from the rate equations analytically. -- Highlights: •A novel set of non-linear rate equations for the coupled evolution of the magnetization and dipole field distribution. •An analytic derivation of the short-time square root in time behavior of the magnetization relaxation. •Agreement between theory and simulations without further fitting parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Active magnetic regenerative cooling with smaller magnets

Magnetocaloric heat pumping near room temperature, a.k.a. magnetic cooling, relies on the active regenerator cycle to achieve functional temperature spans and realize economic and societal benefits promised by this emerging solid-state cooling technology. The cycle itself depends upon synchronizing oscillating flow of a heat transfer fluid through a solid porous active material matrix, or the refrigerant, with periods when the refrigerant is in the highest available (field-on) and in nearly zero (field-off) magnetic fields to accomplish heat transfer. With this in mind, in this work we analyze varying flow and magnetic field wave forms and the timing between when the fluid is pumped and when the magnetic field is turned on and off. We demonstrate that the volume and the cost of permanent magnet generating the field changes can be cut nearly in half with little to no effect on the device temperature span and cooling power normalized by the refrigerant mass.

36 MATERIALS SCIENCE↗

Simple correction for the sample shape and radial offset effects on SQUID magnetometers: Magnetic measurements on Ln{sub 2}O{sub 3} (Ln=Gd, Dy, Er) standards

An increased focus on magnetic measurements of oriented single crystals, thin films, and magnetically dilute systems has led to a demand for the measurement of weak magnetic moments. This level of sensitivity and precision can be achieved on SQUID magnetometers by decreasing the size of the detection coils. However, the smaller detection coils can amplify two errors in the magnitude of the measured moment, the sample shape and radial offset effects, which were small and typically unaccounted for on previous magnetometers. We report a simple method to determine the radial offset of a sample by taking advantage of the two basic scan modes, DC and lock-in, typically used on magnetometers. This technique allows for the correction of the sample shape and radial offset effects in order to obtain the true moment of a sample. To show the efficacy of this technique, we report the magnetic properties of Ln{sub 2}O{sub 3} (Ln=Gd, Dy, Er). - Graphical abstract: Correction for the sample shape and radial offset effects on SQUID magnetometers using a combination of DC and VSM scan data. - Highlights: • Sample shape and radial offset effects alter the moment measured by magnetometers. • We present a simple method to correct for these sample effects on magnetometers. • We measure magnetic susceptibilities of Ln{sub 2}O{sub 3} to show the efficacy of this method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of crystallographic orientation and applied magnetic field on domain structure in duplex stainless steel studied using magnetic force microscopy

Highlights: • Ferrite phase in a duplex stainless steel consists of stripe type domains. • Domain contrast decreases with deviation of plane normal from <100>. • Domain width increases with deviation of plane normal from <100>. • Domain alignment with applied field observed along <100> directions. • Grain boundary stray field is a function of misorientation between grains. - Abstract: The paper investigates the local micro-magnetization behavior in duplex stainless steel (DSS) using magnetic force microscopy (MFM). DSS has equal amount of austenite phase in ferrite matrix. The MFM imaging clearly differentiates ferrite phase (ferromagnetic) from the austenite phase (paramagnetic) due to the maze type magnetic domains present in the ferrite phase. The magneto crystalline anisotropic effect on the domain structure is discussed with the support of electron backscatter diffraction (EBSD) measurements. The MFM phase contrast and domain width are correlated with the orientation of surface normal with respect to the easy axis of magnetization (<100>). The influence of external magnetic field (±127 kA/m) application on the domain structure is studied as a function of the grain orientation and the leakage field at the grain boundaries is analyzed based on the mis-orientation between the grains.

36 MATERIALS SCIENCE↗

Room temperature magnetic ordering and analysis by bound magnetic polaron model of Yb3+ doped nanocrystalline zinc oxide (Zn0.98Yb0.02O)

Highlights: • ZnO and Yb doped ZnO are synthesized by co-precipitation method. • Rietvelt anlysis of XRD patterns confirms the complete substitution of Yb{sup 3+} in ZnO. • Vacancy and defect mediated RTFM is introduced in doped ZnO. • BMP model successfully analyze the magnetic property of Zn{sub 0.98}Yb{sub 0.02}O. - Abstract: Nanocrystalline ZnO and Yb-doped ZnO (Zn{sub 0.98}Yb{sub 0.02}O) are prepared by simple co-precipitation method. The pure crystallographic phases of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are confirmed by Rietveld analyses of XRD patterns. Raman and photoluminescence spectra recorded at room temperature (RT) indicates that lattice defects and oxygen vacancy in Zn{sub 0.98}Yb{sub 0.02}O is more than that of ZnO. Magnetic measurements of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are carried out from 300 to 5 K. Ferromagnetic ordering is observed in Zn{sub 0.98}Yb{sub 0.02}O at RT and the strength of the ordering increases with the lowering of temperature. Ferromagnetism of Zn{sub 0.98}Yb{sub 0.02}O is attributed to the oxygen vacancy introduced by annealing in vacuum. Magnetization vs. temperature curve is well fitted by the combination of 3D spin wave and Curie-Weiss law, which suggest simultaneous presence of para- and ferro-magnetic phases in Zn{sub 0.98}Yb{sub 0.02}O. Ferromagnetic ordering is successfully explained by vacancy mediated bound-magnetic polaron model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cr 2.37 Ga 3 Se 8 : A Quasi-Two-Dimensional Magnetic Semiconductor

We present a novel magnetic semiconductor, Cr 2.37 Ga 3 Se 8 , synthesized by partially replacing magnetic Cr 3+ in antiferromagnetic Cr 5+δ Se 8 with nonmagnetic Ga 3+ . The crystal structure of Cr 2.37 Ga 3 Se 8 was determined by both powder and single-crystal X-ray diffraction. The title compound crystallizes in a monoclinic structure with space group C2/m (No. 12). In Cr 2.37 Ga 3 Se 8 , the Cr atoms are surrounded by 6 Se atoms and form filled octahedral clusters, while Ga atoms are centered in the Se 4 tetrahedral clusters. The two kinds of clusters pack alternatingly along the c-axis, which results in a quasi-two-dimensional layered structure. The magnetization (M) measurement shows the development of short-range ferromagnetic coupling below the Curie-Weiss (CW) temperature θ CW ~ 92 K, evidenced by the nonlinear field dependence of M. However, the magnetic susceptibility exhibits a peak at low fields at ~18 K, indicating the existence of an antiferromagnetic interaction as well. Electronic structure calculations using the WIEN2k program in the local spin density approximation indicate that the magnetism arises exclusively from local moments of the Cr atoms. Here, the electrical resistivity measurement of the Cr 2.37 Ga 3 Se 8 sample confirms that this material is a semiconductor with the band gap ~0.26 eV. Meanwhile, the experimental band gap (~0.26 eV) is close to the theoretical prediction using the WIEN2k program (~0.35 eV).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The use of amorphous boron powder enhances mechanical alloying in soft magnetic FeNbB alloy: A magnetic study

Saturation magnetization and magnetic anisotropy have been studied during mechanical alloying of Fe{sub 75}Nb{sub 10}B{sub 15} alloys prepared using crystalline and commercial amorphous boron. The evolution of saturation magnetization indicates a more efficient dissolution of boron into the matrix using amorphous boron, particularly for short milling times. The magnetization of the crystalline phase increases as boron is incorporated into this phase. Two milling time regimes can be used to describe the evolution of magnetic anisotropy: a first regime governed by microstrains and a second one mainly governed by crystal size and amorphous fraction.

36 MATERIALS SCIENCE↗

Development of fast cooling pulsed magnets at the Wuhan National High Magnetic Field Center

Pulsed magnets with fast cooling channels have been developed at the Wuhan National High Magnetic Field Center. Between the inner and outer sections of a coil wound with a continuous length of CuNb wire, G10 rods with cross section 4 mm × 5 mm were inserted as spacers around the entire circumference, parallel to the coil axis. The free space between adjacent rods is 6 mm. The liquid nitrogen flows freely in the channels between these rods, and in the direction perpendicular to the rods through grooves provided in the rods. For a typical 60 T pulsed magnetic field with pulse duration of 40 ms, the cooling time between subsequent pulses is reduced from 160 min to 35 min. Subsequently, the same technology was applied to a 50 T magnet with 300 ms pulse duration. The cooling time of this magnet was reduced from 480 min to 65 min.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spin-orbit torque magnetization switching of a three-terminal perpendicular magnetic tunnel junction

We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and its read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density 5 × 10{sup 11} A/m{sup 2} in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof of concept of a perpendicular spin-orbit torque magnetic memory cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of ion mass variation and domain size on octupolar out-of-plane magnetic field generation in collisionless magnetic reconnection

Graf von der Pahlen and Tsiklauri [Phys. Plasmas 21, 060705 (2014)] established that the generation of octupolar out-of-plane magnetic field structure in a stressed X-point collapse is due to ion currents. The field has a central region, comprising of the well-known quadrupolar field (quadrupolar components), as well as four additional poles of reversed polarity closer to the corners of the domain (octupolar components). In this extended work, the dependence of the octupolar structure on domain size and ion mass variation is investigated. Simulations show that the strength and spatial structure of the generated octupolar magnetic field is independent of ion to electron mass ratio; thus showing that ion currents play a significant role in out-of-plane magnetic structure generation in physically realistic scenarios. Simulations of different system sizes show that the width of the octupolar structure remains the same and has a spacial extent of the order of the ion inertial length. The width of the structure thus appears to be independent on boundary condition effects. The length of the octupolar structure, however, increases for greater domain sizes, prescribed by the external system size. This was found to be a consequence of the structure of the in-plane magnetic field in the outflow region halting the particle flow and thus terminating the in-plane currents that generate the out-of-plane field. The generation of octupolar magnetic field structure is also established in a tearing-mode reconnection scenario. The differences in the generation of the octupolar field and resulting qualitative differences between X-point collapse and tearing-mode are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Line broadening interference for high-resolution nuclear magnetic resonance spectra under inhomogeneous magnetic fields

Nuclear magnetic resonance spectroscopy serves as an important tool for analyzing chemicals and biological metabolites. However, its performance is subject to the magnetic-field homogeneity. Under inhomogeneous fields, peaks are broadened to overlap each other, introducing difficulties for assignments. Here, we propose a method termed as line broadening interference (LBI) to provide high-resolution information under inhomogeneous magnetic fields by employing certain gradients in the indirect dimension to interfere the magnetic-field inhomogeneity. The conventional spectral-line broadening is thus interfered to be non-diagonal, avoiding the overlapping among adjacent resonances. Furthermore, an inhomogeneity correction algorithm is developed based on pattern recognition to recover the high-resolution information from LBI spectra. Theoretical deductions are performed to offer systematic and detailed analyses on the proposed method. Moreover, experiments are conducted to prove the feasibility of the proposed method for yielding high-resolution spectra in inhomogeneous magnetic fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inter-grain interaction in random magnetic anisotropy simulation in magnetic nanocrystals

Effect of inter-grain exchange interaction on the coercive forces was analyzed with a numerical simulation in magnetic materials with random magnetic anisotropy. The magnetization of an assembly of magnetically interacting grains with randomly oriented uniaxial anisotropy was calculated using the Landau-Lifshitz-Gilbert equation. We supposed a single spin model where the magnetizations in a grain were aligned in the same direction, for simplicity. Calculations were carried out for an N×N×N system, where the number of grains on a side, N ranged from 16 to 128. The relation between the coercive forces H{sub C} and the grain size D is represented by H{sub C}∝D{sup k}. With the increase of N, k decreased gradually and tended to reach a saturated value around k = 4.5–5, which dose not correspond to the primitive theory of the random anisotropy model where k = 6. The deviation was discussed in terms of the inter-grain interaction, essentially proportional to the inverse of D.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite

We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite SrFe{sub 12−x}Al{sub x}O{sub 19} with x = 0.5 and x = 1.0. We find that the non-magnetic Al{sup 3+} ions preferentially replace Fe{sup 3+} ions at two of the majority spin sites, 2a and 12k, eliminating their positive contribution to the total magnetization causing the saturation magnetization M{sub s} to be reduced as Al concentration x is increased. Our formation probability analysis further provides the explanation for increased magnetic anisotropy field when the fraction of Al is increased. Although Al{sup 3+} ions preferentially occupy the 2a sites at a low temperature, the occupation probability of the 12k site increases with the rise of the temperature. At a typical annealing temperature (>700 °C) Al{sup 3+} ions are much more likely to occupy the 12k site than the 2a site. Although this causes the magnetocrystalline anisotropy K{sub 1} to be reduced slightly, the reduction in M{sub s} is much more significant. Their combined effect causes the anisotropy field H{sub a} to increase as the fraction of Al is increased, consistent with recent experimental measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The electronic structure, crystal fields, and magnetic anisotropy in RECo 5 magnets

The current progress in describing rare-earth-based magnets' electronic structure and magnetic properties is discussed. We use several currently popular electronic structure methods to show the typical values of critical parameters that define the physics of RECo 5 (RE = rare earth atom) materials. The magnetic moments and magnetic anisotropy of 4f atoms are obtained using several approaches, including anisotropic 4f-charge density-constrained DFT and DFT+HI methods. We also suggest the introduction of "penalty" functional for obtaining correct variational total energy in the traditional Hund's rule-constrained DFT-based techniques. The applicability and future extensions are discussed. The proposed combination of methods is potentially suitable for high-throughput computational searches of new rare-earth-containing magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inhomogeneous magnetic ordered state and evolution of magnetic fluctuations in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 revealed by 31 P NMR

SrCo 2 ⁢P 2 with a tetragonal structure is known to be a Stoner-enhanced Pauli paramagnetic metal being nearly ferromagnetic. Recently J. Schmidt et al. [Phys. Rev. B 108, 174415 (2023)] reported that a ferromagnetic ordered state is actually induced by a small Ni substitution for Co of x = 0.02 in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 where an antiferromagnetic ordered phase also appears by further Ni substitution with x = 0.06–0.35. Here, in this work, using nuclear magnetic resonance (NMR) measurements on 31 P nuclei, we have investigated how the magnetic properties change by the Ni substitution in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 from a microscopic point of view, especially focusing on the evolution of magnetic fluctuations with the Ni substitution and the characterization of the magnetically ordered states. The temperature dependencies of the 31 P spin-lattice relaxation rate divided by temperature (1/T 1 ⁢T) and Knight shift (K) for SrCo 2 ⁢P 2 are reasonably explained by a model where a double-peak structure for the density of states near the Fermi energy is assumed. Based on a Korringa ratio analysis using the T 1 and K data, ferromagnetic spin fluctuations are found to dominate in the ferromagnetic Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 as well as the antiferromagnets where no clear antiferromagnetic fluctuations are observed. We also found the distribution of the ordered Co moments in the magnetically ordered states from the analysis of the 31 P-NMR spectra exhibiting a characteristic rectangular-like shape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗