Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC ISLANDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Perturbative Study of Energetic Particle Redistribution by Alfven Eigenmodes in ITER

The modification of particle distributions by magnetohydrodynamic modes is an important topic for magnetically confined plasmas. Low amplitude modes are known to be capable of producing significant modification of injected neutral beam profiles. Flattening of a distribution due to phase mixing in an island or due to portions of phase space becoming stochastic is a process extremely rapid on the time scale of an experiment. In this paper we examine the effect of toroidal Alfven eigenmodes (TAE) and reversed shear Alfven eigenmodes (RSAE) in ITER on alpha particle and injected beam distributions using theoretically predicted mode amplitudes. It is found that for the equilibrium of a hybrid scenario even at ten times the predicted saturation level the modes have negligible effect on these distributions. A strongly reversed shear (or advanced) scenario, having a spectrum of modes that are much more global, is somewhat more susceptible to induced loss due to mode resonance, with alpha particle losses of over one percent with predicted amplitudes and somewhat larger with the assistance of toroidal field ripple. The elevated q profile contributes to stronger TAE (RSAE) drive and more unstable modes. An analysis of the existing mode-particle resonances is carried out to determine which modes are responsible for the profile modification and induced loss. We find that losses are entirely due to resonance with the counter-moving and trapped particle populations, with co-moving passing particles participating in resonances only deep within the plasma and not leading to loss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The locking and unlocking thresholds for tearing modes in a cylindrical tokamak

The locking and unlocking thresholds for tearing modes are in general different. In this work, the physics origin for this difference is illustrated from theory analysis, and a numerical procedure is developed to find both locking and unlocking thresholds. In particular, a new scaling law for the unlocking threshold that is valid in both weak and strong rotation regimes has been derived from the lowest amplitude of the RMP (resonant magnetic perturbation) allowed for the locked-mode solution. Above the unlocking threshold, the criterion for the phase-flip instability is extended to identify the entire locked-mode states. Two different regimes of the RMP amplitude in terms of the accessibility of the locked-mode states have been found. In the first regime, the locked-mode state may or may not be accessible depending on the initial conditions of an evolving island. In the second regime, the locked-mode state can always be reached regardless of the initial conditions of the tearing mode. The lowest RMP amplitude for the second regime is determined to be the mode-locking threshold. The different characteristics of the two regimes above the unlocking threshold reveal the underlying physics for the gap between the locking and unlocking thresholds and provide an explanation for the closely related and widely observed hysteresis phenomena in island evolution during the sweeping process of the RMP amplitude up and down across that threshold gap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of flux transfer events - Are FTEs flux ropes, islands, or surface waves?

A reexamination is conducted of evidence for the suggestion that flux-transfer events (FTEs) are related to a nontime-stationary reconnection process, giving attention to the ways in which combined field and plasma variations imply that FTEs are magnetic flux ropes. Both time-varying single x-line and multiple x-line reconnection are able to disturb the surrounding plasma, generating a signature that mimics the flux rope while lacking its topology. While any localized perturbation of the magnetopause surface can produce such a signature, evidence can be adduced against a surface-wave explanation of FTEs.

Elphic, R. C.↗

Magnetic Fluctuations in the Jovian Magnetosphere

The engine that drives the jovian magnetosphere is the mass added to the Io ion torus, accelerated to corotational velocities by field-aligned currents that couple the Io torus to the jovian ionosphere. The mass of the torus builds up to an amount that the magnetic forces cannot contain and the plasma, first slowly and then more rapidly, drifts outward. Numerous authors have treated this problem based first on the observations of the Pioneer 10 and 11 flybys; then on Voyager 1 and 2, and Ulysses; and finally most recently the Galileo orbiter. The initial observations revealed the now familiar magnetodisk, in which the field above and below the magnetic equator became quite radial in orientation and much less dipolar. The Galileo observations show this transformation to occur on average at 24 R(sub J) and to often be quite abrupt. These observations are consistent with outward transport of magnetized plasma that moves ever faster radially until about 50 R(sub J) on the nightside where the field lines stretch to the breaking point, reconnection occurs, and plasma and field islands are transported down the tail ultimately removing the mass from the magnetosphere that Io had deposited deep in the inner torus. The reconnection process creates empty flux tubes connected to Jupiter that are buoyant and thought to float inward and replace the flux carried out with the torus plasma. As described above, the jovian magnetosphere could very well be in a state of steady laminar circulation, but indeed it is not. The process is very unsteady and the wave levels can be very intense. The existence of these waves in turn can lead to processes that compete with the radial circulation pattern in removing plasma from the system. These waves can scatter particles so that they precipitate into the ionosphere. This process should be important in the Io torus where the atmospheric loss cone is relatively large and becomes less important as the loss cone decreases in size with radial distance. However, the Io torus is relatively quiet compared to the region outside the torus and it is not obvious without studying this scattering carefully whether the loss in the torus or out of the torus is greater and whether it can act rapidly enough to compete with the radial transport of ions to the tail in the life cycle of the mass added at Io. Closer to Io the ion cyclotron waves are most intense and possibly are associated with the losses in the Io flux tube. The waves are also diagnostic of both the Io atmospheric composition and the size and strength of the massloading process.

Russell, Christopher T.↗

Fermilab Muon Ring Arrives to a Large Crowd of Fans

A very large group of people gathered to watch the muon g-2 ring on its last leg of the big move from Brookhaven National Laboratory in Long Island, NY to Fermilab in Batavia, IL.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The magnetic topology of the plasmoid flux rope in a MHD-simulation of magnetotail reconnection

On the basis of a 3D MHD simulation, the magnetic topology of a plasmoid that forms by a localized reconnection process in a magnetotail configuration (including a net dawn-dusk magnetic field component B sub y N is discussed. As a consequence of B sub y N not equalling 0, the plasmoid assumes a helical flux rope structure rather than an isolated island or bubble structure. Initially all field lines of the plasmoid flux rope remain connected with the earth, while at later times a gradually increasing amount of flux tubes becomes separated, connecting to either the distant boundary or to the flank boundaries. In this stage, topologically different flux tubes become tangled and wrapped around each other, consistent with predictions on the basis of an ad hoc plasmoid model.

Birn, J.↗

Phase diagram for magnetic reconnection in heliophysical, astrophysical, and laboratory plasmas

Recent progress in understanding the physics of magnetic reconnection is conveniently summarized in terms of a phase diagram which organizes the essential dynamics for a wide variety of applications in heliophysics, laboratory, and astrophysics. The two key dimensionless parameters are the Lundquist number and the macrosopic system size in units of the ion sound gyroradius. In addition to the conventional single X-line collisional and collisionless phases, multiple X-line reconnection phases arise due to the presence of the plasmoid instability either in collisional and collisionless current sheets. In particular, there exists a unique phase termed ''multiple X-line hybrid phase'' where a hierarchy of collisional islands or plasmoids is terminated by a collisionless current sheet, resulting in a rapid coupling between the macroscopic and kinetic scales and a mixture of collisional and collisionless dynamics. The new phases involving multiple X-lines and collisionless physics may be important for the emerging applications of magnetic reconnection to accelerate charged particles beyond their thermal speeds. A large number of heliophysical and astrophysical plasmas are surveyed and grouped in the phase diagram: Earth's magnetosphere, solar plasmas (chromosphere, corona, wind, and tachocline), galactic plasmas (molecular clouds, interstellar media, accretion disks and their coronae, Crab nebula, Sgr A*, gamma ray bursts, and magnetars), and extragalactic plasmas (active galactic nuclei disks and their coronae, galaxy clusters, radio lobes, and extragalactic jets). Significance of laboratory experiments, including a next generation reconnection experiment, is also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Overview of the recent experimental research on the J-TEXT tokamak

The J-TEXT capability is enhanced compared to two years ago with several upgrades of its diagnostics and the increase of electron cyclotron resonance heating (ECRH) power to 1 MW. With the application of electron cyclotron wave (ECW), the ECW assisted plasma startup is achieved; the tearing mode is suppressed; the toroidal injection of 300 kW ECW drives around 24 kA current; fast electrons are generated with toroidal injected ECW and the runaway current conversion efficiency increases with ECRH power. The mode coupling between 2/1 and 3/1 modes are extensively studied. The coupled 2/1 and 3/1 modes usually lead to major disruption. Their coupling can be either suppressed or avoided by external resonant magnetic perturbation fields and hence avoids the major disruption. It is also found that the 2/1 threshold of external field is significantly reduced by a pre-excited 3/1 mode, which can be either a locked island or an external kink mode. The disruption control is studied by developing prediction methods capable of cross tokamak application and by new mitigation methods, such as the biased electrode or electromagnetic pellet injector. The high-density operation and related disruptions are studied from various aspects. Approaching the density limit, the collapse of the edge shear layer is observed and such collapse can be prevented by applying edge biasing, leading to an increased density limit. The density limit is also observed to increase, if the plasma is operated in the poloidal divertor configuration or the plasma purity is increased by increasing the pre-filled gas pressure or ECRH power during the start-up phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initial results from the hotspot detection scheme for protection of plasma facing components in Wendelstein 7-X

One of the main aims of Wendelstein 7-X (W7-X), an advanced stellarator, is to investigate the quasi-steady state operation of magnetic confinement devices for nuclear fusion, for which power exhaust is an important issue. A dominant fraction of the energy leaving from the confined plasma region will be removed by 10 so-called island divertor units, which are designed to sustain a maximum heat flux of up to 10 MWm –2 . An essential prerequisite for the safe operation of a steady-state device is automatic detection of hot spots and other abnormal events. Simple temperature limits in infrared (IR) thermographic images will not be enough on their own, because of plasma-generated surface coatings and other effects summarized in the following. To protect divertor elements from overheating, and to monitor power deposition onto the divertor elements, near real-time hotspot detection algorithms for the analysis of carbon plasma facing components (PFCs) were implemented and tested in the GLADIS facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-linear theory of forced magnetic reconnection for the transition from the linear to the Rutherford regime

Abstract Using the in-viscid two-field reduced magneto-hydrodynamic (MHD) model, a new analytical theory is developed to unify the Hahm–Kulsrud–Taylor (HKT) linear solution and the Rutherford quasi-linear regime. Adopting a quasi-linear approach, we obtain a closed system of equations for plasma response in the Taylor problem. An integral form of an analytical solution is obtained for the forced magnetic reconnection, uniformly valid throughout the entire regimes from the HKT linear solution to the Rutherford quasi-linear solution. In particular, the quasi-linear effect can be described by a single coefficient K s ∝ S 8 / 5 ψ c 2 , where S = τ R τ A and ψ c are the Lundquist number and amplitude of external magnetic perturbation, respectively. The HKT linear solution for the response can be recovered when the index K s → 0. On the other hand, the quasi-linear effect plays a key role in the island growth when K s ~ 1. Our new analytical solution has also been compared with reduced MHD simulations with agreement.

Physics↗

The ITER 3D Magnetic Diagnostic Response to Applied n=3 and n=4 RMP's

The ITER magnetic diagnostic response to applied n=3 and n=4 RMPs has been calculated for the 15MA scenario. The VMEC code was utilized to calculate free boundary 3D ideal MHD equilibria, where the non-stellarator symmetric terms were included in the calculation. This allows an assessment to be made of the possible boundary displacements due to RMP application in ITER. As the VMEC code assumes a continuous set of nested flux surface, the possibility of island and stochastic region formation is ignored. At the start of the current at-top (L-Mode) application of n = 4 RMP's indicates approximately 1 cm peak-to-peak displacements on the low field side of the plasma while later in the shot (H-mode) perturbations as large as 3 cm are present. Forward modeling of the ITER magnetic diagnostics indicates significant non-axisymmetric plasma response, exceeding 10% the axisymmetric signal in many of the flux loops. Magnetic field probes seem to indicate a greater robustness to 3D effects but still indicate large sensitivities to 3D effects in a number of sensors. Forward modeling of the diagnostics response to 3D equilibria allows assessment of diagnostics design and control scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dissipation measures in weakly collisional plasmas

ABSTRACT The physical foundations of the dissipation of energy and the associated heating in weakly collisional plasmas are poorly understood. Here, we compare and contrast several measures that have been used to characterize energy dissipation and kinetic-scale conversion in plasmas by means of a suite of kinetic numerical simulations describing both magnetic reconnection and decaying plasma turbulence. We adopt three different numerical codes that can also include interparticle collisions: the fully kinetic particle-in-cell vpic, the fully kinetic continuum Gkeyll, and the Eulerian Hybrid Vlasov–Maxwell (HVM) code. We differentiate between (i) four energy-based parameters, whose definition is related to energy transfer in a fluid description of a plasma, and (ii) four distribution function-based parameters, requiring knowledge of the particle velocity distribution function. There is an overall agreement between the dissipation measures obtained in the PIC and continuum reconnection simulations, with slight differences due to the presence/absence of secondary islands in the two simulations. There are also many qualitative similarities between the signatures in the reconnection simulations and the self-consistent current sheets that form in turbulence, although the latter exhibits significant variations compared to the reconnection results. All the parameters confirm that dissipation occurs close to regions of intense magnetic stresses, thus exhibiting local correlation. The distribution function-based measures show a broader width compared to energy-based proxies, suggesting that energy transfer is co-localized at coherent structures, but can affect the particle distribution function in wider regions. The effect of interparticle collisions on these parameters is finally discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Oxygen surfactant-assisted growth and dewetting of Co films on O-3 × 3/W(111)

Following the cyclic heating in oxygen and annealing, an oxygen-induced 3 × 3 reconstruction was found on the W(111) surface. The growth, crystalline structure, thermal stability, and magnetism of Co ultrathin films deposited on the O-3 × 3/W(111) surface were investigated. The Auger signal of the oxygen was always observable and nearly invariant after either Co deposition or annealing, indicating the role of the surfactant played by oxygen. Auger electron spectroscopy and scanning tunneling microscopy measurements revealed the 2-dimensional growth of Co on O-3 × 3/W(111). Following the annealing procedures, the surfactant oxygen was always observed to float on the film surface while the Co film transformed to 3-dimensional islands with a wetting layer. In contrast to the thermodynamically stable wetting layer of 1 physical monolayer (PML) Co on clean W(111) between 700 and 1000 K, the oxygen surfactant led to a reduction of the wetting layer to ≈1/3 PML after thermal annealing. The 6 and 9.6 PML Co/O-3 × 3/W(111) revealed a stable in-plane magnetic anisotropy. A 6-fold symmetry corresponding to the crystalline structure was observed in the in-plane angle-dependent magneto-optical Kerr effect measurement.

36 MATERIALS SCIENCE↗

Nonreciprocal Supercurrents in a Field-Free Graphene Josephson Triode

Superconducting diodes are proposed non-reciprocal circuit elements that should exhibit nondissipative transport in one direction while being resistive in the opposite direction. Multiple examples of such devices have emerged in the past couple of years, however their efficiency is typically limited, and most of them require magnetic field to function. Here we present a device achieving efficiencies upwards of 90% while operating at zero field. Our samples consist of a network of three graphene Josephson junctions linked by a common superconducting island, to which we refer as a Josephson triode. The triode is tuned by applying a control current to one of the contacts, thereby breaking the time-reversal symmetry of the current flow. The triode’s utility is demonstrated by rectifying a small (tens of nA amplitude) applied square wave. Finally, we speculate that devices of this type could be realistically employed in the modern quantum circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2010 Neutron Review: ORNL Neutron Sciences Progress Report

During 2010, the Neutron Sciences Directorate focused on producing world-class science, while supporting the needs of the scientific community. As the instrument, sample environment, and data analysis tools at High Flux Isotope Reactor (HFIR ) and Spallation Neutron Source (SNS) have grown over the last year, so has promising neutron scattering research. This was an exciting year in science, technology, and operations. Some topics discussed are: (1) HFIR and SNS Experiments Take Gordon Battelle Awards for Scientific Discovery - Battelle Memorial Institute presented the inaugural Gordon Battelle Prizes for scientific discovery and technology impact in 2010. Battelle awards the prizes to recognize the most significant advancements at national laboratories that it manages or co-manages. (2) Discovery of Element 117 - As part of an international team of scientists from Russia and the United States, HFIR staff played a pivotal role in the discovery by generating the berkelium used to produce the new element. A total of six atoms of ''ununseptium'' were detected in a two-year campaign employing HFIR and the Radiochemical Engineering Development Center at Oak Ridge National Laboratory (ORNL) and the heavy-ion accelerator capabilities at the Joint Institute for Nuclear Research in Dubna, Russia. The discovery of the new element expands the understanding of the properties of nuclei at extreme numbers of protons and neutrons. The production of a new element and observation of 11 new heaviest isotopes demonstrate the increased stability of super-heavy elements with increasing neutron numbers and provide the strongest evidence to date for the existence of an island of enhanced stability for super-heavy elements. (3) Studies of Iron-Based High-Temperature Superconductors - ORNL applied its distinctive capabilities in neutron scattering, chemistry, physics, and computation to detailed studies of the magnetic excitations of iron-based superconductors (iron pnictides and chalcogenides), a class of materials discovered in 2008. This research is yielding new insights into the relationship between magnetism and superconductivity and has established several key features of this family of high-temperature superconducting (HTS ) materials: the maximum magnetic field at which they can function, the nature of the electrons involved in the superconductivity, the dependence of the properties upon chemical substitution, and the character of the magnetic fluctuations in the material. The results suggest that despite important differences between these materials and the HTS copper oxides, a universal mechanism may be responsible for the unconventional superconductivity. (4) Coal Sequestration Research: A New Home for Greenhouse Gases - One possibility for slowing down the increasing levels of carbon dioxide (CO{sub 2}) in the atmosphere is to capture the gas in natural underground features such as coal seams. Critical to the feasibility of this technology is determining how much CO{sub 2} can be stored, no method for which has been found - until now. (5) Accelerator Reliability Passes 92% - In December 2010, SNS set a new record for itself when the accelerator ran at 1 MW with 100% reliability. Target Performance Exceeds All Expectations - The mercury target used at SNS is the first of its kind. During the design and planning for SNS, many people were skeptical that the target would work. In 2010, it was confirmed that the target was working not only well but much better than anyone would have imagined. (6) Changing the World of Data Acquisition - Researchers at SNS are starting to benefit from event-based data analysis. Event data mode captures and stores an individual data set for every single neutron that strikes a detector - precisely when and where the neutron is detected. This technique provides numerous advantages over traditional methods. Event data mode allows researchers to process their data at the highest resolution possible with no loss of data. This method of data collection provides a much more efficient way for users to gather data and get the most from their beam time. (7) New Laboratories for Users - The HFIR and SNS user communities continue to grow dramatically. In 2010, HFIR hosted 862 users and SNS 796, outpacing projections for both facilities. To meet the needs of those users, a new complex of 13 laboratories is now open for users at SNS. (8) Innovative Detectors Provide Relief from Helium-3 Shortage - Helium-3 ({sup 3}He) has been the gas of choice for gaseous detectors since the early days of neutron science. About two years ago, detector scientists worldwide faced the reality that stockpiles of {sup 3}He are dwindling rapidly, while demand for it has risen by a factor of five. The Neutron Sciences Detectors Group has developed two new types of detectors that don't rely on {sup 3}He: the Anger camera and the wavelength shifting fiber neutron detector, both of which use lithium ({sup 6}Li).

High Flux isotope reactor↗

THE COMPLEX STRUCTURE OF MAGNETIC FIELD DISCONTINUITIES IN THE TURBULENT SOLAR WIND

Using high-resolution Cluster satellite observations and a multi-dimensional intermittency technique, we show that the magnetic discontinuities in the turbulent solar wind are connected through the spatial scales, going from proton down to electron scales. In some circumstances, their structure resembles the Harris equilibrium profile in plasmas. Observations are consistent with a scenario where many current layers develop in turbulence and where the outflow of these reconnection events are characterized by complex sub-proton networks of secondary islands, in a self-similar way. Although in the past these pictures have been speculated to be separately ubiquitous, through theories and simulations, the present work confirms that “reconnection in turbulence” and “turbulent reconnection” coexist in space plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Project Centaur

The National Aeronautics and Space Administration (NASA) and the Canada Centre for Space Science, National Research Council of Canada (NRCC), conducted a cooperative sounding rocket campaign in the Canadian Arctic during November/December 1981. The objective of the campaign was to investigate the earth's dayside magnetic cleft region. The project was named CENTAUR for Cleft Energetics Transport and Ultraviolet Radiation. Remote launch support facilities were established at Cape Parry, NWT, Canada (70 deg 10 min N latitude, 124 deg 40 min W longitude). The cleft region is accessible from this location when launched poleward during reasonably quiet magnetic activity. Five large sounding rockets were launched (3 NASA, 2 NRCC). About 30 scientific experiments were launched, and an extensive array of ground based experiments was established at Cape Parry and at Sachs Harbour, Banks Island, 130 miles poleward. This paper discusses the unique organization, planning, facilities, instrumentation, and operation required to support the campaign, and looks briefly at the results.

Brence, W. A.↗

Interaction transfer of silicon atoms forming Co silicide for Co/√(3)×√(3)R30°-Ag/Si(111) and related magnetic properties

Combined scanning tunneling microscopy, Auger electron spectroscopy, and surface magneto-optic Kerr effect studies were employed to study the microscopic structures and magnetic properties for ultrathin Co/√(3)×√(3)R30°-Ag/Si(111). As the annealing temperature increases, the upward diffusion of Si atoms and formation of Co silicides occurs at temperature above 400 K. Below 600 K, the √(3)×√(3)R30°-Ag/Si(111) surface structure persists. We propose an interaction transferring mechanism of Si atoms across the √(3)×√(3)R30°-Ag layer. The upward transferred Si atoms react with Co atoms to form Co silicide. The step height across the edge of the island, a separation of 0.75 nm from the analysis of the 2 × 2 structure, and the calculations of the normalized Auger signal serve as strong evidences for the formation of CoSi{sub 2} at the interface. The interaction transferring mechanism for Si atoms enhances the possibility of interactions between Co and Si atoms. The smoothness of the surface is advantage for that the easy axis of magnetization for Co/√(3)×√(3)R30°-Ag/Si(111) is in the surface plane. This provides a possible way of growing flat magnetic layers on silicon substrate with controllable silicide formation and shows potential applications in spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗