Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Spatial frequency response of an optical heterodyne receiver

The principles of transfer function analysis are applied to a passive optical heterodyne receiver to obtain the modulation transfer function (MTF). MTF calculations are performed based on an optical platform which is imaging vertically varying profiles at worst case shuttle orbit altitudes. An analysis of the derogatory effects of sampling (aliasing) and central obscurations on both resolution and heterodyne efficiency is given. It is found that the cascading property of MTF analysis must be carefully applied since the coherent transfer function of the optical receiver and that due to the local oscillator-detector combination are not separable but are related by the convolution of their products. Application of these results to the specific case of a space-lab type optical heterodyne receiver shows that resolutions of the order of 1.5-2.0 Km are possible for worst-case type orbital scenarios. Further, comparison of obscured-type receivers (e.g., Cassegrains) with unobscured receivers shows that both resolution and efficiency are severely degraded in an obscured-type receiver and consequently should not be used for a passive heterodyne detection scheme.

Fales, C. L.↗

Development of advanced avionics systems applicable to terminal-configured vehicles

A technique to add the time constraint to the automatic descent feature of the existing L-1011 aircraft Flight Management System (FMS) was developed. Software modifications were incorporated in the FMS computer program and the results checked by lab simulation and on a series of eleven test flights. An arrival time dispersion (2 sigma) of 19 seconds was achieved. The 4 D descent technique can be integrated with the time-based metering method of air traffic control. Substantial reductions in delays at today's busy airports should result.

Heimbold, R. L.↗

Holographic flow visualization at NASA Langley

Holographic flow visualization systems at two NASA Langley facilities, a hypersonic blow-down tunnel using CF4 gas and an expansion tube with very short test time, are described. A pulsed ruby laser is used at a CF4 tunnel for single pulse holography, double pulse with several minutes between exposures, and dual plate holographic interferometry. Shadowgraph, schlieren, and interferograms are reconstructed from the holograms in a separate reconstruction lab. At the expansion tube the short run time of 200 microseconds requires precise triggering of its double pulsed ruby laser. With double pulse capability of 20 to 1200 microseconds pulse separation, one pulse can occur before and one later after flow is established to obtain fringe free background interferograms (perfect infinite fringe) or both pulses can occur during flow in order to study flow instabilities. Holograms are reconstructed at the expansion tube with an in-place setup which makes use of a high power CW Argon laser and common optics for both recording and reconstructing the holograms. The holographic systems at the CF4 tunnel and expansion tube are operated routinely for flow visualization by tunnel technicians. Typical flow visualization photographs from both facilities are presented.

Burner, A. W.↗

Experiments with diamond-turned metal X-ray mirrors

It is noted that the primary advantages of diamond turning technology for the fabrication of X-ray telescope mirrors is in the smoothness of the finished surface and the control of the position of the cutter afforded by the precision slides and computer-assisted positioners which form the surface. The paper summarizes the Caltech work in attempting to make Wolter Type I telescope mirrors using the diamond turning facilities at the Oak Ridge Y-12 laboratory. Attention is given to such factors as the use of aluminum with copper plating and electroless nickel coating. It is found that although the diamond turning capability of the Y-12 lab is capable of making good X-ray mirror contours, there are problems in the process which have limited the accuracy achieved by this technique.

Garmire, G. P.↗

Environmental Exposure Effects on Composite Materials for Commercial Aircraft

This period's activities were highlighted by continued long term and accelerated lab exposure testing, and by completion of all fabrication tasks on the optional material systems, AS1/3501-6 and Kevlar 49/F161-188. Initial baseline testing was performed on the two optional material systems. Long term exposure specimens were returned from three of the four ground rack sites and from two of the three aircraft locations. Test data from specimens returned from Dryden after 2 years exposure do not indicate continuing trends of strength reduction from the 1 year data. Test data from specimens returned from the Wellington, new Zealand ground rack and on Air New Zealand aircraft after 1 year exposure show strength changes fairly typical of other locations.

Hoffman, D. J.↗

Preparation and characterization of electrodes for the NASA Redox storage system

Electrodes for the Redox energy storage system based on iron and chromium chloride reactants is discussed. The physical properties of several lots of felt were determined. Procedures were developed for evaluating electrode performance in lab scale cells. Experimental procedures for evaluating electrodes by cyclic voltammetry are described which minimize the IR losses due to the high internal resistance in the felt (distributed resistance). Methods to prepare electrodes which reduced the coevolution of hydrogen at the chromium electrode and eleminate the drop in voltage on discharge occasionally seen with previous electrodes were discussed. Single cells of 0.3329 ft area with improved membranes and electrodes are operating at over 80% voltage efficiency and coulombic efficiencies of over 98% at current densities of 16 to 20 amp % ft.

Reid, M. A.↗

Toward defining good writing: A rhetorical analysis of the words, sentences, and paragraphs in 16 industrial scripts

The assumption that teachers of technical writing agree on a definition of good writing was found to be without basis. Resolution of disagreements arising from close reading and textual analysis is described. Writing samples from corporate sources including IBM, ALCOA, Exxon, Weyerhaeuser, Bell Labs, Underwriters Laboratories, Dow Chemical, and US Steel were requested. A mixture of informative and persuasive examples, and examples directed at lay and specialist audiences were received. Analyses of 16 writing samples are reported. Analysis of word level, sentence level, and paragraph level, was completed. Syllabism, verb selection, nominalizations, vocabulary choices, t-units, subordination, sentence and clause length, syntactic order, patterns, development, topic sentences, propositional order, and transitions were analyzed.

Freisinger, R. R.↗

Structural Assembly Demonstration Experiment (SADE) experiment design

The Structural Assembly Demonstration Experiment concept is to erect a hybrid deployed/assembled structure as an early space experiment in large space structures technology. The basic objectives can be broken down into three generic areas: (1) by performing assembly tasks both in space and in neutral buoyancy simulation, a mathematical basis will be found for the validity conditions of neutral buoyancy, thus enhancing the utility of water as a medium for simulation of weightlessness; (2) a data base will be established describing the capabilities and limitations of EVA crewmembers, including effects of such things as hardware size and crew restraints; and (3) experience of the M.I.T. Space Systems Lab in neutral buoyancy simulation of large space structures assembly indicates that the assembly procedure may create the largest loads that a structure will experience during its lifetime. Data obtained from the experiment will help establish an accurate loading model to aid designers of future space structures.

Akin, D. L.↗

A high order approach to flight software development and testing

The use of a software development facility is discussed as a means of producing a reliable and maintainable ECS software system, and as a means of providing efficient use of the ECS hardware test facility. Principles applied to software design are given, including modularity, abstraction, hiding, and uniformity. The general objectives of each phase of the software life cycle are also given, including testing, maintenance, code development, and requirement specifications. Software development facility tools are summarized, and tool deficiencies recognized in the code development and testing phases are considered. Due to limited lab resources, the functional simulation capabilities may be indispensable in the testing phase.

Steinbacher, J.↗

Restructuring the US telecommunications industry - Impact on innovation

The Communications Act of 1934, which regulates the United States telecommunications industry, is becoming less able to deal with the changes brought by modern technology. Therefore, proposals are being made to restructure the industry. Breaking up AT&T into smaller firms would have only minor effects, since its ratio of R and D to sales has been near the median for large telephone companies. Restructuring AT&T into subsidiaries dealing at arms' length might cause a reordering of priorities toward more directly marketable and useful products, but too extensive a break-up could endanger Bell Labs' commitment to basic research. Regulation leads a firm to ignore true social value of possible products, expand into low profit markets, and favor capital-intensive over labor-intensive innovation. If regulatory lag occurs, a firm will produce cost-reducing innovation in order to increase its profit.

Agnew, C. E.↗

Lithospheric thinning associated with rifting in East Africa

The rate of ascent of the thermal perturbation of eruptive rock types in the Kenya Dome region can be calculated for depths of origin ranging from greater than 170 km to the lower crust (25-30 km) as combined with dated occurrences. An equation is derived and solved iteratively for ascent velocity at 10 km depth intervals from 150-30 km, assuming a thermal diffusivity of 1 sq mm/sec. For radii of 50 and 100 km and constant gradient increases within the range 55-60 C/km over the lithosphere-asthenosphere boundary (LAB) ascent depth range, the calculated rate of upwelling corresponds well with the results of a simple thermal model of lithospheric thinning. A 1 C/km change in gradient results approximately in a 0.55 Myr change in ascent time from 150 to 30 km, due to the increasing differential between the geotherm and the solidus with decreasing depths and the increasing rate of heat loss to the surface. It is suggested by the temporal-spatial-compositional relations of eruptives in the Kenya Dome region that there is a shallowing of magma source regions with time, implying encroachment of a thermal anomaly.

Wendlandt, R. F.↗

Coal desulfurization by chlorinolysis production and combustion test evaluation of product coals

Laboratory-scale screening tests were carried out on coal from Harrison County, Ohio to establish chlorination and hydrodesulfurization conditions for the batch reactor production of chlorinolysis and chlorinolysis-hydrodesulfurized coals. In addition, three bituminous coals, were treated on the lab scale by the chlorinolysis process to provide 39 to 62% desulfurization. Two bituminous coals and one subbituminous coal were then produced in 11 to 15 pound lots as chlorinolysis and hydrodesulfurized coals. The chlorinolysis coals had a desulfurization of 29-69%, reductions in voltatiles and hydrogen. Hydrodesulfurization provided a much greater desulfurization (56-86%), reductions in volatiles and hydrogen. The three coals were combustion tested in the Penn State ""plane flame furnace'' to determine ignition and burning characteristics. All three coals burned well to completion as: raw coals, chlorinolysis processed coals, and hydrodesulfurized coals. The hydrodesulfurized coals experienced greater ignition delays and reduced burning rates than the other coals because of the reduced volatile content. It is thought that the increased open pore volume in the desulfurized-devolatilized coals compensates in part for the decreased volatiles effect on ignition and burning.

Kalvinskas, J. J.↗

Development and evaluation of polyvinyl-alcohol blend polymer films as battery separators

Several dialdehydes and epoxies were evaluated for their suitability as cross-linkers. Optium concentrations of several cross-linking reagents were determined. A two-step method of cross-linking, which involves treatment of the film in an acid or acid periodate bath, was investigated and dropped in favor of a one-step method in which the acid catalyst, which initiates cross-linking, is added to the PVA - cross-linker solution before casting. The cross-linking was thus achieved during the drying step. This one-step method was much more adaptable to commercial processing. Cross-linked films were characterized as alkaline battery separators. Films were prepared in the lab and tested in cells in order to evaluate the effect of film composition and a number of processing parameters on cell performance. These tests were conducted in order to provide a broader data base from which to select optimum processing parameters. Results of the separator screening tests and the cell tests are discussed.

Manzo, M. A.↗

Defects and annealing studies in 1-Me electron irradiated (AlGa)As-GaAs solar cells

The deep-level defects and recombination mechanisms in the one-MeV electron irradiated (AlGa)As-GaAs solar cells under various irradiation and annealing conditions are discussed. Deep-level transient spectroscopy (DLTS) and capacitance-voltage (CV) techniques were used to determine the defect and recombination parameters such as energy levels and defect density, carrier capture cross sections and lifetimes for both electron and hole traps as well as hole diffusion lengths in these electron irradiated GaAs solar cells. GaAs solar cells used in this study were prepared by the infinite solution melt liquid phase epitaxial (LPE) technique at Hughes Research Lab., with (Al0.9Ga0.1)-As window layer, Be-diffused p-GaAs layer on Sn-doped n-GaAs or undoped n-GaAs active layer grown on n(+)-GaAs substrate. Mesa structure with area of 5.86x1000 sq cm was fabricated. Three different irradiation and annealing experiments were performed on these solar cells.

Li, S. S.↗

Skeletal and body composition evaluation

Research on radiation detectors for absorptiometry; analysis of errors affective single photon absorptiometry and development of instrumentation; analysis of errors affecting dual photon absorptiometry and development of instrumentation; comparison of skeletal measurements with other techniques; cooperation with NASA projects for skeletal evaluation in spaceflight (Experiment MO-78) and in laboratory studies with immobilized animals; studies of postmenopausal osteoporosis; organization of scientific meetings and workshops on absorptiometric measurement; and development of instrumentation for measurement of fluid shifts in the human body were performed. Instrumentation was developed that allows accurate and precise (2% error) measurements of mineral content in compact and trabecular bone and of the total skeleton. Instrumentation was also developed to measure fluid shifts in the extremities. Radiation exposure with those procedures is low (2-10 MREM). One hundred seventy three technical reports and one hundred and four published papers of studies from the University of Wisconsin Bone Mineral Lab are listed.

Mazess, R. B.↗

GOES satellite time code dissemination

The GOES time code system, the performance achieved to date, and some potential improvements in the future are discussed. The disseminated time code is originated from a triply redundant set of atomic standards, time code generators and related equipment maintained by NBS at NOAA's Wallops Island, VA satellite control facility. It is relayed by two GOES satellites located at 75 W and 135 W longitude on a continuous basis to users within North and South America (with overlapping coverage) and well out into the Atlantic and Pacific ocean areas. Downlink frequencies are near 468 MHz. The signals from both satellites are monitored and controlled from the NBS labs at Boulder, CO with additional monitoring input from geographically separated receivers in Washington, D.C. and Hawaii. Performance experience with the received time codes for periods ranging from several years to one day is discussed. Results are also presented for simultaneous, common-view reception by co-located receivers and by receivers separated by several thousand kilometers.

Beehler, R. E.↗

Spacelab ground processing

During the Kennedy Space Center ground processing of Spacelab systems, emphasis is placed on verification of physical and functional interfaces aboard the spacecraft. Experiment-related operations consist of the integration of various experiment elements into the flight module. After Spacelab-Space Shuttle interfaces have been verified, the Spacelab cargo is transferred to the Orbiter Processing Facility in a controlled environment. Attention is given to the integrity of all payload-to-Space Shuttle interfaces during final closeout operations. Payload-related activities are minimal at the launch pad stage, since only limited access to the payload module is available through the Space lab Transfer Tunnel.

Scully, E. J.↗

Electron-impact excitation of the Cameron system (a(3)pi yields x(1) Sigma) transition of CO

The results of experimental observations of the Cameron bands of CO produced by electron impacts with CO and CO2 are presented, noting that the bands have been detected in the atmospheres of both Mars and Venus. The study was initiated to account for Conway's (1981) data that the Martian airglow displayed cross-sectional dissociative excitation of the Cameron bands seven time larger than laboratory measurements by Ajello (1971). Spectrometer measurements were obtained of processes occurring in a chamber filled with CO or CO2 gas being bombarded by an electron beam. A value three times higher than the previous lab oratory estimate was obtained. Reasons for the discrepancy are discussed, including a present factor of two error in laboratory estimates.

Erdman, P. W.↗