Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inspires”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nonunitary Variational Quantum Eigensolver with the Localized Active Space Method and Cost Mitigation

Accurately describing strongly correlated systems with affordable quantum resources remains a central challenge for quantum chemistry applications on near and intermediate term quantum computers. The localized active space self-consistent field (LASSCF) approximates the complete active space self-consistent field (CASSCF) by generating active space-based wave functions within specific fragments while treating interfragment correlation with mean-field approach, hence is computationally less expensive. Hardware-efficient ansatzes (HEA) offer affordable and shallower circuits, yet they often fail to capture the necessary correlation. Previously, Jastrow-factor-inspired nonunitary qubit operators were proposed to use with HEA for variational quantum eigensolver (VQE) calculations (so-called nuVQE), as they do not increase circuit depths and recover correlation beyond the mean-field level for Hartree–Fock initial states. Here, in this study, we explore running nuVQE with LASSCF as the initial state. The method, named LAS-nuVQE, is shown to recover interfragment correlations, reach chemical accuracy with a small number of gates (<70) in both H 4 and square cyclobutadiene (C 4 H 4 ), and produces more accurate energetics than its HEA counterparts at all circuit depths. To further address the inherent symmetry-breaking in HEA, we implemented spin-constrained LAS-nuVQE to extend the capabilities of HEA further and show spin-pure results for square cyclobutadiene. We also mitigate the increased measurement overhead of nuVQE via Pauli grouping and shot-frugal sampling, reducing measurement costs by up to 2 orders of magnitude compared to ungrouped operator, and show that one can achieve better accuracy with a small number of shots (10 3–4 ) per one expectation value calculation compared to noiseless simulations with one or two orders of magnitude more shots. Finally, wall clock time estimates show that, with our measurement mitigation protocols, nuVQE becomes a cheaper and more accurate alternative than vanilla VQE with HEA. Taken together, these developments illustrate a practical pathway toward performing multireference chemical simulations with accuracy and affordable resources on today’s quantum hardware, achieving both accuracy and affordability in challenging correlated systems.

Wang, Qiaohong [Univ. of Chicago, IL (United State↗
DOE OSTI2025

Evolution of Structure and Magnetism in FeCl 2 and FeCl 3 : From Clusters to Monolayers

In this work, we address one of the most fundamental questions in cluster science─how do the structure and properties evolve from clusters to crystals? Using density functional theory (DFT), we focus our study on the evolution of structure and magnetism in iron-chloride systems, from clusters to monolayers. The choice of this system is motivated by the recent experimental confirmation of one of the author’s earlier theoretical prediction that the FeCl 2 cluster is magnetic with a spin magnetic moment of 4 μ B localized at the Fe site, while its dimer, Fe 2 Cl 4 , is antiferromagnetic. Similarly, FeCl 3 cluster is magnetic with a total spin magnetic moment of 5 μ B , with 4 μ B localized at the Fe site and 1 μ B distributed over the Cl sites. The dimer clusters Fe 2 Cl 4 and Fe 2 Cl 6 have an antiferromagnetic ground state, and upon Li-functionalization, both can be magnetically transformed from antiferromagnetic to ferromagnetic states. In contrast, FeCl 2 and FeCl 3 monolayers exhibit different magnetic ground states in their periodic forms: FeCl 2 is ferromagnetic (FM), but in FeCl 3 , the antiferromagnetic (AFM) and FM states are energetically nearly degenerate. Such a difference arises due to the different chemical coordination of the Fe atoms with the Cl atoms, caused by their different oxidation states, which is +2 in FeCl 2 and +3 in FeCl 3 , respectively. Interestingly, Li-functionalization allows both FeCl 3 and FeCl 2 monolayers to be ferromagnetic. Our study highlights that several, but not all, electronic and magnetic characteristics of isolated clusters are preserved in the extended periodic structures. This systematic investigation of iron-halide clusters is expected to inspire further experimental and theoretical exploration into the magnetism of other transition metal halides.

cluster chemistry↗
DOE OSTI2025

QM Investigation of Rare Earth Ion Interactions with First Hydration Shell Waters and Protein-Based Coordination Models

Here, conventional methods for extracting rare earth metals (REMs) from mined mineral ores are inefficient, expensive, and environmentally damaging. Recent discovery of lanmodulin (LanM), a protein that coordinates REMs with high-affinity and selectivity over competing ions, provides inspiration for new REM refinement methods. Here, we used quantum mechanical (QM) methods to investigate trivalent lanthanide cation (Ln 3+ ) interactions with coordination systems representing bulk solvent water and protein binding sites. Energy decomposition analysis (EDA) showed differences in the energetic components of Ln 3+ interaction with representatives of solvent (water, H 2 O) and protein binding sites (acetate, CH 3 COO – ), highlighting the importance of accurate description of electrostatics and polarization in computational modeling of REM interactions with biological and bioinspired molecules. Relative binding free energies were obtained for Ln 3+ with coordination complexes originating from binding sites in PDB structures of a lanthanum binding peptide (PDB entry 7CCO) and LanM, with explicit consideration of the first hydration shell waters, according to quasi-chemical theory (QCT). Beyond the first shell, the bulk solvent environment was represented with an implicit continuum model. Ln 3+ interactions with (H 2 O) 9 and both binding site models became more favorable, moving down the periodic series. This trend was more pronounced with the protein binding site models than with water, resulting in affinity increasing with periodic number, except for the last REM, Lu 3+ , which bound less favorably than the preceding element, Yb 3+ . Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. Conversely, the previously reported experimental data for LanM show a preference for the earlier lanthanides; this is likely due to longer-range interactions and cooperative effects, which are not represented by the reduced models. Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. In contrast to the previously reported experimental data for LanM, the peptide preferentially binds the earlier lanthanides. This difference likely arises due to longer-range interactions and cooperative effects not represented by the peptide. Further investigation of Ln 3+ interactions with whole proteins using polarizable molecular mechanics models with explicit solvent is warranted to understand the influence of longer-ranged interactions, cooperativity, and bulk solvent. Nevertheless, the present work provides new insights into Ln 3+ interactions with biomolecules and presents an effective computational platform for designing specific single-site REM binding peptides more efficiently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Characterizing Absolute Orientations in DNA Self-Assembly of Single Molecules

DNA self-assembly of single molecules (i.e., dyes) with deterministic orientations is a powerful approach for engineering mo-lecular excitons. However, current determination methods of the dye orientation relative to DNA do not account for the orien-tation of the dye plane, which is a missing degree of freedom needed to define absolute three-dimensional orientations. In this work, we combine fluorescence-detected linear dichroism, defocused dipole imaging, and DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) super-resolution microscopy to determine the absolute three-dimensional orientations of single Cy5 dyes relative to host DNA duplexes which includes the dye plane orientation. The data revealed that the absorption and emission dipoles are perpendicular to the DNA duplex, and the mean dye plane is parallel to the DNA bases, which supports the notion that Cy5 dyes intercalate between DNA base pairs. The presented methodology will inspire the investigation of the dye plane orientation for controlling dye arrangement configurations beyond spontaneous π-stacking between dyes as well as achieving novel dye-DNA arrangements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phase Transition and Liquid-like Superionic Conduction in Ag 2 S

Superionic conductivity in certain polymorphs of Ag 2 S has inspired numerous concepts for materials applications, but the relationship between the structure and the mobility of silver ions remains poorly explored. In this paper, we report ab initio molecular dynamics simulations for low- (acanthite) and high-temperature (argentite) Ag 2 S polymorphs that reveal the dynamical processes, giving rise to the superionic behavior in the latter. Similarities between their sulfur sublattices enable simulations of silver ion diffusivities and pathways on essentially an equal footing. For the higher temperature polymorph, calculated temperature-dependent mean square displacements and activation energies by the nudged elastic band method show good correspondence with expectations from the experiment. In the superionic state, silver atoms diffuse in a liquid-like behavior with no preferred diffusion pathways, within the relatively stable body-centered cubic sulfur framework. Conversely, conduction in acanthite appears to depend more on the mobilities of electronic charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Capacitance of Carbon Nanotube/Graphene Composite Electrodes with [BMIM + ][BF$_4^–$]/Acetonitrile: Fixed Voltage Molecular Dynamics Simulations

The capacitance of nanoporous carbon electrode materials is dictated by the physical interactions with electrolyte ions and molecules at the accessible interior electrode surface. While significant progress has been made in designing and synthesizing carbon materials with well-defined and relatively homogeneous nanoporosity, the majority of materials remain heterogeneous, and the resulting properties reflect an average over this distribution. In this regard, computer simulations can be a valuable tool to predict or validate structure/property relationships by systematically investigating well-defined, model electrode morphologies. In this work, we utilize fixed-voltage molecular dynamics simulations to predict structure/capacitance relationships for five different model morphologies of carbon nanotube/graphene (CNT/G) composite electrodes with 1-butyl-3-methylimidazolium tetrafluoroborate/acetonitrile electrolyte. The CNT/G electrode models are inspired by experimental “layer-by-layer” syntheses and strike a balance between realism and computational tractability. Comparison between different model electrode architectures elucidates important structure/property relationships. We find that CNT/graphene contact points serve as “hot spots” with significantly enhanced charge separation relative to the rest of the electrode. Furthermore, we demonstrate a specific nanoconfinement motif that provides substantial 3–4$\times$ enhancement of local capacitance, resulting in a ~40% increase of the total electrode differential capacitance. Because the accessible surface area of the model CNT/G electrodes is precisely determined, a comparison of per-area capacitance across systems is unambiguous. Our results thus complement a prior computational demonstration of capacitance enhancement in nanoconfinement while elucidating additional interaction motifs at CNT/G electrochemical interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Discovering Dinuclear Dioxygen-Bridged Cobalt(III) Complexes for Selective Binding of O 2 from Air

The design and development of dioxygen activation in porous crystalline materials is a useful avenue for exploring selective adsorption of O 2 that shows significant potential to enable separations of O 2 and N 2 from air. Porous materials featuring redox-active metal centers have received attention regarding selective O 2 adsorption via chemisorption. Drawing inspiration from a dinuclear cobalt material ([(Co(III) 2 (bpbp)O 2 ) 2 bdc](PF 6 ) 4 (CSD code: GAMVIB; bpbp – = 2,6-bis(N,N-bis(2-pyridylmethyl)aminomethyl)-4-tert-butylphenolato; bdc 2– = 1,4-benzenedicarboxylato)) that displays reversible and selective O 2 adsorption, we focus on searching for potential O 2 -selective materials with dinuclear cobalt clusters that have dioxygen-bridged Co(III) complexes. We combine structure screening with a high-level hybrid periodic density functional theory (DFT) workflow to investigate O 2 and N 2 adsorption in materials from validated crystal structure databases (e.g., the CSD database). These calculations identify multiple materials that are predicted to have superior O 2 binding capability relative to GAMVIB. Grand Canonical Monte Carlo (GCMC) simulations based on DFT-developed force fields were performed for selected candidates to estimate the adsorption performance for O 2 /N 2 mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

ReaxFF Reactive Force Field for Exploring Electronically Switchable Polarization in Zn 1– x Mg x O Ferroelectric Semiconductors

Cation misfit in traditional ferroelectric crystals offers a new material platform that can drive electronic components toward structural miniaturization and high-density integration, enabling deviation from von-Neumann architectures. Here, we explore ferroelectricity in Zn 1–x Mg x O, a nontraditional ferroelectric material with tunable properties. Using data from density-functional theory calculations, we have developed a ReaxFF reactive force field to explore the ferroelectric properties of Zn 1–x Mg x O and reveal the hysteresis behavior. We discover that ferroelectric switching can be observed at a critical thickness of 10 nm with a residual polarization of ~100 μC/cm 2 . Our analysis indicates that an increase in Mg-substitution correlates with a decrease in the coercive field. We also observe a strong temperature dependence of the coercive field in Zn 1–x Mg x O, with values decreasing as the temperature increases. Additionally, we find that the distribution of Mg atoms significantly impacts the coercive field, with a clustered distribution leading to a substantial increase. In particular, a decrease in coercive field values is observed when Mg atoms are randomly distributed, compared to uniform distribution. Furthermore, leveraging tunable hysteresis behavior offered by varied percentages and distribution of Mg-substitution provides valuable insights into the design of next-generation functional devices and will inspire further investigations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Leveraging Multiproton-Coupled Electron Transfer to Improve Ir(III) Photocatalyst Efficiency

In photoredox reactions, charge recombination (CR) limits quantum yields, hindering the efficient conversion of light energy into catalytic activity. To address this, we drew inspiration from redox relays in photosystem II (PSII) and developed a new series of iridium(III) complexes featuring covalently attached benzimidazole-phenol-pyridine (BIP-Py) groups to facilitate intramolecular multiproton-coupled electron transfer (MPCET). Herein, we evaluate the effects of MPCET through an extended and well-defined hydrogen-bond network to improve photocatalytic activity and mitigate rapid charge recombination. Infrared spectroelectrochemistry reveals pyridine protonation upon phenol oxidation, while visible spectroelectrochemistry and transient absorption spectroscopy confirm the electro- and photochemical formation of chargeseparated states (CSS) involving oxidized BIP, resulting from intramolecular proton-coupled electron transfer (PCET). The application of the BIP-Py platform in a photocatalytic Nhydroxyphthalimide ester reduction reaction resulted in a ∼106-fold reduction in CR rate and a quantum yield enhancement of up to 157%. Our findings suggest that incorporating MPCET-based redox relays into photocatalyst frameworks is an effective strategy to enhance the efficiency of photocatalytic systems.

Catalysts↗
DOE OSTI2020

A Metastable CaSH 3 Phase Composed of HS Honeycomb Sheets that is Superconducting Under Pressure

Evolutionary searches have predicted a number of ternary Ca–S–H phases that could be synthesized at pressures of 100–300 GPa. P6 3 /mmc CaSH 2 , Pnma CaSH 2 , Cmc2 1 CaSH 6 , and I$\bar{4}$CaSH 20 were composed of a Ca–S lattice along with H 2 molecules coordinated in a “side-on” fashion to Ca. The H–H bond lengths in these semiconducting phases were elongated because of H 2 σ → Ca d donation, and Ca d → H 2 σ* back-donation, via a Kubas-like mechanism. P$\bar{6}$m2 CaSH 3 , consisting of two-dimensional HS and CaH 2 sheets, was metastable and metallic above 128 GPa. The presence of van Hove singularities increased its density of states at the Fermi level and concomitantly the superconducting critical temperature, which was estimated to be as high as ~100 K at 128 GPa. Furthermore, this work will inspire the search for superconductivity in materials based upon honeycomb HX (X = S, Se, Te) and MH 2 (M = Mg, Ca, Sr, Ba) layers under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unique Orientation of the Solid–Solid Interface at the Janus Particle Boundary Induced by Ionic Liquids

This study reveals the unique role on Janus particles of the solid–solid interface at the boundary in determining particle interactions and assembly. In an aqueous ionic liquid (IL) solution, Janus spheres adopt intriguing orientations with their boundaries pinned on the glass substrate. In addition, it was further discovered that the orientation was affected by the particle amphiphilicity as well as the chemical structure and concentration of the IL. Further characterization suggests that the adsorption on the hydrophilic side is due to both an electrostatic interaction and hydrogen bonding, while adsorption on the hydrophobic side is due to hydrophobic attraction. Through the concerted interplay of all these interactions, the amphiphilic boundary may attract an excessive amount of IL cations, which guide the unique orientations of the Janus spheres. The results highlight the importance of the Janus boundary that has not been recognized previously. Adsorption at the solid–solid interfaces may inspire new applications in areas such as separation and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Parsimonious Potential Energy Surface Expansions Using Dictionary Learning with Multipass Greedy Selection

Potential energy surfaces fit with basis set expansions have been shown to provide accurate representations of electronic energies and have enabled a variety of high-accuracy dynamics, kinetics, and spectroscopy applications. The number of terms in these expansions scales poorly with system size, a drawback that challenges their use for systems with more than similar to 10 atoms. A solution is presented here using dictionary learning. Subsets of the full set of conventional basis functions are optimized using a newly developed multipass greedy regression method inspired by forward and backward selection methods from the statistics, signal processing, and machine learning literatures. Here, the optimized representations have accuracies comparable to the full set but are 1 or more orders of magnitude smaller, and notably, the number of terms in the optimized multipass greedy expansions scales approximately linearly with the number of atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transient Mesoscopic Immiscibility, Viscosity Anomaly, and High Internal Pressure at the Semiconductor–Metal Transition in Liquid Ga 2 Te 3

Gallium tellurides appear to be promising phase-change materials (PCMs) of the next generation for brain-inspired computing and reconfigurable optical metasurfaces. They are different from the benchmark PCMs because of sp 3 gallium hybridization in both cubic Ga 2 Te 3 and amorphous pulsed laser deposition (PLD) films. Liquid Ga 2 Te 3 also shows a viscosity η(T) anomaly just above melting when η(T) first increases and only then starts decreasing. We used high-energy X-ray diffraction to observe a transient mesoscopic immiscibility that suggested dense metallic liquid droplets in a semiconducting melt. The η(T) shape was consistent with this finding. A vanishing first sharp diffraction peak that also shifts to a higher Q indicates a high internal pressure in the metallic melt, which produces a remarkable asymmetry of the Ga–Te nearest neighbor distances and is reminiscent of high-pressure rhombohedral Ga 2 Te 3 . Finally, the observed phenomena provide a realistic scenario for a fast, multilevel SET–RESET response, which also unravels similar trends in the purported density-driven liquid polyamorphism of water, phosphorus, sulfur, and other materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Emulating Quantum Entangled Biphoton Spectroscopy Using Classical Light Pulses

We show that for a class of quantum light spectroscopy (QLS) experiments using n = 0, 1, 2, ··· classical light pulses and an entangled photon pair (a biphoton state) where one photon acts as a reference without interacting with the matter sample, identical signals can be obtained by replacing the biphotons with classical-like coherent states of light, where these are defined explicitly in terms of the parameters of the biphoton states. An input-output formulation of quantum nonlinear spectroscopy is used to prove this equivalence. We demonstrate the equivalence numerically by comparing a classical pump–quantum probe experiment with the corresponding classical pump–classical probe experiment. This analysis shows that understanding the equivalence between entangled biphoton probes and carefully designed classical-like coherent state probes leads to quantum-inspired classical experiments that yield equivalent signals and provides insights for the future design of QLS experiments that could provide a true quantum advantage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Protein-Mimetic Self-Assembly with Synthetic Macromolecules

Protein-mimetic amphiphiles have significant promise as a platform to access the complex functions of natural biological materials and incorporate the tunability and environmental resilience of synthetic materials. The fields of polymer chemistry and chemical biology have concurrently approached the development of biomimetic amphiphiles with materials ranging from random amphiphilic copolymers to peptide–lipid conjugates. In this Perspective, we incorporate strategies from diverse chemical arenas for controlling assembled morphologies and dynamics of protein-mimetic synthetic macromolecules. An overview of significant advances in peptide amphiphiles and single-chain polymer nanoparticles provides the foundation for comparing recent advances in the implementation of multiple intermolecular interactions and computational strategies to fine-tune the assembled structures. We aim to bridge these fields, combining insights from multiple disciplines to inspire new approaches for the development of protein-mimetic materials, as these assemblies have far-reaching applications including in the development of new sensors, catalysts, and therapeutics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Cation–Ligand Interactions Dictate Salt Partitioning and Diffusivity in Ligand-Functionalized Polymer Membranes

Membranes are an attractive alternative to current thermal separations due to their scalability and energy efficiency in desalinating water. Unfortunately, many of the conventional membrane materials available today are unable to differentiate between ionic solutes, especially alkali cations, compromising their use in ion–ion separations. Inspired by the ion-specific interactions exhibited by biological ion channels, recent research efforts have focused on synthesizing and characterizing new polymeric materials that incorporate ligands into polymer networks to bias solubility and/or diffusivity of one cationic species over another. Despite these efforts, little is known about the influence of incorporating ligands into polymer membranes on solubility and diffusivity of the complexing species. In this study, we first build a qualitative model of salt partitioning, diffusivity, and permeability in generic cation-complexing ligand-functionalized polymer membranes. Next, to validate our model and hypotheses, we perform atomistic molecular dynamics simulations of a 12-crown-4-functionalized membrane in the presence of alkali halide salts at low concentration. Generally, cation complexation enhances cation solubility but decreases diffusivity. Interestingly, the reduction in diffusivity is predicted to be larger than the enhancement in solubility for materials which operate by the mechanisms proposed in our physical picture, ultimately resulting in a reduction in the permeability of the selectively complexing ion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Precise Linker Length and Dynamic Bond Exchange Control Penetrant Diffusion in Dense Vitrimers

Polymer networks with dynamic covalent bonds have been investigated for their self-healing ability, recyclability, and potential as more sustainable materials. Recent results have indicated that in some cases, bond exchange can enhance the transport of penetrants in dense networks, pointing to their potential for separations of membranes. Here, imine dynamic bonds in ethylene oxide (EO) networks with precise linker lengths were synthesized to investigate the transport of N,N′-bis(2,5-di-tert-butylphenyl)-3,4,9,10-perylenedicarboximide (BTBP), a large, anisotropic dye molecule. Networks with mesh sizes smaller than, comparable to, and greater than the size of the penetrant axes were investigated to probe the effects of bond exchange and network confinement on transport. Mesh sizes, which ranged from 0.5 to 1.62 nm, were determined from shear rheology, glass transitions by calorimetry, and probe diffusion coefficients by fluorescence recovery after photobleaching. Permanent networks with identical EO chain lengths were prepared as control samples, and up to a 3 orders of magnitude increase in diffusion coefficient is observed in the dynamic systems for short linkers containing 13 backbone atoms. The longest linkers with 71 backbone atoms show no difference between the permanent and dynamic networks. Linkers shorter than 11 backbone atoms, corresponding to a mesh size smaller than the penetrant small axis, diffusion is no longer observable on the experimental time scale, indicating a sharp cutoff attributed to the precise linkers and narrow mesh size distribution. The dynamic imine exchange time scales were compared to the diffusive hopping times of penetrants and indicate that exchange can occur during a diffusive displacement. Furthermore, these findings provide insights into the factors affecting penetrant transport in dense polymers and inspire the development of next-generation selective polymer membranes.

Diffusion↗
DOE OSTI2025

Bottom-Up Simulation, Reconstruction, and Quantification of Macromolecule Sequences from Experimental Polymerizations

Motivated by the canonical sequence–structure–function paradigm, tools to characterize chemical patterning in natural biomacromolecules, from proteins to nucleic acids, have grown exponentially in recent years. However, analogous strategies for synthetic macromolecules remain in nascent stages, complicated by sequence polydispersity and analytical limitations. To address this, we have developed a comprehensive and open-source Python package, PRISM (polymer rate insights and sequence modeling), an end-to-end workflow that provides a path from experimental kinetics measurements to quantitative and qualitative metrics for describing chemical patterning in stochastic polymers. First, a numerical integration strategy was constructed to simulate and fit experimental data from reversible addition–fragmentation chain transfer (RAFT) polymerization kinetics, enabling the facile estimation of relevant reactivity ratios. These ratios were then used in a mechanism-specific stochastic kinetic simulation strategy to simulate sequence ensembles corresponding to model systems spanning experimental copolymers, classes of statistical polymers (e.g., alternating, block, and gradient), and multiblock copolymers. Lastly, inspired by sequence homology metrics from bioinformatics, we introduce visualization strategies and quantitative metrics to facilitate comparisons of different sequence ensembles. As the sequence–structure–function paradigm becomes increasingly central in de novo design of synthetic macromolecules, this toolkit provides a first step toward accurate and representative sequence description and featurization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗