Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Vibration Isolation System for Cryocoolers of Soft X-Ray Spectrometer (SXS) Onboard ASTRO-H (Hitomi)

Soft X-ray Spectrometer (SXS) onboard ASTRO-H (named Hitomi after launch) is a micro-calorimeter-type spectrometer, installed in a dewar to be cooled at 50 mK. The energy resolution of the SXS engineering model suffered from micro-vibration from cryocoolers mounted on the dewar. This is mitigated for the flight model by introducing vibration isolation systems between the cryocoolers and the dewar. The detector performance of the flight model was verified before launch of the spacecraft in both ambient condition and thermal-vac condition, showing no detectable degradation in energy resolution. The in-orbit performance was also consistent with that on ground, indicating that the cryocoolers were not damaged by launch environment. The design and performance of the vibration isolation system along with the mechanism of how the micro-vibration could degrade the cryogenic detector is shown.

Microcalorimeter↗

Enhancing Fault Isolation for Health Monitoring of Electric Aircraft Propulsion by Embedding Failure Mode and Effect Analysis into Bayesian Networks

This paper describes a fault isolation approach for electric powertrains of unmanned aerial vehicles. The approach leverages the combination of failure mode and effect analysis (FMEA) and Bayesian networks, thus introducing depend-ability structures into a diagnostic framework. Faults and failure events from the FMEA are mapped within a Bayesian network, where network edges replicate the links embedded within FMEAs. This framework helps the fault isolation process by identifying the probability of occurrence of specific faults or root causes given evidence observed through sensor signals. The framework is applied to an electric power-train system of a small, rotary-wing unmanned aerial vehicle, demonstrating how a Bayesian network enhanced by FMEA helps disambiguate between root causes of incipient failures, which would otherwise be considered as equally probable.

Fault Isolation↗

Shock-isolation material selection for electronic packages in hard-target environment

High velocity munitions and kinetic penetrators experience monumental external forces, impulses, and accelerations. The hard target environment is immensely taxing on sophisticated electronic components and recorders designed to retrieve valuable data related to the systems performance and characteristics in the periods of flight, impact, and post-impact. Such electronic systems have upper limits of overall shock intensity which, if exceeded, will either shorten the operating life of the parts or risk destruction resulting in loss of both the data and the principal value of the recorder. The focus of this project was to refine the categorization of leading material types for encapsulation and passive shock isolation and implement them in a method useable for a wide variety of environments. Namely, a design methodology capable of being tailored to the specific impact conditions to maximize the lively hood of sensitive electronics and the information recorded. The results of the study concluded that the materials observed under consistent dynamic high strain rate tests, which include Conathane® EN-4/9, Slygard®-184, and Stycast™-2651, behaved well in certain aspects of energy transmission and shock when considering the frequency environment or package coupled with the isolation material’s application. Key points about the implementation of the materials in extreme shock environments is discussed with the connection to energy analysis, loss attributes, and pulse transmissibility modeling. However, attempts to model the materials solely based on energy transmissibility in the frequency domain using only external experimental data and simplified boundary conditions was not found to be consistent with that acquired from the pressure bar experiments. Further work will include the addition of further material experimentation of the encapsulants in other frequency and temperature states, confined and pre-load boundary states, and composite constructions.

36 MATERIALS SCIENCE↗

Nanofluidic transport through isolated carbon nanotube channels: Advances, controversies, and challenges

Owing to their simple chemistry and structure, controllable geometry, and a plethora of unusual yet exciting transport properties, carbon nanotubes (CNTs) have emerged as exceptional channels for fundamental nanofluidic studies, as well as building blocks for future fluidic devices that can outperform current technology in many applications. Leveraging the unique fluidic properties of CNTs in advanced systems requires a full understanding of their physical origin. Recent advancements in nanofabrication technology enable nanofluidic devices to be built with a single, nanometer-wide CNT as a fluidic pathway. These novel platforms with isolated CNT nanochannels offer distinct advantages for establishing quantitative structure–transport correlations in comparison with membranes containing many CNT pores. In addition, they are promising components for single-molecule sensors as well as for building nanotube-based circuits wherein fluidics and electronics can be coupled. With such advanced device architecture, molecular and ionic transport can be manipulated with vastly enhanced control for applications in sensing, separation, detection, and therapeutic delivery. Recent achievements in fabricating isolated-CNT nanofluidic platforms are highlighted, along with the most-significant findings each platform enables for water, ion, and molecular transport. Furthermore, the implications of these findings and remaining open questions on the exceptional fluidic properties of CNTs are also discussed.

36 MATERIALS SCIENCE↗

Isolating the Electrocatalytic Activity of a Confined NiFe Motif within Zirconium Phosphate

Unique classes of active-site motifs are needed for improved electrocatalysis. Herein, the activity of a new catalyst motif is engineered and isolated for the oxygen evolution reaction (OER) created by nickel–iron transition metal electrocatalysts confined within a layered zirconium phosphate matrix. It is found that with optimal intercalation, confined NiFe catalysts have an order of magnitude improved mass activity compared to more conventional surface-adsorbed systems in 0.1 m KOH. Interestingly, the confined environments within the layered structure also stabilize Fe-rich compositions (90%) with exceptional mass activity compared to known Fe-rich OER catalysts. Through controls and by grafting inert molecules to the outer surface, it is evidenced that the intercalated Ni/Fe species stay within the interlayer during catalysis and serve as the active site. After determining a possible structure (wycherproofite), density functional theory is shown to correlate with the observed experimental compositional trends. It is further demonstrated that the improved activity of this motif is correlated to the Fe and water content/composition within the confined space. This work highlights the catalytic enhancement possibilities available through zirconium phosphate and isolates the activity from the intercalated species versus surface/edge ones, thus opening new avenues to develop and understand catalysts within unique nanoscale chemical environments.

36 MATERIALS SCIENCE↗

Highly Dispersed SiO x /Al 2 O 3 Catalysts Illuminate the Reactivity of Isolated Silanol Sites

Abstract The reaction of γ‐alumina with tetraethylorthosilicate (TEOS) vapor at low temperatures selectively yields monomeric SiO x species on the alumina surface. These isolated (‐AlO) 3 Si(OH) sites are characterized by PXRD, XPS, DRIFTS of adsorbed NH 3 , CO, and pyridine, and 29 Si and 27 Al DNP‐enhanced solid‐state NMR spectroscopy. The formation of isolated sites suggests that TEOS reacts preferentially at strong Lewis acid sites on the γ‐Al 2 O 3 surface, functionalizing the surface with “mild” Brønsted acid sites. For liquid‐phase catalytic cyclohexanol dehydration, these SiO x sites exhibit up to 3.5‐fold higher specific activity than the parent alumina with identical selectivity.

Mouat, Aidan R.↗

Kinetic Destabilization of Metal–Metal Single Bonds: Isolation of a Pentacoordinate Manganese(0) Monoradical

Abstract The 17e − monoradical [Mn(CO) 5 ] is widely recognized as an unstable organometallic transient and is known to dimerize rapidly with the formation of a MnMn single bond. As a result of this instability, isolable analogues of [Mn(CO) 5 ] have remained elusive. Herein, we show that two sterically encumbering isocyanide ligands can destabilize the MnMn bond leading to the formation of the isolable, manganese(0) monoradical [Mn(CO) 3 (CNAr Dipp2 ) 2 ] (Ar Dipp2 =2,6‐(2,6‐( i Pr) 2 C 6 H 3 ) 2 C 6 H 3 ). The persistence of [Mn(CO) 3 (CNAr Dipp2 ) 2 ] has allowed for new insights into nitrosoarene spin‐trapping studies of [Mn(CO) 5 ].

Agnew, Douglas W.↗

Highly dispersed SiO x /Al 2 O 3 catalysts illuminate the reactivity of isolated silanol sites

The reaction of γ-alumina with tetraethylorthosilicate (TEOS) vapor at low temperatures selectively yields monomeric SiO x species on the alumina surface. These isolated (-AlO) 3 Si(OH) sites are characterized by PXRD, XPS, DRIFTS of adsorbed NH 3 , CO, and pyridine, and 29 Si and 27 Al DNP-enhanced solid-state NMR spectroscopy. The formation of isolated sites suggests that TEOS reacts preferentially at strong Lewis acid sites on the γ-Al 2 O 3 surface, functionalizing the surface with “mild” Brønsted acid sites. As a result, for liquid-phase catalytic cyclohexanol dehydration, these SiO x sites exhibit up to 3.5-fold higher specific activity than the parent alumina with identical selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anaerobic gut fungi: Advances in isolation, culture, and cellulolytic enzyme discovery for biofuel production

Anaerobic gut fungi are an early branching family of fungi that are commonly found in the digestive tract of ruminants and monogastric herbivores. It is becoming increasingly clear that they are the primary colonizers of ingested plant biomass, and that they significantly contribute to the decomposition of plant biomass into fermentable sugars. As such, anaerobic fungi harbor a rich reservoir of undiscovered cellulolytic enzymes and enzyme complexes that can potentially transform the conversion of lignocellulose into bioenergy products. Despite their unique evolutionary history and cellulolytic activity, few species have been isolated and studied in great detail. As a result, their life cycle, cellular physiology, genetics, and cellulolytic metabolism remain poorly understood compared to aerobic fungi. To help address this limitation, this work briefly summarizes the current body of knowledge pertaining to anaerobic fungal biology, and describes progress made in the isolation, cultivation, molecular characterization, and long-term preservation of these microbes. Finally, we also discuss recent cellulase- and cellulosome-discovery efforts from gut fungi, and how these interesting, non-model microbes could be further adapted for biotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗

Characterizing friction in sliding isolation bearings

Summary The force–displacement behavior of the Friction Pendulum™ (FP) bearing is a function of the coefficient of sliding friction, axial load on the bearing and effective radius of the sliding surface. The coefficient of friction varies during the course of an earthquake with sliding velocity, axial pressure and temperature at the sliding surface. The velocity and axial pressure on the bearing depend on the response of the superstructure to the earthquake shaking. The temperature at an instant in time during earthquake shaking is a function of the histories of the coefficient of friction, sliding velocity and axial pressure, and the travel path of the slider on the sliding surface. A unified framework accommodating the complex interdependence of the coefficient of friction, sliding velocity, axial pressure and temperature is presented for implementation in nonlinear response‐history analysis. Expressions to define the relationship between the coefficient of friction and sliding velocity, axial pressure, and temperature are proposed, based on available experimental data. Response‐history analyses are performed on FP bearings with a range of geometrical and liner mechanical properties and static axial pressure. Friction is described using five different models that consider the dependence of the coefficient of friction on axial pressure, sliding velocity and temperature. Frictional heating is the most important factor that influences the maximum displacement of the isolation system and floor spectral demands if the static axial pressure is high. Isolation system displacements are not significantly affected by considerations of the influence of axial pressure and velocity on the coefficient of friction. Copyright © 2014 John Wiley & Sons, Ltd.

Kumar, Manish↗

Trichoderma species isolated from grapevine with tolerance towards common copper fungicides used in viticulture for plant protection

Abstract BACKGROUND Copper‐containing fungicides are applied broadly in organic viticulture against downy mildew caused by Plasmopara viticola . Although long‐term application of copper‐based fungicides is associated with ecotoxic effects on the environment, their use in viticulture is required until sustainable alternatives are available. Trichoderma spp. might be a promising approach to fungicide reduction while promoting plant growth and development and displaying biocontrol activity. This study aims to examine the tolerance and compatibility of Trichoderma spp. to copper fungicides. This work contributes to the development of a spray application consisting of a copper‐tolerant Trichoderma sp. combined with a downscaled copper fungicide rate against P. viticola . RESULTS Trichoderma spp. isolated from grapevine wood in vineyards were identified and used for tolerance screening in various concentrations of copper fungicides. Copper hydroxide was identified as being highly compatible with Trichoderma . Two Trichoderma candidates, T. koningiopsis and T. harzianum , showed high copper tolerance in mycelial growth and germination tests, and were adapted to 2.85 g Cu L −1 of the selected fungicide. Microscopic investigations showed the attachment of copper compounds to fungal cell walls and copper uptake within the cytoplasm. In the case of high tolerance, large‐scale copper uptake was prevented. CONCLUSION Our findings identified two highly copper‐tolerant Trichoderma isolates with natural adaptation to the vineyard ecosystem, which could be further tested as biostimulants and biocontrol agents, combined with a reduced fungicide rate for sustainable plant protection. © 2022 Society of Chemical Industry.

Küpper, Verena↗

Isolation and Structural Elucidation of 15–Nuclear Copper Dihydride Clusters: An Intermediate in the Formation of a Two–Electron Copper Superatom

Highly reactive copper-dihydride clusters, [Cu 15 (H) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ](PF 6 ) {R = n Bu (1 H ), n Pr (2 H ), i Bu (3 H )}, are isolated during the reaction of [Cu 28 H 15 {S 2 CN n Bu 2 } 12 ](PF 6 ) with ten equivalents of phenylacetylene. They are found to be intermediates in the formation of the earlier reported two-electron superatom [Cu 13 (S 2 CNR 2 ) 6 (C 2 Ph) 4 ] + . Better yields are obtained by reacting dithiocarbamate sodium salts, [Cu(CH 3 CN) 4 ](PF 6 ), BH 4 – and phenylacetylene. The presence of two hydrides in the isolated clusters is confirmed by the synthesis and characterization of its deuteride analogue [Cu 15 (D) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ] + , and a single-crystal neutron structure of 2 H . Structural characterization of 1 H reveals a new bicapped icosahedral copper(I) cage encapsulating a linear copper dihydride (CuH 2 ) – unit. In conclusion, reaction of 3 H with Au(I) salts yields a highly luminescent [AuCu 12 (S 2 CNiBu 2 ) 6 (C 2 Ph) 4 ] + cluster.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Genesis of Active Pt/CeO 2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide- supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. Here the results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Genetic mapping of sorghum resistance to an Illinois isolate of Colletotrichum sublineola

Anthracnose leaf blight (ALB) is an economically important disease of sorghum [Sorghum bicolor (L.) Moench] caused by the fungal pathogen Colletotrichum sublineola Henn. ex Sacc. & Trotter. Although qualitative and quantitative resistance have been identified for ALB, the usefulness of resistance loci differs depending on the pathogen pathotype. Identifying resistance effective against unique pathogen pathotypes is critical to managing ALB, as the disease is managed primarily through the deployment of host resistance. We isolated C. sublineola from ALB-infected leaves collected in Illinois and found that the strain was a novel pathotype, as it produced a unique combination of virulence against a set of differential lines. Using this isolate, we inoculated 579 temperate-adapted sorghum conversion lines in 2019 and 2020. We then conducted a genome-wide association study (GWAS) and a metabolic pathway analysis using the Pathway Associated Study Tool (PAST). We identified 47 significant markers distributed across all chromosomes except chromosome 8. We identified 32 candidate genes based on physical proximity with significant markers, some of which have a known role in host defense. We identified 47 pathways associated with ALB resistance, indicating a role for secondary metabolism in defense to ALB. Our results are important to improve the understanding of the genetic basis of ALB resistance in sorghum and highlight the importance of developing durable resistance to ALB.

59 BASIC BIOLOGICAL SCIENCES↗

Application of the metabolic modeling pipeline in KBase to categorize reactions, predict essential genes, and predict pathways in an isolate genome

The DOE Systems Biology Knowledgebase (KBase) platform offers a range of powerful tools for the reconstruction, refinement, and analysis of genome-scale metabolic models built from microbial isolate genomes. In this chapter, we describe and demonstrate these tools in action with an analysis of isoprene production in the Bacillus subtilis DSM genome. Two different methods are applied to build initial metabolic models for the DSM genome, then the models are gapfilled in three different growth conditions. Next, flux balance analysis (FBA) and flux variability analysis (FVA) techniques are applied to both study the growth of these models in minimal media and classify reactions within each model based on essentiality and functionality. The models are applied with the FBA method to predict essential genes, which are then compared to an updated list of essential genes obtained for B. subtilis 168, a very similar strain to the DSM isolate. The models are also applied to simulate Biolog growth conditions, and these results are compared with Biolog data collected for B. subtilis 168. Finally, the DSM metabolic models are applied to explore the pathways and genes responsible for producing isoprene in this strain. These studies demonstrate the accuracy and utility of models generated from the KBase pipelines, as well as exploring the tools available for analyzing these models.

DOE knowledgebase↗

The production of isolated photons in PbPb and pp collisions at $\sqrt{s_\mathrm{NN}} =$ 5.02 TeV

The transverse energy ($ {E}_{\mathrm{T}}^{\upgamma} $) spectra of photons isolated from other particles are measured using proton-proton (pp) and lead-lead (PbPb) collisions at the LHC at $ \sqrt{s_{\mathrm{NN}}} $ = 5.02 TeV with integrated luminosities of 27.4 pb$^{−1}$ and 404 μb$^{−1}$ for pp and PbPb data, respectively. The results are presented for photons with 25 <$ {E}_{\mathrm{T}}^{\upgamma} $< 200 GeV in the pseudorapidity range |η| < 1.44, and for different centrality intervals for PbPb collisions. Photon production in PbPb collisions is consistent with that in pp collisions scaled by the number of binary nucleon-nucleon collisions, demonstrating that photons do not interact with the quark-gluon plasma. Therefore, isolated photons can provide information about the initial energy of the associated parton in photon+jet measurements. The results are compared with predictions from the next-to-leading-order jetphox generator for different parton distribution functions (PDFs) and nuclear PDFs (nPDFs). The comparisons can help to constrain the nPDFs global fits.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of dialysis and solid-phase extraction for isolation and concentration of dissolved organic matter prior to Fourier transform ion cyclotron resonance mass spectrometry

We compare two methods, solid-phase extraction (SPE) and dialysis, commonly used for extraction and concentration of dissolved organic matter (DOM) prior to molecular characterization by electrospray ionization (ESI) and ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry. Spectra of DOM samples from Minnesota and Sweden peatlands that were extracted with styrene divinyl benzene polymer SPE sorbents included ions with formulas that had higher oxygen to carbon (O/C) ratios than spectra of DOM from the same samples after de-salting by dialysis. The SPE method was not very effective in extracting several major classes of DOM compounds that had high ESI efficiencies, including carboxylic acids and organo-sulfur compounds, and that out-competed other less-functionalized compounds (e.g., carbohydrates) for charge in the ESI source. Here, the large abundance of carboxylic acids in the dialysisextracted DOM, likely the result of in situ microbial production, makes it difficult to see other (mainly hydrophilic) compounds with high O/C ratios. Our results indicate that, while dialysis is generally preferable for the isolation of DOM, for samples with high microbial inputs, the use of both isolation methods is recommended for a more accurate molecular representation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗