Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Self-Resonant Coil Design for High-frequency High-Power Inductive Wireless Power Transfer

In this paper, the design methodology of a high-frequency, high-power, long-distance inductive wireless power transfer (WPT) is presented. The airgap (d) of a traditional high-power (>1 kW) WPT is limited to a few hundred millimeters, which is almost 1/4th of the coil diameter, D; d ≤ D/4. In this paper, the power transfer distance is significantly increased (d ≥ 1.5D) by adopting a high-frequency magnetic design and GaN-based power electronics. The material and design of the coil and shield are investigated using FEA and tested experimentally. A high frequency 6.78 MHz wireless charging system was built to transfer 1 kW power over 3 m airgap.

Mohammad, Mostak↗

Cold acclimation threshold induction temperatures of switchgrass ecotypes grown under a long and short photoperiod

Abstract Plants can cold acclimate to enhance their freezing tolerance by sensing declining temperature and photoperiod cues. However, the factors influencing genotypic variation in the induction of cold acclimation are poorly understood among perennial grasses. We hypothesized that the more northern upland switchgrass ( Panicum virgatum L.) ecotype develops a higher degree of freezing tolerance by initiating cold acclimation at higher temperatures as compared with the coastal and southern lowland ecotypes. First, we determined the optimal method for assessing freezing tolerance and the length of exposure to 8/4°C required to induce the maximum level of freezing tolerance in the most northern upland and most southern lowland genotypes. We characterized the maximum freezing tolerance of eight uplands, three coastal and five lowland genotypes grown for 21 days at 8/4°C and a 10 or 16 h photoperiod. Next, we identified the temperature required to induce cold acclimation by exposing the 16 genotypes for 7 days at 20–6°C constant temperatures under a 10 or 16 h photoperiod. Cold acclimation initiated at temperatures 5 and 7°C higher in upland than in coastal and lowland genotypes. Among upland genotypes the shorter photoperiod induced cold acclimation at a 1°C higher temperature. Genotypes originating from a more northern latitude initiate cold acclimation at higher temperatures and develop higher maximum freezing tolerances. An earlier response to declining temperatures may provide the upland ecotype with additional time to prepare for winter and provide an advantage when plants are subjected to the rapid changes in fall temperature associated with injurious frosts.

60 APPLIED LIFE SCIENCES↗

Investigation of processing advanced waste forms in Cold Crucible Induction Melter systems

The Cold Crucible Induction Melter (CCIM) technology has been identified in several independent reviews and studies as a potential alternative or supplemental vitrification technology for specific U.S. Department of Energy (DOE) high level radioactive waste (HLW) streams. These inventories have unique chemistries, such as high alumina, high iron, high chromium, etc., that are not amenable to efficient immobilization in conventional borosilicate glass (BSG) matrices. Advanced waste forms, such as iron phosphate glass (FePG), high crystalline BSG (HC-BSG), and alumino-silicate glass-ceramic (GC) have been shown to provide significantly improved immobilization matrices for these challenging waste streams, including dramatically improved waste loadings; however, they are difficult to efficiently process in the baseline joule-heated ceramic melters (JHCMs). The CCIM technology can effectively process these advanced waste forms at the desired high waste loadings. This paper describes the most recent collaborative activities between the DOE Office of Environmental Management (DOE EM) and various Russian institutions in modeling, development and testing of advanced waste forms in CCIMs, including FePG and HC-BSG formulations. Additionally, past interactions with other international partners, including France and Korea, are described. Finally, recent enhancements to CCIM processing related to modeling, draining techniques and automated control, which were collaboratively developed, will be discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ultra-trace determination of Strontium-90 in environmental soil samples from Qatar by collision/reaction cell-inductively coupled plasma mass spectrometry (CRC-ICP-MS/MS)

Because of the very low level of {sup 90}Sr in the environmental soil samples and its determination by beta counting may take several weeks, we developed a procedure for ultra-trace determination of {sup 90}Sr using collision reaction cell-inductively coupled plasma tandem mass spectrometry (CRC-ICP-MS/MS, Agilent 8800). Soil samples were dried at 105 deg. C and then heated in a furnace at 550 deg. C to remove any organics present. 500 g of each soil samples were aliquoted into 2000 ml glass beakers. Each Soils samples were soaked in 2 ppm Sr solution carrier to allow determination of chemical yield. The solid to liquid ratio was 1:1. Finally the soil samples were dried at 105 deg. C. Five hundred milliliters concentrated nitric acid and 250 ml hydrochloric acid volumes were added on 500 g soil samples. The samples were digested on hot plate at 80 deg. C to prevent spraying with continuous manual mixing. The leachate solution was separated. The solids were rinsed with 500 ml deionized water, warmed on a hot plate and the leachate plus previous leachate were filtered and the total volume was reduced to 500 ml by evaporation. Final leachate volume was transferred to a centrifuge tubes. The centrifuge tubes were centrifuged at 3,500 rpm for 10 min. The leachate was transferred to a 1 L beaker and heated on a hot plate to evaporate the leachate to dryness. The reside was re-dissolved in 100 ml of 2% HNO{sub 3} and reduced by evaporation to 10 mL. The solution was measured directly by CRC-ICP-MS/MS by setting the first quadruple analyzer to m/z 90 and introducing oxygen gas into the reaction cell for elimination isobar interference from zirconium-90. The method was validated by measurements of standard reference materials and applied on environmental soil samples. The overall time requirement for the measurement of strontium-90 by CRC-ICP-MS/MS is 2 days, significantly shorter than any radioanalytical protocol currently available. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of gas mixing ratio on etch behavior of ZrO{sub 2} thin films in Cl{sub 2}-based inductively coupled plasmas

The analysis of the ZrO{sub 2} thin film etch mechanism in the Cl{sub 2}/Ar, Cl{sub 2}/He, and Cl{sub 2}/N{sub 2} inductively coupled plasmas was carried out. It was found that an increase in additive gas fraction at fixed gas pressure and input power results in increasing ZrO{sub 2} etch rate, which changes from 1.2 nm/min for pure Cl{sub 2} plasma up to 3.15, 2.40, and 2.31 nm/min for 80% Ar, N{sub 2}, and He, respectively. Langmuir probe diagnostics and zero-dimensional plasma modeling indicated that both plasma parameters and active species kinetics are noticeably influenced by the initial composition of the gas mixture. From the model-based analysis of etch kinetics, it was shown that, similarly to the case of BCl{sub 3}-based plasmas, the behavior of the ZrO{sub 2} etch rate corresponds to the ion-flux-limited etch regime.

36 MATERIALS SCIENCE↗

Characterization of low-temperature silicon nitride films produced by inductively coupled plasma chemical vapor deposition

Silicon nitride films were synthesized at 170 deg. C by using inductively coupled plasma chemical vapor deposition under three microwave power conditions of 500, 800, and 1000 W. The chemical, physical and electrical properties of the deposited silicon nitride films were characterized by Fourier transform infrared, wet etching, atomic force microscopy, ellipsometry, J-V, and C-V measurements of metal-insulator-semiconductor. The microwave power for film deposition is found to play an important role at the films' properties. A high microwave power reduces the retention of hydrogen in a form of Si-H and N-H atomic bonds. The microwave power significantly affects the density of pin holes; the 800 W film has the lowest density of pin holes. In general, the low-temperature silicon nitride films possess better surface roughness than the conventional silicon nitride films produced at higher temperatures. The low-temperature silicon nitride films exhibit an abrupt breakdown, a characteristic of avalanche breakdown. The variation in breakdown strength is correlated with the change in pin-hole density, and the 800 W silicon nitride film possesses the highest breakdown strength. The microwave power has limited influences on leakage current and resistivity of the films. All the low-temperature silicon nitride films are characterized by high-density fixed charges and interface charge traps, of which both densities vary slightly with the microwave power for film deposition.

36 MATERIALS SCIENCE↗

Feedback control of plasma electron density and ion energy in an inductively coupled plasma etcher

Here the authors report the development of a fuzzy logic based feedback control of the plasma electron density and ion energy for high density plasma etch process. The plasma electron density was measured using their recently developed transmission line microstrip microwave interferometer mounted on the chamber wall, and the rf voltage was measured by a commercial impedance meter connected to the wafer stage. The actuators were two 13.56 MHz rf power generators which provided the inductively coupled plasma power and bias power, respectively. The control system adopted the fuzzy logic control algorithm to reduce frequent actuator action resulting from measurement noise. The experimental results show that the first wafer effect can be eliminated using closed-loop control for both poly-Si and HfO{sub 2} etching. In particular, for the HfO2 etch, the controlled variables in this work were much more effective than the previous one where ion current was controlled, instead of the electron density. However, the pressure disturbance effect cannot be reduced using plasma electron density feedback.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of InP etching mechanisms in a Cl{sub 2}/H{sub 2} inductively coupled plasma by optical emission spectroscopy

Optical emission spectroscopy (OES) has been used in order to investigate the InP etching mechanisms in a Cl{sub 2}-H{sub 2} inductively coupled plasma. The authors have previously shown that anisotropic etching of InP could be achieved for a H{sub 2} percentage in the 35%-45% range where the InP etch rate also presents a local maximum [J. Vac. Sci. Technol. B 24, 2381 (2006)], and that anisotropic etching was due to an enhanced passivation of the etched sidewalls by a silicon oxide layer [J. Vac. Sci. Technol. B 26, 666 (2008)]. In this work, it is shown that this etching behavior is related to a maximum in the H atom concentration in the plasma. The possible enhancement of the sidewall passivation process in the presence of H is investigated by comparing OES measurements and etching results obtained for Cl{sub 2}-H{sub 2} and Cl{sub 2}-Ar gas mixtures.

36 MATERIALS SCIENCE↗

Velocity distribution function of sputtered gallium atoms during inductively coupled argon plasma treatment of a GaAs surface

A GaN laser diode at 403.3 nm is used to measure the velocity distribution function (vdf) of Ga atoms sputtered from a radio-frequency biased GaAs substrate in a low pressure inductively coupled plasma (ICP) argon discharge. To investigate both perpendicular (V{sub z} normal to wafer) and longitudinal (V{sub x} parallel to wafer) velocity components, laser induced fluorescence (LIF) measurements are performed in the z direction and atomic absorption spectroscopy (AAS) in the x direction. The longitudinal vdf of Ga sputtered atoms is very close to a Lorentzian function with V{sub x} comprised between 0 and 7500 m s{sup -1}, while the perpendicular velocities V{sub z} can reach 10 000 m s{sup -1}. Experimental results are compared to molecular dynamics (MD) simulations of Ar{sup +} ion sputtering of GaAs under 200 eV bombardment. MD predictions and experiments are in fairly good agreement, which confirms the existence of products sputtered from the surface with kinetic energies larger than 10 eV. In etching processes dominated by physical bombardment, these energetic atoms could alter passivation layers on sidewalls and be responsible for defects observed in nanodevices. The best fit of the Doppler-broadened LIF and AAS profiles with the vdfs predicted by sputtering theory allows one to estimate the surface binding energy of Ga atoms in GaAs, E{sub b}, to be around 3 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Differential etching behavior between semi-insulating and n-doped 4H-SiC in high-density SF{sub 6}/O{sub 2} inductively coupled plasma

The author investigated the etching characteristics of semi-insulating (SI) and n-doped (n-) 4H-SiC substrates at a high etch rate of about 2 {mu}m/min using high-density SF{sub 6}/O{sub 2} inductively coupled plasma. The etch rate of SI-SiC was found to be lower than that of n-SiC, and the etching profile of SI-SiC showed retrograde features with a larger sidewall angle and a rounder etched bottom compared to n-SiC. These characteristics are attributed to the difference in wafer heating and negative charging of the sidewall during plasma etching between both substrates. The temperature of n-SiC increases by radiative heating from the high-density plasma during etching because of the higher free-carrier absorption compared to SI-SiC. Furthermore, the negative charge buildup at the sidewall of SI-SiC becomes stronger because of the lower electrical conductivity compared to n-SiC.

36 MATERIALS SCIENCE↗

Gas temperature measurement in CF{sub 4}, SF{sub 6}, O{sub 2}, Cl{sub 2}, and HBr inductively coupled plasmas

Neutral gas temperature (T{sub g}) is measured in an industrial high-density inductively coupled etch reactor operating in CF{sub 4}, SF{sub 6}, O{sub 2}, Cl{sub 2}, or HBr plasmas. Two laser diodes are used to deduce T{sub g} from the Doppler widths of 772.38 and 811.5 nm lines absorbed by Ar*({sup 3}P{sub 2}) metastable atoms, when a small amount of argon (5%) is added to the gas flow. With the 811.5 nm beam passing parallel to the wafer, T{sub g} near the wafer surface is obtained by laser absorption technique. With the 772.38 nm beam entering the top of the reactor perpendicular to the wafer surface, the volume averaged temperature is deduced by laser induced fluorescence technique. The volume averaged T{sub g} increases with radio frequency power and with pressure, although the temperature near the walls is only weakly dependent on gas pressure. The main effect of increasing the pressure is an enhancement of the temperature gradient between the discharge center and the wall boundary. Due to the thermal accommodation, the authors always observe a significant temperature jump between the surface and the gas in its vicinity. This gap is typically about 200 K. Gas temperatures for a wide range of pressure and rf powers are reported. These data will be useful to validate and improve numerical models of high-density reactive plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface characterization of hydrophobic thin films deposited by inductively coupled and pulsed plasmas

Different fluorocarbon thin films were deposited on Si substrates using a plasma-polymerization method. Fluorine-containing hydrophobic thin films were obtained by inductively coupled plasma (ICP) and pulsed plasma (PP) with a mixture of fluorocarbon precursors C{sub 2}F{sub 6}, C{sub 3}F{sub 8}, and c-C{sub 4}F{sub 8} and the unsaturated hydrocarbons of C{sub 2}H{sub 2}. The influence on the fluorocarbon surfaces of the process parameters for plasma polymerization, including the gas ratio and the plasma power, were investigated under two plasma-polymerized techniques with different fluorocarbon gas precursors. The hydrophobic properties, surface morphologies, and chemical compositions were elucidated using water contact angle measurements, field emission-scanning electron microscope, x-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and time-of-flight secondary ion mass spectrometry (TOF-SIMS). In this study, the ICP technique provides coarser grained films and more hydrophobic surfaces as well as a higher deposition rate compared to the PP technique. XPS, FT-IR, and TOF-SIMS analyses indicated that the ICP technique produced more fluorine-related functional groups, including CF{sub 2} and CF{sub 3}, on the surface. From the curve-fitted XPS results, fluorocarbon films grown under ICP technique exhibited less degree of cross-linking and higher CF{sub 2} concentrations than those grown under PP technique.

36 MATERIALS SCIENCE↗

Inductively coupled plasma-reactive ion etching of InSb using CH{sub 4}/H{sub 2}/Ar plasma

InSb is an important material for optoelectronic devices. Most InSb devices are currently wet etched, and the etching geometries are limited due to the isotropic nature of wet etching. Inductively coupled plasma (ICP)-reactive ion etching (RIE) is a more desirable alternative because it offers a means of producing small anisotropic structures especially needed in large format infrared focal plane arrays. This work describes the novel use of ICP-RIE for fabricating InSb mesas with CH{sub 4}/H{sub 2}/Ar plasma and presents the influences of the process parameters on the etch rate and surface morphology. The parameters investigated include bias radio frequency power (50-250 W), %CH{sub 4} in H{sub 2} (10-50), argon (Ar) partial pressure (0-0.3 Pa with total pressure of 1.0 Pa), and total pressure (0.35-4 Pa). With the process parameters optimized in this investigated ranges, good etching results have been achieved with etch rates up to 80 nm/min, and etch features with sidewall angles of about 80 degree sign , the etched surface is as smooth as before the RIE process.

36 MATERIALS SCIENCE↗

Effect of Ar and N{sub 2} addition on CH{sub 4}-H{sub 2} based chemistry inductively coupled plasma etching of HgCdTe

Mercury cadmium telluride (MCT) CH{sub 4}-H{sub 2} based chemistry inductively coupled plasma (ICP) etching mechanisms are investigated. The effect of Ar and N{sub 2} addition in the mixture on plasma and MCT surface characteristics are studied by Langmuir probe, mass spectrometry, and x-ray photoelectron spectroscopy (XPS). In the authors' conditions, the HgTe faster removal than CdTe leads to the formation of a CdTe rich layer in the first 30 s of plasma exposure. Ion flux intensity and composition are only slightly influenced by N{sub 2} addition while a strong effect is shown on neutral species by the formation of NH{sub 3}, HCN, and the increase in CH{sub 3} radical density. At the opposite, Ar addition to the gas mixture leads to a total ion flux increase and promote CH{sub 3}{sup +} formation while small changes are observed on neutral species. In our low pressure and high density conditions, same order of magnitude of ion and neutral CH{sub 3} flux on MCT surface is found, suggesting a chemical contribution of CH{sub 3}{sup +} ions in MCT etching. This is confirmed by a strong correlation of the MCT etching yield versus total (neutral and ionic) CH{sub 3} flux. These results suggest that the etching is limited by the supply of CH{sub 3} to the surface.

36 MATERIALS SCIENCE↗

Etching characteristics and mechanism of indium tin oxide films in an inductively coupled HBr/Ar plasma

The investigations of etch characteristics and mechanisms for indium tin oxide (In{sub 2}O{sub 3}){sub 0.9}:(SnO{sub 2}){sub 0.1} (ITO) thin films using HBr/Ar inductively coupled plasma were carried out. The ITO etch rate was measured in the range of 0%-100% Ar in the HBr/Ar mixture at fixed gas pressure (6 mTorr), input power (700 W), and bias power (200 W). Plasma parameters and composition were examined with a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. It was found that the ITO etch rate follows the behavior of Br atom flux but contradicts with that for H atoms and positive ions. This suggests that the ITO etch process is not limited by the ion-surface interaction kinetics and appears in the reaction-rate-limited etch regime with the Br atoms as the main chemically active species.

36 MATERIALS SCIENCE↗

''SensArray'' voltage sensor analysis in an inductively coupled plasma

A commercially manufactured PlasmaVolt sensor wafer was studied in an inductively coupled plasma reactor in an effort to validate sensor measurements. A pure Ar plasma at various powers (25-420 W), for a range of pressures (10-80 mT), and bias voltages (0-250 V) was utilized. A numerical sheath simulation was simultaneously developed in order to interpret experimental results. It was found that PlasmaVolt sensor measurements are proportional to the rf-current through the sheath. Under conditions such that the sheath impedance is dominantly capacitive, sensor measurements follow a scaling law derived from the inhomogeneous sheath model of Lieberman and Lichtenberg, [Principles of Plasma Discharges and Materials Processing (Wiley, New York, 2005)]. Under these conditions, sensor measurements are proportional to the square root of the plasma density at the plasma-sheath interface, the one-fourth root of the electron temperature, and the one-fourth root of the rf bias voltage. When the sheath impedance becomes increasingly resistive, the sensor measurements deviate from the scaling law and tend to be directly proportional to the plasma density. The measurements and numerical sheath simulation demonstrate the scaling behavior as a function of changing sheath impedance for various plasma conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast and smooth etching of indium tin oxides in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas

The etching characteristics of evaporation-deposited indium tin oxide (ITO) films in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas have been studied. High etch rates >200 nm/min were obtained at large BCl{sub 3}/Cl{sub 2} gas flow ratios and high rf chuck powers, suggesting that the etching process is limited by sputter desorption of InCl{sub x} and SnCl{sub x} compounds. The addition of a small amount of CF{sub 4}, which acts as reducing agent, increased the etch rate by 30% and resulted in very smooth etched surfaces. It has also been found that the material crystallinity has a pronounced influence on ITO etch rate. ITO films annealed at 500 deg. C exhibited the maximum etch resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Etch mechanism of In{sub 2}O{sub 3} and SnO{sub 2} thin films in HBr-based inductively coupled plasmas

The investigations of etch characteristics and mechanisms for both In{sub 2}O{sub 3} and SnO{sub 2} thin films in the HBr-based inductively coupled plasmas were carried out. The etch rates were measured as functions of gas mixing ratio (0%-100% Ar), input power (400-700 W), and gas pressure (4-10 mTorr) at fixed bias power (200 W) and gas flow rate [40 SCCM (SCCM denotes cubic centimeter per minute at STP)]. Plasma parameters and composition were determined using a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. The correlations between the behaviors of etch rates and fluxes of plasma active species allow one to infer both In{sub 2}O{sub 3} and SnO{sub 2} etch mechanisms as the transitional regime of ion-assisted chemical reaction, which is controlled by neutral and charged fluxes together.

36 MATERIALS SCIENCE↗