SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS2015

An Experimental Investigation of the Flow Physics Associated With End Wall Losses and Large Rotor Tip Clearances as Found in the Rear Stages of a High Pressure Compressor

The focus of this work was to characterize the fundamental flow physics and the overall performance effects due to increased rotor tip clearance heights in axial compressors. Data have been collected in the three-stage axial research compressor at Purdue University with a specific focus on analyzing the multistage effects resulting from the tip leakage flow. Three separate rotor tip clearance heights were studied with nominal tip clearance heights of 1.5%, 3.0%, and 4.0% based on a constant annulus height. Overall compressor performance was investigated at four corrected speedlines (100%, 90%, 80%, and 68%) for each of the three tip clearance configurations using total pressure and total temperature rakes distributed throughout the compressor. The results have confirmed results from previous authors showing a decrease of total pressure rise, isentropic efficiency, and stall margin which is approximately linear with increasing tip clearance height. The stall inception mechanisms have also been evaluated at the same corrected speeds for each of the tip clearance configurations. Detailed flow field measurements have been collected at two loading conditions, nominal loading (NL) and high loading (HL), on the 100% corrected speedline for the smallest and largest tip clearance heights (1.5% and 4.0%). Steady detailed radial traverses of total pressure at the exit of each stator row have been supported by flow visualization techniques to identify regions of flow recirculation and separation. Furthermore, detailed radial traverses of time-resolved total pressures at the exit of each rotor row have been measured with a fast-response pressure probe. These data have helped to quantify the size of the leakage flow at the exit of each rotor. Thermal anemometry has also been implemented to evaluate the time-resolved three-dimensional components of velocity throughout the compressor and calculate blockage due to the rotor tip leakage flow throughout the compressor. These measurements have also been used to calculate streamwise vorticity. Time-resolved static pressure measurements have been collected over the rotor tips for all rotors with each of the three tip clearance configurations for up to five loading conditions along the 100% corrected speedline using fast-response piezoresistive pressure sensors. These time-resolved static pressure measurements, as well as the time-resolved total pressures and velocities have helped to reveal a profound influence of the upstream stator vane on the size and shape of the rotor tip leakage flow. Finally, a novel particle image velocimetry (PIV) technique has been developed as a proof-of- concept. In contrast to PIV methods that have been typically been utilized for turbomachinery applications in the past, the method used for this study introduced the laser light through the same access window that was also used to image the flow. This new method addresses potential concerns related to the intrusive laser-introducing techniques that have typically been utilized by other authors in the past. Ultimately, the data collected for this project represent a unique data set which contributes to build a better understanding of the tip leakage flow field and its associated loss mechanisms. These data will facilitate future engine design goals leading to small blade heights in the rear stages of high pressure compressors and aid in the development of new blade designs which are desensitized to the performance penalties attributed to rotor tip leakage flows.

Berdanier, Reid A.↗

NASA NTRS2021

Mangrove Carbon Stocks in Pongara National Park, Gabon

Mangroves are recognized for their valued ecosystem services to coastal areas, and the functional linkages between those services and ecosystem carbon stocks have been established. However, spatially explicit inventories are necessary to facilitate management and protection of mangroves, as well as providing a foundation for payment for ecosystem service programs such as REDD+. We conducted an inventory of carbon stocks in mangroves within Pongara National Park (PNP), Gabon using a stratified random sampling design based on forest canopy height derived from TanDEM-X remote sensing data. Ecosystem carbon pools, including aboveground and belowground biomass and necromass, and soil carbon to a depth of 2 m were assessed using measurements and samples from plots distributed among three canopy height classes within the park. There were two mangrove species within the inventory area in PNP, Rhizophora racemosa and R. harrisonii. R. harrisonii was predominant in the sparse, low-stature stands that dominated the west side of the park. In the east side of the park, both species occurred in tall-stature stands, with tree height often exceeding 30 m. Canopy height was an effective means to stratify the inventory area, as biomass was significantly different among the height classes. Despite those differences in aboveground biomass, the soil carbon density was not significantly different among height classes. Soils were the main component of the ecosystem carbon stock, accounting for over 84% of the total. The ecosystem carbon density ranged from 644 to 943 Mg C ha−1 among the three height classes. The ecosystem carbon stock within PNP is estimated to be 40,588 Gg C. The combination of pre-inventory information about stand conditions and their spatial distribution within the assessment area obtained from remote sensing data and a spatial decision support system were fundamental to implementing this relatively large-scale field inventory. This work exemplifies how mangrove carbon stocks can be quantified to augment national C reporting statistics, provide a baseline for projects involving monitoring, reporting and verification (i.e., MRV), and provide data on the forest composition and structure for sustainable management and conservation practices.

Carl C Trettin↗

NASA NTRS2021

Comprehensive Comparison of Airborne and Spaceborne SAR and LiDAR Estimates of Forest Structure in the Tallest Mangrove Forest on Earth

A recent suite of new global-scale satellite sensors and regional-scale airborne campaigns are providing a wealth of remote sensing data capable of dramatically advancing our current understanding of the spatial distribution of forest structure and carbon stocks. However, a baseline for forest stature and biomass estimates has yet to be established for the wide array of available remote sensing products. At present, it remains unclear how the estimates from these sensors compare to one another in terrestrial forests, with a clear dearth of studies in high carbon density mangrove ecosystems. In the tallest mangrove forest on Earth (Pongara National Park, Gabon), we leverage the data collected during the AfriSAR campaign to evaluate 17 state-of-the-art sensor data products across the full range of height and biomass known to exist globally in mangrove forest ecosystems, providing a much-needed baseline for sensor performance. Our major findings are: (Houghton, Hall, Goetz) height estimates are not consistent across products, with opposing trends in relative and absolute errors, highlighting the need for an adaptive approach to constraining height estimates (Panet al., 2011); radar height estimates had the lowest calibration error and bias, with further improvements using LiDAR fusion (Bonan, 2008); biomass variability and uncertainty strongly depends on forest stature, with variation across products increasing with canopy height, while relative biomass variation was highest in low-stature stands (Le Quéréet al., 2017); a remote sensing product's sensitivity to variations in canopy structure is more important than the absolute accuracy of height estimates (Mitchardet al., 2014); locally-calibrated area-wide totals are more representative than generalized global biomass models for high-precision biomass estimates. The findings presented here provide critical baseline expectations for height and biomass predictions across the full range of mangrove forest stature, which can be directly applied to current (TanDEM-X, GEDI, ICESat-2) and future (NISAR, BIOMASS) global-scale forest monitoring missions.

Atticus E.L. Stovall↗

NASA NTRSDate not supplied

Inferred Sea Level Prediction in the NASA GMAO Seasonal Forecasting System

Reliable predictions of sea level anomalies on seasonal timescales with lead times of 1 to 9 months may have relevance to stakeholders – for example, in the advance deployment of resources for coastal flood mitigation. Routine prediction and analysis may also highlight physical processes associated with sea level change and modeling capabilities on seasonal and other timescales. These forecasts may represent interannual changes in the seasonal slope of the ocean surface, teleconnection effects such as the El Niño/Southern Oscillation phenomenon, and variations in seasonal hydrology including precipitation and coastal runoff. Coupled atmosphere/ocean models are routinely used in the seasonal prediction of temperature anomalies, precipitation anomalies, sea ice cover, and climate indices such as the Niño3.4 predictions under the North American Multi-Model Ensemble (NMME) protocol. Within the limits of their configuration, these complex Earth-system models have a potential for depicting regional changes in oceanic column properties, including the sea surface height. Seasonal prediction models generally have no representation of long-term mass contributions from melting land ice, or changes in vertical land motion; their output may be more specifically characterized as predictions of the ocean dynamic sea level. In practice however, the sea surface height prognostic variable is substantially compromised by the forecast model response to initial conditions. Imbalances between the initial, observed hydrologic cycle and the forecast model state produce abrupt adjustments in the model sea surface height. As a result, most seasonal prediction systems employ a constraint on the globally-averaged sea surface height that is applied at each time step. This essentially renders the prognostic sea surface height variable as unserviceable. Several approaches have previously been used to retrieve sea level information from seasonal forecasts beyond the use of the sea surface height variable. Here, we extend a method of relating other prognostic values, including ocean circulation and climate indices, to observed sea level variations. We use the merged altimetry record of the NASA MEaSUREs Gridded Sea Surface Height Anomalies data set and monthly revised local reference gauge observations from the National Oceanography Centre Permanent Service for Mean Sea Level (PSMSL) to evaluate derived prognostic variables from the NASA Global Modeling and Assimilation Office subseasonal-to-seasonal system version 2.1 (GMAO S2S v2.1). We focus on results for the midlatitudes with particular emphasis on US gauge locations. As shown in previous studies, prognostic ENSO-related indices in boreal winter are well correlated with gauge observations for the US west coast, but also for other locations in the southeastern US. Other forecast climate indices such as the North Atlantic Oscillation have relations to sea level that are limited both seasonally and spatially. As expected, surface atmospheric pressure (e.g., inverse barometer effect) is found to be particularly well correlated with observed sea level. We provide a characterization of forecast skill for seasonal sea level with this method.

Richard I Cullather↗

NASA NTRS1973

Geodetic analysis of Skylab altimetry preliminary data - SL/2 EREP pass 9

The author has identified the following significant results. The analysis was based on a time series intrinsic relationship between the satellite ephemeris, altimeter measured ranges, and the corresponding a priori values of subsatellite geoidal heights. Using sequential least squares processing with parameter weighting, the objective was to recover (1) the absolute geoidal heights of the subsatellite points, and (2) the associated altimeter calibration constant(s). Preliminary results from Skylab altimetry are given, using various combinations of orbit ephemeris and altimeter ranges as computed differently by NASA/JSC and NASA/Wallops. The influences of orbit accuracy, weighting functions, and a priori ground truth are described, based on the various combination solutions. It is shown that to deduce geoidal height by merely subtracting the height of the satellite from the altimeter range is inadmissible. The results of such direct subtraction can be very misleading if the orbit used is computed from data that included altimeter data used as height constraints. In view of the current state of knowledge, the use of geodetic ground truth samples as control benchmarks appears indispensable for the recovery of absolute geoidal heights with correct scale.

Mourad, A. G.↗

NASA NTRS1983

A comparison between backscattering coefficients using Gaussian and non-Gaussian surface statistics

Backscattering coefficients computed using Gaussian and non-Gaussian surface statistics are compared. The computations are performed for a class of surface-height distributions and surface correlation functions. Results indicate that the coherent component of the scattering coefficient is strongly dependent upon the surface-height distribution. The noncoherent component also depends on the surface-height distribution and the surface root-mean-square (rms) slope when the rms surface height is large relative to the incident wavelength. On the other hand, when the surface rms height is moderate or small, the noncoherent component is sensitive mainly to the surface-height correlation function.

Eom, H. J.↗

NASA NTRS1984

Teleconnection patterns in the Southern Hemisphere

Contemporaneous correlations between geopotential heights on a given pressure surface at widely separated points on Earth, commonly referred to as teleconnections, are calculated from monthly mean sea level pressure and 500 mb geopotential height analyses for the Southern Hemisphere for five-month winter and summer seasons. During summer (November-March), anomalies over the three continents occur out of phase with anomalies over the subtropical oceans and in a wavenumber 3 pattern over the Southern Ocean near 55 deg S. The subtropical part of the pattern appears largely associated with the interannual variation of the seasonal cycle and annual mean. In winter (May-September) 500 mb geopotential heights over Africa exhibit positive correlations with heights over South America and the central South Pacific near New Zealand and negative correlations with height over the Southern Ocean. A striking wavenumber three pattern is apparent which shows the correlation of 500 mb geopotential height anomalies with 500 mb anomalies at 50 deg S, 95 deg E during winter. The strong positive correlations between 50 deg S, 95 E and 58 deg S, 150 deg W and 38 deg S, 15 deg W contrast with negative correlations over Antarctica and in low latitudes. Time variations in a similar pattern in sea level pressure are in phase with variations in the 500 mb pattern, suggesting an equivalent barotropic structure.

Mo, K. C.↗

NASA NTRS1984

Partial Reflection D-region Electron Densities

The differential absorption technique of measuring electron densities as a function of height in the D region is discussed. In the basic experiment, pulses of medium or high frequency, usually at a fixed frequency (2 to MHz), are radiated upwards with known wave polarizatin (usually linear or circular) from a transmitter at ground level. Partial reflections, from ionospheric scatterers at heights below the E region, are received at the ground, and are resolved into two characteristic components, the ordinary (0) and extraordinary (E) modes whose amplitude ration A(x)/A(o) is then measured as a function of height, h. The heights of these are determined by delay times, the group retardation being minimal in the undisturbed D-region. The electronic system can be very simple. Power splitters and quadrature networks to separate the A(x) and A(o) components are commercially available at low prices and an A-D converter, height-gate system, and microcomputer allows the real-time calculation of mean amplitudes. The ratio of the coefficients of reflection of the two modes, as they originate at each reflection height is then calculable.

Manson, A. H.↗

NASA NTRS1984

Measurement of the Vertical Gradient of the Semidiurnal Tidal Wind Phase in Winter at the 95 Km Level

When supplemented by absolute reflection height measurements, low frequency wind measurements in the 90-100 km height range become truly competitive in comparison with the more widely used radar meteor wind observations. For example, height profiles of the wind parameters in the so-called meteor zone can be obtained due to the considerable interdiurnal variability of the average nighttime reflection heights controlled by geomagnetic activity. The phase of the semidiurnal tidal wind is particularly height-dependent. The measured vertical gradient of 1/4 h/km in winter corresponds to a vertical wavelength of about 50 km. Wind measurements in the upper atmosphere, at heights between 90 and 100 km, were carried out at the Collm Geophysical Observatory of Karl Marx University Leipzig for a number of years. These measurements use the closely-spaced receiver method and three measuring paths, on 179, 227, and 272 kHz. They take place every day between sunset and sunrise, i.e., nightly. A night in this sense may last as long as 18 hours in winter. Both the measurements and their evaluation are completely automatic, and the prevailing winds and tides are separated.

Schminder, R.↗

NASA NTRS1990

Cloud and boundary layer structure over San Nicolas Island during FIRE

The temporal evolution of the structure of the marine boundary layer and of the associated low-level clouds observed in the vicinity of the San Nicolas Island (SNI) is defined from data collected during the First ISCCP Regional Experiment (FIRE) Marine Stratocumulus Intense Field Observations (IFO) (July 1 to 19). Surface, radiosonde, and remote-sensing measurements are used for this analysis. Sounding from the Island and from the ship Point Sur, which was located approximately 100 km northwest of SNI, are used to define variations in the thermodynamic structure of the lower-troposphere on time scales of 12 hours and longer. Time-height sections of potential temperature and equivalent potential temperature clearly define large-scale variations in the height and the strength of the inversion and periods where the conditions for cloud-top entrainment instability (CTEI) are met. Well defined variations in the height and the strength of the inversion were associated with a Cataline Eddy that was present at various times during the experiment and with the passage of the remnants of a tropical cyclone on July 18. The large-scale variations in the mean thermodynamic structure at SNI correlate well with those observed from the Point Sur. Cloud characteristics are defined for 19 days of the experiment using data from a microwave radiometer, a cloud ceilometer, a sodar, and longwave and shortwave radiometers. The depth of the cloud layer is estimated by defining inversion heights from the sodar reflectivity and cloud-base heights from a laser ceilometer. The integrated liquid water obtained from NOAA's microwave radiometer is compared with the adiabatic liquid water content that is calculated by lifting a parcel adiabatically from cloud base. In addition, the cloud structure is characterized by the variability in cloud-base height and in the integrated liquid water.

Albrecht, Bruce A.↗

NASA NTRS1991

Sea ice ridging in the eastern Weddell Sea

Measurements of sea ice ridge heights and spatial frequency in the eastern Weddell Sea using a shift-based acoustical sounder are reported. A total of 933 ridges were measured along a track length of 415 km using a minimum ridge sail height of 0.75 m. The ridge frequency varied from 0.4 to 10.5 ridges per km. The mean height of the ridges was found to be about 1.1 m regardless of the ridge frequency. These results are compared to other ridging statistics from the Ross Sea and found to be similar. Comparison with Arctic data indicates that the height and frequency of the ridges are considerably less in the Weddell Sea than in the Arctic. Whereas in the Arctic, the mean ridge height tends to increase with the ridge frequency, this was not found to be the case in the Weddell Sea, where the mean ridge height remained constant irrespective of the ridge frequency. Estimates of the contribution of deformed ice to the total ice thickness are generally low except for a single 53-km section where the ridge frequency increased by an order of magnitude.

Lytle, V. I.↗

NASA NTRS1991

Mean flow and variability in the Kuroshio Extension from Geosat altimetry data

The mean flow and temporal and spatial variations of the Kuroshio Extension in the region of 140-180 deg E and 30-40 deg N are investigated using altimeter data from the Geosat Exact Repeat Mission (ERM). Mean surface height profiles are estimated along individual tracks by assuming the velocity profile of the Kuroshio Extension to be Gaussian-shaped and by successively fitting this synthetic current's height profile to the residual height data. The mean profiles from ascending and descending tracks are used to derive the mean surface height by an inverse method and to obtain the absolute surface height fields for the first 2.5 yr of the Geosat ERM. Both the mean and the instantaneous height fields thus derived compare well with the available hydrographic data and the SST patterns from the NOAA satellites. Effects of deep mean flow and baroclinic shear are found to be important in explaining the observed propagation speeds.

Qiu, BO↗

NASA NTRS1992

Lower stratosphere waves during 1986-1989 southern springs

Global NMC height analyses and Nimbus 7 TOMS Grid-T Version 6 data are used to investigate the horizontal structure of ozone and 50-mb height waves for the 1986-1989 springs of the Southern Hemisphere. Empirical orthogonal functions (EOFs) are obtained for the ozone and height data independently to identify the meridional structure of observed long waves as well as their propagation characteristics. The leading EOFs for both the ozone and 50-mb height waves exhibit wavenumber 1 and 2 patterns. The correlation coefficients between ozone and 50-mb height principal components are high. They indicate high/low ozone values associated with high/low values of 50-mb heights. This distribution is consistent with the advection of ozone by planetary waves south of the ozone maximum, as shown by a simple linear wave model. The observed total ozone amplitudes for waves 1 and 2 for most years are consistent with the total ozone predictions by the wave model.

Nogues-Paegle, Julia↗

NASA NTRS1994

Calibration of the TOPEX altimeter using a GPS buoy

The use of a spar buoy equipped with a Global Positioning System (GPS) antenna to calibrate the height measurement of the TOPEX radar altimeter is described. In order to determine the height of the GPS antenna phase center above the ocean surface, the buoy was also equipped with instrumentation to measure the instantaneous location of the waterline, and tilt of the bouy from vertical. The experiment was conducted off the California coast near the Texaco offshore oil platform, Harvest, during cycle 34 of the TOPEX/POSEIDON observational period. GPS solutions were computed for the bouy position using two different software packages, K&RS and GIPSY-OASIS II. These solutions were combined with estimates of the waterline location on the bouy to yield the height of the ocean surface. The ocean surface height in an absolute coordinate system combined with knowledge of the spacecraft height from tracking data provides a computed altimeter range measurement. By comparing this computed value to the actual altimeter measurement, the altimeter bias can be calibrated. The altimeter height bias obtained with the buoy using K&RS was -14.6 +/- 4 cm, while with GIPSY-OASIS II it was -13.1 +/- 4 cm. These are 0.1 cm and 1.6 cm different from the -14.7 +/- 4 cm result obtained for this flight overflight with the tide gauge instruments located on Platform Harvest.

Born, G. H.↗

NASA NTRS1998

Influence of Subpixel Scale Cloud Top Structure on Reflectances from Overcast Stratiform Cloud Layers

Recent observational studies have shown that satellite retrievals of cloud optical depth based on plane-parallel model theory suffer from systematic biases that depend on viewing geometry, even when observations are restricted to overcast marine stratus layers, arguably the closest to plane parallel in nature. At moderate to low sun elevations, the plane-parallel model significantly overestimates the reflectance dependence on view angle in the forward-scattering direction but shows a similar dependence in the backscattering direction. Theoretical simulations are performed that show that the likely cause for this discrepancy is because the plane-parallel model assumption does not account for subpixel, scale variations in cloud-top height (i.e., "cloud bumps"). Monte Carlo simulation, comparing ID model radiances to radiances from overcast cloud field with 1) cloud-top height variation, but constant cloud volume extinction; 2) flat tops but horizontal variations in cloud volume extinction; and 3) variations in both cloud top height and cloud extinction are performed over a approximately equal to 4 km x 4 km domain (roughly the size of an individual GAC AVHRR pixel). The comparisons show that when cloud-top height variations are included, departures from 1D theory are remarkably similar (qualitatively) to those obtained observationally. In contrast, when clouds are assumed flat and only cloud extinction is variable, reflectance differences are much smaller and do not show any view-angle dependence. When both cloud-top height and cloud extinction variations are included, however, large increases in cloud extinction variability can enhance reflectance difference. The reason 3D-1D reflectance differences are more sensitive to cloud-top height variations in the forward-scattering direction (at moderate to low, sun elevations) is because photons leaving the cloud field in that direction experience fewer scattering events (low-order scattering) and are restricted to the topmost portions of the cloud. While reflectance deviations from 1D theory are much larger for bumpy clouds than for flat clouds with variable cloud extinction, differences in cloud albedo are comparable for these two cases.

Loeb, N. G.↗

NASA NTRS2003

MGS Radio Science Electron Density Profiles: Interannual Variability and Implications for the Martian Neutral Atmosphere

Martian electron density profiles provided by the Mars Global Surveyor (MGS) Radio Science (RS) experiment over the 95-200 km altitude range indicate that the height of the electron peak and the longitudinal structure of the peak height are sensitive indicators of the physical state of the Mars lower atmosphere. The present analysis is carried out on five sets of occultation profiles, all at high solar zenith angles (SZA). Variations spanning 2-Martian years are investigated near aphelion conditions at high Northern latitudes (64.7-77.6N). A mean ionospheric peak height of 133.5-135 km was obtained for all aphelion profiles near SZA = 78-82; a corresponding mean peak density of 7.3-8.5 x 10(exp 4)/cu cm was also measured, reflecting solar moderate conditions. Strong wave 2-3 oscillations in peak heights were observed as a function of longitude over both Martian seasons. The Mars Thermospheric General Circulation Model (MTGCM) is exercised for Mars aphelion conditions. The measured interannual variations in the mean and longitude structure of the peak heights are small (consistent with MTGCM simulations), signifying the repeatability of the Mars atmosphere during aphelion conditions. A non-migrating (semi-diurnal period, wave#l eastward propagating) tidal mode is likely responsible for the wave#3 longitude features identified. The height of this photochemically driven peak can be observed to provide an ongoing monitor of the changing state of the Mars lower atmosphere. The magnitudes of these same peaks may reflect more than changing solar EUV fluxes when they are located in the vicinity of Mars crustal magnetic field centers.

Bougher, Stephen W.↗

NASA NTRS2003

Simultaneous Ocean Wave Measurements by the JASON and TOPEX Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the WaveWatch 111 operational model. The rms difference between Jason and Topex wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding Topex by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 3% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.

Ray, R. D.↗

NASA NTRS2004

Atmospheric and Surface Reflectance Measurements by the Geoscience Laser Altimeter System

The Geoscience Laser Altimeter System launched in early 2003 is the first satellite instrument IC space to globally observe the distribution of clouds and aerosol through laser remote sensing. The instrument is a basic backscatter lidar that operates at two wavelengths, 532 and 1064 nm. The mission data products for atmospheric observations include the calibrated, observed, attenuated backscatter cross section for cloud and aerosol; height detection for multiple cloud layers; planetary boundary layer height; cirrus and aerosol optical depth and the height distribution of aerosol and cloud scattering cross section profiles. The data will enhance knowledge in several areas of atmospheric science: the distribution, transport and influence of atmospheric aerosol, significantly more accurate measurements of the coverage and height of cirrus and other clouds, polar cloud climatology and radiation influence, the dynamics planetary boundary layer and others. An overview and summary of initial results are presented. Initial results from the first months of operation show the detailed height structure of clouds and aerosol on a global basis as expected. The 532 nm channel was expected to be the more sensitive and primary channel for aerosol measurements, but extensive aerosol loading in many regions are observed by the 1064 nm channel. Sensitivities are down to a few times l0(exp 6) l/(m-sr), much better than originally expected. The 532 channel adds an order of magnitude addition sensitivity. Initial comparisons to aerosol models have been done. Similarly for global cloud cover, good results are obtained just from the 1064 nm channel and from both channels, a measurement of multiple layers and cloud overlap has been made. Antarctica observations show high levels of total cloud cover including unique low-level cirrus and blowing snow. Data products have been generated for cloud, aerosol and PBL presence and heights in addition to the basic scattering cross section profiles.

Spinhirne, James D.↗