Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Geological and geothermal investigations for HCMM-derived data

An attempt was made to match HCMM- and U2HCMR-derived temperature data over two test sites of very local size to similar data collected in the field at nearly the same times. Results indicate that HCMM investigations using resolutions cells of 500 m or so are best conducted with areally-extensive sites, rather than point observations. The excellent quality day-VIS imagery is particularly useful for lineament studies, as is the DELTA-T imagery. Attempts to register the ground observed temperatures (even for 0.5 sq mile targets) were unsuccessful due to excessive pixel-to-pixel noise on the HCMM data. Several computer models were explored and related to thermal parameter value changes with observed data. Unless quite complex models, with many parameters which can be observed (perhaps not even measured (perhaps not even measured) only under remote sensing conditions (e.g., roughness, wind shear, etc) are used, the model outputs do not match the observed data. Empirical relationship may be most readily studied.

Lyon, R. J. P.↗

Performance evaluation and geologic utility of LANDSAT-4 TM and MSS data

Radiometric calibration accuracy of TM data, radiometric comparison of A-, B-, and P-format data, and geometric registration accuracy of the TM data at enlarged scales were analyzed. Radiometric analysis of the Wind River Basin, Wyoming scene demonstrates that the TM system can be used to extract image reflectance spectra from ground targets following calibration of the system. It was also demonstrated that: (1) image DN (radiance values) vs. ground reflectance calibration scatterplots yield parameters which can be used to constrain atmospheric models and can determine TM radiometric sensitivity; (2) no significant degradation occurs as a result of radiometric and geometric correction by SCROUNGE processing; and (3) TM data can be enlarged to 1:24000 with no major geometric distortions or misregistration problems to USGS topographic maps.

Paylor, E. D.↗

Geologic and mineral and water resources investigations in western Colorado using ERTS-1 data

The author has identified the following significant results. Most of the geologic information in ERTS-1 imagery can be extracted from bulk processed black and white transparencies by a skilled interpreter using standard photogeologic techniques. In central and western Colorado, the detectability of lithologic contacts on ERTS-1 imagery is closely related to the time of year the imagery was acquired. Geologic structures are the most readily extractable type of geologic information contained in ERTS images. Major tectonic features and associated minor structures can be rapidly mapped, allowing the geologic setting of a large region to be quickly accessed. Trends of geologic structures in younger sedimentary appear to strongly parallel linear trends in older metamorphic and igneous basement terrain. Linears and color anomalies mapped from ERTS imagery are closely related to loci of known mineralization in the Colorado mineral belt.

Knepper, D. H.↗

An overview of Venus geology

The Magellan spacecraft is producing comprehensive image and altimetry data for the planet Venus. Initial geologic mapping of the planet reveals a surface dominated by volcanic plains and characterized by extensive volcanism and tectonic deformation. Geologic and geomorphologic units include plains terrains, tectonic terrains, and surficial material units. Understanding the origin of these units and the relation between them is an ongoing task of the Magellan team.

Saunders, R. Stephen↗

Airphoto Interpretation and the Selection of a Powerchain Right-of-way in Vermont

The analysis of 1:42,000 scale color infrared aerial photographs was performed to acquire data on land use, wetlands, geology, population distribution, and transportation for the purpose of locating a high voltage powerline. Maps and reference literature augmented these data with information concerning historic sites, biologically or geologically sensitive areas, planning, and zoning. With the combined data, twenty-nine corridor segments, one mile wide and varying lengths were identified.

Klunder, H.↗

Data request for Majiata DCL plant site characterization for geological sequestration - explanation of purpose and need

Detailed and accurate geological assessment of the proposed CO2 pilot injection and commercial project associated with Shenhua’s DCL plant is central to project success and US-China collaboration. The best result requires access to multiple data types and in the highest abundance available for the site and region. Insufficient data access will result in inaccurate simulations, poor drilling recommendations, high uncertainty in understanding new data from the site, and would increase the chance of technical failure or poor outcome. Examples from prior successful project discussed here are provided to demonstrate the need for full access to individual data types, access to multiple data types, and ability to correlate and integrate between these data sets.

58 GEOSCIENCES↗

Geologic Mapping of the Lunar South Pole, Quadrangle LQ-30: Volcanic History and Stratigraphy of Schroedinger Basin

In this study we use recent images and topographic data to map the geology and geomorphology of the lunar South Pole quadrangle (LQ-30) at 1:2.5M scale [1-4] in accordance with the Lunar Geologic Mapping Program. Mapping of LQ-30 began during Mest's postdoctoral appointment and has continued under the PG&G Program, from which funding became available in February 2009. Preliminary map-ping and analyses have been done using base materials compiled by Mest, but properly mosaicked and spatially registered base materials are being compiled by the USGS and should be received by the end of June 2009. The overall objective of this research is to constrain the geologic evolution of the lunar South Pole (LQ-30: 60deg -90deg S, 0deg - +/-180deg ) with specific emphasis on evaluation of a) the regional effects of basin formation on the structure and composition of the crust and b) the spatial distribution of ejecta, in particular resulting from formation of the South Pole-Aitken (SPA) basin and other large basins. Key scientific objectives include: 1) Constraining the geologic history of the lunar South Pole and examining the spatial and temporal variability of geologic processes within the map area. 2) Constraining the vertical and lateral structure of the lunar regolith and crust, assessing the distribution of impact-generated materials, and determining the timing and effects of major basin-forming impacts on crustal structure and stratigraphy in the map area. And 3) assessing the distribution of resources (e.g., H, Fe, Th) and their relationships with surface materials.

Mest, S. C.↗

Merging high resolution geophysical and geochemical surveys to reduce exploration risk at glass buttes, Oregon

The engineering and studies phase of the Glass Buttes project was aimed at reducing risk during the early stages of geothermal project development. The project’s inclusion of high resolution geophysical and geochemical surveys allowed Ormat to evaluate the value of these surveys both independently and in combination to quantify the most valuable course of action for exploration in an area where structure, permeability, and temperature are the most pressing questions. The sizes of the thermal anomalies at Glass Buttes are unusually large. Over the course of Phase I Ormat acquired high resolution LIDAR data to accurately map fault manifestations at the surface and collected detailed gravity and aeromagnetic surveys to map subsurface structural features. In addition, Ormat collected airborne hyperspectral data to assist with mapping the rock petrology and mineral alteration assemblages along Glass Buttes faults and magnetotelluric (MT) survey to try to better constrain the structures at depth. Direct and indirect identification of alteration assemblages reveal not only the geochemical character and temperature of the causative hydrothermal fluids but can also constrain areas of upflow along specific fault segments. All five datasets were merged along with subsurface lithologies and temperatures to predict the most likely locations for high permeability and hot fluids. The Glass Buttes temperature anomalies include 2 areas, totaling 60 km2 (23 mi2) of measured temperature gradients over 165° C/km (10° F/100ft). The Midnight Point temperature anomaly includes the Strat-1 well with 90°C (194 °F) at 603 m (1981 ft) with a 164 °C/km (10°F/100ft) temperature gradient at bottom hole and the GB-18 well with 71°C (160 °F) at 396 m (1300 ft) with a 182°C/km (11°F/100ft) gradient. The primary area of alteration and elevated temperature occurs near major fault intersections associated with Brothers Fault Zone and Basin and Range systems. Evidence for faulting is observed in each data set as follows. Field observations include fault plane orientations, complicated fault intersections, and hydrothermal alteration apparently pre-dating basalt flows. Geophysical anomalies include large, linear gradients in gravity and aeromagnetic data with magnetic lows possibly associated with alteration. Resistivity low anomalies also appear to have offsets associated with faulting. Hyperspectral and XRF identified alteration and individual volcanic flow units, respectively. When incorporated into a 3D geologic model, the fault intersections near the highest proven temperature and geophysical anomalies provide the first priority targets at Midnight Point. Ormat geologists selected the Midnight Point 52-33 drilling target based on a combination of pre-existing drilling data, geologic field work, geophysical interpretation, and geochemical analysis. Deep temperatures of well 52-33 was lower than anticipated. Temperature gradients in the well mirrored those found in historical drilling, but they decreased below 1500 ft and were isothermal below 2000 ft.

15 GEOTHERMAL ENERGY↗

A geological investigation of the Taurus-Littrow Valley

The geological characteristics of the Taurus-Littrow region in the mountainous southeastern ring of the great plain of the Mare Serenitatis are presented. The major geologically defined units within the valley and the mountains surrounding it were examined during the Apollo 17 mission. The data obtained during the geological analysis are presented. Photographs of the significant formations are included. The specific nature of the rock formations and the stratigraphy of the area are discussed.

Schmitt, H. H.↗

NRAP-open-IAM: A flexible open-source integrated-assessment-model for geologic carbon storage risk assessment and management

Large-scale implementation of geologic carbon storage (GCS) to help reduce atmospheric greenhouse gas emissions requires stakeholder confidence that injected CO2 will remain contained and that potential subsurface environmental risks are acceptably small and manageable. The U.S. Department of Energy’s National Risk Assessment Partnership (NRAP) has developed an open-source integrated assessment model (NRAP-Open-IAM) to help address questions about a potential GCS site’s ability to effectively contain injected CO 2 and protect groundwater and other overlying environmentally sensitive receptors. NRAP-Open-IAM allows a user to: (1) incorporate relevant site geologic and injection scenario data; (2) characterize important site features and events;(3) couple fast prediction models of various system components of the engineered geologic system; and (4) execute stochastic, dynamic simulation of whole GCS system performance, leakage risk assessment, and uncertainty quantification. NRAP-Open-IAM is available on GitLab (https://gitlab.com/NRAP/OpenIAM), and is accompanied by multiple application examples and detailed user and developer guides.

54 ENVIRONMENTAL SCIENCES↗

Montana Water Resources II: Enhancing a Moisture Index for Drought and Flood Monitoring in the Missouri River Basin

The Missouri River Basin is a major global breadbasket, containing large amounts of agricultural land. Recent devastating weather events have motivated regional organizations to dedicate efforts to drought and flood monitoring and early warning systems. The DEVELOP team partnered with the following organizations: Montana Climate Office, NOAA National Weather Service (NWS) Missouri Basin River Forecast Center, NOAA Regional Climate Services of the Central Region, NOAA Physical Sciences Laboratory, and the US Army Corps of Engineers' Missouri River Basin Water Management Division. The team collaborated with the partners in their efforts to monitor flood and drought by enhancing a composite moisture index (CMI) for the Missouri River Basin. The CMI leverages NASA Earth observations to derive snow cover data from the Terra Moderate Resolution Imaging Spectroradiometer (MODIS) mission and snow water equivalent and snowdepth datasets from the NOAA NWS National Operational Hydrologic Remote Sensing Center’s Snow Data Assimilation System (SNODAS). Building upon this framework, the team added groundwater storage data from the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On missions, soil moisture data from Soil Moisture Active Passive (SMAP), and United States Geological Survey in situ streamflow data to the CMI. To test the tool’s validity, the team compared the CMI results to historically extreme dry and extreme wet years, March 2017 and March 2019, respectively. The CMI accurately reflects both 2017 and 2019 climate conditions in the Missouri River Basin. The refined CMI enhances the understanding of antecedent soil moisture conditions and improves flood and drought forecasting in the Missouri River Basin before the growing season.

Chloe Schneider↗

Planetary astronomy of Mars. Mars data reduction

Grant #NAGW-1408 was specifically awarded to obtain telescopic visible and near-IR spectral imaging of Mars during the 1988 apparition (9/28/88). The observing program was highly successful producing approximately 2 Gbytes of data, but was only funded for one year and virtually all of the funds were spent in data acquisition. The follow-up grant was funded the following year for reduction of these data into a scientifically productive form, which because of the size and nature of our observations, was a non-trivial task. A more detailed scientific analysis of these data (fully reduced) is in progress now and will take a number of years. Extended geologic analyses of the astronomical data are being funded by the NASA Planetary Geology and Geophysics program. The objective was to produce detailed reflectance spectra for contiguous, spatially resolved surface elements covering most of the planet (about +50 degrees to -90 degrees latitude, all longitudes). A total of 6 observing runs, of 3-4 days duration each, were conducted on the University of Arizona's 1.5m telescope on Mt. Bigelow. We present a sketch map showing the approximate total extent of our spectral image coverage. Nearly all of Mars south of 40 degrees N was observed at least once. About half of the area shown was observed multiple times. South of 65 degrees S, including the south polar cap, our coverage is heavily redundant. The first run was conducted June 29 - July 1, 1988 (all dates are UT) to serve as a baseline prior to possible dust storm activity on Mars. The other observing runs were closer to opposition: Sept. 3-6, 13-15, 24-26, and Oct. 5-7 and 16-18. The September and October observations were scheduled to provide maximum longitudinal coverage. This was also intended to provide a balance between surface observations and observations of predicted dust storm activity. No global dust storm developed in 1988, so we have a large volume of data for the surface of Mars.

Singer, Robert B.↗

Utah FORGE: 3D Gravity Data

These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to test technologies for the development of Engineered Geothermal Systems (EGS). 3D modelling of gravity data at the FORGE site is to help characterize the subsurface geologic framework. Specifically, modelling of gravity data in 3D, used in conjunction with rock density measurements and other subsurface geologic information can provide an independent test of an existing 3D geologic model (e.g. Witter et al., 2018). Such an exercise can be useful for reducing uncertainty in 3D geologic models (Witter et al, 2019).

15 GEOTHERMAL ENERGY↗

Penetrator role in Mars sample strategy

The application of the penetrator to a Mars Return Sample Mission (MRSM) has direct advantages to meet science objectives and mission safety. Based on engineering data and work currently conducted at Ball Aerospace Systems Division, the concept of penetrators as scientific instruments is entirely practical. The primary utilization of a penetrator for MRSM would be to optimize the selection of the sample site location and to help in selection of the actual sample to be returned to Earth. It is recognized that the amount of sample to be returned is very limited, therefore the selection of the sample site is critical to the success of the mission. The following mission scenario is proposed. The site selection of a sample to be acquired will be performed by science working groups. A decision will be reached and a set of target priorities established based on data to give geochemical, geophysical and geological information. The first task of a penetrator will be to collect data at up to 4 to 6 possible landing sites. The penetrator can include geophysical, geochemical, geological and engineering instruments to confirm that scientific data requirements at that site will be met. This in situ near real-time data, collected prior to final targeting of the lander, will insure that the sample site is both scientifically valuable and also that it is reachable within limits of the capability of the lander.

Boynton, William↗

Methods of training the graduate level and professional geologist in remote sensing technology

Requirements for a basic course in remote sensing to accommodate the needs of the graduate level and professional geologist are described. The course should stress the general topics of basic remote sensing theory, the theory and data types relating to different remote sensing systems, an introduction to the basic concepts of computer image processing and analysis, the characteristics of different data types, the development of methods for geological interpretations, the integration of all scales and data types of remote sensing in a given study, the integration of other data bases (geophysical and geochemical) into a remote sensing study, and geological remote sensing applications. The laboratories should stress hands on experience to reinforce the concepts and procedures presented in the lecture. The geologist should then be encouraged to pursue a second course in computer image processing and analysis of remotely sensed data.

Kolm, K. E.↗