Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gaussian simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Pore-resolved investigation of turbulent open channel flow over a randomly packed permeable sediment bed

Pore-resolved direct numerical simulations are performed to investigate the interactions between streamflow turbulence and groundwater flow through a randomly packed porous sediment bed for three permeability Reynolds numbers, Re K = 2.56 , 5.17 and 8.94, representative of natural stream or river systems. Time–space averaging is used to quantify the Reynolds stress, form-induced stress, mean flow and shear penetration depths, and mixing length at the sediment–water interface (SWI). Here, the mean flow and shear penetration depths increase with Re K and are found to be nonlinear functions of non-dimensional permeability. The peaks and significant values of the Reynolds stresses, form-induced stresses, and pressure variations are shown to occur in the top layer of the bed, which is also confirmed by conducting simulations of just the top layer as roughness elements over an impermeable wall. The probability distribution functions (p.d.f.s) of normalized local bed stress are found to collapse for all Reynolds numbers, and their root-mean-square fluctuations are assumed to follow logarithmic correlations. The fluctuations in local bed stress and resultant drag and lift forces on sediment grains are mainly a result of the top layer; their p.d.f.s are symmetric with heavy tails, and can be well represented by a non-Gaussian model fit. The bed stress statistics and the pressure data at the SWI potentially can be used in providing better boundary conditions in modelling of incipient motion and reach-scale transport in the hyporheic zone.

turbulence simulation↗
DOE OSTI2024

Comparison of atmospheric radionuclide dispersion models for a risk-informed consequence-driven advanced reactor licensing framework

Current nuclear facility emergency planning zones (EPZs) are based on outdated distance-based criteria, predating comprehensive dose and risk-informed frameworks. Recent advancements in simulation tools have permitted the development of site-specific, dose, and risk-based consequence-driven assessment frameworks. This study investigated the computation of advanced reactor (AR) EPZs using two atmospheric dispersion models: a straight-line Gaussian plume model (GPM) and a semi-Lagrangian Particle in Cell (PIC). Two case studies were conducted: (1) benchmarking the NRC SOARCA study for the Peach Bottom Nuclear Generating Station and (2) analyzing an advanced INL Heat Pipe Design A microreactor's end-of-cycle inventory. The dose criteria for both cases were 10 mSv at mean weather conditions and 50 mSv at 95th percentile weather conditions at 96 h post-release. Results demonstrated that GPM and PIC estimated similar mean peak dose levels for large boiling water reactors in the farfield case, placing EPZ limits beyond current regulations. For ARs with source terms remaining in the nearfield, PIC modeling without specific nearfield considerations could result in excessively high doses and inaccurate EPZ designations. PIC dispersion demonstrated an order of magnitude higher estimate of nearfield inhalation dose contribution when compared to GPM results. Furthermore, both models significantly reduced EPZ sizing within the nearfield. Thus, reductions in the AR source term may eliminate the need for a separate EPZ.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2023

Two Mesoporous Domains Are Better Than One for Catalytic Deconstruction of Polyolefins

Catalytic hydrogenolysis of polyolefins into valuable liquid, oil, or wax-like hydrocarbon chains for second-life applications is typically accompanied by the hydrogen-wasting co-formation of low value volatiles, notably methane, that increase greenhouse gas emissions. Catalytic sites confined at the bottom of mesoporous wells, under conditions in which the pore exerts the greatest influence over the mechanism, are capable of producing less gases than unconfined sites. A new architecture was designed to emphasize this pore effect, with the active platinum nanoparticles embedded between linear, hexagonal mesoporous silica and gyroidal cubic MCM-48 silica (mSiO 2 /Pt/MCM-48). This catalyst deconstructs polyolefins selectively into ~C 20 –C 40 paraffins and cleaves C–C bonds at a rate (TOF = 4.2 ± 0.3 s –1 ) exceeding that of materials lacking these combined features while generating negligible volatile side products including methane. The time-independent product distribution is consistent with a processive mechanism for polymer deconstruction. In contrast to time- and polymer length-dependent products obtained from non-porous catalysts, mSiO 2 /Pt/MCM-48 yields a C 28 -centered Gaussian distribution of waxy hydrocarbons from polyolefins of varying molecular weight, composition, and physical properties, including low-density polyethylene, isotactic polypropylene, ultrahigh-molecular-weight polyethylene, and mixtures of multiple, post-industrial polyolefins. Here, coarse-grained simulation reveals that the porous-core architecture enables the paraffins to diffuse away from the active platinum site, preventing secondary reactions that produce gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cosmology from weak lensing peaks and minima with Subaru Hyper Suprime-Cam Survey first-year data

We present cosmological constraints derived from peak counts, minimum counts, and the angular power spectrum of the Subaru Hyper Suprime-Cam first-year (HSC Y1) weak lensing shear catalogue. Weak lensing peak and minimum counts contain non-Gaussian information and hence are complementary to the conventional two-point statistics in constraining cosmology. In this work, we forward-model the three summary statistics and their dependence on cosmology, using a suite of N-body simulations tailored to the HSC Y1 data. We investigate systematic and astrophysical effects including intrinsic alignments, baryon feedback, multiplicative bias, and photometric redshift uncertainties. We mitigate the impact of these systematics by applying cuts on angular scales, smoothing scales, signal-to-noise ratio bins, and tomographic redshift bins. By combining peaks, minima, and the power spectrum, assuming a flat-ΛCDM model, we obtain S 8 ≡ σ 8 $\sqrt{Ω_m/0.3}$ = 0.810$^{+0.022}_{-0.026}$⁠, a 35 per cent tighter constraint than that obtained from the angular power spectrum alone. Our results are in agreement with other studies using HSC weak lensing shear data, as well as with Planck 2018 cosmology and recent CMB lensing constraints from the Atacama Cosmology Telescope and the South Pole Telescope.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

A wideband Gaussian noise generator utilizing simultaneously generated pn-sequences.

A digital system has been constructed for the generation of wideband Gaussian noise with a spectrum which is flat to within plus or minus 0.5 dB from 0 to 10 MHz. These characteristics are substantially better than those of commercially available analog noise generators, and are required in testing and simulation of wideband communications systems. The noise is generated by the analog summation of thirty essentially independent binary waveforms, clocked at 35 MHz, and low-pass filtered to 10 MHz.

Hurd, W. J.↗
NASA NTRS1986

Robust detection, isolation and accommodation for sensor failures

The objective is to extend the recent advances in robust control system design of multivariable systems to sensor failure detection, isolation, and accommodation (DIA), and estimator design. This effort provides analysis tools to quantify the trade-off between performance robustness and DIA sensitivity, which are to be used to achieve higher levels of performance robustness for given levels of DIA sensitivity. An innovations-based DIA scheme is used. Estimators, which depend upon a model of the process and process inputs and outputs, are used to generate these innovations. Thresholds used to determine failure detection are computed based on bounds on modeling errors, noise properties, and the class of failures. The applicability of the newly developed tools are demonstrated on a multivariable aircraft turbojet engine example. A new concept call the threshold selector was developed. It represents a significant and innovative tool for the analysis and synthesis of DiA algorithms. The estimators were made robust by introduction of an internal model and by frequency shaping. The internal mode provides asymptotically unbiased filter estimates.The incorporation of frequency shaping of the Linear Quadratic Gaussian cost functional modifies the estimator design to make it suitable for sensor failure DIA. The results are compared with previous studies which used thresholds that were selcted empirically. Comparison of these two techniques on a nonlinear dynamic engine simulation shows improved performance of the new method compared to previous techniques

Emami-Naeini, A.↗
NASA NTRS1993

Cold dark matter and degree-scale cosmic microwave background anisotropy statistics after COBE

We conduct a Monte Carlo simulation of the cosmic microwave background (CMB) anisotropy in the UCSB South Pole 1991 degree-scale experiment. We examine cold dark matter cosmology with large-scale structure seeded by the Harrison-Zel'dovich hierarchy of Gaussian-distributed primordial inhomogeneities normalized to the COBE-DMR measurement of large-angle CMB anisotropy. We find it statistically implausible (in the sense of low cumulative probability F lower than 5 percent, of not measuring a cosmological delta-T/T signal) that the degree-scale cosmological CMB anisotropy predicted in such models could have escaped a detection at the level of sensitivity achieved in the South Pole 1991 experiment.

Gorski, Krzysztof M.↗
NASA NTRSDate not supplied

Probability of Obstacle Collision for UAVs in Presence of Wind

For incorporation of unmanned aerial vehicles into the National Airspace, ensuring safety of the airspace including the vehicles, people, and property on the ground is of utmost importance. One of the safety-critical factors for unmanned aviation flights is the risk of deviating from a planned trajectory resulting in a variety of hazards, including potential loss of separation between vehicle and obstacles or unexpected battery energy consumption. Off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts can lead to unacceptable unexpected deviations from the flight trajectory. It is essential to accurately model such effects on the flight trajectory while computing safety thresholds such as minimum separation from surrounding obstacles, available battery resource to complete the mission or determining delay in the expected time of arrival of flights. In this paper, a tool is presented based on Gaussian Process Regression for wind representation over a pre-defined trajectory for fast, yet approximated, in-time evaluation of possible trajectory deviations caused by wind gusts. The deviation in the planned trajectory caused by wind is further simulated utilizing a 6 degrees-of-freedom (DOF) UAV trajectory simulator comprising of a rotorcraft lumped-mass model with LQRI controller. Both steady-state wind and wind gust effects are investigated. The probability of collision with obstacle is computed and demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in the presence of simulated obstacles and wind conditions. Effect of varying wind conditions and varying UAV airspeed is further demonstrated on experimental flights in the presence of wind measured by ground based weather service stations. The proposed approach would eventually benefit timely mitigation of current and future safety-critical events in autonomous systems by enabling risk-informed decision making.

Portia Banerjee↗
DOE OSTI2022

Recursive Gaussian Process over graphs for Integrating Multi-timescale Measurements in Low-Observable Distribution Systems

The transition to a smarter grid is empowered by enhanced sensor deployments and smart metering infrastructure in the distribution system. Measurements from these sensors and meters can be used for many applications, including distribution system state estimation (DSSE). However, these measurements are typically sampled at different rates and could be intermittent due to losses during the aggregation process. These multi timescale measurements should be reconciled in real-time to perform accurate grid monitoring. This paper tackles this problem by formulating a recursive multi-task Gaussian process (RGP-G) approach that sequentially aggregates sensor measurements. Specifically, we formulate a recursive multi-task GP with and without network connectivity information to reconcile the multi time-scale measurements in distribution systems. Here, the proposed framework is capable of aggregating the multi-time scale measurements batch-wise or in real-time. Following the aggregation of the multi time-scale measurements, the spatial states of the consistent time-series are estimated using matrix completion based DSSE approach. Simulation results on IEEE 37 and IEEE 123 bus test systems illustrate the efficiency of the proposed methods from the standpoint of both multi time-scale data aggregation and DSSE.

42 ENGINEERING↗
DOE OSTI2025

Fermilab Booster loss modelling and rebalancing using Bayesian methods

Fermilab Booster is being upgraded for the PIP-II project to support 20Hz ramp rate at higher intensities. Loss trip limits determine the achievable peak power. To meet PIP-II requirements, losses need to be halved as compared to current levels. Losses primarily occur at injection and transition crossing, with both gradually increasing and threshold-like intensity-dependent behaviors. The existing simulation models are not yet good enough for quantitative loss predictions. In practice, it will be necessary to tune up the Booster using iterative methods and operator intuition. In this paper we present an effort to systematically model Booster losses using active learning (Bayesian exploration) techniques, and subsequently to rebalance them for higher trip limit margins. We first created several sets of spatially and temporally isolated orbit and optics knobs, and trained Gaussian process models for each beam loss monitor as well as beam current. This is a complex task due to safety and timing requirements – we discuss mitigations such as uncertainty constraints and approximate fitting. Once models are stable, we perform large-scale single and multi-objective tuning using scalarized objectives made up of critical beam loss locations. Our results demonstrate significant rebalancing of losses, increasing trip margins, as well as an overall improvement in beam transmission efficiency. We are exploring how to combine existing simulations with experimental data and automate the collection procedure so that more advanced surrogate models can be created over time.

Kuklev, Nikita [Fermilab]↗
DOE OSTI2023

MLMOD: Machine Learning Methods for Data-Driven Modeling in LAMMPS

MLMOD is a software package for incorporating machine learning approaches and models into simulations of microscale mechanics and molecular dynamics in LAMMPS. Recent machine learning approaches provide promising data-driven approaches for learning representations for system behaviors from experimental data and high fidelity simulations. The package facilitates learning and using data-driven models for (i) dynamics of the system at larger spatial-temporal scales (ii) interactions between system components, (iii) features yielding coarser degrees of freedom, and (iv) features for new quantities of interest characterizing system behaviors. MLMOD provides hooks in LAMMPS for (i) modeling dynamics and time-step integration, (ii) modeling interactions, and (iii) computing quantities of interest characterizing system states. The package allows for use of machine learning methods with general model classes including Neural Networks, Gaussian Process Regression, Kernel Models, and other approaches. Here we discuss our prototype C++/Python package, aims, and example usage. For related papers, examples, updates, and additional information see https://github.com/atzberg/mlmod and http://atzberger.org/.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Thermal fluctuations in the dissipation range of homogeneous isotropic turbulence

In this work, using fluctuating hydrodynamics we investigate the effect of thermal fluctuations in the dissipation range of homogeneous isotropic turbulence. Simulations confirm theoretical predictions that the energy spectrum is dominated by these fluctuations at length scales comparable to the Kolmogorov length. We also find that the extreme intermittency in the far-dissipation range predicted by Kraichnan is replaced by Gaussian thermal equipartition.

42 ENGINEERING↗
DOE OSTI2025

Discriminative versus generative approaches to simulation-based inference

Most of the fundamental, emergent, and phenomenological parameters of particle and nuclear physics are determined through parametric template fits. Simulations are used to populate histograms which are then matched to data. This approach is inherently lossy, since histograms are binned and low-dimensional. Deep learning has enabled unbinned and high-dimensional parameter estimation through neural likelihood(-ratio) estimation. We compare two approaches for neural simulation-based inference (NSBI): one based on discriminative learning (classification) and one based on generative modeling. These two approaches are directly evaluated on the same datasets, with a similar level of hyperparameter optimization in both cases. In addition to a Gaussian dataset, we study NSBI using a Higgs boson dataset from the FAIR Universe Challenge. We find that both the direct likelihood and likelihood ratio estimation are able to effectively extract parameters with reasonable uncertainties. For the numerical examples and within the set of hyperparameters studied, we found that the likelihood ratio method is more accurate and/or precise. Both methods have a significant spread from the network training and would require ensembling or other mitigation strategies in practice.

high energy physics↗
DOE OSTI2022

Dark Energy Survey Year 3 results: Cosmology with moments of weak lensing mass maps

We present a cosmological analysis using the second and third moments of the weak lensing mass (convergence) maps from the first three years of data (Y3) data of the Dark Energy Survey. The survey spans an effective area of 4139 square degrees and uses the images of over 100 million galaxies to reconstruct the convergence field. The second moment of the convergence as a function of smoothing scale contains information similar to standard shear 2-point statistics. The third moment, or the skewness, contains additional non-Gaussian information. The data is analyzed in the context of the Λ CDM model, varying five cosmological parameters and 19 nuisance parameters modeling astrophysical and measurement systematics. Our modeling of the observables is completely analytical, and has been tested with simulations in our previous methodology study. We obtain a 1.7% measurement of the amplitude of fluctuations parameter S 8 ≡ σ 8 ( Ω m / 0.3 ) 0.5 = 0.784 ± 0.013 . The measurements are shown to be internally consistent across redshift bins, angular scales, and between second and third moments. In particular, the measured third moment is consistent with the expectation of gravitational clustering under the Λ CDM model. The addition of the third moment improves the constraints on S 8 and Ω m by ∼ 15 % and ∼ 25 % compared to an analysis that only uses second moments. We compare our results with Planck constraints from the cosmic microwave background, finding a 2.2 – 2.8 σ tension in the full parameter space, depending on the combination of moments considered. The third moment, independently, is in 2.8 σ tension with Planck, and thus provides a cross-check on the analyses of 2-point correlations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Landmark-Warped Emulators for Models with Misaligned Functional Response

Many computer models output functional data, and in some cases, these functional data have similar, but misaligned, shape characteristics. In this paper, we introduce a general approach for building emulators for computer models that output misaligned functional data when key values in the functional response (landmarks) can be easily identified. This approach has two main parts: modeling the aligned (using the landmarks) functional data, and modeling the functions that map the misaligned data to the aligned space (warping functions). As the warping functions are required to be monotonic, we give special attention to modeling monotonic functional response data. We discuss how our approach can be easily applied for a variety of typical emulators, such as Gaussian processes, Bayesian multivariate adaptive regression splines, and Bayesian additive regression trees, and how sensitivity analysis can be performed. We demonstrate our approach by building emulators for two applications: (1) a high-energy-density physics computer model used to simulate inertial confinement fusion ignition experiments, where model outputs are highly misaligned, and (2) a multiphysics continuum hydrocode used to simulate high-velocity impact experiments, where model outputs are only slightly misaligned. In case (1) traditional methods cannot be applied, while in (2) they can be applied, but the proposed method performs significantly better.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Far-field thermal imaging below diffraction limit

Non-uniform self-heating and temperature hotspots are major concerns compromising the performance and reliability of submicron electronic and optoelectronic devices. At deep submicron scales where effects such as contact-related artifacts and diffraction limits accurate measurements of temperature hotspots, non-contact thermal characterization can be extremely valuable. In this work, we use a Bayesian optimization framework with generalized Gaussian Markov random field (GGMRF) prior model to obtain accurate full-field temperature distribution of self-heated metal interconnects from their thermoreflectance thermal images (TRI) with spatial resolution 2.5 times below Rayleigh limit for 530nm illumination. Finite element simulations along with TRI experimental data were used to characterize the point spread function of the optical imaging system. In addition, unlike iterative reconstruction algorithms that use ad hoc regularization parameters in their prior models to obtain the best quality image, we used numerical experiments and finite element modeling to estimate the regularization parameter for solving a real experimental inverse problem.

42 ENGINEERING↗
DOE OSTI2021

Numerical investigation of wind turbine wakes under high thrust coefficient

Abstract We study wind turbine wakes of rotors operating at high thrust coefficients ( C T > 24/25) using large‐eddy simulations with a rotating actuator disk model. Wind turbine wakes at high thrust coefficients are different from wakes at low thrust coefficients. Wakes behave differently at high thrust, with increased turbulence and faster recovery. Lower induction in the wake is achieved because wakes in high‐thrust conditions recover much faster than in normal operating conditions. This enhanced recovery is possible thanks to the turbulence generated in the near wake. We explore the mechanism behind this behavior and propose a simple model to reproduce it. We also propose a Gaussian fit for the wakes under high‐thrust conditions and use it use it to initialize an Ainslie type model within the FAST.Farm framework.

FAST.Farm↗
DOE OSTI2023

Computational budget optimization for Bayesian parameter estimation in heavy-ion collisions

Abstract Bayesian parameter estimation provides a systematic approach to compare heavy-ion collision models with measurements, leading to constraints on the properties of nuclear matter with proper accounting of experimental and theoretical uncertainties. Aside from statistical and systematic model uncertainties, interpolation uncertainties can also play a role in Bayesian inference, if the model’s predictions can only be calculated at a limited set of model parameters. This uncertainty originates from using an emulator to interpolate the model’s prediction across a continuous space of parameters. In this work, we study the trade-offs between the emulator (interpolation) and statistical uncertainties. We perform the analysis using spatial eccentricities from the T R ENTo model of initial conditions for nuclear collisions. Given a fixed computational budget, we study the optimal compromise between the number of parameter samples and the number of collisions simulated per parameter sample. For the observables and parameters used in the present study, we find that the best constraints are achieved when the number of parameter samples is slightly smaller than the number of collisions simulated per parameter sample.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗