Development of fuel cell electrodes Semiannual report, 30 Jun. 1966 - 30 Dec. 1966
Fuel cell using circulating liquid electrolyte and water removal by transpiration through porous electrodes
ELECTRODE↗
SEARCH · Engineering Papers
Results for “Fuel Cells”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evaluation of fuel cell water for human consumption
Evaluation of hydrogen-oxygen fuel cell water for human consumption
HUMAN ENGINEERING↗
Application of fuel cells with heat recovery for integrated utility systems
This paper presents the results of a study of fuel cell powerplants with heat recovery for use in an integrated utility system. Such a design provides for a low pollution, noise-free, highly efficient integrated utility. Use of the waste heat from the fuel cell powerplant in an integrated utility system for the village center complex of a new community results in a reduction in resource consumption of 42 percent compared to conventional methods. In addition, the system has the potential of operating on fuels produced from waste materials (pyrolysis and digester gases); this would provide further reduction in energy consumption.
Shields, V.↗
Identification of durable and non-durable FeN x sites in Fe–N–C materials for proton exchange membrane fuel cells
We report that while Fe–N–C materials are a promising alternative to platinum for catalysing the oxygen reduction reaction in acidic polymer fuel cells, limited understanding of their operando degradation restricts rational approaches towards improved durability. Here we show that Fe–N–C catalysts initially comprising two distinct FeN x sites (S1 and S2) degrade via the transformation of S1 into iron oxides while the structure and number of S2 were unmodified. Structure–activity correlations drawn from end-of-test 57 Fe Mössbauer spectroscopy reveal that both sites initially contribute to the oxygen reduction reaction activity but only S2 substantially contributes after 50 h of operation. From in situ 57 Fe Mössbauer spectroscopy in inert gas coupled to calculations of the Mössbauer signature of FeN x moieties in different electronic states, we identify S1 to be a high-spin FeN 4 C 12 moiety and S2 a low- or intermediate-spin FeN 4 C 10 moiety. These insights lay the groundwork for rational approaches towards Fe–N–C cathodes with improved durability in acidic fuel cells.
36 MATERIALS SCIENCE↗
Advanced Alkaline Membrane H 2 /Air Fuel Cell System with Novel Technique for Air CO 2 Removal
Over the course of this project, significant progress was achieved in developing the hydroxide exchange membrane fuel cell (HEMFC) and the electrochemically-driven CO₂ separator (EDCS), with a focus on improving performance, durability, and scalability. Key milestones were met, and the technology demonstrated potential for a wide range of applications, including fuel cell vehicles, direct air capture (DAC), and life support systems.
08 HYDROGEN↗
Anodic Conversion of Cyclohexane, Methylcyclohexane, and 2-Propanol: Towards a Regenerable Liquid-Fed Fuel Cell
Liquid Organic Hydrogen Carriers (LOHCs) are promising for hydrogen and energy storage but require endothermic catalytic dehydrogenation. An alternative approach is a regenerable liquid-fed fuel cell which spontaneously converts an organic carrier from its hydrogen-rich to hydrogen-lean form while generating electrical power. The anodic electrooxidation of cyclohexane, methylcyclohexane and 2-propanol in a high temperature polybenzimidazole/phosphoric acid (PBI/PA) PEM fuel cell was investigated along with a quantitative analysis of reaction products. Cyclohexane and methylcyclohexane were predominantly converted to CO 2 with only a trace formation of the corresponding aromatic and cyclic olefin byproducts. This near-to-complete oxidation of the fuels is in sharp contrast to previous reports of a selective conversion of cyclohexane to benzene, with no CO 2 byproducts. In experiments with 2-propanol, acetone was produced, with diisopropylether, propylene and CO 2 as only minor side products. However, the extent of CO 2 formation greatly increased at higher current densities.
25 ENERGY STORAGE↗
Development of Machine-Learned Interatomic Potentials to Predict Structure, Transport, and Reactivity in Platinum-Based Fuel Cells
Machine-learned interatomic potentials (MLIPs) have rapidly progressed in accuracy, speed, and data efficiency in recent years. However, training robust MLIPs in multicomponent systems remains a challenge. In this work, we train an MLIP to describe hydrated Nafion ionomers and platinum catalysts, which are important components of fuel cells, by constructing a diverse training set to describe the bulk polymer and interfacial catalyst–polymer interactions well. We use our trained MLIP to study the properties of the platinum–Nafion system, including polymer structure, proton mobility in a bulk Nafion polymer and near a platinum-Nafion interface, and reactions near and far from the interface, finding excellent results for structure and reactions contained within our training set. Transport seems to be well described, with both vehicular transport and Grotthuss hopping captured, although converged calculations of diffusivities were not computed because they require calculations of tens of nanoseconds that are challenging with current state-of-the-art MLIPs. The combined insights that this model provides can be leveraged to optimize fuel cell performance, and the approach can be applied to other chemical processes and devices where structure, transport, and reactivity all contribute to the overall observed performance.
33 ADVANCED PROPULSION SYSTEMS↗
Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C
Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.
Bian, Wenjuan↗
Tailoring the Mass Transport to Achieve High-Performing Unitized Regenerative Fuel Cells Considering Practical Operating Conditions
Unitized regenerative fuel cells (URFCs) convert electrical energy to chemical bonds in hydrogen during charge and convert chemical energy to output electricity during discharge, offering a promising solution to long-term energy storage. Recent studies indicate that the round-trip-voltaic efficiency (RTE) and longevity of URFCs are limited by complex mass transport during charging and discharging. Here, we first investigate how different porous transport layer (PTL) structures can impact URFC performance. The preferred PTL has a low tortuosity and high porosity, leading to a high RTE above 50% at 1 A cm −2 using Nafion 212. Moreover, thicker membranes, such as Solvay 90, are required to ensure mechanical stability and minimize H 2 crossover when operating under high differential pressure. Although this assembly inevitably leads to a higher ohmic loss, the RTE can be improved by further tailoring the electrode structures to facilitate mass transport by using supported catalyst, which still achieves over 50% RTEs at 1 A cm −2 . Optimization of porous structure to mitigate mass transport resistance with appropriate materials down selection considering practical application requirements can be a key design principle for achieving high-performing URFCs.
25 ENERGY STORAGE↗
Electrolytically regenerative hydrogen-oxygen fuel cell battery.
Electrolytically regenerative hydrogen-oxygen fuel cells noting test on cycle life performance
Findl, E.↗
Experimental investigation of the dynamics of water rejection from a matrix type of hydrogen-oxygen fuel cell
Water rejection dynamics in hydrogen oxygen fuel cells
Easter, R. W.↗
Fuel cell systems for manned spacecraft.
Manned spacecraft fuel cell selection and design, discussing Gemini ion exchange membrane and Apollo Bacon cell systems
Mcbryar, H.↗
Electrolytically regenerative hydrogen-oxygen fuel cell Patent
Electrolytically regenerative hydrogen-oxygen fuel cells
Findl, E.↗
Stabilizing platinum in phosphoric acid fuel cells
The cathode of the phosphoric acid fuel cell uses a high surface area platinum catalyst supported on a carbon substrate. During operation, the small platinum crystallites sinter, causing loss in cell performance. A support was developed that stabilizes platinum in the high surface area condition by retarding or preventing the sintering process. The approach is to form etch pits in the carbon by oxidizing the carbon in the presence of a metal oxide catalyst, remove the metal oxide by an acid wash, and then deposit platinum in these pits. Results confirm the formation of etch pits in each of the three supports chosen for investigation: Vulcan XC-72R, Vulcan XC-72 that was graphized at 2500 C, and Shawinigan Acetylene Black.
Remick, R. J.↗
NASA Lewis Evaluation of Regenerative Fuel Cell (RFC) Systems
Evaluation of two regenerative fuel cell (RFC) systems was begun in-house, and under contracts and grants. The passive hydrogen-oxygen RFC offers the possibility of a high-energy density, long-life storage system for geosynchronous Earth orbit missions. The hydrogen-bromine RFC offers the combination of high efficiency and moderate energy density that could ideally suit low Earth orbit missions if successfully developed. Either or both of these systems would be attractive additions to the storage options available to designers of future missions.
Hagedorn, N. H.↗
The application of Dow Chemical's perfluorinated membranes in proton-exchange membrane fuel cells
Dow Chemical's research activities in fuel cell devices revolves around the development and subsequent investigation of the perfluorinated inomeric membrane separator useful in proton-exchange membrane systems. Work is currently focusing on studying the effects of equivalent weight, thickness, water of hydration, pretreatment procedures, as well as the degree of water management required for a given membrane separator in the cell. The presentation will include details of certain aspects of the above as well as some of the requirements for high and low power generation.
Eisman, G. A.↗
Methods of fabricating solid oxide fuel cells
In various embodiments, a solid oxide fuel cell is fabricated in part by disposing a functional layer between the cathode and the solid electrolyte.
30 DIRECT ENERGY CONVERSION↗
Chromate based ceramic anode materials for solid oxide fuel cells
The disclosure relates to solid oxide fuel cell (SOFC) anode materials that comprise various compositions of chromate based oxide materials. These materials offer high conductivity achievable at intermediate and low temperatures and can be used to prepare the anode layer of a SOFC. A method of making a low- or intermediate-temperature SOFC having an anode layer comprising a chromate based oxide material is also provided.
Abdul Jabbar, Mohammed Hussain↗