Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fortran”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Channeling through Bent Crystals

Bent crystals have demonstrated potential for use in beam collimation. A process called channeling is when accelerated particle beams are trapped by the nuclear potentials in the atomic planes within a crystal lattice. If the crystal is bent then the particles can follow the bending angle of the crystal. There are several different effects that are observed when particles travel through a bent crystal including dechanneling, volume capture, volume reflection and channeling. With a crystal placed at the edge of a particle beam, part of the fringe of the beam can be deflected away towards a detector or beam dump, thus helping collimate the beam. There is currently FORTRAN code by Igor Yazynin that has been used to model the passage of particles through a bent crystal. Using this code, the effects mentioned were explored for beam energy that would be seen at the Facility for Advanced Accelerator Experimental Tests (FACET) at a range of crystal orientations with respect to the incoming beam. After propagating 5 meters in vacuum space past the crystal the channeled particles were observed to separate from most of the beam with some noise due to dechanneled particles. Progressively smaller bending radii, with corresponding shorter crystal lengths, were compared and it was seen that multiple scattering decreases with the length of the crystal therefore allowing for cleaner detection of the channeled particles. The input beam was then modified and only a portion of the beam sent through the crystal. With the majority of the beam not affected by the crystal, most particles were not deflected and after propagation the channeled particles were seen to be deflected approximately 5mm. After a portion of the beam travels through the crystal, the entire beam was then sent through a quadrupole magnet, which increased the separation of the channeled particles from the remainder of the beam to a distance of around 20mm. A different code, which was developed at SLAC, was used to create an angular profile plot which was compared to what was produced by Yazynin's code for a beam with no multiple scattering. The results were comparable, with volume reflection and channeling effects observed and the range of crystal orientations at which volume reflection is seen was about 1 mrad in both simulations.

43 PARTICLE ACCELERATORS↗

OpenSHMEM Application Programming Interface (V.1.0 FINAL)

This document defines the elements of the OpenSHMEM Application Programming Interface. The purpose of the OpenSHMEM API is to provide programmers with a standard interface for writing parallel programs using C, C++ and Fortran with one-sided communication.

99 GENERAL AND MISCELLANEOUS↗

Center for Programming Models for Scalable Parallel Computing (Final Report)

As part of the Center for Programming Models for Scalable Parallel Computing, Rice University collaborated with project partners in the design, development and deployment of language, compiler, and runtime support for parallel programming models to support application development for the “leadership-class” computer systems at DOE national laboratories. Work over the course of this project has focused on the design, implementation, and evaluation of a second-generation version of Coarray Fortran. Research and development efforts of the project have focused on the CAF 2.0 language, compiler, runtime system, and supporting infrastructure. This has involved working with the teams that provide infrastructure for CAF that we rely on, implementing new language and runtime features, producing an open source compiler that enabled us to evaluate our ideas, and evaluating our design and implementation through the use of benchmarks. The report details the research, development, findings, and conclusions from this work.

97 MATHEMATICS AND COMPUTING↗

A Polyhedral Transformation Framework for Compiler Optimization (Final Project Report)

The project developed the polyhedral compiler transformation module PolyOpt/Fortran in the ROSE compiler framework. PolyOpt/Fortran performs automated transformation of affine loop nests within FORTRAN programs for enhanced data locality and parallel execution. A FORTAN version of the Polybench library was also developed by the project. A third development was a dynamic analysis approach to gauge vectorization potential within loops of programs; software (DDVec) for automated instrumentation and dynamic analysis of programs was developed.

97 MATHEMATICS AND COMPUTING↗

An Update on Improvements to NiCE Support for PROTEUS

The Department of Energy Office of Nuclear Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has supported the development of the NEAMS Integrated Computational Environment (NiCE), a modeling and simulation workflow environment that provides services and plugins to facilitate tasks such as code execution, model input construction, visualization, and data analysis. This report details the development of workflows for the reactor core neutronics application, PROTEUS. This advanced neutronics application (primarily developed at Argonne National Laboratory) aims to improve nuclear reactor design and analysis by providing an extensible and massively parallel, finite-element solver for current and advanced reactor fuel neutronics modeling. The integration of PROTEUS-specific tools into NiCE is intended to make the advanced capabilities that PROTEUS provides more accessible to the nuclear energy research and development community. This report will detail the work done to improve existing PROTEUS workflow support in NiCE. We will demonstrate and discuss these improvements, including the development of flexible IO services, an improved interface for input generation, and the addition of advanced Fortran development tools natively in the platform.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

X-ray simulation algorithms used in ISP

ISP is a simulation code which is sometimes used in the USNDS program. ISP is maintained by Sandia National Lab. However, the X-ray simulation algorithm used by ISP was written by scientists at LANL – mainly by Ed Fenimore with some contributions from John Sullivan and George Neuschaefer and probably others. In email to John Sullivan on July 25, 2016, Jill Rivera, ISP project lead, said “ISP uses the function xdosemeters_sim from the xgen library.” The is a fortran subroutine which is also used to simulate the X-ray response in consim (a descendant of xgen). Therefore, no separate documentation of the X-ray simulation algorithms in ISP have been written – the documentation for the consim simulation can be used.

97 MATHEMATICS AND COMPUTING↗

CTF Preprocessor User's Manual

This document describes how a user should go about using the CTF pre- processor tool to create an input deck for modeling rod-bundle geometry in CTF. The tool was designed to generate input decks in a quick and less error-prone manner for CTF. The pre-processor is a completely independent utility, written in Fortran, that takes a reduced amount of input from the user. The information that the user must supply is basic information on bundle geometry, such as rod pitch, clad thickness, and axial location of spacer grids--the pre-processor takes this basic information and determines channel placement and connection information to be written to the input deck, which is the most time-consuming and error-prone segment of creating a deck. Creation of the model is also more intuitive, as the user can specify assembly and water-tube placement using visual maps instead of having to place them by determining channel/channel and rod/channel connections. As an example of the benefit of the pre-processor, a quarter-core model that contains 500,000 scalar-mesh cells was read into CTF from an input deck containing 200,000 lines of data. This 200,000 line input deck was produced automatically from a set of pre-processor decks that contained only 300 lines of data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Experience Report for WOPR

One of the purposes of the SQA effort at LLNL is to attempt to determine the 'goodness' of the research codes used for various scientific applications. Typically these are two and three dimensional multi-physics simulation and modeling codes. These legacy research codes are used for applciations such as atmospheric dispersion modeling and analysis and prediction of the performance of engineered systems. These codes are continually subjected to automated regression test suites consisting of verified and validated expected results. Code is managed in repositories. Experience level of developers is high in the knowledge domain, platforms, and languages used. Code size of the multi-physics code used in this study was 578,242 lines excluding comment and blank lines or 5538.7 function points. Languages were 70% C++, 20% C, and 10% Fortran. The code has 130 users and a development team of 14 and an embedded SQE. The code has achieved 100% prime feature test coverage, 73.6% functional test coverage, and 71.5% statement test coverage. The average cyclomatic complexity of the code was 6.25. The codes have evolved over 10 years. Research codes are challenging because there is a desire to balance agility with discipline as well as compliance with DOE standards. Agility is important to allow experimentation with new algorithms and addition of the latest physics features. Discipline is important to increase the quality of the codes. Automation of processes and defect prevention/detection are deployed throughout the software development process. Since resarch codes are a small segment of the software industry, not much information exists in terms of reliability studies on these types of codes. This paper describes attempts to determine the goodness of these research codes. Goodness defined as both correctness of the codes and their fault densities. Correctness is determined by user interviews, peer review; feature based automated testing, and coverage measurement. This paper focuses on the fault density aspect of goodness and reliability of the codes in particular. The approach taken was to use multiple fault density prediction methods and compare results to actual experimentation and other industry studies on fault density. As a result of the predictions and experiments our confidence in the prediction methods was increased and our confidence in the goodness of the code from a fault density perspective was given more context. A large unintended benefit of these experiments was to find defects hidden for years in the codes when using the Monte Carlo reliability testing results to develop heuristic based bug driven tests.

99 GENERAL AND MISCELLANEOUS↗

PARFUME User's Guide

PARFUME, a fuel performance analysis and modeling code, is being developed at the Idaho National Laboratory for evaluating gas reactor coated particle fuel assemblies for prismatic, pebble bed, and plate type fuel geometries. The code is an integrated mechanistic analysis tool that evaluates the thermal, mechanical, and physico-chemical behavior of coated fuel particles (TRISO) and the probability for fuel failure given the particle-to-particle statistical variations in physical dimensions and material properties that arise during the fuel fabrication process. Using a robust finite difference numerical scheme, PARFUME is capable of performing steady state and transient heat transfer and fission product diffusion analyses for the fuel. Written in FORTRAN 90, PARFUME is easy to read, maintain, and modify. Currently, PARFUME is supported only on MS Windows platforms. This document represents the initial version of the PARFUME User Guide, a supplement to the PARFUME Theory and Model Basis Report which describes the theoretical aspects of the code. User information is provided including: 1) code development, 2) capabilities and limitations, 3) installation and execution, 4) user input and output, 5) sample problems, and 6) error messages. In the near future, the INL plans to release a fully benchmarked and validated beta version of PARFUME.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗