Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Origins of ferromagnetism in transition-metal doped Si

We present results of the magnetic, structural, and chemical characterizations of Mn{sup +}-implanted Si displaying n-type semiconducting behavior and ferromagnetic ordering with Curie temperature, T{sub C}, well above room temperature. The temperature-dependent magnetization measured by superconducting quantum interference device from 5 to 800 K was characterized by three different critical temperatures (T{sub C}*{approx}45 K, T{sub C1}{approx}630-650 K, and T{sub C2}{approx}805-825 K). Their origins were investigated using dynamic secondary ion mass spectroscopy and transmission electron microscopy (TEM) techniques, including electron energy loss spectroscopy, Z-contrast scanning TEM imaging, and electron diffraction. We provided direct evidences of the presence of a small amount of Fe and Cr impurities which were unintentionally doped into the samples together with the Mn{sup +} ions as well as the formation of Mn-rich precipitates embedded in a Mn-poor matrix. The observed T{sub C}* is attributed to the Mn{sub 4}Si{sub 7} precipitates identified by electron diffraction. Possible origins of T{sub C1} and T{sub C2} are also discussed. Our findings raise questions regarding the origin of the high-T{sub C} ferromagnetism reported in many material systems without a careful chemical analysis.

36 MATERIALS SCIENCE↗

Determination of shape anisotropy in embedded low contrast submonolayer quantum dot structures

We describe a procedure for the morphological characterization of hard-to-image submonolayer quantum dot structures. This procedure employs high resolution x-ray diffraction based reciprocal space mapping, accompanied by rigorous diffraction modeling for precise determination of the morphology of submonolayer quantum dots. Our modelling results and experimental data clearly show that the investigated quantum dots are anisotropically elongated along the [110] orientation. Complementary polarization dependent photoluminescence measurements, combined with our previously reported magneto-photoluminescence data, confirm this conclusion. Our formalism enables direct extraction of structural information of complex embedded three-dimensional structures, which, due to their low electron density contrast with respect to the surrounding host matrix, cannot be readily investigated by traditional electron diffraction techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and charge ordering behavior of the colossal magnetoresistive manganite Nd{sub 0.5}Sr{sub 0.5}MnO{sub 3}

The structure and charge ordering (CO) behavior of the three-dimensional colossal magnetoresistive manganite Nd{sub 0.5}Sr{sub 0.5}MnO{sub 3} have been studied by transmission electron microscopy. The electron diffraction analysis suggested its room temperature structure as orthorhombic, with a Pnma space group. By controlling the experimental temperature setting either above or below the CO transition temperature, it was observed that the CO grew through the propagation of the CO front. The twin boundaries were the barriers of the CO front movement. In heavily ion irradiated samples, it was observed that the CO front was pinned by the intracrystalline defects, forming a zigzag shape interface. Moreover, the electron beam was observed to influence the CO.

36 MATERIALS SCIENCE↗

Synthesis and structure of high-quality films of copper polyphthalocyanine – 2D conductive polymer

Graphical abstract: - Highlights: • 2D polymers show a big promise for science and technology. • We develop a new procedure for the direct synthesis of copper polyphthalocyanine. • We obtain reliable experimental data on the CuPPC structure. • With the support of quantum chemical calculations we describe electronic structure of CuPPC. - Abstract: Copper polyphthalocyanine (CuPPC), a 2D conjugated polymer, is a promising material for electronics and photovoltaics, but its applications were hindered by a poor processability. We propose an experimental approach, by which thin films of CuPPC, can be directly synthesized in a chemical vapor deposition (CVD) set-up at mild temperature (420 °C). High polymerization degree and high crystallinity of the films were confirmed by TEM, FTIR and UV–vis studies. From XRD and TEM electron diffraction, we conclude that the polymer has AA layer stacking with the inter-layer distance of 0.32 nm. The assignment of X-ray and TEM diffraction patterns was based on quantum-chemical calculations. Based on the latter, we also discuss electronic structure and conclude that CuPPC is rather a semi-metal than semi-conductor.

36 MATERIALS SCIENCE↗

Silicate-free growth of high-quality ultrathin cerium oxide films on Si(111)

Ultrathin Ce{sub 2}O{sub 3} layers have been grown on Si(111) by reactive metal deposition in an oxygen background and characterized by x-ray standing waves, x-ray diffraction, x-ray photoelectron spectroscopy, and low-energy electron diffraction to elucidate and quantify both atomic structure and chemical composition. It is demonstrated that highly ordered, mostly B-oriented, epitaxial ceria films can be achieved by preadsorption of a monolayer of atomic chlorine, effectively passivating the substrate and thereby suppressing cerium silicate and silicon oxide formation at the interface.

36 MATERIALS SCIENCE↗

Determination of the five parameter grain boundary character distribution of nanocrystalline alpha-zirconium thin films using transmission electron microscopy

Grain boundary engineering and other fundamental materials science problems (e.g., phase transformations and physical properties) require an improvement in the understanding of the type and population of grain boundaries in a given system – yet, databases are limited in number and spare in detail, including for hcp crystals such as zirconium. One way to rapidly obtain databases to analyze is to use small-grained materials and high spatial resolution orientation microscopy techniques, such as ASTAR™/precession electron diffraction. To demonstrate this, a study of grain boundary character distributions was conducted for α-zirconium deposited at room temperature on fused silica substrates using physical vapor deposition. The orientation maps of the nanocrystalline thin films were acquired by the ASTARα/precession electron diffraction technique, a new transmission electron microscope based orientation microscopy method. The reconstructed grain boundaries were classified as pure tilt, pure twist, 180°-twist and 180°-tilt grain boundaries based on the distribution of grain boundary planes with respect to the angle/axis of misorientation associated with grain boundaries. The results of the current study were compared to the results of a similar study on α-titanium and the molecular dynamics results of grain boundary energy for α-titanium.

36 MATERIALS SCIENCE↗

Differential evolution: Global search problem in LEED-IV surface structural analysis

The search process associated with the quantitative theory–experiment comparison in Low Energy Electron Diffraction surface structural analysis can be very time consuming, especially in the case of complex materials with many atoms in the unit cell. Global search algorithms need to be employed to locate the global minimum of the reliability factor in the multi-dimensional structural parameter space. In this study we investigate the use of the Differential Evolution algorithm in Low Energy Electron Diffraction structural analysis. Despite the simplicity of its mechanism the Differential Evolution algorithm presents an impressive performance when applied to ultra-thin films of BaTiO{sub 3}(001) in a theory–theory comparison. A scaling relation of N{sup (1.47} {sup ±} {sup 0.08)} was obtained, where N is the total number of parameters to be optimized. - Highlights: • We investigated the use of the Differential Evolution algorithm (DE) for the LEED search problem. • The DE method was applied to the optimization of the surface structure of the BaTiO{sub 3}(001) ultra-thin films. • A very favorable scaling relation of N{sup 1.47} was obtained, where N is the total number of parameters to be optimized.

36 MATERIALS SCIENCE↗

Improving Electrocatalysts for O2 Reduction by Fine-Tuning the Pt-Support Interaction: Pt Monolayer on the Surfaces of a Pd3Fe(111) Single-Crystal Alloy

We improved the effectiveness of Pt monolayer electrocatalysts for the oxygen-reduction reaction (ORR) using a novel approach to fine-tuning the Pt monolayer interaction with its support, exemplified by an annealed Pd{sub 3}Fe(111) single-crystal alloy support having a segregated Pd layer. Low-energy ion scattering and low-energy electron diffraction studies revealed that a segregated Pd layer, with the same structure as Pd (111), is formed on the surface of high-temperature-annealed Pd{sub 3}Fe(111). This Pd layer is considerably more active than Pd(111); its ORR kinetics is comparable to that of a Pt(111) surface. The enhanced catalytic activity of the segregated Pd layer compared to that of bulk Pd apparently reflects the modification of Pd surface's electronic properties by underlying Fe. The Pd{sub 3}Fe(111) suffers a large loss in ORR activity when the subsurface Fe is depleted by potential cycling (i.e., repeated excursions to high potentials in acid solutions). The Pd{sub 3}Fe(111) surface is an excellent substrate for a Pt monolayer ORR catalyst, as verified by its enhanced ORR kinetics on PT{sub ML}/Pd/Pd{sub 3}Fe(111). Our density functional theory studies suggest that the observed enhancement of ORR activity originates mainly from the destabilization of OH binding and the decreased Pt-OH coverage on the Pt/Pd/Pd{sub 3}Fe(111) surface. The activity of Pt{sub ML}/Pd(111) and Pt(111) is limited by OH removal, whereas the activity of Pt{sub ML}/Pd/Pd{sub 3}Fe(111) is limited by the O-O bond scission, which places these two surfaces on the two sides of the volcano plot.

30 DIRECT ENERGY CONVERSION↗

Structural evolution of small ruthenium cluster anions

The structures of ruthenium cluster anions have been investigated using a combination of trapped ion electron diffraction and density functional theory computations in the size range from eight to twenty atoms. In this size range, three different structural motifs are found: Ru{sub 8}{sup −}–Ru{sub 12}{sup −} have simple cubic structures, Ru{sub 13}{sup −}–Ru{sub 16}{sup −} form double layered hexagonal structures, and larger clusters form close packed motifs. For Ru{sub 17}{sup −}, we find hexagonal close packed stacking, whereas octahedral structures occur for Ru{sub 18}{sup −}–Ru{sub 20}{sup −}. Our calculations also predict simple cubic structures for the smaller clusters Ru{sub 4}{sup −}–Ru{sub 7}{sup −}, which were not accessible to electron diffraction measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization induced ordering of hard magnetic L1{sub 0} phase in melt-spun FeNi-based ribbons

The microstructure of newly developed hard magnetic Fe{sub 42}Ni{sub 41.3}Si{sub x}B{sub 12-x}P{sub 4}Cu{sub 0.7} (x = 2 to 8 at%) nanocrystalline alloy ribbons has been studied by transmission electron microscopy (TEM) and electron diffraction. A high-density polycrystalline grains, ∼30 nm in size, were formed in a ribbon after annealing at 673 K for 288 hours. Elemental mapping of the annealed specimen revealed the coexistence of three regions, Fe-rich, Ni-rich, and nearly equiatomic Fe-Ni, with areal fractions of 37%, 40%, and 23 %, respectively. The equiatomic L1{sub 0}-type ordered phase of FeNi was detected in between the Fe and Ni-rich phases. The presence of superlattice reflections in nanobeam electron diffraction patterns confirmed the formation of the hard magnetic L1{sub 0} phase beyond any doubt. The L1{sub 0} phase of FeNi was detected in alloys annealed in the temperature range of 673 to 813 K. The present results suggest that the order-disorder transition temperature of L1{sub 0} FeNi is higher than the previously reported value (593 K). The high diffusion rates of the constituent elements induced by the crystallization of an amorphous phase at relatively low temperature (∼673 K) are responsible for the development of atomic ordering in FeNi.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of RTiNO{sub 2} (R=Ce, Pr, Nd) perovskite nitride oxides

Neutron powder diffraction indicates that CeTiNO{sub 2} and PrTiNO{sub 2} crystallize with orthorhombic Pnma symmetry (Ce: a=5.5580(5), b=7.8369(7), and c=5.5830(4) Å; Pr: a=5.5468(5), b=7.8142(5), and c=5.5514(5) Å) as a result of a{sup –}b{sup +}a{sup –} tilting of the titanium-centered octahedra. Careful examination of the NPD data, confirms the absence of long range anion order in both compounds, while apparent superstructure reflections seen in electron diffraction patterns provide evidence for short range anion order. Inverse magnetic susceptibility plots reveal that the RTiNO{sub 2} (R=Ce, Pr, Nd) compounds are paramagnetic with Weiss constants that vary from −28 to −42 K. Effective magnetic moments for RTiNO{sub 2} (R=Ce, Pr, Nd) are 2.43 μ{sub B}, 3.63 μ{sub B}, and 3.47 μ{sub B}, respectively, in line with values expected for free rare-earth ions. Deviations from Curie–Weiss behavior that occur below 150 K for CeTiNO{sub 2} and below 30 K for NdTiNO{sub 2} are driven by magnetic anisotropy, spin–orbit coupling, and crystal field effects. - Graphical abstract: The structure and magnetism of the oxide nitride perovskites RTiNO{sub 2} (R=Ce, Pr, Nd) have been explored. The average symmetry is shown to be Pnma with a random distribution of oxide and nitride ions and a{sup −}b{sup +}a{sup −} tilting of the titanium-centered octahedra, but electron diffraction shows evidence for short range anion order. All three compounds are paramagnetic but deviations from the Curie Weiss law are seen below 150 K for R=Ce and below 30 K for R=Nd. - Highlights: • The oxide nitride perovskites RTiNO{sub 2} (R=Ce, Pr) have been prepared and their structures determined. • Diffraction measurements indicate short range cis-order of O and N, but no long range order. • Compounds are paramagnetic with Weiss constants that vary from −28 to −42 K. • CeTiO{sub 2}N and NdTiO{sub 2}N deviate from Curie–Weiss behavior below 150 and 30 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combining nanocalorimetry and dynamic transmission electron microscopy for in situ characterization of materials processes under rapid heating and cooling

Nanocalorimetry is a chip-based thermal analysis technique capable of analyzing endothermic and exothermic reactions at very high heating and cooling rates. Here, we couple a nanocalorimeter with an extremely fast in situ microstructural characterization tool to identify the physical origin of rapid enthalpic signals. More specifically, we describe the development of a system to enable in situ nanocalorimetry experiments in the dynamic transmission electron microscope (DTEM), a time-resolved TEM capable of generating images and electron diffraction patterns with exposure times of 30 ns–500 ns. The full experimental system consists of a modified nanocalorimeter sensor, a custom-built in situ nanocalorimetry holder, a data acquisition system, and the DTEM itself, and is capable of thermodynamic and microstructural characterization of reactions over a range of heating rates (10{sup 2} K/s–10{sup 5} K/s) accessible by conventional (DC) nanocalorimetry. To establish its ability to capture synchronized calorimetric and microstructural data during rapid transformations, this work describes measurements on the melting of an aluminum thin film. We were able to identify the phase transformation in both the nanocalorimetry traces and in electron diffraction patterns taken by the DTEM. Potential applications for the newly developed system are described and future system improvements are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultralow-temperature cryogenic transmission electron microscopy using a new helium flow cryostat stage

Advances in cryogenic electron microscopy have opened new avenues for probing quantum phenomena in correlated materials. This study reports the installation and performance of a new side-entry condenZero cryogenic cooling system for JEOL (Scanning) Transmission Electron Microscopes (S/TEM), utilizing compressed liquid helium (LHe) and designed for imaging and spectroscopy at ultra-low temperatures. The system includes an external dewar mounted on a vibration-damping stage and a pressurized, low-noise helium transfer line with a remotely controllable needle valve, ensuring stable and efficient LHe flow with minimal thermal and mechanical noise. Performance evaluation demonstrates a stable base temperature of 4.37 K measured using a Cernox bare chip sensor on the holder with temperature fluctuations within ±0.004 K. Complementary in-situ electron energy-loss spectroscopy (EELS) via aluminum bulk plasmon analysis was used to measure the local specimen temperature and validate cryogenic operation during experiments. The integration of cryogenic cooling with other microscopy techniques, including electron diffraction and Lorentz TEM, was demonstrated by resolving charge density wave (CDW) transitions in NbSe2 using electron diffraction, and imaging nanometric magnetic skyrmions in MnSi via Lorentz TEM. In conclusion, this platform provides reliable cryogenic operation below 7 K, establishing a low-drift route for direct visualization of electronic and magnetic phase transformations in quantum materials.

Charge density wave↗

Epitaxial growth of (1 1 1)-oriented spinel CoCr 2 O 4 /Al 2 O 3 heterostructures

High quality (1 1 1)-oriented CoCr 2 O 4 /Al 2 O 3 heterostructures were synthesized on the sapphire (0 0 0 1) single crystal substrates by pulsed laser deposition. The structural properties are demonstrated by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray reflectivity, and X-ray diffraction. X-ray photoemission spectroscopy confirms that the films possess the proper chemical stoichiometry. In conclusion, this work offers a pathway to fabricating spinel type artificial quasi-two-dimensional frustrated lattices by means of geometrical engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stoichiometry control of complex oxides by sequential pulsed-laser deposition from binary-oxide targets

To have precise atomic layer control over interfaces, we examine the growth of complex oxides through the sequential deposition from binary targets by pulsed laser deposition. In situ reflection high-energy electron diffraction (RHEED) is used to control the growth and achieve films with excellent structural quality. The growth from binary oxide targets is fundamentally different from single target growth modes and shows more similarities to shuttered growth by molecular beam epitaxy. The RHEED intensity oscillations of non-stoichiometric growth are consistent with a model of island growth and accumulation of excess material on the surface that can be utilized to determine the correct stoichiometry for growth. Correct monolayer doses can be determined through an envelope frequency in the RHEED intensity oscillations. In order to demonstrate the ability of this growth technique to create complex heterostructures, the artificial n = 2 and 3 Sr n+1 Ti n O 3 n+1 Ruddlesden-Popper phases are grown with good long-range order. Furthermore, this method enables the precise unit-cell level control over the structure of perovskite-type oxides, and thus the growth of complex materials with improved structural quality and electronic functionality.

36 MATERIALS SCIENCE↗

Absence of vapor-liquid-solid growth during molecular beam epitaxy of self-induced InAs nanowires on Si

The growth mechanism of self-induced InAs nanowires (NWs) grown on Si (111) by molecular beam epitaxy was investigated by in situ reflection high energy electron diffraction and ex situ scanning and transmission electron microscopy. Abrupt morphology transition and in-plane strain relaxation revealed that InAs NWs nucleate without any significant delay and under the absence of indium (In) droplets. These findings are independent of the As/In-flux ratio, revealing entirely linear vertical growth rate and nontapered NWs. No evidence of In droplets nor associated change in the NW apex morphology was observed for various growth termination procedures. These results highlight the absence of vapor-liquid-solid growth, providing substantial benefits for realization of atomically abrupt doping and composition profiles in future axial InAs-based NW heterostructures on Si.

36 MATERIALS SCIENCE↗

Composites Strengthened with Graphene Platelets and Formed in Semisolid State Based on α and α/β MgLiAl Alloys

MgLiAl base composites strengthened with graphene platelets were prepared by semisolid processing of ball-milled alloy chips with 2% of graphene platelets. Composites strengthened with graphene platelets show higher hardness and yield stress than the cast alloys, i.e., 160 MPa as compared to 90 MPa for as-cast alloy MgLi9Al1.5. Mechanical properties for MgLiAl-based composites were similar or higher than for composites based on conventional AZ91 or WE43 alloys. The strengthening however was not only due to the presence of graphene, but also phases resulting from the reaction between carbon and lithium, i.e., Li{sub 2}C{sub 2} carbide. Graphene platelets were located at globules boundaries resulting from semisolid processing for all investigated composites. Graphene platelets were in agglomerates forming continuous layers at grain boundaries in the composite based on the alloy MgLi4.5Al1.5. The shape of agglomerates was more complex and wavy in the composite based on MgLi9Al1.5 alloy most probably due to lithium–graphene reaction. Electron diffraction from the two-phase region α + β in MgLi9Al1.5 indicated that [001]α and [110]β directions are rotated about 4° from the ideal relationship [001] hex || [110] bcc phases. It showed higher lattice rotation than in earlier studies what is most probably caused by lattice slip and rotation during semisolid pressing causing substantial deformation particularly within the β phase. Raman spectroscopy studies confirmed the presence of graphene platelets within agglomerates and in addition the presence mainly of Li{sub 2}C{sub 2} carbides in composites based on MgLi4.5Al1.5 and Mg9Li1.5Al alloys. From the character of Raman spectra refinement of graphene platelets was found in comparison with their initial size. The graphene areas without carbides contain graphene nanoplatelets with lateral dimension close to initial graphene sample. Electron diffraction allowed to confirm the presence of Li{sub 2}C{sub 2} carbide at the surface of agglomerates found from Raman spectroscopy results.

36 MATERIALS SCIENCE↗

Fergusonite-type CeNbO{sub 4+δ}: Single crystal growth, symmetry revision and conductivity

Large fergusonite-type (ABO{sub 4}, A=Ce, B=Nb) oxide crystals, a prototype electrolyte composition for solid oxide fuel cells (SOFC), were prepared for the first time in a floating zone mirror furnace under air or argon atmospheres. While CeNbO{sub 4} grown in air contained CeNbO{sub 4.08} as a minor impurity that compromised structural analysis, the argon atmosphere yielded a single phase crystal of monoclinic CeNbO{sub 4}, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy conducted under argon found that stoichiometric CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. - Graphical abstract: Large fergusonite-type CeNbO{sub 4} crystals were prepared for the first time in a floating zone mirror furnace. Crystal growth in an argon atmosphere yielded a single phase monoclinic CeNbO4, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy found CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. Highlights: • Preparation of single crystals of CeNbO{sub 4} using a floating zone mirror furnace. • Correction to the crystal symmetry of the monoclinic form of CeNbO{sub 4}. • Report the conductivity of a single crystal of CeNbO{sub 4}.

36 MATERIALS SCIENCE↗