Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron correlation calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The 13C nuclear magnetic resonance in graphite intercalation compounds

The (13)C NMR chemical shifts of graphite intercalation compounds were calculated. For acceptor types, the shifts come mainly from the paramagnetic (Ramsey) intra-atomic terms. They are related to the gross features of the two-dimensional band structures. The calculated anisotropy is about -140 ppm and is independent of the finer details such as charge transfer. For donor types, the carbon 2p pi orbitals are spin-polarized because of mixing with metal conduction electrons, thus there is an additional dipolar contribution which may be correlated with the electronic specific heat. The general agreement with experimental data is satisfactory.

Tsang, T.↗
NASA NTRS1993

Low-frequency mobility response functions for the central plasma sheet with application to tearing modes

Consideration is given to the effect of constant cross-tail magnetic field By on the collisionless conductivity produced by chaotic scattering and stochastic diffusion of particles in the current sheet for a parabolic geometry. It is shown that the correlation time scales as (By/Bz)-squared, and from this strong By scaling a strong tendency toward stabilization of the linear tearing modes with increasing values of By is inferred. This effect of increased dawn-dusk mobility is particularly dramatic when electrons are introduced in the calculation, and is in agreement with the results of kinetic particle simulations. The collisionless conductivity is expressed in terms of the ensemble-averaged power spectrum of the single particle trajectories, which makes it possible to calculate directly the linear conductivity instead of deriving it from the calculation of the irreversible heating rates.

Hernandez, J.↗
NASA NTRS1992

Theoretical study of the alkaline-earth metal superoxides BeO2 through SrO2

Three competing bonding mechanisms have been identified for the alkaline-earth metal superoxides: these result in a change in the optimal structure and ground state as the alkaline-earth metal becomes heavier. For example, BeO2 has a linear 3Sigma(-)g ground-state structure, whereas both CaO2 and SrO2 have C(2v)1A1 structures. For MgO2, the theoretical calculations are less definitive, as the 3A2 C(2v) structure is computed to lie only about 3 kcal/mol above the 3Sigma(-)g linear structure. The bond dissociation energies for the alkaline-earth metal superoxides have been computed using extensive Gaussian basis sets and treating electron correlation at the modified coupled-pair functional or coupled-cluster singles and doubles level with a perturbational estimate of the triple excitations.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2020

Quasiparticle self-consistent G W band structure of CrN

The band structures of CrN are calculated using the quasiparticle self-consistent GW approach in both the low-temperature antiferromagnetic (AFM) [110] 2 Pmna orthorhombic phase and in a hypothetical ferromagnetic phase representing the paramagnetic cubic state in a saturating magnetic field. A gap of about 1 eV is found in the AFM state, while the ferromagnetic band structure is found to be half metallic. Another hypothetical AFM-1 structure [001] 1 is further considered and gives a smaller band gap. The orbital nature of the bands is studied and reveals a gap between Cr-d states, indicating a strongly correlated behavior. Here, optical dielectric functions are calculated from the interband transitions and compared to experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Applicability of Allen–Heine–Cardona Theory on MO x Metal Oxides and ABO 3 Perovskites: Toward High-Temperature Optoelectronic Applications [plus supplemental information]

We report characterizing the temperature-dependent electronic structures of optoelectronic materials is vital for their application in high-temperature processes. Allen–Heine–Cardona (AHC) theory is an established theory to determine the impact of electron–phonon coupling on the temperature renormalization of the electronic structure. A question of fundamental interest is how applicable this approach can be in a broad range of materials. Herein, we establish the consensus on the temperature dependence of band gaps between AHC predictions and experimental measurements, in a versatile set of nine MO x metal oxides and six ABO 3 perovskites that are utilized as gas sensors. Both calculations and measurements point to the appreciable band gap downshifts within the temperature range relevant to typical high-temperature applications in all examined materials. The correlation between the band gaps and temperatures was quantified at zero- and finite-temperature limits using the analytical parameters of the O’Donnell model. We found fairly comparative agreements between AHC- and experiment-derived parameters, especially for the parameters (S and $\langle\hbar$ω$\rangle$) defining the temperature dependence behavior of band gaps at the finite-temperature regime. Our findings provide important implications for the first-principles modeling of the electronic structures and their temperature dependency, which should be the focus toward high-temperature optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thorium Monosilicide, ThSi: An Experimental and Theoretical Study

The present theoretical and experimental combination study investigates the ThSi molecule in detail. Computationally, we utilized high-level multireference and coupled-cluster levels of theory conjoined with large correlation consistent basis sets to study a series of electronic and spin–orbit states of ThSi. Here, we report potential energy curves (PECs), electron configurations at equilibrium distances, spectroscopic constants, energetics, and spin–orbit coupling effects for 16 electronic states of ThSi. The studied 16 electronic states are arranged tightly within 0.9 eV, highlighting the complexity of the electronic spectrum of ThSi. The ground electronic state of ThSi is a single-reference 1 1 Σ + state that derives from the 1σ 2 2σ 2 1π 4 electronic configuration. The Ω = 0 + spin–orbit ground state of ThSi is composed of 1 1 Σ + (47%) and 13Π (44%) electronic states. Our measured bond energy (D0) of ThSi, obtained using resonant two-photon ionization (R2PI) spectroscopy is 3.146(4) eV, where the assigned error limit is given in parentheses in units of the last quoted digits. The computed D0 of ThSi (Ω = 0 + ) at the CBS-C-CCSD(T)-δT(Q)-δDK-δSO level (3.181 eV) is in good agreement with the experimental value. Our derived enthalpy of formation for ThSi, Δ f H 0K o (ThSi(g)), is 971.8(6.0) kJ/mol. Finally, we have performed density functional theory (DFT) calculations for ThSi(1 1 Σ + ) using 16 exchange correlation functionals that span multiple rungs of “Jacob’s ladder” of density functional approximation (DFA) to assess the DFT errors on D 0 , r e , and ω e of ThSi with respect to experimental and ab initio coupled-cluster values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spectroscopic Insight on Neodymium Solvation in Lithium Borohydride-Supported Electrolyte

Borohydride-based electrolytes have recently emerged as promising media for the electrodeposition of electropositive metals, including rare earth (RE) elements. While the presence of supporting alkali metal cations and RE counteranions provides essential electrochemical conductivity for achieving fast metal electrodeposition, interactions between the host ligand and solvated neodymium (Nd) complexes remain unclear. This study provides insights into the coordination structure of a concentrated and directly solvated Nd salt in a lithium borohydride-supported electrolyte. Our spectroscopic results indicate that the RE coordination environment is significantly influenced by the solvation mechanism, which can vary between metathesis and complexation pathways, primarily dictated by stoichiometric factors. Under dilute conditions, nearly complete metathesis of anions leads to a high coordination number for the host ligand (borohydride), consistent with the previously reported solvated Nd speciation in chlorine-free electrolytes. In contrast, concentrated dissolution of the Nd salt in the supported electrolyte is dominated by a complexation pathway featuring a Li-ion-paired complex with a low coordination number of the host ligand. Density functional theory (DFT) calculations indicated that the observed blue shift in the borohydride vibration was the result of an increase in electron density drawn into the terminal B–H interbond region from the hydride as the coordination changed from Li to Nd. In conjunction with DFT results, vibrational analyses allowed correlation of the experimental shifts associated with changes in Nd ligation and coordination spheres, further consolidating the prevalence of highly chloride-coordinated species under concentrated conditions. In conclusion, the outcomes of this work illuminate the distinctive and heterogeneous coordination structures that the electroactive RE species can adopt at high concentrations in lithium borohydride-supported electrolytes, as a key step to comprehend the reported metal electrodeposition performance in these media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Surface triggered stabilization of metastable charge-ordered phase in SrTiO 3

Charge ordering (CO), characterized by a periodic modulation of electron density and lattice distortion, has been a fundamental topic in condensed matter physics, serving as a potential platform for inducing novel functional properties. The charge-ordered phase is known to occur in a doped system with high d-electron occupancy, rather than low occupancy. Here, we report the realization of the charge-ordered phase in electron-doped (100) SrTiO 3 epitaxial thin films that have the lowest d-electron occupancy i.e., d 1 -d 0 . Theoretical calculation predicts the presence of a metastable CO state in the bulk state of electron-doped SrTiO 3 . Atomic scale analysis reveals that (100) surface distortion favors electron-lattice coupling for the charge-ordered state, and triggering the stabilization of the CO phase from a correlated metal state. This stabilization extends up to six unit cells from the top surface to the interior. Our approach offers an insight into the means of stabilizing a new phase of matter, extending CO phase to the lowest electron occupancy and encompassing a wide range of 3d transition metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cooper-pair density modulation state in an iron-based superconductor

Superconducting (SC) states that break space-group symmetries of the underlying crystal can exhibit nontrivial spatial modulation of the order parameter. Previously, such states were intimately associated with the breaking of translational symmetry, resulting in the density-wave orders, with wavelengths spanning several unit cells. However, a related basic concept has long been overlooked: when only intra-unit-cell symmetries of the space group are broken, the SC states can show a distinct type of nontrivial modulation preserving long-range lattice translation. Here, in this study, we refer to this new concept as the pair density modulation (PDM) and report the first observation of a PDM state in exfoliated thin flakes of the iron-based superconductor FeTe 0.55 Se 0.45 . Using scanning tunnelling microscopy (STM), we discover robust SC gap modulation with the wavelength corresponding to the lattice periodicity and the amplitude exceeding 30% of the gap average. Notably, we find that the observed modulation originates from the large difference in SC gaps on the two nominally equivalent iron sublattices. The experimental findings, backed up by model calculations, suggest that, in contrast to the density-wave orders, the PDM state is driven by the interplay of sublattice symmetry breaking and a peculiar nematic distortion specific to the thin flakes. Our results establish new frontiers for exploring the intertwined orders in strong-correlated electronic systems and open a new chapter for iron-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Ab Initio modeling of Near-Edge EELS spectra for chemisorbed molecules

Abstract Electron energy loss spectroscopy (EELS) has recently been applied to probe chemisorbed molecules on metal nanostructures, but a fundamental understanding of the correlation between these spectra and the electronic structures of the adsorbates has been limited. We report here on the insights afforded by time-dependent density functional theory to decipher the energy loss near edge structure (ELNES) of EELS spectra associated with chemisorption. These first-principles calculations simulate the ELNES-EELS spectra for chemisorbed CO on various facets of Au and Pt. Computational predictions of key signatures such as the ‘red shift’ and reductions in the peak intensity of the 2 π * and 6 σ * peaks, as compared to free CO in the gas phase, are validated in comparison to experimentally collected EELS spectra. These signatures are revealed to arise from changes in the electronic structure in terms of unoccupied density of states associated with the chemisorption process. They are consistent with a Blyholder model that incorporates donation and back-donation of electrons. They are also characteristic of the chemisorption process, such as the choice of metal, site of adsorption and the coverage and distribution of adsorbates. Our simulations thus provide guidelines for the use of ELNES-EELS to characterize the atomic structure and adsorption property of nanostructured surfaces and facilitate the development of advanced nanomaterials for catalytic applications.

Materials Science↗
DOE OSTI2021

Synthesis of borophane polymorphs through hydrogenation of borophene

Synthetic two-dimensional polymorphs of boron, or borophene, have attracted attention because of their anisotropic metallicity, correlated-electron phenomena, and diverse superlattice structures. Although borophene heterostructures have been realized, ordered chemical modification of borophene has not yet been reported. Here, we synthesize “borophane” polymorphs by hydrogenating borophene with atomic hydrogen in ultrahigh vacuum. Through atomic-scale imaging, spectroscopy, and first-principles calculations, the most prevalent borophane polymorph is shown to possess a combination of two-center–two-electron boron-hydrogen and three-center–two-electron boron-hydrogen-boron bonds. Borophane polymorphs are metallic with modified local work functions and can be reversibly returned to pristine borophene through thermal desorption of hydrogen. Hydrogenation also provides chemical passivation because borophane reduces oxidation rates by more than two orders of magnitude after ambient exposure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improved Predictive Tools for Structural Properties of Metal–Organic Frameworks

The accurate determination of structural parameters is necessary to understand the electronic and magnetic properties of metal–organic frameworks (MOFs) and is a first step toward accurate calculations of electronic structure and function for separations and catalysis. Theoretical structural determination of metal-organic frameworks is particularly challenging because they involve ionic, covalent, and noncovalent interactions, which must be treated in a balanced fashion. Here, we apply a diverse group of local exchange-correlation functionals (PBE, PBEsol, PBE-D2, PBE-D3, vdW-DF2, SOGGA, MN15-L, revM06-L, SCAN, and revTPSS) to a broad test set of MOFs to seek the most accurate functionals to study various structural aspects of porous solids, in particular to study lattice constants, unit cell volume, two types of pore size characteristics, bond lengths, bond angles, and torsional angles). The recently developed meta functionals revM06-L and SCAN, without adding any molecular mechanics terms, are able to predict more accurate structures than previously recommended functionals, both those without molecular mechanics terms (PBE, PBEsol, vdW-DF2, and revTPSS) and those with them (PBE-D2 and PBE-D3). To provide a broader test, these two functionals are also tested for lattice constants and band gaps of unary, binary, and ternary semiconductors.

36 MATERIALS SCIENCE↗
NASA NTRS1985

C-13 nuclear magnetic resonance in graphite intercalation compounds

The C-13 NMR chemical shifts of graphite intercalation compounds have been calculated. For acceptor types, the shifts come mainly from the paramagnetic (Ramsey) intra-atomic terms. They are related to the gross features of the two-dimensional band structures. The calculated anisotropy is about - 140 ppm and is independent of the finer details such as charge transfer. For donor types, the carbon 2p pi orbitals are spin-polarized because of mixing with metal-conduction electrons, thus there is an additional dipolar contribution which may be correlated with the electronic specific heat. The general agreement with experimental data is satisfactory.

Tsang, T.↗
DOE OSTI2023

Triple Excitations in Green’s Function Coupled Cluster Solver for Studies of Strongly Correlated Systems in the Framework of Self-Energy Embedding Theory

Embedding theories became important approaches used for accurate calculations of both molecules and solids. In these theories, a small chosen subset of orbitals is treated with an accurate method, called an impurity solver, capable of describing higher correlation effects. Ideally, such a chosen fragment should contain multiple orbitals responsible for the chemical and physical behavior of the compound. Handling a large number of chosen orbitals presents a very significant challenge for the current generation of solvers used in the physics and chemistry community. Here, we develop a Green’s function coupled cluster singles doubles and triples (GFCCSDT) solver that can be used for a quantitative description in both molecules and solids. This solver allows us to treat orbital spaces that are inaccessible to other accurate solvers. At the same time, GFCCSDT maintains high accuracy of the resulting self-energy. Moreover, in conjunction with the GFCCSD solver, it allows us to test the systematic convergence of computational studies. Developing the CC family of solvers paves the road to fully systematic Green’s function embedding calculations in solids. In this paper, we focus on the investigation of GFCCSDT self-energies for a strongly correlated problem of SrMnO 3 solid. Subsequently, we apply this solver to solid MnO showing that an approximate variant of GFCCSDT is capable of yielding a high accuracy orbital resolved spectral function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interplay of broken symmetry and delocalized excitations in the insulating state of 1 T –Ta⁢S 2

Coexistence of localized and extended excitations is central to the macroscopic properties of correlated materials. For 5⁢d transition-metal compounds, electron correlations alone generally do not lead to a metal-insulator (Mott) transition, with insulating behavior usually resulting from their coupling with magnetic ordering and/or structural distortions. 1⁢T–Ta⁢S 2 is a prototypical example of such correlated insulating behavior, with a high-symmetry metallic phase transforming into a distorted, charge-density wave (CDW) insulating state at low temperatures. The nature of the insulating phase as well as the existence and relevance of the localized electron physics remains debated. We resolve this standing controversy in 1⁢T–Ta⁢S 2 combining resonant inelastic x-ray spectroscopy and first-principles calculations. We observe five electronic excitations arising from the interband transitions of the Ta 5d orbitals and the S 3⁢p ligand state, with none of the excitations on the order of the Mott gap. These excitations cannot be explained within the framework of standard multiplet calculations that assume a localized wave function, but instead, are captured by a band-theory framework accounting for the low symmetry of the crystal field in the CDW state. Our findings suggest that the electronic properties of 1T–Ta⁢S 2 are dominated in the visible by both plasmonic quasiparticles and interband transitions, with no resonance associated with a putative Mott transition observed in the 0–3 eV energy range. Finally, our discovery provides insights into the electron localization and the Mott vs band-insulator debate in 1T–Ta⁢S 2 and other transition-metal materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Femtosecond Nonadiabatic Confinement of Molecular Dication Yield

Doubly charged molecular cations often carry signatures of electronic correlation and electron–nuclear entanglement present in the parent cation. Here, we produce ethylene dications using a combination of an extreme ultraviolet pump and near-infrared probe pulses, observing a peak in the dication yield at a pump–probe delay of approximately 15 fs. Ab-initio calculations, which explicitly take into account coupled electron–nuclear dynamics induced by the pump and the multiphoton nature of the probe-induced ionization step, reproduced the observed delay in the yield. It originates from resonant enhancement of the multiphoton ionization of the electronically excited ethylene cation as the carbon–carbon double bond expands. However, this effect is tempered by rapid nonadiabatic relaxation of the excited ionic states. Our results suggest a general mechanism whereby ultrafast nonadiabatic relaxation of a molecular ion can compete with its strong-field ionization rate, confining the dication yield to a narrow temporal window of a few femtoseconds.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Systematic Bandgap Engineering of a 2D Organic–Inorganic Chalcogenide Semiconductor via Ligand Modification

Hybrid organic–inorganic semiconductors present new opportunities for optoelectronic materials design not available in all-organic or all-inorganic materials. One example is silver phenylselenide (AgSePh) – or “mithrene” – a blue-emitting 2D organic–inorganic semiconductor exhibiting strong optical and electronic anisotropy. Here, we show that the bandgap of mithrene can be systematically tuned by introducing electron-donating and electron-withdrawing groups to the phenyl ligands. We synthesized nine mithrene variants, eight of which formed 2D van der Waals crystals analogous to those of AgSePh. Density functional theory calculations reveal that these 2D mithrene variants are direct-gap or nearly direct gap semiconductors. Furthermore, we identify correlations between the optical gap and three experimental observables – the Hammett constant, 77 Se chemical shift, and selenium partial charge – offering predictive power for bandgap tuning. These findings highlight new opportunities for applying the tools of chemical synthesis to semiconductor materials design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Intermetallic alloy structure–activity descriptors derived from inelastic X-ray scattering

Synchrotron spectroscopy and Density Functional Theory (DFT) are combined to develop a new descriptor for the stability of adsorbed chemical intermediates on metal alloy surfaces. This descriptor probes the separation of occupied and unoccupied d electron density in platinum and is related to shifts in Resonant Inelastic X-ray Scattering (RIXS) signals. Simulated and experimental spectroscopy are directly compared to show that the promoter metal identity controls the orbital shifts in platinum electronic structure. The associated RIXS features are correlated with the differences in the band centers of the occupied and unoccupied d bands, providing chemical intuition for the alloy ligand effect and providing a connection to traditional descriptions of chemisorption. The ready accessibility of this descriptor to both DFT calculations and experimental spectroscopy, and its connection to chemisorption, allow for deeper connections between theory and characterization in the discovery of new catalysts.

36 MATERIALS SCIENCE↗