Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXCAVATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Shock effects from a large impact on the moon

The paper calculates the shock and shear deformation-induced internal energy distribution associated with a major basin-forming hypervelocity meteorite impact on the moon. The Hageman and Walsh formulation of the axisymmetric two-dimensional conservation equations in finite difference form is used, and the flow field induced upon impact of an iron meteorite traveling at 15 km/sec with a gabbroic anorthosite lunar crust is calculated for sequential time steps over a grid of hoop-shaped zones fixed in space. If an energy of 5 times 10 to the 32nd power ergs for the projectile energy is required to excavate a basin of Imbrium size, than a flow field of approximately 210 km in radius approximately 19 seconds after impact is indicated. The meteorite residue, the melt, and the ejecta are discussed, and the results are compared with the Gault and Heitowit (1963) formulation.

Okeefe, J. D.↗

Stratigraphic correlation of the radar-detected subsurface interface in Mare Crisium

The delineation of spectrally distinct units in Mare Crisium allows a more complete interpretation of the single subsurface interface detected by the Apollo lunar sounder experiment. This interface is approximately 1400 m below the surface in the central mare region of Crisium, and 1000 m below the surface in the eastern bench region. Based on the power of the returned signal, and the small difference in dielectric constant of returned lunar basalts, it is probable that this interface represents a buried regolith between two major basin-filling episodes. The contact between spectral Units 1 and 2 is the most likely cause for the radar-reflecting interface. Based on this model, the thickness of Unit 3 is 400 m in the eartern part of the mare, and that of Unit 2 is 1000 m. Estimates of the original depth/diameter relations of Pierce are consistent with excavation of an older basalt from below a depth of 1400 m.

Maxwell, T. A.↗

Extraterrestrial materials processing and construction

Applications of available terrestrial skills to the gathering of lunar materials and the processing of raw lunar materials into industrial feed stock were investigated. The literature on lunar soils and rocks was reviewed and the chemical processes by which major oxides and chemical elements can be extracted were identified. The gathering of lunar soil by means of excavation equipment was studied in terms of terrestrial experience with strip mining operations on earth. The application of electrostatic benefication techniques was examined for use on the moon to minimize the quantity of materials requiring surface transport and to optimize the stream of raw materials to be transported off the moon for subsequent industrial use.

Criswell, D. R.↗

Evidence for a high-magnesium subsurface basalt in Mare Crisium from orbital X-ray fluorescence data

Orbital X-ray fluorescence data taken by the Apollo 15 mission over Mare Crisium are analyzed in order to detect surface occurrences of the magnesium-rich materials found in the Luna 24 core sample. Apollo 15 data of the surface soils of the Luna 24 landing site, expressed as Al/Si and Mg/Si ratios, are found to be well correlated with the composition of the less than 74 micron fraction of the core sample. Orbital data indicate that most surface areas of the southern part of Mare Crisium have magnesium contents lower than or equal to that of the landing site, with the exception of areas in the vicinities of the post-mare craters Picard and Pierce and an area northeast of the Luna 24 site. The crater material is interpreted to be a magnesium-rich subsurface basalt excavated by crater formation, which may represent the material from which magnesium-rich Luna 24 samples, including olivine gabbro and olivine vitrophyre, were derived.

Andre, C. G.↗

Emplacement of Fahrenheit crater ejecta at the Luna-24 site

The likelihood that the gabbroic and monomineralic fragments in the Luna-24 soils were excavated during the Fahrenheit cratering event can be assessed by considering the quantity, characteristics, and mode of deposition of Fahrenheit ejecta in the vicinity of the Luna-24 site. The original morphology of Fahrenheit's ejecta deposits is inferred by examining a fresh crater, Lichtenberg B, of a comparable site that formed in a similar type of target material. On the basis of this analogy, a probability of over 80% was calculated that the Luna-24 site was morphologically disturbed by the deposition of Fahrenheit ejecta. The relative abundance, gabbroic composition, and unshocked character of the holocrystalline fragments discovered in the Luna-24 core sample are consistent with the widespread occurrence of Fahrenheit deposits and the characteristics of Fahrenheit ejecta anticipated at the Luna-24 range.

Settle, M.↗

The bearing of spinel cataclasites on the crust-mantle structure of the moon

Subsolidus thermodynamic calculations have been made to define the temperature and pressure conditions required to equilibrate lunar spinel cataclasites (olivine + high alumina orthopyroxene + pleonaste spinel + plagioclase + or - cordierite) that occur as clasts in 15445, 73263, and 72435. The results, which are subject to modification by improved thermodynamic data and experiment, indicate that those samples that are cordierite-free and of high Mg/(Mg + Fe) were derived from the lower crust and possibly from a high-velocity zone of the uppermost mantle. However, the cordierite-bearing type in 72435,8 /low Mg/(Mg + Fe)/ resided in the upper levels of the crust prior to excavation by impact. Consideration of the relevant supersolidus phase equilibria indicates that the whole-rock chemistry of all spinel cataclasites can only be explained by pleonaste spinel accumulation. These materials are interpreted to be primordial cumulate rocks formed during the differentiation of the lunar magma ocean.

Herzberg, C. T.↗

Depositional and surface exposure history of the Shorty Crater core 74001/2 - FMR and magnetic studies

Surface exposure (maturity) indices and concentrations of FeO and metallic iron were determined at 0.5-cm intervals of the Apollo 17 core section, which sampled a pyroclastic deposit on the rim of Shorty Crater. The determinations showed that all of the soil in the core is extremely immature. An exposure history of the core is proposed: accumulation (about 3.6 billion years ago), shallow burial (during the first 20 million years), deep burial (till about 10-15 million years ago), followed by excavation (10-15 million years ago), and in situ reworking (till the present).

Morris, R. V.↗

West Clearwater, Quebec impact structure. I - Field geology, structure and bulk chemistry. II - Petrology

A field study at the 30-km-diameter West Clearwater impact crater was carried out during the summer of 1977 to identify the nature of the flow of impact melt and less shocked debris during the excavation stage of the cratering process. The present paper investigates: (1) comparisons with other impact craters and lunar samples; (2) generation and emplacement mechanisms of impact melts and associated clastic debris; and (3) the geometry of the transient cavity and the pristine morphology of the crater.

Simonds, C. H.↗

Lunar KREEP volcanism - Geologic evidence for history and mode of emplacement

The history of KREEP basalt emplacement in the Fra Mauro and Imbrium basin regions was investigated on the basis of the petrologic and geochemical characteristics of Apollo 14 and 15 samples and data from photogeologic, site geology and remote sensing studies. Results suggest that KREEP emplacement began after the excavation of the South Imbrium basin more than 4.0 to 4.1 billion years ago, continued into early to mid-Imbrium, and was in part sychronous with mare volcanism. Surface KREEP activity appears to be concentrated in a triangular area bounded by the Apollo 15 site, southern Procellarum and the Aristarchus region. Most of the Apollo 15 igneous KREEP basalts are products of post-Imbrium KREEP volcanism within the Imbrium basis, whereas the Apollo 14 KREEP-rich breccias represent extensively reworked KREEP volcanics extruded prior to about 4.0 to 4.1 billion years ago.

Hawke, B. R.↗

Characteristics of the cratering process on small satellites and asteroids

Photographs of the two known natural satellites of Mars - Phobos and Deimos - illustrate the importance of impact cratering in the postformational histories of the two moons and, by inference, the asteroids and other small planetary satellites. The objectives of the present study are to investigate qualitatively the impact cratering process on small bodies, to apply some of these considerations to the observed surfaces of Phobos and Deimos, and to consider the asteroids briefly in the light of these results. The cratering process on small bodies is discussed in three stages: compression, excavation, and modification. Nonescaping and escaping ejecta are considered.

Cintala, M. J.↗

Experimental studies of oblique impact

Meteoritic materials most probably impact planetary bodies along oblique trajectories inclined less than 45 deg above their surfaces. Laboratory studies of hypervelocity impacts against rock and particulate media are presented that indicate important effects of obliquity on crater size, shape, and ejecta distribution. The effects are particularly important to crater size-frequency analyses and geologic interpretations of crater formations. Impacts at shallow incidence, which are not uncommon, lead to ricochet of the impacting object accompanied with some entrained excavated materials at velocities only slightly reduced from the pre-impact value.

Gault, D. E.↗

The role of rim slumping in the modification of lunar impact craters

The role of rim slumping in the formation of terraces on interior crater walls and consequent modifications of the shapes of large lunar impact craters is evaluated. Impact excavation cavities were reconstructed by means of a terrace restoration model for twelve lunar craters ranging in diameter from 19 to 137 km. For craters up to 30 km, reconstructed cavity depths are comparable to or greater than cavity depths extrapolated from nonterraced smaller craters, and in the 30 to 70 km diameter range, the reconstructed cavity depths are significantly greater. For craters larger than 70 km, however, the reconstructed cavity depths are consistently less than those predicted from small crater morphometry, indicating a significant additional contribution from ejecta fallback and basement rebound to the modification of the shape of impact craters greater than 70 km.

Settle, M.↗

Geology of the lunar farside crater Necho

The ejecta morphology and distribution as well as the interior materials of the 30-km-diameter, Necho lunar crater is discussed and the effects of regional preimpact topography on the formation structure and modification of the crater are described. Three types of ejecta: hummocky, lineated, and smooth, that are concentrated in a band extending from the rim crest to a distance of less than one crater diameter are examined. The crater's interior, divided into floor units of textured, bubbled, and smooth material is analyzed and hypotheses of their origin are presented. The last area of study is the preimpact setting, characterized by a series of large, degraded, pre-Nectarian craters. Results showed that the Necho, in comparison with surrounding craters, was the freshest, insuring that the data from its excavation was preserved without a significant amount of degradation.

Gifford, A. W.↗

Atmospheric effects on Martian ejecta emplacement

The paper presents analytical descriptions of crater growth and numerical calculations of aerodynamic drag to evaluate the possible effects of drag on impact crater ejecta emplacement on Mars. The critical particle size below which ejecta deposition is restricted in range increases with crater size; models of ejecta trajectories in the current Martian atmosphere under hydrostatic equilibrium reveal critical particle diameters ranging from 0.4 to 20 cm, noting that ejecta approaching the critical particle size may impact with crater radius of the excavation crater rim. Ejecta larger than the critical particle size are undecelerated and form secondary impact craters modified by the later arriving decelerated ejecta cloud; thus, ejecta emplacement will be multiphased, but the process depends on the ejecta size distribution.

Schultz, P. H.↗

The Apollo 17 drill core - Petrologic systematics and the identification of a possible Tycho component

Modal data support a five-unit stratigraphy for the Apollo 17 drill core. The upper unit E (0-22 cm depth) is marked by high content of fused soil, brown glass, and mare basalt fragments. This unit corresponds with a portion of the core excavated and refilled within the last 2 m.y. The underlying unit D (22071 cm depth) has a low abundance of fused soil (i.e., low maturity) and is rich in coarse (less than 200 microns) mare fragments. A large section of the core, unit C (71-224 cm depth), is finer-grained, more mature (richer in agglutinates), more feldspathic and has more highland lithic, mineral and glass fragments than unit D. The next underlying unit, B (224-256 cm depth), has yellow/colorless KREEP glasses with a high Si, low-alkali composition unlike the common Apollo 15 or Apollo 17 KREEP series. The petrologic (fused soil) and Is/FeO maturity of this layer is also lower than the units above and below. The deepest unit, A (256-284 cm depth), is marked by its relatively higher maturity and lower yellow/colorless KREEP glass content. The most prominent petrographic/stratigraphic indicators are the pyroxene-rich immature mare unit D and the abundance of KREEP glass in unit B. This KREEP glass is distinctive petrographically and compositionally, and is probably exotic to the Apollo 17 site. It is suggested here that the KREEP glass in unit B is derived from Tycho, which implies widespread distribution of KREEP on the lunar nearside.

Vaniman, D. T.↗

History of the Apollo 17 deep drill string during the past few million years

Measurements of the cosmogenic radionuclides 22-Na, 26-Al and 53-Mn in the Apollo 17 deep drill string 70002-70009 have shown that this core sample was taken in an area of considerable recent surface activity. Measurements of 22-Na indicate that the core had not been significantly altered during its collection and subsequent handling, while measurements of the 26-Al and 53-Mn showed a very substantial excess in these isotopes in the top 25 cm and a depletion below about 50 cm. The analysis of the data indicates that a crater excavation occurred to a depth of 50 to 60 cm at the site of the deep drill string no longer that 0.5 m.y. ago, and probably 0.3 m.y. ago. Since that time, the crater has filled to a depth of about 25 cm with near-surface material which contains high concentrations of 26-Al and 53-Mn. This recent activity at the site of the Apollo 17 drill string places firm time constraints on the models developed by other investigators which describe the history of this site.

Fruchter, J. S.↗

Are early magnesium-rich basalts widespread on the moon

Orbital X-ray data indicate that high-magnesium material systematically occurs along mare/terra boundaries in all the lunar nearside basins for which there is orbital X-ray coverage. These peripheral units appear to represent the earliest stages of volcanism within each of the basins, although they were not necessarily emplaced at the same time in lunar history. High-magnesium subsurface layers excavated by post-mare impact craters in central Mare Crisium and Mare Fecunditatis suggest that the peripheral units are the only visible edges of a basin-wide basalt layer, largely buried by younger less-magnesian flows. This evidence suggests that early magnesium-rich mare basalts are widespread on the moon and that their volumes may be greatly underestimated. Abundant early mare deposits of this type would place severe constraints on models of mare basalt petrogenesis.

Andre, C. G.↗

Structural deformation at the Flynn Creek impact crater, Tennessee - A preliminary report on deep drilling

The geologic and core drilling studies described in the present paper show that the Flynn Creek crater has such distinctive morphological features as a broad flat hummocky floor; large central peak; locally terraced crater walls; uplifted, as well as flat-lying rim segments; and a surrounding ejecta blanket. The major structural features include a shallow depth of total brecciation and excavation as compared with apparent crater diameter; a thin breccia lens underlain by a thin zone of disrupted strata; concentric ring fault zones in inner rim, beneath crater wall, and outer crater floor regions; a large central uplift underlain by a narrow dipping zone of deeply disrupted strata; faulted, folded, brecciated, and fractured rim strata; and uplifted rim strata, which dip away from the crater, and flat-lying rim strata, which terminate as inward dipping rocks.

Roddy, D. J.↗