Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drive systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Experimental investigation of the small-scale prototype of the dew point water recovery system

The article presents experimental investigation of the Dew Point Water Recovery (DPWR) system designed for clean water recovery using the dew point cooling phenomenon. The technology is a novel distillation process which allows for highly efficient water recovery. It is a first distillation technology which allows for water distillation through direct contact with atmospheric air. The authors designed, built, and tested an original prototype of a laboratory-scale DPWR system to verify its basic operating principles and perform performance analysis. It was shown that on average 10 × 10 −6 m 3 of clean water could be recovered from each cubic meter of the supply air with an average GOR of 1.9. Although the operation of the DPWR system requires electricity to drive fans, pumps and other associated equipment, the actual driving force of the system is thermal energy. The average thermal energy demand of the DPWR system was 370 kWh/m 3 , and more than half of this energy was based on the thermodynamic potential of the supply air. Based on experimental data, the mathematical model of the DPWR system was verified and it was found that the average relative discrepancy in predicting air temperature did not exceed 8%, and in predicting air humidity: 5%. In conclusion, the conducted experiments confirmed that the proposed DPWR system is feasible and has the potential to fill the technological gap in terms of a low-energy and easily accessible water recovery method.

42 ENGINEERING↗
DOE OSTI2026

Binder-jetted AISI M2 tool steel during hot isostatic pressing: Densification and carbide transformation

Binder jetting (BJ) enables fabrication of complex components from high-alloy steels such as AISI M2; however, residual porosity after sintering limits mechanical performance. This study investigates the coupled effects of binder chemistry, sintering conditions, cooling rate, and subsequent hot isostatic pressing (HIP) on densification, microstructure, and mechanical response in binder-jetted M2 tool steel. HIP increased relative density from ∼93 to 95% to >99% and improved compressive strength by ∼40-70%. Densification was governed by initial pore morphology, where closed porosity was effectively eliminated, while interconnected porosity limited full consolidation. Microstructural analysis (XRD, EBSD, SEM) shows that HIP promotes dissolution of metastable carbides and redistribution of alloying elements (W, Mo, V), transforming heterogeneous carbide networks into finer and more uniformly distributed M 2 C, MC, and M 6 C phases through diffusion-assisted homogenization. Among the investigated conditions, the FluidFuse binder combined with sintering at 1270 °C for 60 min and furnace cooling produced the most balanced response, achieving ∼99.7% density, ∼855 HV hardness, ∼4130 MPa compressive strength, and ∼24% strain. In contrast, higher sintering temperatures promoted carbide coarsening, reducing ductility despite high density. HIP reduces microstructural heterogeneity and drives the system toward a near-equilibrium state with reduced sensitivity to prior processing history. A comparative assessment with conventional and additive manufacturing routes (LPBF, DED, EBM, FFF) shows that the BJ-HIP approach achieves competitive densification and mechanical performance. These findings provide a mechanistic basis for controlling densification and microstructure in high-alloy steels processed via BJAM.

AISI M2 tool steel↗
DOE OSTI2021

A linked-scale coupled model of mass erosion and redistribution in plasma-exposed micro-foam surfaces

Surface evolution due to exposure to harsh environments is of importance in many scientific and technological applications. In plasma-exposed materials, the surface receives charged particles from the plasma, leading to a series of processes that drive the system far from equilibrium and may lead to the severe deterioration of the surface properties. Although surface morphological changes are driven by atomic collisions taking place over picoseconds and nanometers, these processes result in mass loss and redistribution of matter over much larger length and time scales. This necessitates a multi-scale approach capable of capturing the range of processes linking primary atomic collision events with engineering-level surface geometry changes. In this paper, we develop a computational model to simulate the morphological evolution and effective erosion rate of micro-architected tungsten foams during low-energy plasma ion bombardment. Furthermore, the model acts on several length scales, with the energy and angular dependence of the sputtering yield of flat tungsten surfaces determined using the SRIM code based on the binary collision approximation. This information is introduced into a low-fluence, short-term Monte Carlo raytracing model, and further into a high-fluence, long-term particle transport model. In the latter, material particles representing billions of atoms are described in a digitized 3-D representation of the foam structure from X-ray tomography data, and are sputtered off and redeposited using the atomistic information. We show that the redeposition of sputtered atoms leads to partial self-healing in the bottom layers with a sharp reduction in the sputtering coefficient of low density foams, roughly 25% of the solid W value. This is in qualitative agreement with recent experiments on low porosity W structures. At high fluence, the foam structure degrades considerably as there are fewer ligaments available to recapture sputtered atoms and, consequently, the sputtering rate increases again.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Control of wakefield in sub-THz dielectric-lined waveguides using multiple-bunch excitation

Beam-driven wakefield accelerators offer the potential to achieve accelerating fields approaching the sub-GV/m range, paving the way for compact and cost-effective next-generation high-energy colliders. This method typically employs a two-bunch system: a drive bunch that excites an electromagnetic wakefield in a solid-state or plasma medium, and a witness bunch that extracts energy from the wake for acceleration. Our research focuses on two key challenges in wakefield acceleration using structures. First, we investigate strategies to suppress transverse instabilities by employing non-cylindrical geometries that damp dipole modes. Second, we explore methods to precisely terminate the wakefield after the interaction region, thereby improving the efficiency of energy transfer. This paper presents detailed simulation results and the corresponding experimental design developed to validate these concepts. Furthermore, the proposed experiment will be carried out at the Argonne Wakefield Accelerator (AWA) facility, focusing on controlling wakefield duration through tailored drive and witness bunch configurations and evaluating dielectric-lined structures with non-cylindrical cross sections.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Amorphous nonstoichiometric oxides with tunable room-temperature ferromagnetism and electrical transport

Material functionalities strongly depend on the stoichiometry, crystal structure, and homogeneity. Here we demonstrate an approach of amorphous nonstoichiometric inhomogeneous oxides to realize tunable ferromagnetism and electrical transport at room temperature. In order to verify the origin of the ferromagnetism, we employed a series of structural, chemical, and electronic state characterizations. Combined with electron microscopy and transport measurements, synchrotron-based grazing incident wide angle X-ray scattering, soft X-ray absorption and circular dichroism clearly reveal that the room-temperature ferromagnetism originates from the In 0.23 Co 0.77 O 1-v amorphous phase with a large tunable range of oxygen vacancies. The room-temperature ferromagnetism is tunable from a high saturation magnetization of 500 emu cm -3 to below 25 emu cm -3 , with the evolving electrical resistivity from 5 × 10 3 μΩ cm to above 2.5 × 10 5 μΩ cm. Inhomogeneous nano-crystallization emerges with decreasing oxygen vacancies, driving the system towards non-ferromagnetism and insulating regime. Our work unfolds the novel functionalities of amorphous nonstoichiometric inhomogeneous oxides, which opens up new opportunities for developing spintronic materials with superior magnetic and transport properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Experimental Investigation of Uranium and Iron Condensation from High-Temperature Plasma Conditions

We used a plasma flow reactor (PFR) to generate synthetic fallout nanoparticles from vapor-phase condensation of two different input concentrations of uranium and iron analytes (U/Fe = 1:1 and 1:2). Synthetic fallout from complex chemical matrices (e.g., mixtures of U and Fe) has not been generated in this setup before and allows for the observation of relative condensation and fractionation of nuclear debris. Experiments were conducted under two different temperature histories with variations in particle flow patterns along the PFR. Transmission electron microscopy (TEM) observation and analysis of the nanoparticles revealed variations in speciation of uranium oxides (UO 2 and α-UO 3 ) depending on the competition between flow mixing and oxygen sequestration by iron. A ternary metal oxide, UFeO 4 , was observed in addition to iron oxides (e.g., FeO and Fe 3 O 4 ), which suggests that fallout models should account for chemical speciation of ternary metal oxides (i.e., UFeO 4 ) and their relative condensation behaviors in addition to those of singular metal oxides (e.g., FeO and UO 2 ). X-ray Energy Dispersive Spectroscopy (EDS) elemental maps showed that some particles had Fe-rich cores surrounded by U-rich regions. This suggests that either condensed U oxides coagulate onto molten Fe oxides or that the increase in iron analyte concentration might drive the system toward a higher degree of supersaturation, leading to earlier formation of iron oxide particles and providing an energetically favored pathway for nucleation of uranium oxides around iron oxide particles.

and nuclear chemistry↗
DOE OSTI2026

Ferromagnetic Insulator to Metal Transition in Noncentrosymmetric Graphene Nanoribbons

Engineering sublattice imbalance within the unit cell of bottom-up synthesized graphene nanoribbons (GNRs) represents a versatile tool for realizing custom-tailored quantum nanomaterials. The interaction between low-energy zero-modes (ZMs) not only contributes to frontier bands but can form the basis for magnetically ordered phases. Here, we present the bottom-up synthesis of a noncentrosymmetric GNR that places all ZMs on the majority sublattice sites. Scanning tunneling microscopy and spectroscopy reveal that strong electron–electron correlations, leading to the Stoner magnetic instability, drive the system into a ferromagnetically ordered insulating ground state featuring a sizable band gap of E g ∼1.2 eV. At higher temperatures, a chemical transformation induces an insulator-to-metal transition that quenches the ferromagnetic order. Tight-binding (TB), density functional theory, and GW calculations corroborate our experimental observations. Furthermore, this work showcases how control over molecular symmetry, sublattice polarization, and ZM hybridization in bottom-up synthesized nanographenes can open a path to the exploration of many-body physics in rationally designed quantum materials.

Band structure↗
DOE OSTI2026

Re-entrant unconventional superconductivity induced by rare-earth substitution in Nd 1-x Eu x NiO 2 thin films

High temperature superconductivity is typically associated with strong coupling and a large superconducting gap, yet these characteristics have not been demonstrated in the nickelates. Here, we provide experimental evidence that Eu substitution in the spacer layer of Nd 1-x Eu x NiO 2 (NENO) thin films enhances the superconducting gap, driving the system toward a strong-coupling regime. This is accompanied by a magnetic-exchange-driven magnetic-field-enhanced superconductivity. We investigate the upper critical magnetic field, H c2 , and the superconducting gap of superconducting NENO thin films with x = 0.2 to 0.35. Magnetoresistance measurements reveal magnetic-field-enhanced superconductivity in NENO films. We interpret this phenomenon as a result of an interaction between magnetic Eu ions and superconducting states in the Ni d x2-y2 orbital. The upper critical magnetic field strongly violates the weak-coupling Pauli limit. Infrared spectroscopy confirms a large gap-to-Tc ratio $2\Delta /{k}_{B}{T}_{{\rm{c}}}\simeq 5-6$, indicating a stronger coupling pairing mechanism in NENO relative to the Sr-doped NdNiO 2 . The substitution of Eu in the rare-earth layer causes pronounced modifications of the superconducting gap and magnetic interactions in Nd-based nickelates, opening new pathways to engineer high- T c superconductivity in infinite-layer nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Robust and tunable Weyl phases by coherent infrared phonons in ZrTe5

Abstract Ultrafast control of structural and electronic properties of various quantum materials has recently sparked great interest. In particular, photoinduced switching between distinct topological phases has been considered a promising route to realize quantum computers. Here we use first-principles and effective Hamiltonian methods to show that in ZrTe 5 , lattice distortions corresponding to all three types of zone-center infrared optical phonon modes can drive the system from a topological insulator to a Weyl semimetal. Thus achieved Weyl phases are robust, highly tunable, and one of the cleanest due to the proximity of the Weyl points to the Fermi level and a lack of other carriers. We also find that Berry curvature dipole moment, induced by the dynamical inversion symmetry breaking, gives rise to various nonlinear effects that oscillate with the amplitude of the phonon modes. These nonlinear effects present an ultrafast switch for controlling the Weyltronics-enabled quantum system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Pressure-induced structural phase transitions in CrSBr

There is growing interest in combining chemical complexity with external stimuli like pressure, field, and light for property control in van der Waals solids. This is because extreme conditions trigger the development of new states of matter and functionality. In this work, we bring together synchrotron-based infrared absorption, Raman scattering, and diamond anvil cell techniques with first-principles calculations of the lattice dynamics and energy landscape to reveal the series of structural phase transitions in CrSBr. By tracking how the phonons change under pressure, we uncover a remarkable chain of complex symmetry modifications, interlayer interactions, and chemical reactions. A group-subgroup analysis suggests that CrSBr undergoes an orthorhombic Pmmn → monoclinic P2/m transition at 7.6 GPa, and based upon a comparison with model oxychlorides like FeOCl and CrOCl, we propose that changes in the pendant halide groups drive the system to a P2 1 /m-like space group above 15.3 GPa. Compression above 20.2 GPa is irreversible, resulting in the formation of an entirely new compound that is metastable for months. This work opens the door to the use of pressure and possibly strain to control the properties of CrSBr.

Microscopy↗
DOE OSTI2026

A metastable tetragonal phase in two-dimensional halide perovskite lattices driven by a coherent Higgs mode

The optoelectronic properties of metal halide perovskites are defined by their coupled structural and photophysical properties, yet their lattice behaviour remains underexplored. Here, using impulsive stimulated Raman spectroscopy, we study light-induced phonon dynamics of two-dimensional butylammonium lead iodide ((BA) 2 PbI 4 ) films under varying excitation intensities, photon energies and temperatures. We reveal that, whereas (BA) 2 PbI 4 exhibits two thermally accessible orthorhombic phases, optically excited phonons transiently direct the lattice to a distinct, higher symmetry tetragonal phase. We show that bandgap oscillations arise from simultaneous distortions of in-plane and out-of-plane octahedral tilt angles with oscillations following a low-to-high symmetry pathway, marked by two vibrational frequencies independent of intensity—a signature of an optically excited Higgs mode. Notably, the Higgs mode at below-bandgap excitation induces a fourfold larger spectral shift than above-bandgap, where photogenerated charge carriers drive the system away from the optically induced tetragonal phase. This study illustrates how optomechanical coupling influences the optical properties of two-dimensional perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Layer Hall effect in a 2D topological axion antiferromagnet

While ferromagnets have been known and exploited for millennia, antiferromagnets (AFMs) were only discovered in the 1930s. The elusive nature indicates AFMs' unique properties: At large scale, due to the absence of global magnetization, AFMs may appear to behave like any non-magnetic material; However, such a seemingly mundane macroscopic magnetic property is highly nontrivial at microscopic level, where opposite spin alignment within the AFM unit cell forms a rich internal structure. In topological AFMs, such an internal structure leads to a new possibility, where topology and Berry phase can acquire distinct spatial textures. Here, we study this exciting possibility in an AFM Axion insulator, even-layered MnBi 2 Te 4 flakes, where spatial degrees of freedom correspond to different layers. Remarkably, we report the observation of a new type of Hall effect, the layer Hall effect, where electrons from the top and bottom layers spontaneously deflect in opposite directions. Specifically, under no net electric field, even-layered MnBi 2 Te 4 shows no anomalous Hall effect (AHE); However, applying an electric field isolates the response from one layer and leads to the surprising emergence of a large layer-polarized AHE (~50e 2 /h). Such a layer Hall effect uncovers a highly rare layer-locked Berry curvature, which serves as a unique character of the space-time PT-symmetric AFM topological insulator state. Moreover, we found that the layer-locked Berry curvature can be manipulated by the Axion field, E∙B, which drives the system between the opposite AFM states. Our results achieve previously unavailable pathways to detect and manipulate the rich internal spatial structure of fully-compensated topological AFMs. The layer-locked Berry curvature represents a first step towards spatial engineering of Berry phase, such as through layer-specific moiré potential.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Three-state majority-vote model on small-world networks

Abstract In this work, we study the opinion dynamics of the three-state majority-vote model on small-world networks of social interactions. In the majority-vote dynamics, an individual adopts the opinion of the majority of its neighbors with probability 1- q , and a different opinion with chance q , where q stands for the noise parameter. The noise q acts as a social temperature, inducing dissent among individual opinions. With probability p , we rewire the connections of the two-dimensional square lattice network, allowing long-range interactions in the society, thus yielding the small-world property present in many different real-world systems. We investigate the degree distribution, average clustering coefficient and average shortest path length to characterize the topology of the rewired networks of social interactions. By employing Monte Carlo simulations, we investigate the second-order phase transition of the three-state majority-vote dynamics, and obtain the critical noise $$q_c$$ q c , as well as the standard critical exponents $$\beta /\nu$$ β / ν , $$\gamma /\nu$$ γ / ν , and $$1/\nu$$ 1 / ν for several values of the rewiring probability p . We conclude that the rewiring of the lattice enhances the social order in the system and drives the model to different universality classes from that of the three-state majority-vote model in two-dimensional square lattices.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Floquet engineering of Kitaev quantum magnets

Abstract In recent years, there has been an intense search for materials realizing the Kitaev quantum spin liquid model. A number of edge-shared compounds with strong spin-orbit coupling, such as RuCl 3 and iridates, have been proposed to realize this model. Nevertheless, an effective spin Hamiltonian derived from the microscopic model relevant to these compounds generally contains terms that are antagonistic toward the quantum spin liquid. This is consistent with the fact that the zero magnetic field ground state of these materials is generally magnetically ordered. It is a pressing issue to identify protocols to drive the system to the limit of the Kitaev quantum spin model. In this work, we propose Floquet engineering of these Kitaev quantum magnets by coupling materials to a circularly polarized laser. We demonstrate that all the magnetic interactions can be tuned in situ by the amplitude and frequency of the laser, hence providing a route to stabilize the Kitaev quantum spin liquid phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward using collective x-ray Thomson scattering to study C–H demixing and hydrogen metallization in warm dense matter conditions

The insulator–metal transition in liquid hydrogen is an important phenomenon to understand the interiors of gas giants, such as Jupiter and Saturn, as well as the physical and chemical behavior of materials at high pressures and temperatures. Here, the path toward an experimental approach is detailed based on spectrally resolved x-ray scattering, tailored to observe and characterize hydrogen metallization in dynamically compressed hydrocarbons in the regime of carbon–hydrogen phase separation. With the help of time-dependent density functional theory calculations and scattering spectra from undriven carbon samples collected at the European x-ray Free-Electron Laser Facility (EuXFEL), we demonstrate sufficient data quality for observing C–H demixing and investigating the presence of liquid metallic hydrogen in future experiments using the reprated drive laser systems at EuXFEL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Active oscillatory associative memory

Traditionally, physical models of associative memory assume conditions of equilibrium. Here, we consider a prototypical oscillator model of associative memory and study how active noise sources that drive the system out of equilibrium, as well as nonlinearities in the interactions between the oscillators, affect the associative memory properties of the system. Our simulations show that pattern retrieval under active noise is more robust to the number of learned patterns and noise intensity than under passive noise. To understand this phenomenon, we analytically derive an effective energy correction due to the temporal correlations of active noise in the limit of short correlation decay time. We find that active noise deepens the energy wells corresponding to the patterns by strengthening the oscillator couplings, where the more nonlinear interactions are preferentially enhanced. Using replica theory, we demonstrate qualitative agreement between this effective picture and the retrieval simulations. Our work suggests that the nonlinearity in the oscillator couplings can improve memory under nonequilibrium conditions.

Chemistry↗
DOE OSTI2020

Physics successfully implements Lagrange multiplier optimization

Optimization is a major part of human effort. While being mathematical, optimization is also built into physics. For example, physics has the Principle of Least Action; the Principle of Minimum Power Dissipation, also called Minimum Entropy Generation; and the Variational Principle. Physics also has Physical Annealing, which, of course, preceded computational Simulated Annealing. Physics has the Adiabatic Principle, which, in its quantum form, is called Quantum Annealing. Thus, physical machines can solve the mathematical problem of optimization, including constraints. Binary constraints can be built into the physical optimization. In that case, the machines are digital in the same sense that a flip–flop is digital. A wide variety of machines have had recent success at optimizing the Ising magnetic energy. We demonstrate in this paper that almost all those machines perform optimization according to the Principle of Minimum Power Dissipation as put forth by Onsager. Further, we show that this optimization is in fact equivalent to Lagrange multiplier optimization for constrained problems. We find that the physical gain coefficients that drive those systems actually play the role of the corresponding Lagrange multipliers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗